Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “form”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

PASSIVATION LAYER STABILITY OF A METALLIC ALLOY WASTE FORM

Alloy waste form development under the Waste Forms Campaign of the DOE-NE Fuel Cycle Research & Development program includes the process development and characterization of an alloy system to incorporate metal species from the waste streams generated during nuclear fuel recycling. This report describes the tests and results from the FY10 activities to further investigate an Fe-based waste form that uses 300-series stainless steel as the base alloy in an induction furnace melt process to incorporate the waste species from a closed nuclear fuel recycle separations scheme. This report is focused on the initial activities to investigate the formation of oxyhydroxide layer(s) that would be expected to develop on the Fe-based waste form as it corrodes under aqueous repository conditions. Corrosion tests were used to evaluate the stability of the layer(s) that can act as a passivation layer against further corrosion and would affect waste form durability in a disposal environment.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Secondary Waste Form Screening Test Results—Cast Stone and Alkali Alumino-Silicate Geopolymer

PNNL is conducting screening tests on the candidate waste forms to provide a basis for comparison and to resolve the formulation and data needs identified in the literature review. This report documents the screening test results on the Cast Stone cementitious waste form and the Geopolymer waste form. Test results suggest that both the Cast Stone and Geopolymer appear to be viable waste forms for the solidification of the secondary liquid wastes to be treated in the ETF. The diffusivity for technetium from the Cast Stone monoliths was in the range of 1.2 × 10-11 to 2.3 × 10-13 cm2/s during the 63 days of testing. The diffusivity for technetium from the Geopolymer was in the range of 1.7 × 10-10 to 3.8 × 10-12 cm2/s through the 63 days of the test. These values compare with a target of 1 × 10-9 cm2/s or less. The Geopolymer continues to show some fabrication issues with the diffusivities ranging from 1.7 × 10-10 to 3.8 × 10-12 cm2/s for the better-performing batch to from 1.2 × 10-9 to 1.8 × 10-11 cm2/s for the poorer-performing batch. In the future more comprehensive and longer term performance testing will be conducted, to further evaluate whether or not these waste forms will meet the regulation and performance criteria needed to cost-effectively dispose of secondary wastes.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effects of Forming Induced Phase Transformation on Crushing Behavior of TRIP Steel

In this paper, results of finite element crash simulation are presented for a TRIP steel side rail with and without considering the phase transformation during forming operations. A homogeneous phase transformation model is adapted to model the mechanical behavior of the austenite-to-martensite phase. The forming process of TRIP steels is simulated with the implementation of the material model. The distribution and volume fraction of the martensite in TRIP steels may be greatly influenced by various factors during forming process and subsequently contribute to the behavior of the formed TRIP steels during the crushing process. The results indicate that, with the forming induced phase transformation, higher energy absorption of the side rail can be achieved. The phase transformation enhances the strength of the side rail

36 MATERIALS SCIENCE↗

Loading Path Dependence of Forming Limit Diagram of a TRIP800 Steel

In this paper, the microstructure-based finite element modeling method is used in investigating the loading path dependence of formability of transformation induced plasticity (TRIP) steels. For this purpose, the effects of different loading path on the forming limit diagrams (FLD) of TRIP steels are qualitatively examined using the representative volume element (RVE) of a commercial TRIP800 steel. First, the modeling method was introduced, where a combined isotropic/kinematic hardening rule is adopted for the constituent phases in order to rightly describe the cyclic deformation behaviors of TRIP steels during the forming process with combined loading paths which may include the unloading between the two consecutive loadings. Material parameters for the constituent phases remained the same as those in the authors’ previous study [1] except for some adjustments for the martensite phase due to the introduction of the new combined hardening rule. Based on the new material parameters and new hardening rule, the predicted deformation behaviors of the TRIP800 steel show quite similar qualitative trends to those reported in other experimental works. Pseudo-forming limit strain diagrams (Pseudo-FLD) for the TRIP800 steel were, then, obtained for various loading paths. The computational results show that, similar to other single phase materials, the TRIP800 steel shows very sensitive loading path dependence in the strain-based forming limit diagrams (strain-FLD), but does not in the stress-based forming limit diagrams (stress-FLD), and that the phase transformation does not have significant effects on the FLD for the TRIP800 steel. From the observations in this study, the current modeling methods can be used in examining the qualitative trends of FLD of TRIP steels under different loading paths/prestrains.

