Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “economically viable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Co-production of Clean and Low Cost Hydrogen and Other Commodity Chemicals (CRADA Final Report)

We worked on the production of hydrogen and sulfuric acid electrochemically. We did this by building an electrolyzer and performing techno-economic analysis for which we published a paper (documented above). We also performed many leaching reactions with acid similar to the acid that we would have produced. We found that it was not commercially viable to cogenerate hydrogen and sulfuric acid because the technical problems would take too long to solve under the constraints of venture capital.

08 HYDROGEN↗
DOE OSTI2026

Pathways to cost competitive and viable lithium production from Salton Sea geothermal brines

Lithium supply chains remain heavily concentrated in hard rock and brine resources, creating significant supply risks. Geothermal brines represent an underutilized alternative, yet commercial progress is hindered by the absence of facility-scale cost assessments. Here, we present a techno-economic analysis of large-scale lithium extraction from Salton Sea geothermal brines, drawing on primary company disclosures, process patents, and brine resource modeling. Caused by varying lithium and impurity concentrations, brine dilution over time, and process configurations (e.g., production via carbonation and conversion vs. electrolysis), we find that large-scale production costs may reach ~10,000 United States dollars per ton, but increase up to 22,000 United States dollars per ton with higher certainty of brine modeling, raising concerns about economic competitiveness to conventional low-cost sources. Finally, a project feasibility-focused scenario analyses shows that leveraging brine pre-treatment by-product sales could lower long-term lithium break-even prices by ~5,000 United States dollars per ton, whereas capital cost optimization of 20% could further reduce lithium break-even prices by 10%.

Wesselkaemper, Jannis↗
DOE OSTI2024

Analysis and Design for Sustainable Circularity of Barrier Films Used in Sheet Molding Composites Production

Sheet molding composites (SMC) are thermoset based molding compounds with a global market size of USD 2.1 billion in 2020. SMC is usually processed with multilayer barrier/carrier films to prevent emissions from volatile organic compounds (VOC). The plastic barriers are separated from SMC after the curing process and discarded. To illustrate the high consumption volume of SMC barrier/carrier films, Kohler Co., a company which uses SMC in their bath and showering product lines, alone generates over 1M lb/year of SMC barrier/carrier film waste. Therefore, high amount of SMC barrier/carrier film plastic waste creates a great opportunity for reusing, recycling, or valorization at its end of life. This can be achieved through transition from a linear to a circular supply chain design. However, this transition will not be feasible without overcoming the technical and economic barriers. This project aims to tackle this by making the film circular. Different end of life alternatives will be evaluated experimentally. The reusability of the film will be studied through applying different mechanical and solvent cleaning techniques. The operability concerns regarding the utilization of the cleaned film for long run operations will be addressed by thermally stitching the film. Pelletizing of the cleaned film will also be investigated as a viable technique for recycling or downcycling of the film as molded products. In addition to technical barriers, designing a sustainable circular supply chain for SMC carrier film products requires uncovering the collaboration opportunities between suppliers and users at different stages of the value chain to expand its use to other products. These opportunities will be investigated by finding companies willing to buy or treat the plastic film waste. Finally, the economic viability and environmental impacts of these circular design alternatives will be evaluated through techno-economic assessment (TEA) and life cycle analysis (LCA). Techno-economic and life cycle inventory data for various pathways will also be made available as one of the main outcomes of this project. Preliminary LCA results indicate that the current SMC film supply chain (base case) emits 5.81 tonne CO2 eq. and consumes 104 GJ energy per tonne of SMC film. It is estimated that alternative circular pathways result in 14-20% less CO2 emissions and 34-44% reduction in embodied energy. This project will develop a tool to analyze the circularity and sustainability of hundreds of combinations of alternatives in different life cycle stages. Users of this tool will be able to choose the best combination among these alternatives with respect to the selected economic, environmental and circularity objectives.

circular economy↗
DOE OSTI2024

Technical and Economic Assessment and Gap Analysis of Advanced Nuclear Reactor Integration with a Reference Oil Refinery

