Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “extensions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Solar cell development for the Power Extension Package

The Power Extension Package (PEP), a 32-kilowatt, flexible-substrate, retrievable solar array system for use on the Space Shuttle, is described. It is noted that solar cell costs will be reduced by increasing cell area and simplifying cell and coverglass fabrication processes and specifications. The tests that have been carried out on the cells are described, among them a unique radiation damage test and a side-by-side comparison of candidate cell types with pre- and post-irradiation airplane calibration of outer space short-circuit current

Baraona, C. R.↗
NASA NTRS1982

The extension of OB star winds to lower luminosities

Mass loss rates for a number of early-to-mid-B main-sequence stars are compared with extrapolations of recently derived empirical correlations between M and stellar parameters for luminous OB stars. The order of magnitude of the rates for the B stars is consistent with a simple dependence on luminosity over the range from Of to mid-B, and is not consistent with previously derived correlations involving a dependence on mass or radius, which implies that luminosity is the dominant factor in driving the mass loss throughout the range of spectral types from mid-B main-sequence to Of. The winds in Be stars may represent a straightforward extension of the OB wind phenomenon to lower luminosities, and there appears to be no significant difference between B and Be stars in terms of their wind characteristics.

Snow, T. P., Jr.↗
NASA NTRS1982

Extension of the hole-drilling method to birefringent composites

A complete stress analysis and reliable failure criteria are essential for important structural applications of composites in order to fully utilize their unique properties. The inhomogeneity, anisotropy and inelasticity of many composites make the use of experimental methods indispensable. Among the experimental techniques, transmission photoelasticity has been extended to birefringent composites in recent years. The extension is not straight-forward, in view of the complex nature of the photoelastic response of such model materials. This paper very briefly reviews the important developments in the subject and then describes the theoretical basis for a new method of determining the individual values of principal stresses in composite models. The method consists in drilling very small holes at points where the state of stress has to be determined. Experiments are then described which verify the theoretical predictions. The limitations of the method are pointed out and it is concluded that valuable information concerning the state of stress in a composite model can be obtained through the suggested method.

Prabhakaran, R.↗
NASA NTRS1984

Torque-Wrench Extension Arm

Torque-wrench extension arm makes possible to apply torque to bolt, screw, or nut inaccessible to conventional wrenches or in areas where wrench cannot be manipulated. Used in narrow pockets and behind panels and walls.

Pacala, T. J.↗
NASA NTRS1982

Service evaluation of Aluminum-Brazed Titanium (ABTi) jet engine tailpipe extensions

Aluminum-brazed titanium (ABTi) jet engine tailpipe extensions were evaluated in commercial service over a 3-year period. The purpose of the evaluation was to determine the corrosion resistance of ABTi in acoustic applications (i.e., honeycomb sandwich incorporating a perforated inner skin). The results showed that ABTi does not have acceptable corrosion resistance in acoustic applications under severe operating conditions, but may be acceptable for acoustic applications in less severe environments.

Elrod, S. D.↗
NASA NTRS1982

Submillimeter extensions of the solar limb determined from observations of the total eclipse of 1981 July 31

First results are presented of observations of a lunar occultation of the solar limb made from the Kuiper Airborne Observatory in the 30 micrometr, 50 micrometer, 100 micrometer, and 200 micrometer continuum during the total solar eclipse of 1981 July 31. The solar limb was extended at the longer wavelengths up to 1000 km higher than predicted from smooth plane-parallel chromospheric models. Results at both second and third contact show the infrared limb extensions to be approximately 0".8, 1"5, 2".5 and 3".0 above the visible limb in the observed bands, respectively. A possible interpretation proposes chromospheric fine structure inhomogeneities of greater density than presently incorporated in models of the middle chromosphere.

