Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “containers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Methods for Preparing Nanoparticle-Containing Thermoplastic Composite Laminates

High quality thermoplastic composites and composite laminates containing nanoparticles and/or nanofibers, and methods of producing such composites and laminates are disclosed. The composites comprise a thermoplastic polymer and a plurality of nanoparticles, and may include a fibrous structural reinforcement. The composite laminates are formed from a plurality of nanoparticle-containing composite layers and may be fused to one another via an automated process.

Gruber, Mark B.↗
NASA NTRS2016

Microstructural and Creep Properties of Boron- and Zirconium-Containing Cobalt-Based Superalloys

The effects of micro-additions of boron and zirconium on grain-boundary (GB) structure and strength inpolycrystalline γ(f.c.c.) plus γ’(L12) strengthened Co-9.5Al-7.5W-X at. % alloys (X=0-Ternary, 0.05B, 0.01B,0.05Zr, and 0.005B-0.05Zr at. %) are studied. Creep tests performed at 850 °C demonstrate that GB strength and cohesion limit the creep resistance and ductility of the ternary B- and Zr-free alloy due to intergranular fracture. Alloys with 0.05B and 0.005B-0.05Zr both exhibit improved creep strength due to enhanced GB cohesion,compared to the baseline ternary Co-9.5Al-7.5W alloy, but alloys containing 0.01B or 0.05Zr additions displayed no benefit. Atom-probe tomography (APT) is utilized to measure GB segregation, where B and Zr are demonstrated to segregate at GBs. A Gibbsian interfacial excess of 5.57 ± 1.04 atoms nm(exp) -2 was found for B at aGB in the 0.01B alloy and 2.88 ± 0.81 and 2.40 ± 0.84 atoms nm2 for B and Zr, respectively, for the 0.005B-0.05Zr alloy. The GBs in the highest B-containing (0.05B) alloy exhibit micrometer-sized boride precipitates with adjacent precipitate denuded-zones (PDZs), whereas secondary precipitation at the GBs is absent in theother four alloys. The 0.05B alloy has the smallest room temperature yield strength, by 6%, which is attributedto the PDZs, but it exhibits the largest increase in creep strength (with an ~2.5 order of magnitude decrease inthe minimum strain rate for a given stress at 850 °C) over the baseline Co-9.5Al-7.5W alloy.

Creep↗
NASA NTRS2017

The Evolution of the Orbiting Sample Container for a Future Mars Sample Return

Although NASA has no specific plans at this time to return samples from Mars, the Program Formulation Office of the Mars Exploration Program sponsors ongoing mission concept studies, systems analyses, and technology investments which explore different strategies for the potential return of samples from Mars, consistent with the charter of the program and stated priorities of the science community. A critical component of such a campaign would be an Orbiting Sample container (OS), which would contain the Mars samples to be returned to Earth. This paper discusses the most recent efforts by the JPL’s Mars Formulation Office to mature an OS design planned for use on a potential Mars Sample Return (MSR) mission. Similar to the “Decadal Study Architecture” [1], the current MSR architecture envisions as a three-mission campaign with each mission serving a critical role towards returning Martian rock and atmospheric samples back to Earth. An OS would be a central piece of hardware in the proposed MSR architecture due to its interfaces to all the three missions of the potential campaign. Additionally, numerous stakeholders and subsystems such as science and planetary protection impose challenging requirements on the OS’s functions and capabilities. As a result, designing an OS that meets all the requirements is challenging and quite complex. The story of the OS’s evolution from black box concept thru to the current-and-still-maturing baseline design is the focus of this paper. From the OS’s launch off Earth aboard a Sample Retrieval Lander (SRL) through to return to Earth, the design and functional requirements generated by and for each stage of the OS’s mission are discussed. Then, with an understanding of what the OS would be required to do, a mapping of the main requirements to the design features of the current OS concept is explained. Many tests and analyses have been conducted to support and validate the current OS design. Results from test and analysis in the areas of aerothermal, impact dynamics, optical tracking, and radio electromagnetics are presented.

Spencer, David↗
NASA NTRS2018

A Study of Various Beacon Antennas for an Orbiting Sample Container of a Future Mars Sample Return Mission

This paper presents some results of a study of various options for a near-omnidirectional low-gain antenna at UHF frequencies, for a Mars Orbiting Sample Return Container (OS). The OS is part of a concept study for a future mission to return samples from Mars. It would be a critical component of such a mission, which would contain the Mars samples. The notional OS would be returned by a separate spacecraft to Earth. The OS would be identified and located by the spacecraft for pick-up from orbit by a beacon signal broadcast via a surface antenna. Several antenna designs were considered, but two promising ones are presented here which have good patterns with a better than 2:1 VSWR (Voltage Standing Wave Ratio), but meet different criteria for OS design options. One is a patch-type antenna and the other a slot-type antenna. Some data and test results of a fabricated breadboard antenna as well as discussions are provided.