Efforts to identify the most-economic methods to decarbonize several sectors of the U.S. economy are underway. Industrial processes such as crude-oil refining rely heavily on energy-dense and easily stored and transported fossil fuels for powering their operations. Refineries use large amounts of energy, primarily derived from fossil sources to separate crude-oil components, break down heavier hydrocarbons into lighter compounds, remove impurities, reform hydrocarbon molecules, and generate steam and electricity for pumps and compressors and other various auxiliary systems. Crude-oil refining operations such as distillation, cracking, desulfurization, reforming, utilities systems and some offsite facilities collectively account for most of the energy consumption. Other operations such as hydrocracking or hydrotreating also require hydrogen for developing hydrogenation reactions which involve substantial heating to keep the reactors at high-temperature and pressure levels. All heat and energy demands are typically provided by natural gas (NG), oil, or other fuels, which makes refinery industry one of the most-difficult sectors to decarbonize. Nuclear power is a viable and energy-dense source of clean electricity, heat, and hydrogen to provide the large, sustainable energy supply that the refining industry demands. The U.S. Department of Energy’s (DOE’s) Integrated Energy Systems (IES) program is working to perform research and development, design, economic siting, and risk analysis. This state-of-the-art work will enable the first on-site demonstrations and commercial deployments of advanced small modular nuclear reactors (SMNRs) integrated with industries such as chemical production, refining, iron and steel making, and more. IES seeks to demonstrate the ability of advanced nuclear reactors to meet the heat and power demands of these industries while reducing carbon emissions in a sustainable and cost-competitive way. The primary objective of this research effort is to analyze industrial-scale SMNR integration intended to decarbonize refining facilities. The foreseen outcome is the provision of reliable, cost-competitive, and sustainable clean energy, alongside a reduction of carbon emissions. Specifically, the focus of this work lies on meeting the reference facilities’ heat and electricity demands with nuclear power while also supplying clean hydrogen via integrated high-temperature steam electrolysis (HTSE). This report presents a comprehensive technical and economic assessment of the integration of advanced nuclear reactors into a reference refinery, leveraging financial incentives from the Inflation Reduction Act (IRA). The evaluation aims to explore the potential economic benefits and challenges associated with incorporating advanced nuclear reactors into refinery operations, particularly in terms of energy efficiency, economic implications and environmental impact. By examining both the technical feasibility and economic viability, this analysis seeks to identify existing gaps and propose solutions for successful nuclear integration implementation. The findings are intended to provide valuable insights for stakeholders considering the adoption of advanced nuclear reactors in the refining sector. A refinery reference-plant was developed, using an open-source refinery model, Petroleum Refinery Lifecycle Inventory Model (PRELIM) and expert assessment, as a base case for comparison with various nuclear integration options. The capacity of 100 kbd/day (KBD) of heavy crude-oil feed was selected to represent a general coking-type refinery with deep conversion capabilities (incorporating heavy-oil upgrading with FCC, coking, and associated hydrotreating process units), using a heavy crude-oil feed, which represents about 70% of U.S. refineries configurations. A summary of all cases considered in this study is shown in Table 1.

13 HYDRO ENERGY↗
DOE OSTI2024

Advances in Miscanthus × Giganteus Planting Techniques May Increase Carbon Uptake in the Establishment Year

