Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “heat capacity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Performance and properties evolution of near-term accident tolerant fuel: Cr-doped UO 2

Chromium-doped UO 2 fuel has received significant interest due to the ability for chromium to produce pellets with large average grain size (>30 μm), which has shown to increase fission gas retention during operation. Sintering of chromium-doped UO 2 pellets was pursued with oxygen potential and sintering atmosphere controlled to tailor the final microstructure of the material. Chromium additions in this study ranged from 750 to 7800 ppm. Cr concentrations were studied pre and post sintering using Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES). Effects of chromium content on lattice parameter and microstructure were examined with X-ray diffraction (XRD) and scanning electron microscopy (SEM). Contraction of the UO 2 lattice parameter was observed, as well as enlargement of grain size with increasing chromium content up to 4900 ppm Cr 2 O 3 . In addition, SEM indicated Cr incorporation within the matrix and the formation of chromium oxide precipitates throughout the microstructure at high Cr concentrations. Evaluation of thermophysical properties of Cr-doped UO 2 pellets were conducted up to 1200 °C to illustrate their evolution with increased dopant concentration and microstructural changes. The results show that grain size is maximized at 52 μm with Cr 2 O 3 concentration equal to 4900 ppm; however, grain size decreases at higher Cr 2 O 3 concentrations. No significant changes were observed in specific heat capacity, linear thermal expansion, and coefficient of thermal expansion compared to undoped UO 2 . The thermal conductivity also decreased through the incorporation of Cr 2 O 3 dopants above 750 ppm and is shown to be ~15 % lower than reported UO 2 values.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Magnetism and finite-temperature effects in UZr 2 : A density functional theory analysis

The structure and the thermophysical properties of d-UZr 2 are investigated using 0 K density functional theory and ab initio molecular dynamics (AIMD). Modeling the true paramagnetic state of this intermetallic compound has been challenging using first-principles calculations. For the first time, we find that the generalized gradient approximation method without applying an on-site Coulomb interaction term (Hubbard U) can result in a ground state that is antiferromagnetic (AFM). We believe that this weak AFM ground state is the closest to the real paramagnetic state. We found that structure optimization at finite temperatures using AIMD is necessary to achieve this ground state instead of the non-magnetic and ferromagnetic states previously reported in the literature. Our findings indicate that applying the Hubbard U on uranium f-orbitals in this metallic system is unnecessary and not recommended, as it leads to a large overestimation of the volume and introduces an unphysical strong spin polarization. Finally, our approach results in atomic volume, thermal expansion, and heat capacities that have strong agreement with experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A noncollinear density functional theory ansatz for the phononic and thermodynamic properties of α -Pu

Plutonium's phase diagram is host to complex structures and interactions that make the description of its ground state properties elusive. Using all-electron density functional theory calculations, we study the thermodynamic properties of α-Pu. To do this, we build on recent work in the literature by introducing a novel noncollinear magnetic ansatz for α-Pu's ground state. We show that the noncollinear ansatz improves the description of the experimental phonon density of states, heat capacity, and thermal expansion over previous results obtained with a collinear ansatz. Here, despite lacking a bond-equivalent picture of the bonding, these new results for α-Pu, along with recent results on δ-Pu, demonstrate the efficacy of noncollinear ansatzes for the description of plutonium.

36 MATERIALS SCIENCE↗
DOE OSTI2020

High-pressure synthesis, crystal structure, and magnetic properties of the Shastry-Sutherland-lattice oxides BaL n 2 ZnO 5 (L n = Pr, Sm, Eu)

BaPr 2 ZnO 5 , BaSm 2 ZnO 5 , and BaEu 2 ZnO 5 – a series of 4f magnetic insulators comprising the Shastry-Sutherland lattice – were synthesized via a solid-state reaction under high-pressure and high-temperature conditions. The magnetic behaviors are well characterized by the localized 4f electrons of each Ln 3+ (= Pr, Sm, Eu) under the influence of the crystal-electric field of the surrounding ions. The magnetic susceptibility and heat capacity measurements of BaPr 2 ZnO 5 (Pr 3+ ; 4f 2 3 H 4 ) indicate the splitting of the ground state J-multiplet due to the crystal-electric field. BaSm 2 ZnO 5 (Sm 3+ ; 4f 5 6 H 5/2 ) is a strong Van Vleck paramagnet, while BaEu 2 ZnO 5 is non-magnetic due to the 7 F 0 ground state (Eu 3+ ; 4f 6 7 F 0 ). The series of new oxides enriches a group of the Shastry-Sutherland lattice materials and helps to develop a range of two-dimensional quantum materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Mechanisms of stored energy release in silicon carbide materials neutron-irradiated at elevated temperatures

