SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
The sheet explosive loading technique (SELT) was employed to obtain elastic-plastic, large-deflection transient and/or permanent strain data on simple well-defined structural specimens and materials: initially-flat 6061-T651 aluminum beams with both ends ideally clamped via integral construction. The SELT loading technique was chosen since it is both convenient and provides forcing function information of small uncertainty. These data will be useful for evaluating pertinent structural response prediction methods. A second objective was to obtain high-quality transient-strain data for a well-defined structural/material model subjected to impact by a rigid body of known mass, impact velocity, and geometry; large-deflection, elastic-plastic transient response conditions are of primary interest. The beam with both ends clamped and a steel sphere as the impacting body were chosen. The steel sphere was launched vertically by explosive propulsion to achieve various desired impact velocities. The sphere/beam impact tests resulted in producing a wide range of structural responses and permanent deformations, including rupture of the beam from excessive structural response in two cases. The transient and permanent strain data as well as the permanent deflection data obtained are of high quality and should be useful for checking and evaluating methods for predicting the responses of simple 2-d structures to fragment (sphere) impact. Transient strain data very close to the point of impact were not obtained over as long a time as desirable because the gage(s) in that region became detached during the transient response.
The spectrum, directivity and state of polarization is presented of the bremsstrahlung radiation expected from a beam of high energy electrons spiraling along radial magnetic field lines toward the photosphere. The results are used for calculation of the characteristics of the reflected plus direct flux.
A Monte Carlo method is described for evaluation of the spectrum, directivity and polarization of X-rays diffusely reflected from stellar photospheres. the accuracy of the technique is evaluated through comparison with analytic results. Using the characteristics of the incident X-rays of the model for solar X-ray flares, the spectrum, directivity and polarization of the reflected and the total X-ray fluxes are evaluated. The results are compared with observations.
The paper presents the spectrum, directivity, and state of polarization of the bremsstrahlung radiation expected from a beam of high-energy electrons spiraling along radial magnetic field lines toward the photosphere. A Monte Carlo method is then described for evaluation of the spectrum, directivity, and polarization of X-rays diffusely reflected from stellar photospheres. The accuracy of the technique is evaluated through comparison with analytic results. The calculated characteristics of the incident X-rays are used to evaluate the spectrum, directivity, and polarization of the reflected and total X-ray fluxes. The results are compared with observations.
The sheet explosive loading technique (SELT) was employed to obtain elastic-plastic, large deflection 3-d transient and/or permanent strain data on simple well defined structural specimens and materials: initially-flat 6061-T651 aluminum panels with all four sides ideally clamped via integral construction. The SELT loading technique was chosen since it is both convenient and provides "forcing function information" of small uncertainty. These data will be useful for evaluating pertinent 3-d structural response prediction methods.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Practices are outlined for the design, installation, checkout, calibration, and operation of a thrust measurement system to be used during tests of a liquid monopropellant rocket engine. Appendixes include: (1) thrust measurement system elemental uncertainties; (2) short- and long-term thrust measurement system uncertainty; and (3) shunt calibration of force transducers.
C IV 1548-A line profiles obtained with the University of Colorado spectrometer aboard OSO 8 reveal transient, redshifted brightenings in the chromosphere-corona transition region above active regions and sunspots. In these events the intensity rises by factors of up to 5 in less than the profile sampling interval of 27 sec. These events indicate that the emitting material is moving downward at velocities of up to 30 km/sec. The increase in line intensity and the amount of motion are consistent with the interpretation of these events as pressure waves propagating down magnetic flux loops.
Theoretical and numerical analyses were made of planar, cylindrical and spherical electrode time-of-flight mass spectrometers in order to optimize their operating conditions. A numerical analysis of potential barrier gating in time-of-flight spectrometers was also made. The results were used in the design of several small mass spectrometers. These were constructed and tested in a laboratory space simulator. Detailed experimental studies of a miniature cylindrical electrode time of flight mass spectrometer and of a miniature hemispherical electrode time of flight mass spectrometer were made. The extremely high sensitivity of these instruments and their ability to operate at D region pressures with an open source make them ideal instruments for D region ion composition measurements.
