Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “low-frequency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

The onset of Alfvenic turbulence

An investigation is conducted on how low-frequency MHD oscillations in a warm plasma may undergo a transition from a coherent state to one of turbulence. A driven/dissipative derivative nonlinear Schroedinger equation is derived from the fluid equations. The time evolution of an arbitrary spectrum of waves is analyzed in the case where one k-mode is unstable, with the rest damped. It is found that the transition from order to chaos in the driven/dissipative system is correlated with the existence or absence of 'breathing' solitons in the associated conservative system.

Ghosh, S.↗
NASA NTRS1987

The acoustic radiation damping of the modes of a rectangular panel

The acoustic damping for single modes of a finite rectangular panel, simply supported in an infinite baffle, is theoretically determined from the ratio of the acoustic energy radiated per cycle to the vibratory energy of the panel. Asymptotic solutions for the low-frequency region are presented for a panel mode driven at an arbitrary frequency and for a panel mode vibrating at its natural frequency. Curves of acoustic damping for a panel mode vibrating at resonance, as a function of the panel thickness-to-length ratio, are presented for various panel aspect ratios. For panels vibrating below the critical frequency, the damping depends on the aspect ratio with square panels developing the smallest value. For panels vibrating above the critical frequency, the damping is nearly independent of the aspect ratio.

Wallace, C. E.↗
NASA NTRS1985

On helicopter rotor low frequency broadband noise

The effect of shear-layer-type inflow turbulence on the low-frequency broadband noise of a model helicopter rotor is experimentally studied. The measurements and the one-dimensional energy spectral density indicate that the upstream airfoil wake turbulence is nonisotropic, but approaches isotropy at high wavenumbers. Turbulence measurements also indicate that the wake turbulence is weak. The effect of the inflow turbulence intensity on the peak sound pressure level follows an intensity-velocity squared scaling law. A number of length scales and turbulence intensities exist which can be measured in the airfoil wake depending on the position at which the measurements are taken. Comparison of experimental and theoretical sound pressure power spectral densities indicates that the initial anisotropy of the inflow turbulence does not invalidate the isotropic turbulence assumption made in noise prediction models as long as measured turbulence intensities and length scales are used.

Williams, Morgan↗
NASA NTRS1987

Observations of annual and El Nino thermal and flow variations at 0 deg, 110 deg W and 0 deg, 95 deg W during 1980-1985

The paper describes the low-frequency (i.e., time scales longer than a month) upper ocean (above 250 m) current and temperature moored measurements conducted from March 1980 to September 1985 at 0, 110 deg W and from July 1981 to November 1983 (i.e., including the period of the 1982-1983 El Nino) at 0, 95 deg W. Estimates of the annual cycle were removed from the observations to determine the current and temperature fluctuations due to the 1982-1983 El Nino. The circulation of the upper ocean was found to be dramatically altered during the El Nino: the normally westward flowing surface current in autumn months reversed direction, and the equatorial undercurrent, normally considered to be a permanent feature, disappeared. Associated with the El Nino was a massive redistribution of heat throughout the mixed layer and the thermocline.

Halpern, David↗
NASA NTRS1987

Energetic interplanetary shocks, radio emission, and coronal mass ejections

The interplanetary shocks which generate detectable low-frequency radio emission, represent as a group, the most energetic shocks produced by the sun. For all interplanetary (IP) shocks which generated so-called IP type II events, the associated solar events involved fast coronal mass ejections (CMEs). In comparison with the set of all CMEs detected by the Solwind coronagraph, the CMEs associated with IP type II events are the most massive and energetic. The majority belong to the structural classes described by the Solwind researchers as 'curved front' or 'halo'.

Cane, H. V.↗
NASA NTRS1987

Driving mechanism of unsteady separation shock motion in hypersonic interactive flow

Wall pressure fluctuations were measured under the steady separation shock waves in Mach 5 turbulent interactions induced by unswept circular cylinders on a flat plate. The wall temperature was adiabatic. A conditional sampling algorithm was developed to examine the statistics of the shock wave motion. The same algorithm was used to examine data taken in earlier studies in the Princeton University Mach 3 blowdown tunnel. In these earlier studies, hemicylindrically blunted fins of different leading-edge diameters were tested in boundary layers which developed on the tunnel floor and on a flat plate. A description of the algorithm, the reasons why it was developed and the sensitivity of the results to the threshold settings, are discussed. The results from the algorithm, together with cross correlations and power spectral density estimates suggests that the shock motion is driven by the low-frequency unsteadiness of the downstream separated, vortical flow.

Dolling, D. S.↗
NASA NTRS1987

Low frequency VLBI in space using GAS-Can satellites: Report on the May 1987 JPL Workshop

Summarized are the results of a workshop held at JPL on May 28 and 29, 1987, to study the feasibility of using small, very inexpensive spacecraft for a low-frequency radio interferometer array. Many technical aspects of a mission to produce high angular resolution images of the entire sky at frequencies from 2 to 20 MHz were discussed. The workshop conclusion was that such a mission was scientifically valuable and technically practical. A useful array could be based on six or more satellites no larger than those launched from Get-Away-Special canisters. The cost of each satellite could be $1-2M, and the mass less than 90 kg. Many details require further study, but as this report shows, there is good reason to proceed. No fundamental problems have been discovered involving the use of untraditional, very inexpensive spacecraft for this type of mission.

