Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “graphite oxidation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

The functionalization and characterization of multi-walled carbon nanotubes (MWCNTs)

Functionalization is the process of introducing chemical functional groups on the surface of the material. In this study, a multi-walled carbon nanotube (MWCNTs) was functionalized by oxidation treatment using concentrated nitric acid. The functionalized and pristine MWCNTs were analyzed by using Fourier Transform Infrared Spectroscopy (FT-IR) and X-Ray Diffraction (XRD). The XRD patterns exhibit the graphitic properties for all samples. Besides, the XRD results also demonstrate that the percent of crystallinity of MWCNTs increases as the duration of acid treatment increases. The percent of crystallinity increases from 66% to 80% when the pristine MWCNT treated for 12 hours with additional 12 hours reflux process with nitric acid. The IR spectrum for the 12 hours-treated MWCNTs shows the formation of carboxyl functional group. Additional 12 hours reflux process with nitric acid on the 12 hours-treated MWCNTs have shown the loss of existing carboxyl group and only hydroxyl group formed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

THE FIRST DISCOVERY OF PRESOLAR GRAPHITE GRAINS FROM THE HIGHLY REDUCING QINGZHEN (EH3) METEORITE

Presolar graphite grains have been extensively studied, but are limited in carbonaceous chondrites, particularly in Murchison (CM2) and Orgueil (CI1), which sampled materials from the oxidizing regions in the solar nebula. Here, we report the first discovery of presolar graphite grains from the Qingzhen (EH3) enstatite chondrite which formed under a highly reducing condition. Eighteen presolar graphite grains were identified by C-isotope mapping of the low-density fraction (1.75–1.85 g cm{sup 3}) from Qingzhen acid residue. Another 58 graphite spherules were found in different areas of the same sample mount using a scanning electron microscope and were classified into three morphologies, including cauliflower, onion, and cauliflower–onion. The Raman spectra of these spherules vary from ordered, disordered, and glassy to kerogen-like, suggestive of a wide range of thermal metamorphisms. NanoSIMS analysis of the C- and Si-isotopes of these graphite spherules confirmed 23 presolar grains. The other 35 graphite spherules have no significant isotopic anomalies, but they share similar morphologies and Raman spectra with the presolar ones. Another three grains were identified during NanoSIMS analysis. Of all the 44 presolar graphite grains identified, six grains show {sup 28}Si-excesses, suggestive of supernovae origins, and four grains are {sup 12}C- and {sup 29,30}Si-rich, consistent with low-metallicity asymptotic giant branch star origins. Another two graphite spherules have extremely low {sup 12}C/{sup 13}C ratios with marginal solar Si-isotopes. The morphologies, Raman spectra, and C- and Si-isotopic distributions of the presolar graphite grains from the Qingzhen enstatite chondrite are similar to those of the low-density fractions from Murchison carbonaceous chondrites. This study suggests a homogeneous distribution of presolar graphite grains in the solar nebula.

79 ASTRONOMY AND ASTROPHYSICS↗

Thermal stability relationships between PMR-15 resin and its composites

A study was conducted to investigate the relationship between the thermo-oxidative stability of PMR-15 matrix resin and the stability of graphite-fiber-reinforced composites that contain this resin as the matrix material. Three areas were investigated. The first was the effect of fiber/matrix interfacial bond strength on the isothermal aging weight loss of composites. By using type-A graphite fibers produced by Hercules, it was possible to study composites reinforced with fibers that were processed to receive different surface treatments. One of the fibers was untreated, a second fiber was treated by oxidation to enhance fiber/matrix bonding, and the third type of fiber was coated with an epoxy sizing. These treatments produced three significantly different interfacial bond strengths. The epoxy sizing on the third fiber was quickly oxidized from the bare fiber surfaces at 288, 316, and 343 C. The weight loss due to the removal of the sizing was constant at 1.5 percent. This initial weight loss was not observed in thermo-oxidative stability studies of composites. The PMR-15 matrix satisfactorily protected the reinforcemnt at all three temperatures.

Bowles, Kenneth J.↗

Report on initial development of a database of nuclear graphite characteristics based on microstructural characterization

This report outlines the current and future efforts to produce a comprehensive library of microstructures of nuclear graphite and carbon-based materials that are candidate materials for nuclear applications in the United States. This library must contain extensive characterizations of unirradiated graphite materials, a guide to some of the techniques used to characterize graphite, a compendium of characterization data of neutron-irradiated or oxidized material, and a compendium of microstructural information of carbon-based materials. These characterization efforts are being conducted at various length scales to understand these complex materials’ local structure and property relationships. Achieving this goal requires further developing or adapting advanced characterization techniques that capture graphite’s most relevant characteristics. Some of the general objectives of this project are to aid with the material selection, licensing, management, and core assessments of a graphite core by documenting the unirradiated microstructure of relevant grades or by characterizing the evolution of the microstructure under the reactor environment. Moreover, this project aims to provide additional information, guidelines for characterizing graphite, and a protocol to assess a nuclear graphite grade. This report also summarizes some of the initial results and some of the techniques commonly used to characterize nuclear graphite.

