Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lamination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

The characterization of Mode I delamination failure in non-woven, multidirectional laminates

The uniform double cantilever beam test and SEM are presently used for the characterization of Mode I delamination behavior in fiber-reinforced epoxy laminates. Delamination failure assumes forms that depend on ply orientation, test specimen geometry, and matrix toughness, but the calculated fracture energy is noted to be heavily dependent on fracture surface morphology. A material property concept that is independent of both test specimen geometry and the orientation of the plies constituting the delaminating interface is elucidated, through the definition of interlaminar fracture solely in terms of an interlaminar separation that includes no fiber breakage or pull-out. This value, which dissipates the lowest possible amount of energy during crack growth, is the controlling factor for laminate toughness.

Chai, H.↗
NASA NTRS1984

Analysis of laminated composite shells using a degenerated 3-D element

A special three-dimensional element based on the total Lagrangian description of the motion of a layered anisotropic composite medium is developed, validated and employed to analyze laminated anisotropic composite shells. The element contains the following features: geometric nonlinearity, dynamic (transient) behavior and arbitrary lamination scheme and lamina properties. Numerical results of nonlinear bending, natural vibration, and transient response are presented to illustrate the capabilities of the element.

Chao, W. C.↗
NASA NTRS1984

A simple higher-order theory for laminated composite plates

A higher-order shear deformation theory of laminated composite plates is developed. The theory contains the same dependent unknowns as in the first-order shear deformation theory of Whitney and Pagano (1970), but accounts for parabolic distribution of the transverse shear strains through the thickness of the plate. Exact closed-form solutions of symmetric cross-ply laminates are obtained and the results are compared with three-dimensional elasticity solutions and first-order shear deformation theory solutions. The present theory predicts the deflections and stresses more accurately when compared to the first-order theory.

Reddy, J. N.↗
NASA NTRS1985

Nonlinear analysis of laminated shells including transverse shear strains

Numerical results obtained using a doubly curved, shear deformable shell element are presented for geometrically nonlinear analysis of laminated composite shells. The element is based on an extension of Sanders' shell theory and accounts for the von Karman strains and transverse shear strains. The sample numerical results presented here for the geometrically nonlinear analysis of laminated composite shells should serve as references for future investigations.

Reddy, J. N.↗
NASA NTRS1985

Use of statical indentation laws in the impact analysis of laminated composite plates

The low-velocity impact response of graphite/epoxy laminates was investigated theoretically and experimentally. A nine-node isoparametric plate finite element in conjunction with an empirical contact law was used for the theoretical investigation. Theoretical results are in good agreement with strain-gage experimental data. The results of the investigation indicate that the present theoretical procedure describes the impact response of laminate for low-impact velocities.

Tan, T. M.↗
NASA NTRS1983

Detection of acoustic emission from composite laminates using PVF2 transducers

Polyvinylidene fluoride (PVF2), a semicrystalline polymer exhibiting piezoelectricity, is presently used as a sensing transducer in acoustic emission (AE) monitoring of several different composite laminate materials in order to obtain both quasi-static and fatigue loading results. AE signals obtained from PVF2 transducers are compared with those obtained by standard AE sensors. It is noted that PVF2 transducers may, through the application of spectral signal analysis, be able to distinguish between two distinct failure modes which have been observed in two composite laminates of the same material, but employing different lamina stacking sequences.

Stiffler, R.↗
NASA NTRS1985

Large deflection behavior of quasi-isotropic laminates under low-velocity impact type point loading

Eight-ply quasi-isotropic circular composite plates of Thornel 300 graphite in Narmco 5208 epoxy resin (T300/5208) were analyzed to obtain the large deformation behavior under low-velocity impact type point loads. A simple plate-membrane coupling model was developed. The impact type point loads were replaced by equivalent quasi-static point loads. The plate-membrane coupling model was used to obtain the large deformation shapes for the thin circular composite laminates. The analyses indicated that the large deformation shapes of the composite plates under point loads vary with the center point displacements, and hence are different for different load levels. Quasi-isotropic plates were analyzed by replacing anisotropic bending stiffness components with the equivalent flexural stiffness for the isotropic plates. The plate-membrane coupling model was verified by conducting a series of tests on clamped circular quasi-isotropic laminates. Deflected shapes for the thin composite plates were experimentally obtained. These shapes agreed well with the analytically predicted shapes.

