Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fuel cell modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Significant improvement of conversion efficiency by passivation of low-angle grain boundaries in flexible low-cost single-crystal-like GaAs thin-film solar cells directly deposited on metal tape

We develop an easily implementable yet effective process to achieve high power conversion efficiency in newly-developed flexible single-crystal-like GaAs thin-film photovoltaic solar cells on cheap metal tape. We study various techniques on the fabricated devices to passivate the defect states associated with dangling bonds at low-angle grain boundaries (LA-GBs) existing in the single-crystal-like GaAs material. We report that sulfur by trioctylphosphine sulfide (TOP:S) solution treatment can partially but effectively passivate the defect states at the LA-GBs to increase all the solar cell performance parameters of open-circuit voltage VOC (33.2%), short-circuit current JSC (19.5%), and fill factor FF (25.8%), resulting in the improvement of the power conversion efficiency more than double. The material and device characterizations and numerical modeling are performed to propose a mechanism, also suggesting that the power conversion efficiency higher than 20%, which is an important target milestone in emerging solar cell technologies, can be achieved. This work presents the first effective passivation of the bulk defects in GaAs at the device level and can also offer a solution for other photonic and electronic devices using non-single-crystalline GaAs films for flexible electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Self-assembly of co-continuous nanostructured copolymer templates with compositional and architectural dispersity

In our previous DOE-supported project (DE-SC0016208), we demonstrated that a particular architecture dubbed ‘randomly end-linked copolymer networks’ (RECNs) led to especially robust self-assembly of disordered cocontinuous nanostructures. Such structures, wherein both microphases are fully percolating in three dimensions, are attractive for a wide-variety of energy-relevant applications including purification membranes, separators in batteries and fuel cells, catalyst supports, and high surface area electrodes. In the current project we sought to substantially extend our fundamental understanding of how different types of randomness in blocky copolymer architecture contribute to the robust formation of disordered cocontinuous nanostructures. To do so, we filled in the sizable gap between the previously studied cases of randomly linked linear multiblock copolymers and RECNs by studying two intermediate cases: (i) random miktoarm star polymers, which contain dispersity in the number of the two chemically-incompatible strands located at each junction and therefore the preferred interfacial curvature of each polymer, and (ii) randomly branched copolymers, which also possess bridging strands that stretch across domains and apply local ‘elastic’ forces to the interfaces. In addition, we studied a different network architecture, statistically crosslinked copolymer networks, that is more straightforward to prepare using chain growth polymerization methods, enabling more facile formation of cocontinuous nanostructures. Finally, we extended our approaches from model systems based on polystyrene and poly(lactic acid) to copolymer architectures containing either (i) polysulfone, an engineering polymer that provides excellent mechanical properties for membrane applications, or (ii) polyacrylonitrile, providing a convenient route to nanoporous carbon materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Tuning Surface Acidity of Mixed Conducting Electrodes: Recovery of Si‐Induced Degradation of Oxygen Exchange Rate and Area Specific Resistance

Abstract Metal oxides are an important class of functional materials, and for many applications, ranging from solid oxide fuel/electrolysis cells, oxygen permeation membranes, and oxygen storage materials to gas sensors (semiconducting and electrolytic) and catalysts, the interaction between the surface and oxygen in the gas phase is central. Ubiquitous Si‐impurities are known to impede this interaction, commonly attributed to the formation of glassy blocking layers on the surface. Here, the surface oxygen exchange coefficient ( k chem ) is examined for Pr 0.1 Ce 0.9 O 2‐δ (PCO), a model mixed ionic electronic conductor, via electrical conductivity relaxation measurements, and the area‐specific resistance (ASR) by electrochemical impedance spectroscopy. It is demonstrated that even low silica levels, introduced by infiltration, depress k chem by a factor 4000, while the ASR increases 40‐fold and we attribute this to its acidity relative to that of PCO. The ability to fully regenerate the poisoned surface by the subsequent addition of basic Ca‐ or Li‐species is further shown. This ability to not only recover Si‐poisoned surfaces by tuning the relative surface acidity of an oxide surface, but subsequently outperform the pre‐poisoned response, promises to extend the operating life of materials and devices for which the catalytic oxygen/solid interface reaction is central.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Spatially and temporally resolved plasma parameter estimations of laser heated MagLIF relevant gas pipes at NIF