Agricultural lands hold significant potential for CO 2 sequestration, particularly when utilizing biomass crops and agricultural residues. Among these, Miscanthus × giganteus (mxg) stands out due to its high productivity and carbon sequestration capabilities. Recognizing the importance of such biomass crops, the Intergovernmental Panel on Climate Change (IPCC) has identified Bioenergy with Carbon Capture and Storage (BECCS) as a crucial strategy for achieving net-zero CO 2 emissions by 2050. This study examines the carbon uptake potential of mxg during its establishment year at the Sustainable Advanced Bioeconomy Research (SABR) farm in Iowa, USA, where mxg was planted at a density exceeding previous studies. Using eddy covariance (EC) measurements, we quantified the net ecosystem carbon exchange (NEE), and derived gross primary productivity (GPP), and ecosystem respiration (R eco ). Our findings reveal that SABR's mxg exhibited a significant carbon uptake of –621 g C m –2 , a threefold increase compared to a similar EC site in the “corn-belt” (University of Illinois Energy Research Farm; UIEF), which was established with lower planting density and pre-commercial planting equipment. Favorable growing conditions and advanced planting technologies at SABR likely contributed to this high carbon uptake. Comparisons with other global EC studies indicated a strong correlation between higher planting densities and greater carbon uptake. These results suggest that increasing mxg planting density can enhance carbon uptake, but further studies are necessary to evaluate the impacts under varying environmental conditions and management practices. Additionally, economic analyses are essential to determine the viability of higher planting densities. Our study underscores the potential of optimized mxg management practices to contribute significantly to CO 2 uptake and supports the development of BECCS as a viable climate change mitigation strategy.

09 BIOMASS FUELS↗
NASA NTRS1985

Excimer laser annealing for fabrication of low-cost solar cells

Pulsed excimer laser annealing was successfully performed using a 50 w laser. Both polished and texturized cells were tried, however, there are serious problems with nonuniformity on texturized cells. A number of cells were produced and compared to diffusion furnace annealed cells. There was no clear economic advantage in using an excimer laser and there was a small penalty on average efficiency. The conclusion was that the excimer laser anneal process must be able to produce superior cells to be considered as a viable process option.

Spitzer, M. B.↗
NASA NTRS1987

Supersonic laminar-flow control

Detailed, up to date systems studies of the application of laminar flow control (LFC) to various supersonic missions and/or vehicles, both civilian and military, are not yet available. However, various first order looks at the benefits are summarized. The bottom line is that laminar flow control may allow development of a viable second generation SST. This follows from a combination of reduced fuel, structure, and insulation weight permitting operation at higher altitudes, thereby lowering sonic boom along with improving performance. The long stage lengths associated with the emerging economic importance of the Pacific Basin are creating a serious and renewed requirement for such a vehicle. Supersonic LFC techniques are discussed.

Bushnell, Dennis M.↗
DOE OSTI2025

Technology & Design Innovations to Maximize the Reduction Effect on DCFC Unit Cost Economics (Max‐REDUCE)

With the high cost and reliability issues of DCFC infrastructure the project specifically addressed the needs of innovating on the AC to DC power conversion. We proved the integration of a new power module into existing charger units, and that theoretical educational work on single stage energy conversion is commercially viable, and a reduced cost compared to existing methods. Our A sample shown 3 PH 480VAC 60hz to 350VDC 8.5kW power transfer, and our software and simulation proved efficiency greater than 97% from 20kW to > 60kW, over the DC output voltage range 200 – 1200V. The project was stopped before we could implement B sample and execute full power testing, validation and integration into a demonstration charger (budget period 3).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS2018