Forming limit diagram↗

Measurement of the Electric Form Factor of the Neutron at High Momentum Transfer

The E02-013 collaboration's precision measurement of the electric form factor of the neutron at high momentum took place in Hall A of Jefferson Laboratory [1]. Four kinematic points spread in Q2 from 1.2 to 3.5 (GeV/c)2 reach the region of momentum transfer where there is little ambiguity that the form factors are dominated by the valence quarks. The electric form factor provides important constraints on the generalized parton distributions (GPDs) of the nucleon and therefore to understand the currently unknown quark angular orbital moments. The talk presented newly obtained results for GnE including at Q2 of 2.5 (GeV/c)2. These measurements provide access to twice the range of momentum transfer for complete iso-spin decomposition of the nucleon form factors. The form factors of the u and d quarks were also presented. The measurement used a double polarization asymmetry method [2][3] with He polarized up to 55% (provided by a novel hybrid alkali optical pumping scheme utilizing a Rb & K mixture) and the highly polarized (85%) electron beam at CEBAF. A specially constructed detector package consisting of an electron spectrometer, named Big-Bite, with a solid angle of 95 msr and a large neutron detector were used to detect the particles in the reaction {sup 3}H{rvec e}({rvec e},e',h). The experimental apparatus provided more than 100 times better Figure-of-Merit than other GnE experiments utilizing polarized targets; for more information see [4].

43 PARTICLE ACCELERATORS↗

Bulk Power System Dynamics with Varying Levels of Synchronous Generators and Grid-Forming Power Inverters: Preprint

Inverters using phase-locked loops for control depend on voltages generated by synchronous machines to operate. This might be problematic if much of the conventional generation fleet is displaced by inverters. To solve this problem, grid-forming control for inverters has been proposed as being capable of autonomously regulating grid voltages and frequency. Presently, the performance of bulk power systems with massive penetrations of grid-forming inverters has not been thoroughly studied to elucidate benefits. Hence, this paper presents inverter models with two grid-forming strategies: virtual oscillator control and droop control. The two models are specifically developed to be used in positive-sequence simulation packages and have been implemented in PSLF. The implementations are used to study the performance of bulk power grids incorporating inverters with grid-forming capability. Specifically, simulations are conducted on a modified IEEE 39-bus test system and the micro-WECC test system with varying levels of synchronous and inverter-based generation. The dynamic performance of the tested systems with grid-forming inverters during contingency events is better than cases with only synchronous generation.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Fabrication and Properties of Technetium-Bearing Pyrochlores and Perovskites as Potential Waste Forms - 13222

Technetium-99 (t{sub 1/2}= 2.13x10{sup 5} years) is important from a nuclear waste perspective and is one of the most abundant, long-lived radioisotopes in used nuclear fuel (UNF). As such, it is targeted in UNF separation strategies such as UREX+, for isolation and encapsulation in solid waste forms for storage in a nuclear repository. We report here results regarding the incorporation of Tc-99 into ternary oxides of different structure types: pyrochlore (Nd{sub 2}Tc{sub 2}O{sub 7}), perovskite (SrTcO{sub 3}), and layered perovskite (Sr{sub 2}TcO{sub 4}). The goal was to determine synthesis conditions of these potential waste forms to immobilize Tc-99 as tetravalent technetium and to harvest crystallographic, thermophysical and hydrodynamic data. The objective of this research is to provide fundamental crystallographic and thermophysical data on advanced ceramic Tc-99 waste forms such as pyrochlore, perovskite, and layered perovskite in support of our current efforts on the corrosion of technetium-bearing waste forms. The ceramic Tc-99-bearing waste forms exhibit good crystallinity. The lattice parameters and crystal structures of the technetium host phases could be refined with high accuracies of ±3, ±4, and ±7 fm (10{sup -15} m), for Nd{sub 2}Tc{sub 2}O{sub 7}, SrTcO{sub 3}, and Sr{sub 2}TcO{sub 4}, respectively. The associated refinement residuals (R{sub Wp}) for the patterns are 4.1 %, 4.7 % and 6.7 %, and the refinement residuals for the individual phases (R{sub Bragg}) are 2.0 %, 2.4 % and 3.9 %, respectively. Thermophysical properties of the oxides SrTcO{sub 3}, Sr{sub 2}TcO{sub 4}, and Nd{sub 2}Tc{sub 2}O{sub 7} were analyzed using AC magnetic susceptibility measurements to further harvest information on the critical temperature (T{sub c}) for superconductivity. In our experiments the strontium technetates, SrTcO{sub 3} and Sr{sub 2}TcO{sub 4}, show superconductivity at rather high critical temperatures of T{sub c} = 7.8 K and 7 K, respectively. On the other hand Nd{sub 2}Tc{sub 2}O{sub 7} did not show any changes in magnetic properties above 3 K. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Preparation, Performance and Mechanism of Tc and I Getters in Cementitious Waste Forms - 17124