The ability to control laser pre-heat is an integral part of the inertial confinement fusion concept known as Magnetized Liner Inertial Fusion. This process is studied at the National Ignition Facility (NIF) where 4 of the 192 laser beams are propagated through a 1-cm long gas cell where they deposit >20 kJ of energy into the gaseous fuel via inverse bremsstrahlung absorption. This process ionizes the gas, producing a plasma that follows behind the laser front and expands over the radius of the cell. Emission from this plasma, as viewed by a gated x-ray detector, can be used to build spatially and temporally resolved estimations of the pre-heat plasma's density and temperature profiles. This can then be used to estimate the plasma pressure, internal energy, and radiation losses. Estimations show the evolution of the plasma in magnetized and unmagnetized gas cells filled with ambient temperature neopentane (C5H12) +1% Ar, as well as unmagnetized cryogenically cooled (32 K) deuterium +1% Ne filled targets. This analysis shows the effects of initial gas-fill density, composition, and axial magnetization on the time-dependent plasma parameters. Previously, these parameters at the NIF had not been experimentally characterized, and these estimations provided a potential new means of testing radiation magneto-hydrodynamic predictive capability models. Results in unmagnetized targets have strong agreement with simulations. However, in targets with a 19 T applied axial magnetic field, this method yields electron temperatures up to 100% hotter than those predicted by HYDRA codes.

Bremsstrahlung↗
DOE OSTI2025

Unraveling metabolism underpinning biomass composition shift in Scenedesmus obliquus under simulated outdoor conditions using 13 C-fluxomics

To render the resulting biomass more attractive and amenable for utilization as the basis for low-carbon intensity bioproducts, single-celled algae need to be biochemically and metabolically poised to assimilate and store the delivered carbon in the fastest and most efficient manner. Accelerating biochemical carbon storage, as primarily carbohydrates or lipids, is critical to achieve the high carbon capture potential that is assigned to algae. To guide strain optimization and engineering for maximizing carbon capture and storage, it is essential to elucidate the link between carbon metabolism and biomass composition. Most published metabolomics work in algae remains largely restricted to ideal and simplified environmental conditions in model organisms, thereby limiting their translation to outdoor implementation. In this work, we utilize 13 C isotopic labeling to characterize distinct intracellular metabolic fluxes before, during, and after nitrogen depletion-induced compositional shifts in Scenedesmus obliquus UTEX 393. The results indicate that a transition to carbohydrates is characterized by diverting flux to starch instead of replenishing the Calvin cycle for CO 2 fixation whereas the subsequent transition to lipids is fueled by NADPH produced by upregulating the phosphoenolpyruvate carboxylase (PEPC)–malic enzyme (ME) cycle flux. Our work highlights bottlenecks to carbohydrate- and lipid-rich biomass and can guide implementable strategies to control the fate of fixed carbon in S. obliquus.

09 BIOMASS FUELS↗
DOE OSTI2022

Heavily neodymium doped ceria as an effective barrier layer in solid oxide electrochemical cells

10 mol% gadolinium doped ceria (GDC10) is widely used as a barrier layer between oxygen electrode and electrolyte to prevent interfacial reactions. A 50 mol% neodymium doped ceria (NDC50) barrier layer has been proposed and studied in this paper. Symmetrical cells with NDC50 and GDC10 barrier layers, Nd 2 NiO 4+δ (NNO)–Ce 0.5 Nd 0.5 O 2-δ (NDC50) electrode, and YSZ electrolyte have been systematically studied using impedance spectroscopy (EIS) at various temperatures and oxygen partial pressure (pO 2 ). The NDC50 barrier layer has significantly decreased polarization resistance across a wide temperature and pO 2 range compared to the GDC10 barrier layer. The rare earth C-type structure of the NDC50 barrier layer causes barrier free migration of oxygen ions resulting in improved ionic conductivity compared to GDC10. Finally, distribution of relaxation time (DRT) modeling has been used to obtain insights into the electrode processes.