Urban Air Mobility (UAM) Market Study

The Booz Allen Team explored market size and potential barriers to Urban Air Mobility (UAM) by focusing on three potential markets – Airport Shuttle, Air Taxi, and Air Ambulance. We found that the Airport Shuttle and Air Taxi markets are viable, with a significant total available market value in the U.S. of $500 billion, for a fully unconstrained scenario. In this unconstrained best-case scenario, passengers would have the ability to access and fly a UAM at any time, from any location to any destination, without being hindered by constraints such as weather, infrastructure, or traffic volume. Significant legal and regulatory, weather, certification, public perception, and infrastructure constraints exist, which reduce the market potential for these applications to only about 0.5% of the total available market, or $2.5 billion, in the near term. However, we determined that these constraints can be addressed through ongoing intra-governmental partnerships, government and industry collaboration, strong industry commitment, and existing legal and regulatory enablers. We found that the Air Ambulance market is not a viable market if served by electric vertical takeoff and landing (eVTOL) vehicles due to technology constraints but may potentially be viable if a hybrid VTOL aircraft are utilized. The barriers and challenges we characterized in this study can be stratified according to their applicability or potential mitigation through technology as well as market maturity (Figure 1). In the near term, high cost of service will be a key economic challenge. We found potential for significant reduction in service cost through increased vehicle and component efficiency, and automation in a more mature market scenario. Weather conditions also pose a challenge to the UAM market, though there is potential for mitigation of some of these impacts through technology such as sensors enabling operations in low visibility. However, even in a mature market with advanced technology, disruptions are still likely to occur due to weather events such as thunderstorms and strong winds. High density operations will likely stress the current Air Traffic Management (ATM) system in the near term, but technology and new initiatives such as the Air Traffic Management -eXploration project (ATM-X) will enable safe and efficient integration of UAM into the National Airspace System (NAS). Current battery technology creates a barrier in the near term, especially for the Air Ambulance market, as battery weight and extensive recharging times would be needed for these operations. Advancements in battery technology, as well as use of hybrid VTOLs, could significantly reduce this barrier in the longer term. As UAM emerges as a viable mode of transportation in the near term, adverse energy and environmental impacts, particularly noise, may impact community acceptance and potentially persist as the market matures into larger-scale operations. For non-technology related challenges, we found that infrastructure constraints will create a significant barrier to UAM in the near term but could be addressed in the longer term through development and expansion of vertiports. Competition from existing modes of transportation such as ride-sharing (e.g., Lyft, Uber) and ground taxi’s pose a key barrier to UAM in the short term, which will likely evolve into competition from other emerging technologies such as autonomous cars and electric trains in the longer term. Weather events will influence other components of the operation such as passenger comfort (e.g., extreme temperatures, turbulence) and infrastructure (e.g., winter weather causing cracks and degradation in vertiports). There is also potential for these impacts to be heightened in the longer term from the increased frequency of adverse weather such as thunderstorms due to changing climatic conditions. We also found that the public has strong concerns about safety as a passenger in a piloted UAM, including “lasing” of pilots, unruly passengers, and sabotage. They would prefer that all passengers pass through a security screening process before boarding a vehicle. They would also prefer to use UAM for longer regional trips, such as flying from Washington, DC to Baltimore, MD or San Diego, CA to Los Angeles, CA. A longer term automated UAM vehicle market will face challenges due to public apprehension about automation and unmanned operations, and a preference to fly with passengers they know in an autonomous (unmanned) operational scenario.

Rohit Goyal↗
DOE OSTI2021

Barriers to microalgal mass cultivation

Economically successful microalgal mass cultivation is dependent on overcoming several barriers that contribute to the cost of production. The severity of these barriers is dependent on the market value of the final product. These barriers prevent the commercially viable production of algal biofuels but are also faced by any producers of any algal product. General barriers include the cost of water and limits on recycling, costs and recycling of nutrients, CO 2 utilization, energy costs associated with harvesting and biomass loss due to biocontamination and pond crashes. Here, recent advances in overcoming these barriers are discussed.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1985

Putting the 'super' in supercomputers

Computers used for numerical simulations of physical phenomena, e.g., flowfields, meteorology, structural analysis, etc., replace physical experiments that are too expensive or impossible to perform. The problems considered continually become increasingly more complex and thus demand faster processing times to do all necessary computations. The effects components technologies have on computer speed are leveling off, leaving new architectures and programming as the only currently viable means to upgrade speed. Parallel computations, either in the form of array processors, assembly line processing or multiprocessors are being explored using existing microprocessor technologies. Slower hardware configurations can also be made equivalent to faster supercomputers by economic programming. The availability of rudimentary parallel architecture supercomputers for general industrial use is increasing. Scientific applications continue to drive the development of more sophisticated parallel machines.

