Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “iron oxides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

The soils of Mars

A mineralogical model for the Mars fine soil that includes as major components smectite clays absorbed and coated with amorphous iron oxyhydroxides and perhaps mixed with small amounts of better-crystalized iron oxides as separate phases is proposed. Also present as accessory minerals are sulfate minerals such as kieserite (MgSO4.H2O) and/or anhydrite (CaSO4), rutile (TiO2), and maghemite (Fe2O3) or magnetite (Fe3O4), the last two as magnetic components. Carbonates may be present at low concentrations only (less than 1 to 2 pct). However, a prime question to be addressed by a Mars Sample Return Mission shall be related to the mineralogical composition of the soil, and its spatial variability.

Banin, A.↗
NASA NTRS1987

Phase relations in iron-rich systems and implications for the earth's core

Recent experimental data concerning the properties of iron, iron sulfide, and iron oxide at high pressures are combined with theoretical arguments to constrain the probable behavior of the Fe-rich portions of the Fe-O and Fe-S phase diagrams. Phase diagrams are constructed for the Fe-S-O system at core pressures and temperatures. These properties are used to evaluate the current temperature distribution and composition of the core.

Anderson, William W.↗
NASA NTRS1988

Detection techniques using multispectral data to index soil erosional status

Indexing techniques that can be used to detect soil erosion utilizing the known band widths of the Landsat MSS and TM sensors are identified. The indexing techniques focus on iron oxides, clays, and organic matter as properties revealing soil erosional status. For data aquisition, a Collins visible and infrared intelligent spectrometer was used to collect data from 0.4-24 microns. Pressed polytetrafluorethylene was used as the reflectance standard and was aquired at the same time that the sample data were aquired.

Pelletier, R. E.↗
NASA NTRS1989

Remote sensing of soils in the eastern Palouse region with Landsat Thematic Mapper

Soils of the Palouse region of eastern Washington State were investigated using Landsat Thematic Mapper (TM) band ratios to discriminate areas where erosion has caused paleosols to be exposed. Ratioed data were clustered and plotted to show soil lines which could be subdivided into various levels of organic matter and iron oxides. Successfully classified scenes of a summer fallow (bare soil) field were obtained with band ratios 1/4, 3/4, and 5/4 to map organic carbon and 3/4, 5/4, and 5/3 for the iron/carbon ratio indicator of erosion. Regression models were made with 5/4 data and organic carbon and 5/3 data and the iron/carbon ratio. Based on this analysis, 21 percent of the test field soils are exposed or nearly exposed paleosols.

Frazier, B. E.↗
NASA NTRS1989

Phyllosilicate absorption features in main-belt and outer-belt asteroid reflectance spectra

Absorption features having depths up to 5 percent are identified in high-quality, high-resolution reflectance spectra of 16 dark asteroids in the main belt and in the Cybele and Hilda groups. Analogs among the CM2 carbonaceous chondrite meteorites exist for some of these asteroids, suggesting that these absorptions are due to iron oxides in phyllosilicates formed on the asteroidal surfaces by aqueous alteration processes. Spectra of ten additional asteroids, located beyond the outer edge of the main belt, show no discernible absorption features, suggesting that aqueous alteration did not always operate at these heliocentric distances.

Vilas, Faith↗
NASA NTRS1991

Options for Martian propellant production

A quantitative evaluation methodology for utilizing in-situ resources on Mars for the production of useful substances. The emphasis is on the chemical processes. Various options considering different feedstock (mostly, carbon dioxide, water, and iron oxides) are carefully examined for the product mix and the energy needs. Oxygen, carbon monoxide, alcohols, and other chemicals are the end products. The chemical processes involve electrolysis, methanation, and variations. It is shown that maximizing the product utility is more important than the production of oxygen, methane, or alcohols. An important factor is the storage of the chemicals produced. The product utility is dependent, to some extent, upon the mission. A combination of the stability, the enthalpy of formation, and the mass fraction of the products is seen to yield a fairly good quantitative feel for the overall utility and maximum mission impact.