08 HYDROGEN↗
DOE OSTI2023

Dataset of theoretical multinary perovskite oxides

Perovskite oxides (ternary chemical formula ABO 3 ) are a diverse class of materials with applications including heterogeneous catalysis, solid-oxide fuel cells, thermochemical conversion, and oxygen transport membranes. However, their multicomponent (chemical formula $A_xA^{'}_{1-x}B_yB^{'}_{1-y}O_3$) chemical space is underexplored due to the immense number of possible compositions. To expand the number of computed $A_xA^{'}_{1-x}B_yB^{'}_{1-y}O_3$ compounds we report a dataset of 66,516 theoretical multinary oxides, 59,708 of which are perovskites. First, 69,407 $A_{0.5}A^{'}_{0.5}B_{0.5}B^{'}_{0.5}O_3$ compositions were generated in the a - b + a - Glazer tilting mode using the computationally-inexpensive Structure Prediction and Diagnostic Software (SPuDS) program. Next, we optimized these structures with density functional theory (DFT) using parameters compatible with the Materials Project (MP) database. Our dataset contains these optimized structures and their formation (ΔH f ) and decomposition enthalpies (ΔH d ) computed relative to MP tabulated elemental references and competing phases, respectively. This dataset can be mined, used to train machine learning models, and rapidly and systematically expanded by optimizing more SPuDS-generated $A_{0.5}A^{'}_{0.5}B_{0.5}B^{'}_{0.5}O_3$ perovskite structures using MP-compatible DFT calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Reversible Methane Electrochemical Reactors as Efficient Energy Storage for Fossil Power

The overall objective of the project was to conduct a comprehensive Research & Development (R&D) program to demonstrate the suitability and future advancement and integration of reversible methane protonic ceramic electrochemical reactors (PCERs) as an efficient Energy Storage System (ESS) with fossil fuel power plants. Fundamental process and system models are developed to conduct a preliminary conceptual study and investigate the power plant system integration requirements, performance requirements, and technical and non-technical gaps for eventual implementation at system level. Technology maturation requirements is also investigated through identifying the critical technical elements and networking with industrial technology developers and end-users.

08 HYDROGEN↗
DOE OSTI2020

Dispersion of cryogenic hydrogen through high-aspect ratio nozzles

Liquid hydrogen is increasingly being used as a delivery and storage medium for stations that provide compressed gaseous hydrogen for fuel cell electric vehicles. In efforts to provide scientific justification for separation distances for liquid hydrogen infrastructure in fire codes, the dispersion characteristics of cryogenic hydrogen jets (50–64 K) from high aspect ratio nozzles have been measured at 3 and 5 bar abs stagnation pressures. These nozzles are more characteristic of unintended leaks, which would be expected to be cracks, rather than conventional round nozzles. Spontaneous Raman scattering was used to measure the concentration and temperature field along the major and minor axes. Within the field of interrogation, the axis-switching phenomena was not observed, but rather a self-similar Gaussian-profile flow regime similar to room temperature or cryogenic hydrogen releases through round nozzles. The concentration decay rate and half-widths for the planar cryogenic jets were found to be nominally equivalent to that of round nozzle cryogenic hydrogen jets indicating a similar flammable envelope. The results from these experiments will be used to validate models for cryogenic hydrogen dispersion that will be used for simulations of alternative scenarios and quantitative risk assessment.

08 HYDROGEN↗
DOE OSTI2022

Understanding thermal and mechanical effects on lithium plating in lithium-ion batteries

Lithium plating is one of the main concerns for cell durability, as cyclable lithium and cell capacity are decreased during the process. Thermal and mechanical loads can influence cell behavior, including lithium plating driving forces, as suggested by the Arrhenius equation and the Bruggeman relation, respectively. Hence, a 1D and a 3D model are employed to study the thermal and mechanical effects on lithium plating in a lithium-ion battery with a high areal capacity (4 mAh/cm 2 ). The 1D model assumes uniform mechanical and temperature profile, while the 3D model is capable of capturing the nonuniformity of stress and temperature in the cell. Further, the effects of mechanical deformation and different temperatures on the process of lithium plating are investigated in this study. With the help of the 1D charging simulations, it is observed that lower temperatures increase the risk of lithium plating and the presence of mechanical deformations can accelerate its initiation. Furthermore, 3D charging simulations indicated that folds and boundaries of jellyrolls are more susceptible to lithium plating due to the higher stress concentration and lower temperature, respectively.