Schulbach, C.↗
NASA NTRS2009

Strategies For Human Exploration Leading To Human Colonization of Space

Enabling the commercial development of space is key to the future colonization of space and key to a viable space exploration program. Without commercial development following in the footsteps of exploration it is difficult to justify and maintain public interest in the efforts. NASA's exploration program has suffered from the lack of a good commercial economic strategy for decades. Only small advances in commercial space have moved forward, and only up to Earth orbit with the commercial satellite industry. A way to move beyond this phase is to begin the establishment of human commercial activities in space in partnership with the human exploration program. In 2007 and 2008, the authors researched scenarios to make space exploration and commercial space development more feasible as part of their graduate work in the Space Architecture Program at the Sasakawa International Center for Space Architecture at the University of Houston, Houston, Texas. Through this research it became apparent that the problems facing future colonization are much larger than the technology being developed or the international missions that our space agencies are pursuing. These issues are addressed in this paper with recommendations for space exploration, commercial development, and space policy that are needed to form a strategic plan for human expansion into space. In conclusion, the authors found that the current direction in space as carried out by our space agencies around the world is definitely needed, but is inadequate and incapable of resolving all of the issues that inhibit commercial space development. A bolder vision with strategic planning designed to grow infrastructures and set up a legal framework for commercial markets will go a long way toward enabling the future colonization of space.

Smitherman, David↗
DOE OSTI2020

A systems engineering vision for floating offshore wind cost optimization

The U.S. offshore wind resource potential is immense, and often in close proximity to densely-populated coastal load centers. In many U.S. coastal areas, water depths favor the deployment of floating over fixed-bottom offshore wind technology. Floating offshore wind plants have the potential to be cost-competitive with fixed-bottom installations, but because the technology has not yet been deployed at commercial scale, it is not clear when and with what configurations this potential cost parity can be achieved. This article first reviews the state of floating offshore wind technology and deployments to identify key gaps that must be addressed to bring down the overall cost of energy produced. The article then puts forth a long-term vision for a research program and design methodology that may be able to push floating wind plants toward a lower levelized cost of energy than fixed-bottom offshore wind. The method involves a fully integrated systems-engineering and techno-economic design approach to capture the complex interactions between the physics, manufacturing, installation, and operation of floating wind turbines to achieve transformational cost reductions. The approach also envisions multifidelity and uncertainty management strategies to examine the most robust and viable concepts in the design trade-space. To better focus the computational resources, engineering lessons learned from existing offshore wind systems and concept studies are used to develop a set of criteria that can be applied to prefilter candidate technology building blocks that have the greatest cost reduction potential.

17 WIND ENERGY↗
NASA NTRS1998

Demonstration of a Probabilistic Technique for the Determination of Economic Viability of Very Large Transport Configurations

Over the past few years, modem aircraft design has experienced a paradigm shift from designing for performance to designing for affordability. This report contains a probabilistic approach that will allow traditional deterministic design methods to be extended to account for disciplinary, economic, and technological uncertainty. The probabilistic approach was facilitated by the Fast Probability Integration (FPI) technique; a technique which allows the designer to gather valuable information about the vehicle's behavior in the design space. This technique is efficient for assessing multi-attribute, multi-constraint problems in a more realistic fashion. For implementation purposes, this technique is applied to illustrate how both economic and technological uncertainty associated with a Very Large Transport aircraft concept may be assessed. The assessment is evaluated with the FPI technique to determine the cumulative probability distributions of the design space, as bound by economic objectives and performance constraints. These distributions were compared to established targets for a comparable large capacity aircraft, similar in size to the Boeing 747-400. The conventional baseline configuration design space was determined to be unfeasible and marginally viable, motivating the infusion of advanced technologies, including reductions in drag, specific fuel consumption, wing weight, and Research, Development, Testing, and Evaluation costs. The resulting system design space was qualitatively assessed with technology metric "k" factors. The infusion of technologies shifted the VLT design into regions of feasibility and greater viability. The study also demonstrated a method and relationship by which the impact of new technologies may be assessed in a more system focused approach.