Mahoney, M. J.↗
NASA NTRS1987

Large-scale fluctuations between 13 AU and 25 AU and their effects on cosmic rays

The reasons for the temporal and latitudinal large-scale fluctuations in the magnetic-field strength observed between 13 and 25 AU by Voyagers 1 and 2 in 1984-1985, and their effect on the cosmic ray intensity profile are investigated. The study of low-frequency and intermediate-frequency fluctuations determined from magnetic-field-intensity profile suggests the presence of discontinuities near the equator during both years. The intensity of cosmic ray nuclei of greater than 75 MeV during 1984 was found to fluctuate about a constant value, because the decreases of intensity caused by the passage of large merged interaction regions balanced the increases of intensity associated with rarefied regions. The intensity of cosmic ray nuclei above 75 MeV increased during 1985 because there were few large interactions then. The cosmic ray intensity increased more rapidly at low than at high latitudes. The model of Burlaga et al. (1985) was found to provide good first-order fits to the cosmic ray intensity profiles.

Burlaga, L. F.↗
NASA NTRS1987

Shock overshoots revisited

The ISEE 1 and 2 magnetometer and solar wind data for about 65 quasi-perpendicular bow shocks were used to investigate the role played by low-frequency turbulence in the determination of magnetic field overshoots in collisionless shock waves. Overshoots calculated from both high-resolution data and data averaged to eliminate the effects of turbulence exhibited similar behavior, but the overshoots calculated from the averaged data were generally lower by a factor of 2. Moreover, the size of overshoots calculated from the high-resolution data increased much more strongly with Mach number than that of overshoots calculated from averaged data. The difference between overshoots measured by the two sets of data was generally consistent with the presence of a component of overshoot magnitude due to low-frequecy turbulence.

Mellott, M. M.↗
NASA NTRS1987

Resonant interactions between cometary ions and low frequency electromagnetic waves

The conditions for resonant wave amplification in a plasma with a ring-beam distribution which is intended to model pick-up ions in a cometary environment are investigated. The inclination between the interplanetary field and the solar wind is found to play a crucial role in governing both the resonant frequency and the growth rate of any unstable mode. It is suggested that the low-frequency MHD mode should experience the most rapid amplification for intermediate inclination. In the frame of the solar wind, such waves should propagate along the field in the direction upstream toward the sun with a phase speed lower than the beaming velocity of the pick-up ions. This mechanism may account for the presence of the interior MHD waves noted by satellites over a region surrounding comets Giacobini-Zinner and Halley.

Thorne, Richard M.↗
NASA NTRS1987

NDE of Space Shuttle Solid Rocket Motor field joint

One of the most critical areas for inspection in the Space Shuttle Solid Rocket Motors is the bond between the steel case and rubber insulation in the region of the field joints. The tang-and-clevis geometry of the field joints is sufficiently complex to prohibit the use of resonance-based techniques. One approach we are investigating is to interrogate the steel-insulation bondline in the tang and clevis regions using surface-travelling waves. A low-frequency contact surface wave transmitting array transducer is under development at our laboratory for this purpose. The array is placed in acoustic contact with the steel and surface waves are launched on the inside surface or the clevis leg which propagate along the steel-insulation interface. As these surface waves propagate along the bonded surface, the magnitude of the ultrasonic energy leaking into the steel is monitored on the outer surface of the case. Our working hypothesis is that the magnitude of energy received at the outer surface of the case is dependent upon the integrity of the case-insulation bond, with less attenuation for propagation along a disbond due to imperfect acoustic coupling between the steel and rubber. Measurements on test specimens indicate a linear relationship between received signal amplitude and the length of good bend between the transmitter and receiver, suggesting the validity of this working hypothesis.

Patrick H. Johnston↗
NASA NTRS1983

Improved fabrication techniques for infrared bolometers

Techniques are described for producing improved infrared bolometers from doped germanium. Ion implantation and sputter metalization have been used to make ohmic electrical contacts to Ge:Ga chips. This method results in a high yield of small monolithic bolometers with very little low-frequency noise. When one of these chips is used as the thermometric element of a composite bolometer, it must be bonded to a dielectric substrate. The thermal resistance of the conventional epoxy bond has been measured and found to be undesirably large. A procedure for soldering the chip to a metalized portion of the substrate is described which reduced this resistance. The contribution of the metal film absorber to the heat capacity of a composite bolometer has been measured. The heat capacity of a NiCr absorber at 1.3 K can dominate the bolometer performance. A Bi absorber has significantly lower heat capacity. A low temperature blackbody calibrator has been built to measure the optical responsivity of bolometers. A composite bolometer system with a throughput of approx. 0.1 sr sq cm was constructed using the new techniques. In negligible background it has an optical NEP of 3.6 10((exp -15) W/sq root of Hz at 1.0 K with a time constant of 20 ms. The noise in this bolometer is white above 2.5 Hz and is somewhat below the value predicted by thermodynamic equilibrium theory. It is in agreement with calculations based on a recent nonequilibrium theory.