Cementitious waste forms offer a low temperature, cost effective technology for the solidification of liquid wastes. At the Department of Energy Hanford Site, 99-Tc and 129-I are radionuclides contained within low activity waste (LAW) which contribute significantly to environmental impacts associated with clean-up of the site. Cast Stone, a cementitious waste form comprised of 47 wt% blast furnace slag, 45 wt% fly ash and 8 wt% ordinary Portland cement, has undergone investigation as a possible candidate technology for the solidification of LAW. In screening tests using EPA Method 1315 leach testing of various mixes of Cast Stone with simulated LAW, Tc observed effective diffusivities (Dobs) had an average of 5.3 x 10-11 cm{sup 2}/s and I Dobs had an average of 5.7 x 10-9 cm{sup 2}/s. From these measurements, an opportunity exists to improve retention of Tc and I by Cast Stone. One approach to accomplish this is through the incorporation of Tc and I getters to selectively sequester Tc and I in the waste stream and eventual waste form. Initial testing conducted at PNNL identified potassium metal sulfide (KMS-2) and Sn(II)-apatite (Sn-A) as the strongest performing Tc getters and silver exchanged zeolite (Ag-Z) as the top performing I getter. This research also demonstrated that the Tc and I getters, when added to solution simultaneously, can have deleterious interactions with one another and lower the Tc and I removal levels. However, these interactions can be overcome through sequential treatment of solution with the getters. Cast Stone samples were fabricated using a 6.5 M Na average LAW simulant spiked with Tc and I with the addition of various combinations of Tc and I getters. Through EPA Method 1315 and Method 1313 testing it was found that the KMS-2 Tc getter was most successful at lowering Tc Dobs. The I getters were not effective, as apparent interference from sulfide components of the waste form may have led to dissociation of the AgI formed by the Ag-Z getter in sequestering the I from solution. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Evaluating the Impacts of Reactive Gas (Carbon Dioxide and Oxygen) Ingress on Leaching from Cementitious Waste Forms - 17482

Cementitious materials are currently being used as the waste forms for low-activity waste disposal (Saltstone) at the Savannah River Site. In addition, cementitious materials have been selected as the waste form (Cast Stone) for secondary wastes and are being investigated for use for supplemental low-activity waste treatment (Cast Stone) at the Hanford Site. These materials are subjected to numerous aging and degradation phenomena in the disposal environment that potentially impact their long-term durability and performance. One important phenomenon is the ingress of reactive gases (i.e., carbon dioxide and oxygen) that can react with and change the chemistry and pore structure and thus mass transport properties of the waste forms. The reaction of carbon dioxide (i.e., carbonation) reduces the pH of the waste form pore solution impacting the solubility of constituents of potential concern (COPCs). In Cast Stone and Saltstone, the reaction of oxygen (i.e., oxidation) impacts the solubility of redox-sensitive COPCs, notably the technetium-99 (Tc-99) and chromium. The objective of this research is to experimentally characterize the carbonation and oxidation impacts on chemistry and leaching behavior in cementitious waste forms using experimental techniques including United States Environmental Protection Agency (U.S. EPA) Method 1313 and U.S. EPA Method 1315. Results of experimental characterization will be used to parameterize reactive mass transport models to project leaching under a range of field scenarios in future applications. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Electromagnetic form factors of nucleons with QCD constraints: Systematic study of space- and time-like regions

Elastic electromagnetic form factors of nucleons are investigated for both the time-like and the space-like momenta by using the unsubtracted dispersion relation with QCD constraints. It is shown that the calculated form factors reproduce the experimental data reasonably well; they agree with recent experimental data for the neutron magnetic form factors for the space-like data obtained by the CLAS Collaboration and are compatible with the ratio of the electric and magnetic form factors for the time-like momentum obtained by the BABAR Collaboration.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DDT Polymorphism and the Lethality of Crystal Forms

Abstract DDT (1,1,1‐trichloro‐2,2‐bis(4‐chlorophenyl)ethane), a contact insecticide with a rich and controversial history since its activity was discovered in 1939, has long been thought to be monomorphic. Herein we report the discovery and characterization of a second polymorph, designated Form II, which can be isolated as single crystals, but converts very slowly at room temperature to the form reported previously, now designated as Form I. Computations based on an evolutionary algorithm for crystal structure prediction revealed that Forms I and II are among the four lowest energy crystal structures of fifty calculated. A preliminary study of the contact insecticidal activity toward fruit flies (Drosophila melanogaster) indicates that Form II is more active, suggesting opportunities for more effective solid‐state formulations that would allow reduced amounts of DDT, thereby minimizing environmental impact.