Understanding the stored energy release behavior of SiC is crucial for the design of SiC-based fuel cladding for light water reactors because stored energy release affects response during accident conditions. Differential scanning calorimetry was used to evaluate the stored energy of monolithic SiC and SiC fiber–reinforced SiC matrix composite variants following neutron irradiation under light water reactor–relevant dose and temperature conditions. The tests were performed at heating rates of 0.5, 3, and 20 K/min up to 1,273 K. The onset temperature of the energy release roughly corresponded to the irradiation temperature, and energy release was delayed as the heating rate increased. The monolithic and composite specimens exhibited similar stored energy release behavior up to ~1,000 K, and above that temperature, the energy release depended more on material type. The energy release measured in this study is below the material-specific heat capacity at temperatures below ~1,000 K but exceeds it under certain material and annealing conditions at temperatures above ~1,000 K. The amount of irradiation-induced volumetric swelling of the specimens was an indication of the total stored energy. Based on this observation, the energy release behavior was described by a swelling recovery model.

36 MATERIALS SCIENCE↗
DOE OSTI2025

CoRE MOF DB: A curated experimental metal-organic framework database with machine-learned properties for integrated material-process screening

Here, we present an updated version of the Computation-Ready, Experimental (CoRE) Metal-Organic Framework (MOF) database, which includes a curated set of computation-ready MOF crystal structures designed for high-throughput computational materials discovery. Data collection and curation procedures were improved from the previous version to enable more frequent updates in the future. Machine-learning-predicted properties, such as stability metrics and heat capacities, are included in the dataset to streamline screening activities. An updated version of MOFid was developed to provide detailed information on metal nodes, organic linkers, and topologies of an MOF structure. DDEC6 partial atomic charges of MOFs were assigned based on a machine-learning model. Gibbs ensemble Monte Carlo simulations were used to classify the hydrophobicity of MOFs. The finalized dataset was subsequently used to perform integrated material-process screening for various carbon-capture conditions using high-fidelity temperature-swing adsorption (TSA) simulations. Our workflow identified multiple MOF candidates that are predicted to outperform CALF-20 for these applications.

CoRE MOF database↗
DOE OSTI2026

Temporal and spatial separations between spin glass and short-range order

Broken-symmetry-induced order parameters account for many phenomena in physics. For spin glasses, this framework dictates the theoretical construction, whereas experiments have only established dynamical behaviors but not the physical entity. Experimental techniques have limitations when the spin glass is probed as an isolated state. Here, we create an evolution from a long-range order using well-controlled non-magnetic substitution on a sublattice. Neutron magnetic diffuse scattering of pico-second timescale reveals that the dynamics of short- and long-range order formation are not affected by disorder, but their spatial ranges are. Across all specimens, the inflection point of spin correlation length’s temperature dependence fully matches with the peak in heat capacity, while spin glass can freeze at millisecond timescale either above or below this characteristic temperature of spin-order formation. Our results identify the spin glass as single, uncorrelated spins at domain walls between spin clusters, and an uncorrelated coexistence of the two.

Dronova, Margarita G [Okinawa Institute of Science↗
DOE OSTI2022

Thermodynamic assessment of lithium halide reciprocal salt systems for energy applications

Lithium halides are of interest because of their unique applications as fuel or coolants in molten salt reactors (MSRs) and electrolytes in thermally activated batteries. Because iodine is an important fission product for MSRs, the Molten Salt Thermal Properties Database-Thermochemical (MSTDB-TC) is being expanded to include relevant iodide reciprocal salt systems. In this work, we assess the thermochemical properties of lithium halide pseudobinary systems based on reported experimental phase diagrams, eutectic temperatures, and enthalpies of mixing. Within the framework of the modified quasi-chemical model in the quadruplet approximation (MQMQA), extrapolations to the related pseudoternary and pseudoquaternary systems have been performed. The pseudoquaternary representations of phase equilibria, enthalpy, entropy, and heat capacity are represented in the resultant models. Of interest for generating source terms for accident analysis is the ability to compute the vapor pressures of the dominant iodide species for the systems at any composition. Here, an example of such calculations is provided for the LiF-LiI system at x LiI = 0.01 and x LiI = 0.70, in this case indicating that the LiI vapor species are predominant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Thermophysical properties of FLiBe using moment tensor potentials