Jamnejad, Vahraz↗
NASA NTRS2019

Flux pinning concepts for on-orbit capture and orientation of an MSR orbiting sample container

Concepts for on-orbit capture and orientation of a Mars orbiting sample container (OS) using flux pinning were developed as candidate technologies for potential Mars Sample Return (MSR). The systems consist of a set of type-II superconductors field cooled below their critical temperature using a cryocooler, and operate on an orbiting sample container with a series of permanent magnets spaced around the exterior, along with an integrated layer of shielding to preserve the magnetic properties of the returned samples. Benefits of the approaches include passive, non-contact capture and orientation, as well as a reduction in the number of actuators relative to various mechanical methods.

Chiu, Chi Yeung↗
NASA NTRS2022

Sharing Operational Intent with Containment Confidence Level for Negotiating Deconfliction in Upper Class E Airspace

Community-based Cooperative Separation Management (CSM) is expected to provide separation services in Upper Class E airspace (near and above FL600). Under CSM, operators are responsible for maintaining separation. The CSM concept is enabled by sharing Operational Intent (OI) among the operators to ensure common situation awareness. The OI is represented as four-dimensional (time and space) information that indicates where an aircraft would be contained within the space and time, with a known level of confidence. However, each vehicle’s ability to stay within its region of OI may differ based on each vehicle’s performance characteristics, resulting in varying OI sizes among the vehicles. Such varying OI size could adversely affect efficient and fair access to the airspace. In this paper, an OI-generation algorithm under varying OI size restriction with Containment Confidence Level (CCL) is presented. High-Altitude Long Endurance (HALE) balloon operations are used as an example application. A framework is presented by which CCL information is used in the deconfliction process. A fast-time simulation experiment is conducted to evaluate the feasibility of the proposed framework. The simulation results show a reduced number of unnecessary deconfliction actions.

Upper Class E Traffic Management↗
NASA NTRS2022

Sharing Operational Intent with Containment Confidence Level for Negotiating Deconfliction in Upper Class E Airspace

Community-based Cooperative Separation Management (CSM) is expected to provide separation services in Upper Class E airspace (near and above FL600). Under CSM, operators are responsible for maintaining separation. The CSM concept is enabled by sharing Operational Intent (OI) among the operators to ensure common situation awareness. The OI is represented as four-dimensional (time and space) information that indicates where an aircraft would be contained within the space and time, with a known level of confidence. However, each vehicle’s ability to stay within its region of OI may differ based on each vehicle’s performance characteristics, resulting in varying OI sizes among the vehicles. Such varying OI size could adversely affect efficient and fair access to the airspace. In this paper, an OI-generation algorithm under varying OI size restriction with Containment Confidence Level (CCL) is presented. High-Altitude Long Endurance (HALE) balloon operations are used as an example application. A framework is presented by which CCL information is used in the deconfliction process. A fast-time simulation experiment is conducted to evaluate the feasibility of the proposed framework. The simulation results show a reduced number of unnecessary deconfliction actions.

Upper Class E Traffic Management, ETM, Cooperative↗
NASA NTRSDate not supplied

NASA Capture, Containment, and Return System: Bringing Mars Samples to Earth

The Capture, Containment, and Return System (CCRS) project is NASA’s last step in bringing back Mars samples. CCRS will close a decades-long multi-mission and multi-agency effort to bring Mars surface samples back to Earth for scientific studies. CCRS will launch in 2027 on the European Earth Return Orbiter (ERO) spacecraft, which will provide communications relay for the Mars Sample Return ground missions, Perseverance rover and the Sample Retrieval Lander (SRL) (to be launched in 2028). The main mission for CCRS begins when the first-ever orbital planetary capture operation occurs with CCRS catching and securing the Orbiting Sample (OS)in low Mars orbit. From this point, the system will perform additional "firsts": it will autonomously contain the OS with heat-shrink-fit, sterilize the outside surface, and assemble the Earth entry capsule, named Earth Entry System (EES), in orbit around Mars using a gantry mechanism. At approximately 2.8 Lunar distances from Earth, or 3-days from entry into Earth’s atmosphere, CCRS will open its micrometeoroid shield and release the EES on a ballistic trajectory to Earth. The EES is designed to be a fully passive system that will enter the atmosphere and land without parachute at the Utah Test and Training Range (UTTR).