25 ENERGY STORAGE↗
DOE OSTI2023

Power Hardware-in-the-Loop Interfaces for Inverter-Based Microgrid Experiments Including Transitions: Preprint

Microgrids continue to proliferate, particularly those that rely on inverter-based resources as the microgrid's voltage and frequency leader. Hardware-in-the-loop (HIL) simulations can de-risk microgrid deployments, and therefore we need power-hardware-in-the-loop (PHIL) interfaces for grid-forming (GFM) inverters to enable simulations of seamless transitions between islanded and grid-connected operation. Such microgrid interfaces are particularly challenging to model when the inverters need to switch modes, i.e., between grid-following (GFL) and GFM as the microgrid transitions between grid-connected and islanded operation. This paper presents two PHIL interfaces for such microgrids and the preliminary experimental results: One interface is suitable for those who have access to a power amplifier that can operate as a controllable current source, and the other is for those who need a solution that uses a voltage-mode power amplifier.

battery energy storage system↗
DOE OSTI2024

Small Cells with Big Photosynthetic Productivities: Biotechnological Potential of the Picochlorum Genus

The Picochlorum genus is a distinctive eukaryotic green-algal clade that is the focus of several current biotechnological studies. It is capable of extremely rapid growth rates and has exceptional tolerances to high salinity, intense light, and elevated temperatures. Importantly, it has robust stability and high-biomass productivities in outdoor field trials in seawater. These features have propelled Picochlorum into the spotlight as a promising model for both fundamental and biotechnological research. Recently, several genetic tools, including genome editing, were developed for these algae, enabling insights into Picochlorum photophysiology and algal transformations for expanded capabilities. Here, we survey the Picochlorum genus, its genetic toolbox, recently characterized transformants, and discuss the commercial potential of Picochlorum as a salt-water photoautotrophic biocatalyst.

09 BIOMASS FUELS↗
DOE OSTI2025

Bacterial volatile organic compound specialists in the phycosphere

Abstract Labile dissolved organic carbon in the surface oceans accounts for about one-fourth of carbon produced through photosynthesis and turns over on average every 3 days, fueling one of the largest engines of microbial heterotrophic production on the planet. Volatile organic compounds are poorly constrained components of dissolved organic carbon. Here, we detected 72 m/z signals, corresponding to unique volatile organic compounds, including petroleum hydrocarbons, totaling ~18.5 nM in the culture medium of a model diatom. In five cocultures with bacteria adapted to grow with this diatom, 1–59 m/z signals were depleted. Two of the most active volatile organic compound consumers, Marinobacter and Roseibium, contained more genes encoding volatile organic compound oxidation proteins, and attached to the diatom, suggesting volatile organic compound specialism. With nanoscale secondary ion mass spectrometry and stable isotope labeling, we confirmed that Marinobacter incorporated carbon from benzene, one of the depleted m/z signals detected in the co-culture. Diatom gross carbon production increased by up to 29% in the presence of volatile organic compound consumers, indicating that volatile organic compound consumption by heterotrophic bacteria in the phycosphere—a region of rapid organic carbon oxidation that surrounds phytoplankton cells—could impact global rates of gross primary production.

Environmental Sciences & Ecology↗
DOE OSTI2023

2022 Annual Technology Baseline (ATB) Cost and Performance Data for Transportation Technologies

The 2022 Transportation Annual Technology Baseline (ATB) provides detailed cost and performance data, estimates, and assumptions for vehicle and fuel technologies in the United States. It includes current and projected estimates: time-series through 2050 for light, medium, and heavy-duty vehicle technologies; scenarios for conventional and alternative fuels. It details the assumptions used to calculate those costs, such as natural gas and electricity prices, discount rates, and vehicle miles traveled. The 2022 Transportation ATB vehicle data are specifically for cars powered by gasoline, diesel, natural gas, gasoline hybrid, plug-in hybrid, battery electric, and fuel-cell powertrains and for trucks powered by diesel, diesel hybrid, plug-in hybrid, battery electric, and fuel cell powertrains. Fuels and blendstocks include gasoline, ethanol, blendstock for oxygenate blending, diesel, diesel from biomass, natural gas, electricity, hydrogen, aviation fuel, and marine fuel. At this time, the ATB does not include other vehicles such as buses, 2- and 3-wheeled motorized vehicles, or non-road vehicles such as aircraft, vessels, locomotives, and those for industry and agriculture. See "ATB Transportation Website" resource below for more project information.