Yang, Jingxiang↗

DDT Polymorphism and the Lethality of Crystal Forms

DDT (1,1,1-trichloro-2,2-bis(4-chlorophenyl)ethane), a contact insecticide with a rich and controversial history since its activity was discovered in 1939, has long been thought to be monomorphic. Herein we report the discovery and characterization of a second polymorph, designated Form II, which can be isolated as single crystals, but converts very slowly at room temperature to the form reported previously, now designated as Form I. Computations based on an evolutionary algorithm for crystal structure prediction revealed that Forms I and II are among the four lowest energy crystal structures of fifty calculated. In this work, a preliminary study of the contact insecticidal activity toward fruit flies (Drosophila melanogaster) indicates that Form II is more active, suggesting opportunities for more effective solid-state formulations that would allow reduced amounts of DDT, thereby minimizing environmental impact.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and Thermal Characterization of Zolpidem Hemitartrate Hemihydrate (Form E) and Its Decomposition Products by Laboratory X-Ray Powder Diffraction

The crystal structure of zolpidem hemitartrate hemihydrate (I, Form E) has been solved from high-resolution laboratory powder diffraction data. It crystallizes in the orthorhombic P2{sub 1}2{sub 1}2{sub 1} space group with a = 22.4664(6) {angstrom}, b = 26.0420(7) {angstrom}, and c = 7.4391(1) {angstrom}. Protonation of zolpidem molecules could not be unambiguously determined. Thermal stability of Form E has been investigated by TG-DTA and in situ by temperature resolved X-ray powder diffraction. Water loss occurs between 50 C {le} t {le} 100 C while structure decomposition commences at approximately 120 C yielding zolpidem tartrate (II) and pure zolpidem base (III) in approximately equimolar amounts. Crystal structures of II and III have been solved simultaneously from a single powder pattern of thermally decomposed I. Zolpidem tartrate crystallizes in the orthorhombic P2{sub 1}2{sub 1}2{sub 1} space group with a = 19.9278(8) {angstrom}, b = 15.1345(8) {angstrom}, and c = 7.6246(2) {angstrom} (at 140 C). Zolpidem base crystallizes in the orthorhombic Pcab space group with a = 9.9296(4) {angstrom}, b = 18.4412(9) {angstrom}, and c = 18.6807(9) {angstrom} (at 140 C). In the reported crystal structures zolpidem molecules form stacks through {pi}-{pi} interaction or dipole-dipole interactions while tartrate moieties, if present, form hydrogen bonded chains. Water molecule in I forms a hydrogen bond to the imidazole nitrogen atom of the zolpidem molecule. Free space in the crystal structure of I could allow for the additional water molecules and thus a variable water content.

08 HYDROGEN↗

Impact of form factor uncertainties on interpretations of coherent elastic neutrino-nucleus scattering data

The standard model coherent elastic neutrino-nucleus scattering (CEνNS) cross section is subject to nuclear form factor uncertainties, mainly driven by the root-mean-square radius of the neutron density distribution. Motivated by COHERENT phases I-III and future multi-ton direct detection dark matter searches, we evaluate these uncertainties in cesium iodide, germanium, xenon and argon detectors. We find that the uncertainties become relevant for momentum transfers q≳20 MeV and are essentially independent of the form factor parameterization. Consequently, form factor uncertainties are not important for CEνNS induced by reactor or solar neutrinos. Taking into account these uncertainties, we then evaluate their impact on measurements of CEνNS at COHERENT, the diffuse supernova background (DSNB) neutrinos and sub-GeV atmospheric neutrinos. We also calculate the relative uncertainties in the number of COHERENT events for different nuclei as a function of recoil energy. For DSNB and atmospheric neutrinos, event rates at a liquid argon detector can be uncertain to more than 5%. Finally, we consider the impact of form factor uncertainties on searches for nonstandard neutrino interactions, sterile neutrinos and neutrino generalized interactions. We point out that studies of new physics using CEνNS data are affected by neutron form factor uncertainties, which if not properly taken into account may lead to the misidentification of new physics signals. The uncertainties quantified here are also relevant for dark matter direct detection search

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Bootstrapping a stress-tensor form factor through eight loops