36 MATERIALS SCIENCE↗

Effect of Micro-Structural Dispersity of SiMo Ductile Iron on High Temperature Performance during Static Oxidation

High silicon and molybdenum (SiMo) ductile iron is commonly used for car exhaust systems, and its micro-structural dispersity depends on intrinsic parameters, which include alloy composition and inoculation efficiency, as well as extrinsic factors, such as casting wall thickness and molding material, which define cooling rate during solidification. Micro-structural dispersity is referred to as the degree of heterogeneity of sizes of structural constituencies within the microstructure. A variation in the micro-structural dispersity could impact the high temperature performance of SiMo ductile iron during static oxidation and transient thermo-mechanical loading conditions. In this study, static high temperature tests were performed on SiMo ductile iron solidified in a casting with varying wall thicknesses from 5 mm to 100 mm. The faster solidified specimens (taken from near chilled casting surfaces) had extremely high micro-structural dispersity as compared to the thicker section samples. After thermal exposure, each of the samples were characterized using 2D sections and 3D µCT images, and the results indicated an order of magnitude difference in graphite phase dispersity. The surface degradation was quantified after static oxidation experiments were implemented at temperature intervals between 650 °C and 800 °C. Non-destructive µCT 3D analysis and SEM/EDS were performed on cross sections and used to quantify the scale topology and structure. Carbon analysis was used to decouple the scale formation and decarburization phenomena that occurred within the samples. These methods enabled the quantification of the oxidation of the SiMo cast iron with different micro-structural dispersity levels after being exposed to high temperature static oxidation. Additionally, the complex material behavior during oxidation-assisted transient thermo-mechanical loading will be presented in a separate article.

36 MATERIALS SCIENCE↗

Reactivity of pulverized coals during combustion catalyzed by CeO{sub 2} and Fe{sub 2}O{sub 3}

Effects of CeO{sub 2} and Fe{sub 2}O{sub 3} on combustion reactivity of several fuels, including three ranks of coals, graphite and anthracite chars, were investigated using thermo-gravimetric analyzer. The results indicated that the combustion reactivity of all the samples except lignite was improved with CeO{sub 2} or Fe{sub 2}O{sub 3} addition. It was interesting to note that the ignition temperatures of anthracite were decreased by 50 C and 53 C, respectively, with CeO{sub 2} and Fe{sub 2}O{sub 3} addition and that its combustion rates were increased to 15.4%/min and 12.2%/min. Ignition temperatures of lignite with CeO{sub 2} and Fe{sub 2}O{sub 3} addition were 250 C and 226 C, and the combustion rates were 12.8% and 19.3%/min, respectively. When compared with those of lignite without catalysts, no obvious catalytic effects of the two catalysts on its combustion reactivity were revealed. The results from the combustion of the three rank pulverized coals catalyzed by CeO{sub 2} and Fe{sub 2}O{sub 3} indicated significant effects of the two catalysts on fixed carbon combustion. And it was found that the higher the fuel rank, the better the catalytic effect. The results of combustion from two kinds of anthracite chars showed obvious effects of anthracite pyrolysis catalyzed by CeO{sub 2} and Fe{sub 2}O{sub 3} on its combustion reactivity. (author)

01 COAL, LIGNITE, AND PEAT↗

Molecular Engineering to Enable High-Voltage Lithium-Ion Battery: From Propylene Carbonate to Trifluoropropylene Carbonate

Molecular engineering of electrolyte structures has led to the successful application of trifluoropropylene carbonate (TFPC), a fluorinated derivative of propylene carbonate (PC), in next-generation high-voltage high-energy lithium-ion cell. Additionally, in contrast to a PC-based electrolyte which cointercalates in the form of Li + -solvated species into the graphene layer and exfoliates a graphite anode, a TFPC-based electrolyte is highly compatible with a graphite anode at low potential. Additionally, it shows exceptional oxidation stability on the charged cathode surface owing to the presence of the -CF 3 group. An all-fluorinated electrolyte, that is, 1.0 M LiPF 6 TFPC/2,2,2-trifluoroethyl carbonate (FEMC) (1/1 volume ratio) + FEC additive, was formulated and demonstrated excellent cycling stability in a high-voltage LiNi 0.5 Mn 0.3 Co 0.2 O 2 /graphite cell cycled between 3.0 and 4.6 V.