Mars mission, Sample return, Mission design↗
NASA NTRS2023

Mars Sample Return and The Capture, Containment, and Return System New Design and Path To 2027 Launch

The Mars Sample Return (MSR) campaign is one of the most ambitious and complex exoplanet scientific exploration missions currently underway. With the participation of NASA, ESA, and a large number of industry partners, MSR aims to bring back Martian rock and atmosphere samples with the goal of answering key questions about Mars’ geological, climatological, and (potentially) biological evolution. To accomplish this ambitious goal, the campaign relies on three distinct flight elements and a ground element. The Earth Return Orbiter (ERO) mission that would host the Capture, Containment, and Return System (CCRS) is the last element of the trio. The mission would capture the orbiting sample in low Mars orbit (launched into orbit by another mission), contain it and return it to Earth, landing it at the Utah Test and Training Range (UTTR). The CCRS continues its development. Since its early architecture, several changes were adopted by the project in order to improve overall payload efficiency and reduce mass. CCRS is currently on track to achieve the next milestone, Critical Design Review, expected in late 2024. This paper will discuss the CCRS design, how the current architecture contributes to an improved mission baseline, and the next critical steps of the mission towards its launch.

Mars mission↗
NASA NTRSDate not supplied

Water Collection, Recovery, and Bag Containment Analysis of Trash Models of the Trash Compaction and Processing System (TCPS)

The Trash Compaction and Processing System (TCPS) aims to reduce volume, biologically safen, physically stabilize, manage effluents, and recover resources from astronaut trash in the International Space Station (ISS). The Heat Melt Compactor (HMC) at NASA Ames Research Center (ARC) serves as a test system that supports TCPS development by conducting risk reduction activities associated with an ISS flight demonstration. One of the resources desired to be recovered is water from the trash. The HMC Gen 3 has undergone several tests of different trash models and cases in which a containment bag is used or not. This paper will analyze the water collected and recovered from these tests and analyze the effect of specific trash containment bags.

Janine Criselda Young↗
NASA NTRS2024

NASA's Capture, Containment, and Return System: Bringing Mars Samples to Earth

The Mars Sample Return (MSR) campaign is one of the most ambitious and complex planetary science exploration missions ever pursued. With the participation of NASA, ESA, and many industry partners, MSR aims to bring Martian rock and atmosphere samples to Earth with the goal of answering key questions about Mars’ geological, climatological and, potentially, biological evolution. To accomplish this ambitious goal, the MSR campaign relies on three distinct flight elements and a ground element. The Earth Return Orbiter mission that would host the Capture, Containment, and Return System (CCRS) is the last flight element of the trio. The mission would capture the orbiting sample in low Mars orbit (launched into orbit by another mission), contain it, and return it to Earth, landing at the Utah Test and Training Range. Since its early architecture, several changes were adopted by CCRS to improve overall payload efficiency and reduce mass. This paper will discuss the CCRS design, how the current CCRS architecture contributes to an improved mission concept, and the next critical steps of the mission toward its launch.

Mars mission↗
NASA NTRSDate not supplied

Electrical Discharge Machining of Additively Manufactured Superalloys Containing Oxide Dispersions

Superalloys can be strengthened by oxide dispersions to potentially improve their mechanical properties at high temperatures. Additive manufacturing has opened new paths for introducing oxide particles into superalloys with increased processing flexibility, to potentially provide oxide dispersion strengthening. Numerically controlled electrical discharge machining (EDM) has often been used as a machining process for initial sectioning, detailed roughing, and even finishing operations of conventional superalloys. The objective of this study was to examine how additively manufactured superalloys containing oxide dispersions respond when sectioned using EDM. Consistent sections of several superalloys, two containing an oxide dispersion, were sliced using a typical EDM machine with standard brass wire and a typical roughing condition set. Roughness, microstructure, and residual stress at the EDM surfaces were compared for the varied superalloys.

superalloys↗
NASA NTRS2024

Interim Measures Pilot Study Completion Report, South Repeater Building, Solid Waste Management Unit 121, Hydraulic Containment and Groundwater Treatment System for Per- and Polyfluoroalkyl Substances