Kelkar, A.↗
NASA NTRS1985

Effects of transverse shearing on cylindrical bending, vibration, and buckling of laminated plates

The displacements for cylindrical bending and stretching of laminated and thick plates are expressed through-the-thickness by a few algebraic terms and a complete set of trigonometric terms. Only a few terms of this series are needed to get sufficiently accurate results for laminated and thick plates. Equations of equilibrium based on a sufficient number of terms of this series for displacements are determined using variational theorems from three-dimensional elasticity. Several examples are worked out. The displacements and stresses are obtained for simply supported isotropic and layered beams with a rectangular cross section and a sinusoidal lateral load distribution. These results are compared to an exact elasticity solution. Results for several approximations are obtained for a simply supported and a clamped beam with a rectangular cross section loaded at the center and results are compared to experimental results. Results are also obtained for isotropic and layered beams with a rectangular cross section for several approximations for the lowest natural frequency and buckling load.

Stein, M.↗
NASA NTRS1984

Strain-energy release rate analysis of cyclic delamination growth in compressively loaded laminates

Delamination growth in compressively loaded composite laminates was studied analytically and experimentally. The configuration used was a laminate with an across-the-width delamination. An approximate super-position stress analysis was developed to quantify the effects of various geometric, material, and load parameters on mode 1 and mode 2 strain energy release rates G sub 1 and G sub 2, respectively. Calculated values of G sub 1 and G sub 2 were then compared with measured cyclic delamination growth rates to determine the relative importance of G sub 1 and G sub 2. High growth rates were observed only when G sub 1 was large. However, slow growth was observed even when G sub 1 was negligibly small. This growth was apparently due to a large value of G sub 2.

Whitcomb, J. D.↗
NASA NTRS1985

Analysis of impact response of buckled composite laminates

The dynamic response of buckled composite plates impacted by a hard object is studied. A nine-node isoparametric finite element, developed based on the Mindlin plate theory and von Karman large deflection assumptions, is used for both postbuckling and impact analyses. In order to evaluate the contact force, an experimentally established contact law which accounts for the permanent indentation is employed. The static postbuckling problem of laminated plates is first considered. The impact responses include contact force histories, dynamic deflections, and dynamic strains in the plate for various buckling conditions. In addition, free vibration of buckled laminated plates is also solved to determine the range of natural frequencies which are needed to choose a proper time increment for time integration in the impact analysis.

Chen, J. K.↗
NASA NTRS1985

A study of interply layer effects on the free edge stress field of angleplied laminates

The general-purpose finite-element program MSC/NASTRAN is used to study the interply layer effects on the free-edge stress field of symmetric angleplied laminates subjected to uniform tensile stress. The free-edge region is modeled as a separate substructure (superelement) which enables easy mesh refinement and provides the flexibility to move the superelement along the edge. The results indicate that the interply layer reduces the stress intensity significantly at the free edge. Another important observation of the study is that the failures observed near free edges of these types of laminates could have been caused by the interlaminar shear stresses.

Murthy, P. L. N.↗
NASA NTRS1984

Quantitative assessment of damage growth in graphite epoxy laminates by acousto-ultrasonic measurements

The acoustoultrasonic NDT method proposed by Vary (1976, 1978) for composite laminate damage growth quantitative assessment can both respond to the development of damage states and furnish quantitative parameters that monitor this damage development. Attention is presently given to data obtained for the case of quasi-static loading and fatigue testing of graphite-epoxy laminates. The shape parameters of the power spectral density for the ultrasonic signals correlate well with such other indications of damage development as stiffness degradation.