We bootstrap the three-point form factor of the chiral stress-tensor multiplet in planar $\mathcal{N}$ = 4 supersymmetric Yang-Mills theory at six, seven, and eight loops, using boundary data from the form factor operator product expansion. This may represent the highest perturbative order to which multi-variate quantities in a unitary four-dimensional quantum field theory have been computed. In computing this form factor, we observe and employ new restrictions on pairs and triples of adjacent letters in the symbol. We provide details about the function space required to describe the form factor through eight loops. Plotting the results on various lines provides striking numerical evidence for a finite radius of convergence of perturbation theory. By the principle of maximal transcendentality, our results are expected to give the highest weight part of the gg → Hg and H → ggg amplitudes in the heavy-top limit of QCD through eight loops. These results were also recently used to discover a new antipodal duality between this form factor and a six-point amplitude in the same theory.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Constitutive model development of aluminum alloy 1100 for elevated temperature forming process

Commercially pure aluminum alloy, AA1100, presents good electrical and thermal conductivity, high formability, and low cost. Those favorable characteristics have the potential to enable bipolar plates with improved economics and enhanced performance compared to current stainless steel bipolar plates for proton exchange membrane fuel cells. An accurate constitutive model is essential to develop and optimize processing parameters and effectively control the forming process. Here, the objective of this work is to develop a constitutive model of AA1100 that is able to simulate stress-strain relation, formed geometry, and predict the onset of fracture strain to avoid forming failure. Initially, a set of tensile tests at temperature between 300 and 500°C and strain rate between 0.005 and 1.0/s were conducted to examine the deformation behavior. Then, a set of damage-based unified visco-plastic constitutive equations is proposed and calibrated based on the results of stress-strain data. A genetic algorithm optimization method is applied to search for best fitting material constants in constitutive equations. The proposed model shows good predictability of both the stress-strain relation and fracture strain at low strain rate and high temperature conditions. The accuracy of proposed model is also evaluated statistically. A comparison of the proposed model with three popular models (Arrhenius-type mode, Johnson-Cook model and Zerilli-Armstrong model) was made. The proposed model shows the best experimental agreement with correlation coefficient of 0.96 in contrast to 0.25, 0.38 and 0.75 for the popular models, respectively. The proposed model can help to optimize the elevated temperature forming process and guide die design to enable optimal geometric features in the formed components.

08 HYDROGEN↗

Convexity Conditions and the Legendre-Fenchel Transform for the Product of Finitely Many Positive Definite Quadratic Forms

While the product of finitely many convex functions has been investigated in the field of global optimization, some fundamental issues such as the convexity condition and the Legendre-Fenchel transform for the product function remain unresolved. Focusing on quadratic forms, this paper is aimed at addressing the question: When is the product of finitely many positive definite quadratic forms convex, and what is the Legendre-Fenchel transform for it? First, we show that the convexity of the product is determined intrinsically by the condition number of so-called 'scaled matrices' associated with quadratic forms involved. The main result claims that if the condition number of these scaled matrices are bounded above by an explicit constant (which depends only on the number of quadratic forms involved), then the product function is convex. Second, we prove that the Legendre-Fenchel transform for the product of positive definite quadratic forms can be expressed, and the computation of the transform amounts to finding the solution to a system of equations (or equally, finding a Brouwer's fixed point of a mapping) with a special structure. Thus, a broader question than the open 'Question 11' in Hiriart-Urruty (SIAM Rev. 49, 225-273, 2007) is addressed in this paper.

97 MATHEMATICS AND COMPUTING↗

Effects of Forming Pressure on Physicochemical Properties of YBCO Ceramics

This article details the solid-state synthesis of high-temperature superconducting YBa{sub 2}Cu{sub 3}O{sub 7−x}. Tests were carried out on samples formed at different pressures (200, 400, 600 and 800 MPa) before being annealed under pure oxygen. The X-ray diffraction method showed that, regardless of the forming pressure, the samples contain about 97 wt.% of Y-123 phase. SEM images showed a polycrystalline structure of samples of similar grain size and number of pores (intergranular spaces). The values of critical temperatures (T{sub c0}), determined from magnetoresistance measurements, are about 91.5 K for all samples, and the T{sub c0} temperatures do not depend on sample-forming pressure. Magnetoresistance measurements have shown that samples formed with higher pressures exhibit smaller changes in T{sub c0} and superconducting transition width ΔT due to the influence of the H{sub DC} magnetic field, than the samples formed with lower pressures. Values of specific resistance determined by the use of van der Pauw method at 300 K is about 2 mΩcm for all samples. The critical temperatures (T cintra) of grains and critical current densities at 77 K were determined from AC magnetic susceptibility measurements, and they are about 91.6 K and 400 A cm{sup −2}, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