Time sequences of profiles of the 1548 A line of C IV containing 51 EUV bursts observed in or near active regions are analyzed to determine the brightness, Doppler shift and line broadening characteristics of the bursts. The bursts have mean lifetimes of approximately 150 s, and mean increases in brightness at burst maximum of four-fold as observed with a field of view of 2 x 20 arc sec. Mean burst diameters are estimated to be 3 arc sec, or smaller. All but three of the bursts show Doppler shifts with velocities sometimes exceeding 75 km/s; 31 are dominated by red shifts and 17 are dominated by blue shifts. Approximately half of the latter group have red-shifted precursors. The bursts are interpreted as prominence material, such as surges and coronal rain, moving through the field of view of the spectrometer.
Two computer programs are described for predicting the transient large deflection elastic viscoplastic responses of thin single layer, initially flat unstiffened or integrally stiffened, Kirchhoff-Lov ductile metal panels. The PLATE 1 program pertains to structural responses produced by prescribed externally applied transient loading or prescribed initial velocity distributions. The collision imparted velocity method PLATE 1 program concerns structural responses produced by impact of an idealized nondeformable fragment. Finite elements are used to represent the structure in both programs. Strain hardening and strain rate effects of initially isotropic material are considered.
Variation of the microwave intensity and spectrum due to gyro-synchrotron radiation from semi-relativistic particles injected at the top of a closed magnetic loop is described. Using the recent high spatial resolution X-ray observations from the HXIS experiment of Solar Maximum Mission and from observations by the Very Large Array (VLA), it is shown that the high microwave brightness observed at the top of the flare loop can come about if (1) the magnetic field from top to footpoints of the loop does not increase very rapidly, and (2) the accelerated particles injected in the loop have a nearly isotropic pitch angle distribution. The limits on the rate of increase of the magnetic field and/or the average pitch angle depend on the geometry and location of the loop on the solar disk.
Nonthermal radio emissions from the Saturn system were first detected by the Voyager planetary radio astronomy (PRA) experiment on board Voyager 1 in January 1980. Since then emission between 100 kHz and 1 MHz from the planet, termed Saturn kilometric radiation (SKR), has been received almost continuously. A description is presented of eight characteristics which have been fairly well defined by the Voyager 1 encounter. These include a very flat broadband frequency spectrum, a period of approximately 10 h 10 min, a change in the envelope shape of episodes between pre and postencounter, an intensity population structure typical of plural populations, and an episodic structure of a width of approximately 180 deg. It was found that postencounter episodes continue for about three times as long as preencounter ones, and that postencounter bursts are left-circularly polarized at high frequencies. At least one episode shows the onset of high frequency events some time before that of lower frequency ones.
The considered investigation is concerned with a study of the process of localized plasma entry on the basis of first principles. Since the magnetopause often moves at high velocities, an induction electric field must be involved. Attention is given to the case in which the adjacent magnetopause is at rest. Occasionally, a frame moving with the magnetopause in the interaction region is also considered. The employed model is based on the observations provided by ISEE. The considered plasma irregularity, which is denominated a 'cloud', may not have to be a large enhancement in number density or velocity. An examination of the involved physical relations shows that the plasma will create its own electric field, via a polarization current, to make possible a penetration through the magnetopause by the cloud. At the magnetopause the polarization current creates a charge separation electric field which promotes (rather than inhibits) continued flow through the moving magnetopause.
Variation of the microwave intensity and spectrum due to synchrotron radiation from semirelativistic particles injected at the top of a closed magnetic loop has been described. Using the recent high spatial resolution X-ray observations from the HXIS experiment of the SMM and observations by the VLA, it is shown that the high microwave brightness observed at the top of the flare loop can come about if (1) the magnetic field from top to footpoints of the loop does not increase very rapidly, and (2) the accelerated particles injected in the loop have a nearly isotropic pitch angle distribution. The limits on the rate of increase of the magnetic field or the average pitch angle depend on the geometry and location of the loop on the solar disk.
One of the basic problems concerning the physics of solar flares is related to the process which is responsible for the acceleration of both electrons and ions. It has been proposed that the acceleration process proceeds in two different phases. The first phase results in the acceleration of electrons to energies in the range from 10 to 100 KeV. Electrons and ions with energies exceeding 30 MeV are finally produced during the second phase. Attention is given to the observational evidence which shows that these two phases, if in fact they are separate, must operate within seconds of each other, and that this process must be able to repeat itself producing pulses of electrons and ions approximately every 10 seconds. The observations were made with the Gamma Ray Spectrometer (GRS) on the SMM satellite during the 0312 UT flare on June 7, 1980.