Lindsey, C.↗
NASA NTRS1982

Extension of service life of rigid transfer lines /SMDC/

The results of a life evaluation program on rigid explosive transfer lines, which are used to initiate aircraft emergency crew escape functions, are presented in order to provide quantitative information on rigid explosive transfer lines which can contribute to responsible, conservative, service life determinations. The program involved the development of a test methodology, testing of the three types of transfer lines in use in the U.S., testing of these lines following a repeat of the thermal test conducted in the original qualification, and conducting a degradation investigation. Results from the testing of more than 800 components showed that rigid explosive transfer lines were not affected by age, service, or a repeat of the thermal qualification tests on full-service lines. The explosive degradation limits were approximated and the mechanisms examined. It is concluded that the service lives of rigid explosive transfer lines should be considered for extension in order to provide cost savings and increased system reliability.

Bement, L. J.↗
NASA NTRS1983

An extensive galactic search for conformer II glycine

The most extensive galactic search reported to date for conformer II glycine, a higher energy form of the simplest amino acid has been conducted. The search utilized four glycine transitions at centimeter wavelengths and 21 at millimeter wavelengths to observe 18 galactic molecular sources and one comet. No conformer II glycine lines were detected, and measurements of representative sources were used to compute upper limits on total column densities. Several unidentified lines were detected and are reported here with some suggested possible identifications.

Snyder, L. E.↗
NASA NTRS1983

Wing extensions for improving climb performance

Recent wind tunnel studies have shown that significant improvements in wing efficiency and climb performance can be achieved using wing extensions having sharp edges and unmodified upper airfoil contours. Based on tests of six configurations, a simple tip shape provided the best wing efficiency at high lift conditions without penalty during cruise conditions. The best configuration tested exhibited more than 20 percent improvement in the maximum rate of climb, plus a reduction in stall speed and a slight improvement in cruise performance over a baseline tip with a round edge. In addition to measurements that were used to determine performance, flow visualization studies provided insight into reasons for improved wing efficiency. Tests were conducted using a high performance general aviation aircraft model with a tapered, cantilevered wing.

Nicks, O. W.↗
NASA NTRS1983

Extensions and applications of a second-order landsurface parameterization

Extensions and applications of a second order land surface parameterization, proposed by Andreou and Eagleson are developed. Procedures for evaluating the near surface storage depth used in one cell land surface parameterizations are suggested and tested by using the model. Sensitivity analysis to the key soil parameters is performed. A case study involving comparison with an "exact" numerical model and another simplified parameterization, under very dry climatic conditions and for two different soil types, is also incorporated.

Andreou, S. A.↗
NASA NTRS1984

Bioassay, isolation and studies on the mechanism of action of neurite extension factor

The identification and purification of molecules active in promoting neurite outgrowth requires a sensitive reproducible bioassay. A quantitative bioassay was utilized to purify a neurite extension factor (NEF) based on counting the number of phase bright neurons with processes at least equal to one cell body diameter after 20 hrs. in culture is defined, serum free medium. Using a combination of heat treatment DEAE cellulose chromatography and gel filtration, an acidic protein of M sub r = 75,000 was highly purified. Upon reduction, it yields subunits of M sub r = 37,000. Purified fractions are active half maximally at 100 ng/ml in inducing neurite outgrowth in this bioassay. Currently, monoclonal antibodies to NEF are being produced. Female Balb C mice were immunized with the antigen and fusions with mouse myeloma cells will be performed to yield hybridoma cells.

Kligman, D.↗
NASA NTRS1984

An analytical design procedure for the determination of effective leading edge extensions on thick delta wings

An analytical design procedure for leading edge extensions (LEE) was developed for thick delta wings. This LEE device is designed to be mounted to a wing along the pseudo-stagnation stream surface associated with the attached flow design lift coefficient of greater than zero. The intended purpose of this device is to improve the aerodynamic performance of high subsonic and low supersonic aircraft at incidences above that of attached flow design lift coefficient, by using a vortex system emanating along the leading edges of the device. The low pressure associated with these vortices would act on the LEE upper surface and the forward facing area at the wing leading edges, providing an additional lift and effective leading edge thrust recovery. The first application of this technique was to a thick, round edged, twisted and cambered wing of approximately triangular planform having a sweep of 58 deg and aspect ratio of 2.30. The panel aerodynamics and vortex lattice method with suction analogy computer codes were employed to determine the pseudo-stagnation stream surface and an optimized LEE planform shape.