Lange, A. E.↗
NASA NTRS1948

Transonic-flutter Investigation of Wings Attached to Two Low-acceleration Rocket-propelled Vehicles

Two low-acceleration transonic-flutter vehicles were launched and flown. The first carried two test wings, one of which fluttered at M = 0.92 at a frequency of 61.4 cycles per second. The reference flutter speed determined from two-dimensional theory for an unswept wing in incompressible flow is conservative when compared to the experimental flutter speed. The second vehicle carried two test wings, one of which failed at M = 0.71 because of low-frequency divergent oscillation. Since this failure was not caused by conventional flexure-torsion flutter, no comparison with a reference flutter speed can be made.

MISSILES, SPECIFIC TYPES↗
NASA NTRS1961

Balancing Vanguard Satellites

The Vanguard satellites and component parts were balanced within the specified limits by using a Gisholt Type-S balancer in combination with a portable International Research and Development vibration analyzer and filter, with low-frequency pickups. Equipment and procedures used for balancing are described; and the determination of residual imbalance is accomplished by two methods: calculation, and graphical interpretation. Between-the-bearings balancing is recommended for future balancing of payloads.

Simkovich, A.↗
NASA NTRS1959

Analysis of of Injection-Velocity Effects on Rocket Motor Dynamics and Stability

A concept of combustion time lag that includes dependency on injection velocity is introduced. The concept is used in the formulation of chamber transfer functions and in an analysis of low-frequency combustion instability. Theoretical frequency responses and stability boundaries are compared with those obtained when the injection-velocity effect on the time lag to be an important consideration, in the theory of chamber dynamics and combustion instability

Hurrell, Herbert G.↗
NASA NTRS1961

Near-Field and Far-Field Noise Measurements for a Blowdown-Wind-Tunnel Supersonic Exhaust Jet having about 475,000 Pounds of Thrust

Near-field and far-field noise surveys were made of the supersonic The exhaust jet of the Langley 9- by 6-foot thermal structures tunnel. The jet had a thrust rating of approximately 475,000 pounds. The sound power radiated was found to be about 3.6 x 10(exp 6) watts, and on an acoustical-mechanical efficiency basis this value is in reasonable agreement with data for smaller supersonic jets and for rocket engines of other investigations. Octave-band analyses of the near-field noise show that the maximum sound pressure levels in the low-frequency bands are greatest downstream, whereas maximum sound pressure levels in the high-frequency bands were greatest near the jet exit. A comparison of near-field noise measurements is made with data previously obtained for rocket engines. Noise survey measurements of the original jet are compared with similar data obtained after the addition of a 97-foot-long exit diffuser section, and an example of the application of this facility to the problem of acoustic environmental testing of a large space capsule is cited.

Mayes, William H.↗
DOE OSTI2026

Fermilab PIP II machine protection system digitized data noise elimination scheme and its FPGA implementation

In Fermilab's PIP-II machine protection system, beam loss signals from various detectors are digitized at 125 MS/s. Noise from both high-frequency sources and low-frequency 60 Hz AC power equipment can contaminate the data. To suppress noise across these ranges especially 60 Hz and its harmonics, which overlap with beam loss signal frequencies advanced digital processing beyond standard filtering is required. Several real-time functional blocks were simulated and tested on an FPGA: (1) a dual time-constant discharging integrator filter, (2) a de-ripple baseline extraction and storage block, and (3) a fast-recovery discharging integrator. The nonlinear IIR integrator filter removes high-frequency noise and feeds into the baseline extractor. Upon detecting abrupt beam loss, it switches to a longer time constant to prevent baseline distortion. The de-ripple block calculates a valid baseline by averaging over multiple 60 Hz periods, storing results in a 4096-word FPGA RAM. This baseline is subtracted from raw data before integration by the fast-recovery block, which resets quickly after use. All blocks achieved expected performance.

Wu, J. [Fermilab] (ORCID:0000000344329521)↗
DOE OSTI2025

A stable potential-based time-domain method for wideband elec- tromagnetic analysis

In previous research, the frequency-domain A-ϕ formulation has been validated using the finite element method for electromagnetic simulations of low-frequency and multi- scale problems, demonstrating excellent numerical accuracy, good matrix condition, and high computational efficiency. Time- domain simulations provide significant advantages for modeling wideband problems and are crucial for multiphysics applications. In this paper, the frequency-domain A-ϕ formulation is extended to the time domain. The central difference scheme is employed for temporal discretization to ensure both accuracy and stability. A numerical example is presented to demonstrate the capability of the proposed time-domain method in wideband electromagnetic analysis.

Mekonnen, Minyichil↗