25 ENERGY STORAGE↗

Deep Burn Develpment of Transuranic Fuel for High-Temperature Helium-Cooled Reactors - July 2010

The DB Program Quarterly Progress Report for April - June 2010, ORNL/TM/2010/140, was distributed to program participants on August 4. This report discusses the following: (1) TRU (transuranic elements) HTR (high temperature helium-cooled reactor) Fuel Modeling - (a) Thermochemical Modeling, (b) 5.3 Radiation Damage and Properties; (2) TRU HTR Fuel Qualification - (a) TRU Kernel Development, (b) Coating Development, (c) ZrC Properties and Handbook; and (3) HTR Fuel Recycle - (a) Recycle Processes, (b) Graphite Recycle, (c) Pyrochemical Reprocessing - METROX (metal recovery from oxide fuel) Process Development.

Snead, Lance Lewis↗

A study of graphite ablation in combined convective and radiative heating.

Comparison of graphite ablation experiment results in the diffusion-controlled oxidation and sublimation regimes with results of an equilibrium chemistry, film coefficient ablation analysis. Mass transfer and energy transfer effects are considered. Tests were conducted in an arcjet facility at convective heating rates of 600 to 800 W/sq cm, radiative heating rates up to 2900 W/sq cm, with test specimen surface pressures of 0.06, 0.1, and 0.3 atm in an air stream. The experimental and analytical mass loss and surface temperature results agreed well when the carbon vapor thermodynamic properties from the JANAF tables are used in the analysis.

Wakefield, R. M.↗

Methods for producing metal carbide materials

Methods of producing silicon carbide, and other metal carbide materials. The method comprises reacting a carbon material (e.g., fibers, or nanoparticles, such as powder, platelet, foam, nanofiber, nanorod, nanotube, whisker, graphene (e.g., graphite), fullerene, or hydrocarbon) and a metal or metal oxide source material (e.g., in gaseous form) in a reaction chamber at an elevated temperature ranging up to approximately 2400° C. or more, depending on the particular metal or metal oxide, and the desired metal carbide being produced. A partial pressure of oxygen in the reaction chamber is maintained at less than approximately 1.01×102 Pascal, and overall pressure is maintained at approximately 1 atm.

Garnier, John E.↗

Roles of mineral matter in the early stages of coal combustion

In a recent study, we discovered that oxygen from the gas phase, organic portions of the coal, and minerals in the coal have profound influence on the formation and desorption of stable surface oxides in the early stages of coal combustion. In an attempt to isolate the effects of minerals, demineralized coals (DMC) are oxidized in O{sub 2} with a contact time less than 1 s, and the amount and strength of stable surface oxides are characterized by temperature-programmed desorption (TPD) up to 1650{sup o}C. Young chars derived from both demineralized lignite and bituminous coals show low and flat TPD profiles over a wide temperature range, signifying the minerals' catalytic activities in forming stable surface oxides for both coals. Indeed, the oxidation rates of chars from both bituminous coals and lignite, estimated based on the O{sub 2} concentrations entering and exiting the Al{sub 2}O{sub 3} reactor, were higher than their DMC counterparts. Moreover, graphite, containing no minerals and organically bound oxygen, has an even lower oxidation rate. Similar to those for the raw coals, the combined oxygen balance and elemental analysis of chars from DMC suggests that the oxygen in the organic portion of the lignite activates oxygen turnover and carbon oxidation during its combustion; neither chars from raw nor demineralized bituminous coals possess these properties. X-ray photoelectron spectroscopy (XPS) of raw and demineralized bituminous coals and their char show peaks at around 532.0 eV in the O(1s) difference spectrum, suggesting the possible existence of intercalated stable surface oxides. 35 refs., 7 figs., 4 tabs.

01 COAL, LIGNITE, AND PEAT↗

Synthesis of Bismuth Functionalized Grapheme Oxide for Radioactive Iodine Gas Removal - 16114

Released radioactive iodine from nuclear reactors and nuclear severe accidents, such as those experienced at Chernobyl and Fukushima, is one of the most hazardous materials and can affect human health. Uptake of radioactive iodine from gaseous and aqueous waste, consisting of mainly organic forms such as methyl iodide and elemental iodine after reacting with organic matter in scrubber process, is a recent concern during nuclear power plant operation. In general, Triethylenediamine (TEDA) or KI-impregnated activated carbons, silver-loaded silica aerogels, and silver-loaded zeolite are used to remove radioactive iodine compounds. However, previous research has shown TEDA and KI-impregnated activated carbons to have some limitations for use in responding to severe accidents or in pressurized-water reactors, because they are easily burned up and the iodine removal efficiency of silver-loaded sorbents is greatly decreased at high temperatures. To improve the capability of synthesized sorbent material used in iodine gas removal, highly efficient sorbents for methyl and elemental iodine removal were prepared through the functionalization of graphene oxide (GO) with bismuth. GO was synthesized from natural graphite powder (99.95%) by the modified Hummers method, and then mixed with Bi(NO{sub 3}){sub 3}.5H{sub 2}O. After developing a sorbent for the removal of iodine, the synthesized sorbent was characterized using x-ray diffraction, a scanning electron microscope/energy dispersive spectrometer, and thermogravimetric analysis/differential scanning calorimetry, and the surface area of sorbents was determined using the BET-N{sub 2} adsorption method. Methyl iodine batch experiments were conducted for 7 days and elemental iodine gas adsorption experiments were conducted at high temperature (190 deg. C) using a carrier gas (air). The final concentration of iodine in batch and off-gas scrubber solutions (0.1 M NaOH) was analyzed using inductively coupled plasma mass spectrometry. The breakthrough curve and decontamination factor values were also investigated using bismuth-functionalized GO and the results were compared with Ag-zeolite, Sn-apatite, and activated carbon. (authors)