Dowler, Warren↗
NASA NTRS1990

Process engineering concerns in the lunar environment

The paper discusses the constraints on a production process imposed by the lunar or Martian environment on the space transportation system. A proposed chemical route to produce oxygen from iron oxide bearing minerals (including ilmenite) is presented in three different configurations which vary in complexity. A design for thermal energy storage is presented that could both provide power during the lunar night and act as a blast protection barrier for the outpost. A process to release carbon from the lunar regolith as methane is proposed, capitalizing on the greater abundance and favorable physical properties of methane relative to hydrogen to benefit the entire system.

Sullivan, T. A.↗
NASA NTRS1990

Magnetic beneficiation of highland and hi-Ti mare soils - Magnet requirements

Magnetic beneficiation of immature highland soil 67511 recovered 22 wt pct of the sample with an iron oxide content of 0.6 pct. Magnetic isolates of immature highland soils are candidates for the manufacture of silicon, aluminum, and other metals. Fifty-seven percent of the ilmenite in immature mare soil 71061 was recovered in magnetic processing. Ilmenite can be recovered by magnetic separation but may be difficult to 'high'grade'. A parametric description is given of magnetic separators suitable for supplying ilmenite for the production of 22.7 metric tons per year oxygen.

Oder, R. R.↗
NASA NTRS1991

Program and Abstracts for Clay Minerals Society 28th Annual Meeting

This volume contains abstracts that were accepted for presentation at the annual meeting. Some of the main topics covered include: (1) fundamental properties of minerals and methods of mineral analysis; (2) surface chemistry; (3) extraterrestrial clay minerals; (4) geothermometers and geochronometers; (5) smectite, vermiculite, illite, and related reactions; (6) soils and clays in environmental research; (7) kaolinite, halloysite, iron oxides, and mineral transformations; and (8) clays in lakes, basins, and reservoirs.

Source record↗
NASA NTRS1991

Clays on Mars: Review of chemical and mineralogical evidence

Mafic igneous bedrock is inferred for Mars, based on spectrophotometric evidence for pyroxene (principally in optically dark areas of the globe) and the pyroxenite-peridotite petrology of shergottite nakhlite chassignite (SNC) meteorites. Visible and infrared spectra of reddish-brown surface fines (which dominate Martian bright areas) indicate ferric iron and compare favorably (though not uniquely) with spectra of palagonitic soils. Laboratory studies of SNC's and Viking Lander results support a model for Martian soil based on chemical weathering of mafic rocks to produce layer structured silicates (clay minerals), salts, and iron oxides.

Banin, Amos↗
NASA NTRS1991

Transformation products of submicron-sized aluminum-substituted magnetite: Color and reductant solubility

Magnetite, when present as fine particles, is soluble in acid ammonium oxalate (pH equals 3). However, the commonly used extractant for free iron oxides (i.e., citrate dithionite-bicarbonate (CDB) is not very effective in dissolving magnetite in soils and geologic materials. Upon oxidation, magnetite transforms to maghemite; at elevated temperatures, maghemite inverts to hematite. This transformation causes a change in color from black to red and may affect the reductant solubility as well. The objectives here were to examine the color and reflectance spectral characteristics of products during the transformation of magnetite to maghemite to hematite and to study the effect of Al-substitution in magnetite on the above process. Reductant solubility of Al-substituted magnetite, maghemite, and hematite was also studied. In summary, the transformation of magnetite to maghemite was accompanied by a change in color from black to red because of the oxidation of Fe2(+) to Fe3(+). The phase change maghemite to hematite had a relatively minor effect on the color and the reflectance spectra.