Farhad Ghaffari↗
NASA NTRS1981

Extension to an analysis of turbulent swirling compressible flow for application to axisymmetric small gas turbine ducts

An existing computer program, the Axisymmetric Diffuser Duct Code (ADD code), which calculates compressible turbulent swirling flow through axisymmetric ducts was modified to permit calculation of flows through small gas turbine ducts with struts, guide vanes and large degrees of turning. The improvements include a coordinate generator, an end-wall loss model, and a generalized geometry capability to describe struts and guide vanes in ducts which turn more than 90 degrees. An improved output format was developed to provide the solution on any arbitrary plane in the duct and an extensive literature survey of calculation procedures used in gas turbine technology was completed which suggests improvements in the computer code. Calculations are presented for the flow through the AGT101 small gas turbine inlet duct and turbine exhaust diffuser which demonstrate the ADD code modifications implemented in the investigation. The computed results compare favorably with experimental results.

Anderson, O. L.↗
NASA NTRS1984

Limitations and empirical extensions of the k-epsilon model as applied to turbulent confined swirling flows

Shortcomings and recommended corrections to the standard two-equation k-epsilon turbulence model suggested by previous investigators are presented. They are assessed regarding their applicability to turbulent swirling recirculating flow. Recent experimental data on swirling confined flows, obtained with a five-hole pitot probe and a six-orientation hot-wire probe, are used to obtain optimum values of the turbulence parameters C-mu, C2, and sigma-epsilon for swirling flows. General predictions of moderately and strongly swirling flows with these values are more accurate than predictions with the standard or previous simple extensions of the k-epsilon turbulence model.

Lilley, D. G.↗
NASA NTRS1984

Coronal extension of flaring region magnetic fields inferred from high-resolution microwave and type III burst observations

Observations of three solar radio bursts, obtained with the Very Large Array of the National Radio Astronomy Observatory at 6 cm wavelength, have been combined with meter observations from the Mark III Nancay Radioheliograph. There is a good correlation between solar activity observed at the two wavelength domains. A small change by about 10 sec in the centimetric burst location corresponds to a large change, by about 0.5 solar radius, in the related metric type III burst location. This indicates discrete injection/acceleration regions and the presence of very divergent magnetic fields. The bursts come from two distinct active regions. With two-dimensional spatial resolution, it is shown that, in this sample, each active region possesses a coronal extension that is separated from that of the neighboring active region.

Lantos, P.↗
NASA NTRS1985

Space Shuttle orbiter trimmed center-of-gravity extension study

Aerodynamic, heat transfer, and system design studies to determine removable modifications for the Space Shuttle orbiter that would extend its forward center-of-gravity triom capability are summarized. Wind-tunnel tests were conducted at Mach numbers ranging from 0.25 to 20.3 to determine the most effective aerodynamic modifications. Heat transfer and system design studies determined the impact of the modifications on the thermal protection system and structural weight of the vehicle. The most effective modifications were in-fillet canards or a forward extension of the existing forward wing fillet.

Scallion, W. I.↗
NASA NTRS1985

Approach for Service Life Extension of Explosive Devices for Aircraft Escape Systems

The service life evaluation of explosive devices used in a wide variety of aircraft escape systems is described. The purpose was to develop a service extension approach, supported by tests on candidate devices, to evaluate the effects of service, age, and degradation, and allow responsible, conservative, service life determinations. An overview is given on the recommended approach and experimental procedures for accurate service evaluations with test results on rigid and flexible explosive transfer lines, one-way transfers, and flexible linear shaped charges.

Bement, L. J.↗