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Validations of CFD Code for Density-Gradient Driven Air Ingress Stratified Flow

Air ingress into a very high temperature gas-cooled reactor (VHTR) is an important phenomena to consider because the air oxidizes the reactor core and lower plenum where the graphite structure supports the core region in the gas turbine modular helium reactor (GTMHR) design, thus jeopardizing the reactor’s safety. Validating the computational fluid dynamics (CFD) code used to analyze the air ingress phenomena is therefore an essential part of the safety analysis and the ultimate computation required for licensing

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Role of carbon order in structural transformations and hydrogen evolution induced by reactive ball milling in cyclohexene

Demineralized Summit (DS) anthracite, DS annealed at 1673 K, and graphite are used to explore the effect of precursor order on structural transformations and H{sub 2} evolution that result during reactive ball milling. Carbon structure was assessed before and after milling with temperature-programmed oxidation, X-ray diffraction (XRD), ultraviolet Raman spectroscopy, N{sub 2} adsorption, He density, and solvent swelling. Graphite milled in cyclohexene is primarily nanocrystalline graphite, with 8 wt % amorphous content leading to low-temperature oxidation, swelling, increased surface area, and mesoporosity. Milling the disordered DS leads to signs of increased sp{sup 2} clustering, increased cross-linking, a significant ultramicroporosity with pores less than 8 angstrom, and low-temperature H{sub 2} evolution. The carbon fraction of annealed DS behaves similarly to graphite in the mill.

01 COAL, LIGNITE, AND PEAT↗

Electrodes with silicon oxide active materials for lithium ion cells achieving high capacity, high energy density and long cycle life performance

Improved negative electrodes can comprise a silicon based active material blended with graphite to provide more stable cycling at high energy densities. In some embodiments, the negative electrodes comprise a blend of polyimide binder mixed with a more elastic polymer binder with a nanoscale carbon conductive additive. The silicon-based blended graphite negative electrodes can be matched with positive electrodes comprising nickel rich lithium nickel manganese cobalt oxides to form high energy density cells with good cycling properties.

Venkatachalam, Subramanian↗

Electrodes with silicon oxide active materials for lithium ion cells achieving high capacity, high energy density and long cycle life performance

Improved negative electrodes can comprise a silicon based active material blended with graphite to provide more stable cycling at high energy densities. In some embodiments, the negative electrodes comprise a blend of polyimide binder mixed with a more elastic polymer binder with a nanoscale carbon conductive additive. The silicon-based blended graphite negative electrodes can be matched with positive electrodes comprising nickel rich lithium nickel manganese cobalt oxides to form high energy density cells with good cycling properties.

Venkatachalam, Subramanian↗

Uncatalysed and catalysed soot combustion under NO{sub x} + O{sub 2}: Real diesel versus model soots

In this work, the uncatalysed and catalysed combustion of two commercial carbon blacks and three diesel soot samples were analysed and related to the physico-chemical properties of these carbon materials. Model soot samples are less reactive than real soot samples, which can be attributed, mainly, to a lower proportion in heteroatoms and a higher graphitic order for the case of one of the carbon blacks. Among the diesel soot samples tested, the most relevant differences are the volatile matter/fixed carbon contents, which are directly related to the engine operating conditions (idle or loaded) and to the use of an oxidation catalyst or not in the exhaust. The soot collected after an oxidation catalyst (A-soot) is more reactive than the counterpart virgin soot obtained under the same engine operating modes but before the oxidation catalyst. The reactivity of the different soot samples follows the same trend under uncatalysed and catalysed combustion, the combustion profiles being always shifted towards lower temperatures for the catalysed reactions. The differences between the soot samples become less relevant in the presence of a catalyst. The ceria-zirconia catalysts tested are very effective not only to oxidise soot but also to combust the soluble organic fraction emitted at low temperatures. The most reactive soot (A-soot) exhibits a T{sub 50%} parameter of 450 C when using the most active catalyst. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