Golden, D. C.↗
NASA NTRS1991

Use of high spectral resolution airborne visible/infrared imaging spectrometer data for geologic mapping: An overview

Specific examples of the use of AVIRIS (Airborne Visible/Infrared Imaging Spectrometer) high spectral resolution data for mapping, alteration related to ore deposition and to hydrocarbon seepage, and alluvial fans are presented. Correction for atmospheric effects was performed using flat field correction, log residuals, and radiative transfer modeling. Minerals of interest (alunite, kaolinite, gypsum, carbonate iron oxides, etc.) were mapped based upon the wavelength position, depth and width of characteristic absorption features. Results were checked by comparing to existing maps, results from other sensors (Thematic Mapper (TM) and TIMS (Thermal Infrared Multispectral Scanner)), and laboratory spectra of samples collected in the field. Alteration minerals were identified and mapped. The signal to noise ratio of acquired AVIRIS data, long to 2.0 microns, was insufficient to map minerals of interest.

Carrere, Veronique↗
NASA NTRS1991

Integration of visible-through microwave-range multispectral image data sets for geologic mapping

Multispectral remote sensing data sets collected during the Geologic Remote Sensing Field Experiment (GRSFE) conducted during 1989 in the southwestern U.S. were used to produce thematic image maps showing details of the surface geology. LANDSAT TM (Thematic Mapper) images were used to map the distribution of clays, carbonates, and iron oxides. AVIRIS (Airborne Visible/Infrared Imaging Spectrometer) data were used to identify and map calcite, dolomite, sericite, hematite, and geothite, including mixtures. TIMS (Thermal Infrared Multispectral Scanner) data were used to map the distribution of igneous rock phases and carbonates based on their silica contents. AIRSAR (Airborne Synthetic Aperture Radar) data were used to map surface textures related to the scale of surface roughness. The AIRSAR also allowed identification of previously unmapped fault segments and structural control of lithology and minerology. Because all of the above data sets were geographically referenced, combination of different data types and direct comparison of the results with conventional field and laboratory data sets allowed improved geologic mapping of the test site.

Kruse, Fred A.↗
NASA NTRS1991

Compositional studies of primitive asteroids

The aqueous alteration history in the solar system are studied through acquiring additional CCD reflectance spectra in the blue-UV through near-IR spectral region and analyzing these spectra for information about iron oxides in phyllosilicates identified in the CM and CI carbonaceous chondrites. Emphasis is on the main-belt and Cybele primitive asteroids, as these asteroids show spectral diversity and are also spectral analogues for known meteorite samples. The porphyrin bands found in organics near 0.4 micron is also sought.

Vilas, Faith↗
NASA NTRS1992

Characterization of radiation-induced damage in high performance polymers by electron paramagnetic resonance imaging spectroscopy

The potential for long-term human activity beyond the Earth's protective magnetosphere is limited in part by the lack of detailed information on the effectiveness and performance of existing structural materials to shield the crew and spacecraft from highly penetrating space radiations. The two radiations of greatest concern are high energy protons emitted during solar flares and galactic cosmic rays which are energetic ions ranging from protons to highly oxidized iron. Although the interactions of such high-energy radiations with matter are not completely understood at this time, the effects of the incident radiation are clearly expected to include the formation of paramagnetic spin centers via ionization and bond-scission reactions in the molecular matrices of structural materials. Since this type of radiation damage is readily characterized by Electron Paramagnetic Resonance (EPR) spectroscopy, the NASA Langley Research Center EPR system was repaired and brought on-line during the 1991 ASEE term. A major goal of the 1992 ASEE term was to adapt the existing core of the LaRC EPR system to meet the requirements for EPR Imaging--a powerful new technique which provides detailed information on the internal structure of materials by mapping the spatial distribution of unpaired spin density in bulk media. Major impetus for this adaptation arises from the fact that information derived from EPRI complements other methods such as scanning electron microscopy which primarily characterize surface phenomena. The modification of the EPR system has been initiated by the construction of specially designed, counterwound Helmholtz coils which will be mounted on the main EPR electromagnet. The specifications of the coils have been set to achieve a static linear magnetic field gradient of 10 gauss/mm/amp along the principal (Z) axis of the Zeeman field. Construction is also in progress of a paramagnetic standard in which the spin distribution is known in all three dimensions. This sample will be used to assess the linearity of the magnetic field gradient and to ensure authentic image reconstruction. A second major task was to secure the computer capability to enable image reconstruction from projection data generated by the magnetic field gradients. To this end, commercially available and public domain software packages which perform inverse Fourier Transform and convoluted (filtered) back projection functions are being integrated into the existing EPR data processing system.