Fluoride salts are prospective materials for applications in some next-generation nuclear reactors and their thermophysical properties at various conditions are of interest. Experimental measurement of the properties of these salts is often difficult and, in some cases, unfeasible due to challenges from high temperatures, impurity control, and corrosivity. Therefore, accurate theoretical methods are needed for fluoride salt property prediction. In this work, we used moment tensor potentials (MTP) to approximate the potential energy surface of eutectic FLiBe (66.6% LiF – 33.3% BeF2) predicted by the ab initio (DFT-D3) method. Here, we then used the developed potential and molecular dynamics to obtain several thermophysical properties of FLiBe, including radial distribution functions, density, self-diffusion coefficients, thermal expansion, specific heat capacity, bulk modulus, viscosity, and thermal conductivity. Our results show that the MTP potential approximates the potential energy surface accurately and the overall approach yields very good agreement with experimental values. The converged fitting can be obtained with less than 600 configurations generated from DFT calculations, which data can be generated in just 1200 core hours on today's typical processors. The MTP potential is faster than many machine learning potentials and about one order of magnitude slower than widely used empirical molten salt potentials such as Tosi/Fumi.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Predicting thermophysical properties of molten salts in the MgCl 2 -NaCl-KCl-LiCl system with a shell-model potential

Ternary eutectic salts composed of MgCl 2 , NaCl, and KCl, referred to as MNK salts, have recently emerged as promising candidates as high-temperature heat transfer fluids and thermal energy storage media. Here we performed classical molecular dynamics (MD) simulations to predict the densities, specific heat capacities, viscosities, and ionic self-diffusivities for MNK salts over a wide temperature range. The impact of LiCl additive on their thermophysical properties was also investigated. To capture the electronic polarization of Cl anions by neighboring cations, we developed a novel shell-model potential using the force-matching method and a dataset of ab initio calculated interatomic forces. Our extensive MD simulations predict structure and properties for pure salts and binary/ternary salt mixtures in the MgCl 2 -NaCl-KCl-LiCl system in overall good agreement with available experimental and theoretical data, which corroborates the accuracy and reliability of our developed potential.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Density functional thermodynamic description of spin, phonon and displacement degrees of freedom in antiferromagnetic-to-paramagnetic phase transition in YNiO 3

This work herein demonstrates a direct density functional description of the finite-temperature thermodynamic properties of solids exhibiting phase transitions through positional and spin symmetry breaking degrees of freedom. A classic example addressed here is the rare-earth (R) nickelates RNiO 3 where the ground state is characterized by crystallographic and magnetic (e.g., antiferromagnetic) long-range order (LRO), whereas the higher temperature paramagnetic phase manifests a range of local spin and positional symmetry breaking motifs with short-range order (SRO). Unlike time-dependent simulations of spin and positional degrees of freedom, in the present work, phases are described via a superposition of static configurations constructed by populating a periodic base lattice supercell allowing for the formation of energy lowing distribution of positional and spin local motifs. The thermal populations of the configurations in such a superposition phase are obtained from the energy-minimized Density Functional Theory (DFT)-calculated partition functions at different temperatures. This approach offers flexible inclusion of different physical contributions to the free energy, such as elastic, electronic and phonon free energies, all obtained from the same underlying DFT total energy calculations of periodic structures. The thermodynamic and magnetic properties of both LRO and SRO crystallographic and spin phases, including antiferromagnetic (AFM) to paramagnetic (PM) Néel phase transition in YNiO3 are studied. Including spin and phonon contributions, we find a DFT-calculated Néel temperature to be 144 K in satisfactory agreement with the experimental value of 145 K; whereas omitting the phonon contribution, one obtains a Néel temperature of 81 K. We present phonon contributions to the DFT-calculated temperature-dependent SRO, heat capacities, and the polymorphous distribution of nonzero local magnetic moments in the PM phase. This approach thus extends to finite temperatures the symmetry-broken DFT description of both the AFM and PM phases, demonstrating that a thermodynamic superposition approach based on symmetry broken configurations evaluated by a mean-field like DFT is sufficient to obtain a consistent description of the thermal physics of the AFM, PM phases and their interconversion in 3d oxides illustrated by YNiO 3 .