Mavris, Dimitri N.↗
DOE OSTI2024

Characteristics of oxide-dispersion strengthened alloys produced by high-temperature severe deformation

This study is to explore an economically attractive and technically feasible processing method for oxide-nanoparticle strengthened alloys for fusion reactor application. Despite many scientific merits of the advanced oxide-dispersion strengthened (ODS) alloys, such as the nanostructured ferritic alloy (NFA) 14YWT, the only viable production path for a high-quality NFA is the high-power mechanical alloying process. This process is often a multi-day high-speed ball milling of alloy powder with a small quantity of yttria (Y 2 O 3 ) powder, followed by the milled-powder consolidation using extrusion or other methods and additional thermomechanical processing (TMP) for property control. This complex production path, including the low-temperature mechanical alloying in particular, has limited technical advancement toward the cost-effective and scale-up production of ODS alloy components. To overcome such a practical limitation, we proposed to explore alternative low-cost processing routes using traditional thermomechanical processing (TMP) method only. Further, a series of continuous TMP cycles, which were designed to impose high-temperature severe plastic deformation (HT-SPD) conditions to the consolidated powder mixtures, were applied to achieve the effective distribution of oxide particles in nanograin structure and thus desirable mechanical properties. Since the reduced-activation ferritic-martensitic (RAFM) alloy powders (Fe-10Cr and Fe-14Cr alloys with various Y contents) are available in our inventory, we focused to utilize the new solid-state synthesis approach for controlling oxide (oxygen source) dissolution and nanoscale clustering in nanograin structure in those alloys. A combination of powder consolidation at 900 °C and continuous thermomechanical activation at 600 °C yielded two essential ODS alloy microstructure contents–nanograin structure and nanoparticle distribution–and thus demonstrated a good combination of strength and ductility.

36 MATERIALS SCIENCE↗
NASA NTRS1985

Rail accelerator technology and applications

Rail accelerators offer a viable means of launching ton-size payloads from the Earth's surface to space. The results of two mission studies which indicate that an Earth-to-Space Rail Launcher (ESRL) system is not only technically feasible but also economically beneficial, particularly when large amounts of bulk cago are to be delivered to space are given. An in-house experimental program at the Lewis Research Center (LeRC) was conducted in parallel with the mission studies with the objective of examining technical feasibility issues. A 1 m long - 12.5 by 12.5 mm bore rail accelerator as designed with clear polycarbonate sidewalls to visually observe the plasma armature acceleration. The general character of plasma/projectile dynamics is described for a typical test firing.

Zana, L. M.↗
DOE OSTI2020

Assessing geothermal/solar hybridization – Integrating a solar thermal topping cycle into a geothermal bottoming cycle with energy storage

Geothermal and concentrating solar power (CSP) technologies typically use heat at different temperatures in their commercial deployments. This enables a technically viable hybridization of a solar topping cycle and a geothermal bottoming cycle at locations where both resources are available. In this article, an underperforming geothermal power system based at Burley, Idaho is used as a baseline to investigate the technical and economic potential of such a hybrid cycle. A direct thermal energy storage (TES) system is also integrated to overcome the intermittency of the solar resource. Design and off-design behavior of key components are modelled to simulate the annual performance of the hybrid system on an hourly basis. The sizing of the solar field and thermal storage is investigated and is seen to significantly impact the annual electricity generation and efficiency. Various cost scenarios for the solar field and thermal energy storage are investigated. An economic metric - levelized cost of electricity (LCOE) - is used to optimize the solar field sizing and TES capacity. The hybrid plant converts the additional solar heat input into additional work with an efficiency of 32.9%. Retrofitting a geothermal plant with solar and eight hours of energy storage can achieve an LCOE of 0.136 $/kWhe in current cost scenarios and 0.081 $/kWhe in a future cost reduction scenario. Although the hybrid system cannot directly compete with current PV systems without batteries, it has an LCOE 32% lower than that of a PV-battery system. This paper provides insights into the research and development of the future grid with a high renewable energy penetration and encourages further study of energy hybridization for improved efficiencies and economics.

15 GEOTHERMAL ENERGY↗