Suleman, Naushadalli K.↗
NASA NTRS1992

The mineralogy and formation processes of Mars soil

The mineralogical nature of Mars soil is far from being understood, nor are the formation time and weathering processes known. Quantitatively, the two major mineral-forming elements in Mars soil are silicon and iron, constituting 44 and 19 percent of the soils as SiO4 and Fe2O3, respectively. The silicate phases have been studied only briefly, mostly because of their limited spectral fingerprinting in the VIS and NIR. Much attention was given to the iron minerals in the soil, due to their pronounced absorption in the VIS and NIR, making them easily detectable by telescopic observations. The available information on Mars soil mineralogy, mostly obtained by remote sensing, is reviewed, and it is hypothesized that it leads to the suggestion that nanophase short-range-order (amorphous) phases of the silicates and iron oxides abound in the soil.

Banin, Amos↗
NASA NTRS1992

Effect of DCB extraction on Mossbauer and spectral data for a Hawaiian palagonitic soil (PN-9): Iden tification of pigmentary phases

The study of palagonitic soils is an active area of research in martian geoscience because the spectral and magnetic properties of a subset are spectral and/or magnetic analogues of martian bright regions. An understanding of the composition, distribution, and mineralogy of ferric-bearing phases for palagonitic soils forms, through spectral and magnetic data, a basis for inferring the nature of ferric-bearing phases on Mars. Progress has been made in this area, but the data set is incomplete, especially with respect to the nature of pigmenting phases. The purpose of this study is to identify the nature of the pigment for Hawaiian palagonitic soil PN-9 by using extraction procedures to selectively remove iron oxide phases. This soil was collected at the same locale as samples Hawaii 34 and VOL02. All three soils are good spectral analogues for martian bright regions.

Morris, Richard V.↗
NASA NTRS1992

Reflectance spectroscopy and GEX simulation of palagonite and iron-rich montmorillonite clay mixtures: Implications for the surface composition of Mars

Because of the power of remote sensing reflectance spectroscopy in determining mineralogy, it has been used as the major method of identifying a possible mineral analogue of the martian surface. A summary of proposed martian surface compositions from reflectance spectroscopy before 1979 was presented by Singer et al. Since that time, iron-rich montmorillonite clay, nanocrystalline or nanophase hematite, and palagonite have been suggested as Mars soil analogue materials. Palagonite in petrological terms is best described as an amorphous, hydrated, ferric iron, silica gel. Montmorillonite is a member of the smectite clay group, and its structure is characterized by an octahedral sheet in coordination with two tetrahedral sheets in which oxygen atoms are shared. The crystal unity of montmorillonite is well defined in contrast to palagonite where it is considered amorphous or poorly crystalline at best. Because of the absence of the diagnostic strong 2.2-micron reflectance band characteristic of clays in the near-infrared (NIR) spectrum of Mars and palagonite and based upon a consideration of wide wavelength coverage (0.3-50 microns), Roush et al. concluded that palagonite is a more likely Mars surface analogue. In spite of the spectral agreement of palagonite and the Mars reflectance spectrum in the 2.2-micron region, palagonite shows poor correspondence with the results of the Viking LR experiment. In contrast, iron-rich montmorillonite clays show relatively good agreement with the results of the Viking LR experiment. This spectral study was undertaken to evaluate the spectral properties of mixtures of palagonite and Mars analogue iron-rich montmorillonite clay (16-18 wt. percent Fe as Fe2O3) as a Mars surface mineralogical model. Mixtures of minerals as Mars surface analogue materials have been studied before, but the mixtures were restricted to crystalline clays and iron oxides.

Orenberg, J. B.↗