36 MATERIALS SCIENCE↗
DOE OSTI2025

Material properties of aqueous potassium acetate solutions for use in liquid desiccant air conditioning

We present thermophysical properties of aqueous potassium acetate solutions relevant to their application as a liquid desiccant in air-conditioning systems. Liquid desiccant air conditioners could provide up to 80% energy savings compared to high-efficiency vapor compression air conditioners. However, the commonly used liquid desiccants, particularly chloride salt solutions, are highly corrosive. This precludes the use of metallic components, necessitating specialized plastics and thereby driving up cost, weight, and limiting operational temperature and pressure ranges. Potassium acetate has been identified as a less corrosive alternative, potentially enabling broader material compatibility in LDAC components. In this study we systematically measured and modelled key thermophysical properties of KAc solutions density, vapor pressure, viscosity, specific heat capacity, phase behavior, and diffusion coefficient across a range of concentrations (10 - 70wt%) and temperatures. For instance, KAc exhibits a vapor pressure of 3.1 kPa at 50wt% and 40degrees C, demonstrating dehumidification capability comparable to chloride salts. By providing an extended dataset and associated models, this work advances the understanding needed to design energy-efficient, corrosion mitigating LDAC system.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Predicting cell-to-cell failure propagation and limits of propagation in lithium-ion cell stacks

Thermal runaway of lithium-ion batteries is a risk that is magnified when stacks of lithium-ion cells are used for large scale energy storage. When limits of propagation can be identified so that systems can be designed to prevent large scale cascading failure even if a failure does occur, these systems will be safer. This work addresses the prediction of cell-to-cell failure propagation and the propagation limits in lithium-ion cell stacks to better understand and identify safe designs. A thermal-runaway model is presented based on recent developments in thermochemical source terms. It is noted that propagating failure is characterized by temperatures above which calorimetry data is available. Results show high temperature propagating failure predictions are too rapid unless an intra-particle diffusion limit is included, introducing a Damköhler number limiter into the rate expression. This new model form is evaluated against cell-to-cell failure propagation where the end cell of a stack is forced into thermal runaway through a nail-induced short circuit. Limits of propagation for this configuration are identified. Results show cell-to-cell propagation predictions are consistent with measurements over a range of cell states of charge and with the introduction of metal plates between cells to add system heat capacity representative of structural members. This consistency extends from scenarios where propagation occurs through scenarios where propagation is prevented.

25 ENERGY STORAGE↗
DOE OSTI2021

Effect of hydrogen isotope on plasma impedance and thermal pinching induced by single aerosol droplets injected into an inductively coupled plasma

The mass of the hydrogen isotope in micrometer-sized aqueous droplets introduced into an ICP has been found to affect the degree of resulting plasma perturbation. Studied plasma perturbations include local plasma cooling, plasma shrinkage due to thermal pinching, and changes in plasma impedance. The local cooling effect caused by a vaporizing aerosol droplet was found to be similar between H 2 O and D 2 O. This finding is likely a result of the similar heat capacities and vaporization rates of H 2 O and D 2 O droplets and of the comparable thermal conductivities and dissociation kinetics of H 2 O and D 2 O vapor. In contrast, a clear isotope effect was observed for plasma shrinkage and impedance change, with H 2 O causing a considerably stronger effect. Plasma shrinkage, gauged by the reduction in Ar emission at the edge of the plasma, was detected at all observation heights within the load-coil region, with D 2 O droplets causing as much as 30% less of an effect than H 2 O. Likewise, D 2 O droplets induce significantly less change in plasma impedance than H 2 O droplets. Depending on experimental conditions and the probing method, changes in plasma impedance caused by monodisperse D 2 O droplets were only 52%–80% that of H 2 O. The lower influence on plasma shrinkage and impedance change for D 2 O droplets is believed to be related to the much lower thermal conductivity of atomic deuterium, around 70% that of atomic hydrogen (protium). The time required for the plasma impedance to return to its original steady-state value was comparatively long (~10 ms) and similar for H 2 O and D 2 O droplets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Structure-thermal property relationships of aikinite PbCuBiS 3

Understanding the structural properties and chemical bonding in complex multinary chalcogenides is highly valuable, as it provides vital information for controlling their physical properties to suit various technological applications. Here, we report on the structural, thermal, and electronic properties of PbCuBiS 3 by incorporating an experimental and theoretical investigation of this material. Analysis of the experimental temperature-dependent heat capacity and thermal conductivity data show that weak bonding and strong lattice anharmonicity give rise to ultralow thermal conductivity. Chemical bonding information obtained from the density functional theory electronic calculations reveal significant antibonding interactions that underscore the dominant role of the Cu-S tetrahedra on occupied antibonding states, as well as a highly distorted Pb/Bi-S environment inducing weak bonding and strong lattice anharmonicity. This study broadens our understanding of the structure-property relationships for this material, and can be useful for developing this and similar chalcogenide materials for potential applications of interest.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Structural and thermal properties and the origin of the ultralow thermal conductivity in the defect stannite CuIn 2 Se 4