2022↗
DOE OSTI2020

Mechanical Regulation of Photosynthesis in Cyanobacteria

Photosynthetic organisms regulate their responses to many diverse stimuli in an effort to balance light harvesting with utilizable light energy for carbon fixation and growth (source–sink regulation). This balance is critical to prevent the formation of reactive oxygen species that can lead to cell death. However, investigating the molecular mechanisms that underlie the regulation of photosynthesis in cyanobacteria using ensemble-based measurements remains a challenge due to population heterogeneity. Here, to address this problem, we used long-term quantitative time-lapse fluorescence microscopy, transmission electron microscopy, mathematical modelling and genetic manipulation to visualize and analyse the growth and subcellular dynamics of individual wild-type and mutant cyanobacterial cells over multiple generations. We reveal that mechanical confinement of actively growing Synechococcus sp. PCC 7002 cells leads to the physical disassociation of phycobilisomes and energetic decoupling from the photosynthetic reaction centres. We suggest that the mechanical regulation of photosynthesis is a critical failsafe that prevents cell expansion when light and nutrients are plentiful, but when space is limiting. These results imply that cyanobacteria must convert a fraction of the available light energy into mechanical energy to overcome frictional forces in the environment, providing insight into the regulation of photosynthesis and how microorganisms navigate their physical environment.

BASIC BIOLOGICAL SCIENCES,BIOMASS FUELS↗
DOE OSTI2020

Carbon Support Microstructure Impact on High Current Density Transport Resistances in PEMFC Cathode

Cell voltages at high current densities (HCD) of an operating proton-exchange membrane fuel cell (PEMFC) cathode suffer from losses due to the local-O 2 and bulk-H + transport resistances in the catalyst layer. Particularly, the microstructure of high surface area carbon (HSC) support upon which both the platinum catalyst and ionomer are dispersed play a pivotal role in controlling the reactant transport to the active site in the catalyst layer. In this study, we perform a systematic analysis of the underlying microstructure of platinum-cobalt catalyst dispersed on various HSC supports in terms of their surface area and pore-size distribution. The carbon microstructure was found to strongly influence the PtCo nanoparticle dispersion, catalyst layer ionomer distribution and transport losses governing the performance at HCD. Catalyst layer electrochemical diagnostics carried out to quantify local-O 2 transport resistance and bulk-H + transport resistance in the cathode were found to be directly correlated to the micropore (<2 nm) and macropore (>8 nm) surface areas of the carbon support, respectively. Finally, a 1D-performance model has been developed to assimilate our understanding of the catalyst layer microstructure and transport resistances at HCD.

25 ENERGY STORAGE↗
DOE OSTI2021

The Cell Utilized Partitioning Model as a Predictive Tool for Optimizing Counter-Current Chromatography Processes

Counter-current chromatography (CCC) is capable of unique elution modes that isolate analytes using the movement of the stationary phase in addition to moving the mobile phase. These modes include elution-extrusion CCC (EECCC) and dual-mode CCC (DM CCC) that are not possible in traditional solid-liquid chromatography systems. Although EECCC and DM CCC are widely used to recover highly retained components, to our knowledge, optimizing the elution process in these modes with predictive models has not been reported. To address this gap, we developed a predictive model for CCC dubbed the Cell Utilized Partitioning (CUP) model. The CUP model accurately predicts the effluents of multicomponent separations in EECCC and DM CCC modes when compared to experimental data. Furthermore, CUP model simulations were extended to investigate the influence of operating and intrinsic parameters on the yield and productivity, and to compare the separation performances of EECCC and DM CCC in various conditions. The results demonstrate that low distribution constants, usually a KD less than 1, and a selectivity > 1.3, under specific flowrate ranges, increase both productivity and yield. From these results, generalized optimization and scaleup guidelines are proposed that can apply to research settings and to industrial processes to maximize preparative CCC performance.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