Talreja, R.↗
NASA NTRS1985

Fiberglass epoxy laminate fatigue properties at 300 and 20 K

A subcritical liquid hydrogen orbital storage and supply experiment is being designed for flight in the Space Shuttle cargo bay. The Cryogenic Fluid Management Experiment (CFME) includes a liquid hydrogen tank supported in a vacuum jacket by two fiberglass epoxy composite trunnion mounts. The ability of the CFME to last for the required seven missions depends primarily on the fatigue life of the composite trunnions at cryogenic temperatures. To verify the trunnion design and test the performance of the composite material, fatigue property data at 300 and 20 K were obtained for the specific E-glass fabric/S-glass unidirectional laminate that will be used for the CFME trunnions. The fatigue life of this laminate was greater at 20 K than at 300 K, and was satisfactory for the intended application.

Toth, J. M., Jr.↗
NASA NTRS1985

Hygrothermal influence on delamination behavior of graphite/epoxy laminates

The hygrothermal effect on the fracture behavior of graphite-epoxy laminates was investigated to develop a methodology for damage tolerance predictions in advanced composite materials. Several T300/934 laminates were tested using a number of specimen configurations to evaluate the effects of temperature and humidity on delamination fracture toughness under mode 1 and mode 2 loading. It is indicated that moisture has a slightly beneficial influence on fracture toughness or critical strain energy release rate during mode 1 delamination, but has a slightly deleterious effect on mode 2 delamination, and mode 1 transverse cracking. The failed specimens are examined by SEM and topographical differences due to fracture modes are identified. It is concluded that the effect of moisture on fracture topography can not be distinguished.

Garg, A.↗
NASA NTRS1985

Iosipescu shear properties of graphite fabric/epoxy composite laminates

The Iosipescu shear test method is used to measure the in-plane and interlaminar shear properties of four T300 graphite fabric/934 epoxy composite materials. Different weave geometries tested include an Oxford weave, a 5-harness satin weave, an 8-harness satin weave, and a plain weave with auxiliary warp yarns. Both orthogonal and quasi-isotropic layup laminates were tested. In-plane and interlaminar shear properties are obtained for laminates of all four fabric types. Overall, little difference in shear properties attributable to the fabric weave pattern is observed. The auxiliary warp material is significantly weaker and less stiff in interlaminar shear parallel to its fill direction. A conventional strain gage extensometer is modified to measure shear strains for use with the Iosipescu shear test. While preliminary results are encouraging, several design iterations failed to produce a reliable shear transducer prototype. Strain gages are still the most reliable shear strain transducers for use with this test method.

Walrath, D. E.↗
NASA NTRS1986

A refined shear deformation theory for the analysis of laminated plates

A refined, third-order plate theory that accounts for the transverse shear strains is presented, the Navier solutions are derived for certain simply supported cross-ply and antisymmetric angle-ply laminates, and finite-element models are developed for general laminates. The new theory does not require the shear correction factors of the first-order theory (i.e., the Reissner-Mindlin plate theory) because the transverse shear stresses are represented parabolically in the present theory. A mixed finite-element model that uses independent approximations of the generalized displacements and generalized moments, and a displacement model that uses only the generalized displacements as degrees of freedom are developed. The displacement model requires C sup 1-continuity of the transverse deflection across the inter-element boundaries, whereas the mixed model requires a C sup 0-element. Also, the mixed model does not require continuous approximations (between elements) of the bending moments. Numerical results are presented to show the accuracy of the present theory in predicting the transverse stresses. Numerical results are also presented for the nonlinear bending of plates, and the results compare well with the experimental results available in the literature.

Reddy, J. N.↗
NASA NTRS1985

Composite laminate free edge reinforcement concepts

The presence of a free edge in a laminated composite structure can result in delamination of the composite under certain loading conditions. Linear finite element analysis predicts large or even singular interlaminar stresses near the free edge. Edge reinforcements which will reduce these interlaminar stresses, prevent or delay the onset of delaminations, and thereby increase the strength and life of the structure were studied. Finite element models are used to analyze reinforced laminates which were subsequently fabricated and loaded to failure in order to verify the analysis results.

Howard, W. E.↗