Phase-pure CuIn 2 Se 4 , a ternary metal chalcogenide that forms in a disordered stannite crystal structure, was synthesized to investigate the structure thermal property relationships as well as reveal the origin of the ultralow thermal conductivity this material possesses over a large temperature range. Modeling of the temperature-dependent heat capacity and thermal conductivity revealed distinctive thermal properties and large lattice anharmonicity. Electron localization function calculations highlight the asymmetric bonding inherent to CuIn 2 Se 4 , which together with lattice anharmonicity directly impacts the thermal properties. Our findings reveal the specific atomic arrangement and bonding governing the thermal properties of this ternary metal chalcogenide. Our findings underscore the specific atomic arrangement and bonding governing the thermal properties in this ternary chalcogenide. This study advances the fundamental understanding of stannites, and our findings can be applied to these and other multinary metal chalcogenides of interest for applications where low thermal conductivity is desirable.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Characterization of solid particle candidates for application in thermal energy storage and concentrating solar power systems

Thermal energy storage (TES) enables concentrating solar power to remain competitive in the renewable energy mix by firming up intermittent solar resource and providing grid services such as load shifting. Free from siting constraints, stand-alone TES systems show promise as a low-cost alternative to traditional pumped-storage hydropower or compressed air energy storage. At the core of all TES technologies is a storage medium, the selection of which governs many aspects of system design and operation. Although the majority of commercial installations utilize molten salts, solid particles can demonstrate stability over wider temperature ranges. This amounts to increased energy storage densities and corresponding reductions in system cost which is essential in achieving low-cost energy storage. In this work, eight solid particle candidates are systematically identified and screened for application in a specific particle-TES system. The five most promising candidates (CARBO CP and HSP, calcined flint clay (CFC), brown fused alumina (BFA), and silica sand) are further characterized by size and morphology for fluidization suitability, flowability for particle transport, and thermal stability. Calcined flint clay and brown fused alumina are eventually down-selected due to thermal instability at the target operational temperature of 1200 °C. Although the physical characteristics of CARBO outperform silica sand in all categories examined, the marginal performance gains are considered insufficient to justify the additional media cost so silica sand is selected as the leading candidate. Within the silica sand (α-quartz) space, the high end of Geldart Group B particles is identified to satisfy the target fluidization regime for the application of interest without compromising particle flowability. Here, in focused testing, Silica 460 is shown to exhibit sufficient stability through long-duration (500-hour) thermal and cyclic testing (1200 °C), 10-hour testing at 1400 °C, and in contact with candidate refractory containment materials. Finally, an average heat capacity of 1.1 J/g∙ °C is measured over 300-1200 °C with a quartz inversion enthalpy (ΔH α-β ) of 10.7J/g.

14 SOLAR ENERGY↗
DOE OSTI2021

Unexpected Hydride: Ce 4 B 2 C 2 H 2.42 , a Stuffed Variant of the Nd 2 BC Structure Type

Ce 4 B 2 C 2 H 2.42 was grown as large crystals from a cerium/copper eutectic flux. The structure was characterized by single-crystal X-ray and neutron diffraction and was found to be a stuffed variant of Nd 2 BC with the addition of two interstitial hydrogen positions. The tetrahedral hydrogen position is fully occupied, while the octahedral position has an occupancy of 42(3)%. Initial synthesis was due to hydrogen contamination of the cerium metal but has been successfully repeated using anthracene as a carbon and hydrogen source. Density of states calculations suggest that the incorporation of hydrogen stabilizes the compound with respect to the nonhydrided model. Magnetic susceptibility data show a complex magnetic ordering at 7.7 K that originates from the localized electron on the Ce 3+ in the structure. The trivalent state is also supported by X-ray photoelectron spectroscopy measurements. Heat capacity and electrical resistivity data show that the phase transition is broad in temperature, which may be due to structural disorder. Furthermore, the large low temperature value of C/T also indicates possible heavy fermion behavior.

36 MATERIALS SCIENCE↗