This Per- and Polyfluoroalkyl Substances (PFAS) Interim Measures Pilot Study Completion Report was prepared for the National Aeronautics and Space Administration by AECOM Technical Services, Inc. under Contract 80KSC019D0010, Task Order 80KSC021F0096. The purpose of this report is to document the pilot study activities at the South Repeater Building, Solid Waste Management Unit (SWMU) 121. This report details the additional assessment activities completed from June 2023 through November 2023 and the subsequent pilot study completed at the South Repeater Building conducted in December 2023 through February 2024. Initial activities were conducted in accordance with the Pilot Study Work Plan (NASA 2023), submitted to the KSC Remediation Team and accepted by the team on October 26, 2023. The objectives of the pilot study were to: • Provide information on aquifer characteristics and to aid in future modeling and remedial design activities to mitigate off-KSC migration of PFAS compounds. • Develop information on characteristics of the surficial aquifer system, specifically transmissivity, storage coefficient, hydraulic conductivity, and vertical hydraulic conductivity. • Obtain data to support construction and calibration of a groundwater flow model. • Acquire design parameters necessary for future remedial design activities, specifically radius of influence, drawdown, flow rates, and pump settings. The following activities were completed to meet the pilot study objectives: • Groundwater and surface water sampling • Geophysical investigation via Hydraulic Profiling Tool (HPT) and soil sampling • Installation of observation and extraction wells via rotosonic techniques • Slug, step, and pump testing activities • Initial modeling efforts for a groundwater hydraulic containment system. Results of the pilot study and modeling activities are being used in the development of a groundwater containment and treatment system for the site.

PFAS↗
NASA NTRSDate not supplied

Preliminary Design of Robotic Control Software for Mars Sample Return - Capture, Containment, and Return System

The Mars Sample Return (MSR) campaign aims to acquire and return to Earth a set of Mars samples for investigation in terrestrial laboratories. Mars 2020 has collected an adequate number of samples and deposited them in sealed sample tubes at a designated Martian depot. Sample tubes will be placed in cylindrical containers called Orbiting Samples (OS) by the Perseverance Rover, and later brought to Earth by the Earth Return Orbiter (ERO) and the MSR - Capture, Containment, and Return System (CCRS). Robot Software (RSW) is a set of software processes for commanding and monitoring the avionics that controls robotic mechanisms designed to sterilize and install OS into Earth Entry System (EES) for return to Earth. This paper describes a preliminary design of RSW including motion modes, architecture, and finite state machine. Additionally, software engineering procedures and testing of RSW is provided. A preliminary performance analysis is presented and the paper concludes with future work and a discussion of design decisions.

MSR↗
DOE OSTI2020

Battery with aluminum-containing cathode

A battery includes an anode chamber configured to contain an anolyte and including an anode, a cathode chamber configured to contain a catholyte including a cathode, and a separator between the anode chamber and the cathode chamber. The anode includes sodium, and the cathode includes aluminum. The battery is configured to be operated above a melting point of the anolyte and the catholyte, such that the anolyte is a molten anolyte and the catholyte is a molten catholyte.

25 ENERGY STORAGE↗
DOE OSTI2020

Electrolyte formulations for electrochemical cells containing a silicon electrode

Additives to electrolytes that enable the formation of comparatively more robust SEI films on silicon anodes. The SEI films in these embodiments are seen to be more robust in part because the batteries containing these materials have higher coulombic efficiency and longer cycle life than comparable batteries without such additives. The additives preferably contain a nitrate group.

25 ENERGY STORAGE↗
DOE OSTI2020

Compositions and methods for making selenocysteine containing polypeptides

Non-naturally occurring tRNASec and methods of using them for recombinant expression of proteins engineered to include one or more selenocysteine residues are disclosed. The non-naturally occurring tRNASec can be used for recombinant manufacture of selenocysteine containing polypeptides encoded by mRNA without the requirement of an SECIS element. In some embodiments, selenocysteine containing polypeptides are manufactured by co-expressing a non-naturally occurring tRNASec a recombinant expression system, such as E. coli, with SerRS, EF-Tu, SelA, or PSTK and SepSecS, and an mRNA with at least one codon that recognizes the anticodon of the non-naturally occurring tRNASec.

Soll, Dieter↗
DOE OSTI2021

Crosslinked functional binders and their use in silicon-containing anodes of lithium-ion batteries

A crosslinked polymer composition comprising: (i) a base polymer containing a multiplicity of at least one type of functional group selected from amino, amido, thiol, carboxylic acid, carboxylic acid ester, and epoxy groups; (ii) a multiplicity of hydroxylated benzene rings covalently linked to the base polymer, wherein each hydroxylated benzene ring contains at least two hydroxy groups, and with at least two of the hydroxy groups on said hydroxylated benzene rings being free as OH groups; and (iii) a multiplicity of crosslinking groups that crosslink at least two of said functional groups in the base polymer. The invention is also directed to lithium-ion batteries in which the above-described composition is incorporated in an electrode of the battery, and also directed to methods of operating a lithium-ion battery in which the above-described crosslinked polymer composition is incorporated in an electrode thereof.

Saito, Tsuguyuki↗