Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “conformance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Development of a computer code for calculating the steady super/hypersonic inviscid flow around real configurations. Volume 2: Code description

A numerical procedure was developed to compute the inviscid super/hypersonic flow field about complex vehicle geometries accurately and efficiently. A second-order accurate finite difference scheme is used to integrate the three-dimensional Euler equations in regions of continuous flow, while all shock waves are computed as discontinuities via the Rankine-Hugoniot jump conditions. Conformal mappings are used to develop a computational grid. The effects of blunt nose entropy layers are computed in detail. Real gas effects for equilibrium air are included using curve fits of Mollier charts. Typical calculated results for shuttle orbiter, hypersonic transport, and supersonic aircraft configurations are included to demonstrate the usefulness of this tool.

Marconi, F.↗
NASA NTRS1976

Research in large adaptive antenna arrays

The feasibility of microwave holographic imaging of targets near the earth using a large random conformal array on the earth's surface and illumination by a CW source on a geostationary satellite is investigated. A geometrical formulation for the illuminator-target-array relationship is applied to the calculation of signal levels resulting from L-band illumination supplied by a satellite similar to ATS-6. The relations between direct and reflected signals are analyzed and the composite resultant signal seen at each antenna element is described. Processing techniques for developing directional beam formation as well as SNR enhancement are developed. The angular resolution and focusing characteristics of a large array covering an approximately circular area on the ground are determined. The necessary relations are developed between the achievable SNR and the size and number of elements in the array. Numerical results are presented for possible air traffic surveillance system. Finally, a simple phase correlation experiment is defined that can establish how large an array may be constructed.

Berkowitz, R. S.↗
NASA NTRS1976

A LANDSAT digital image rectification system

DIRS is a digital image rectification system for the geometric correction of LANDSAT multispectral scanner digital image data. DIRS removes spatial distortions from the data and brings it into conformance with the Universal Transverse Mercator (UTM) map projection. Scene data in the form of landmarks are used to drive the geometric correction algorithms. Two dimensional least squares polynominal and spacecraft attitude modeling techniques for geometric mapping are provided. Entire scenes or selected quadrilaterals may be rectified. Resampling through nearest neighbor or cubic convolution at user designated intervals is available. The output products are in the form of digital tape in band interleaved, single band or CCT format in a rotated UTM projection. The system was designed and implemented on large scale IBM 360 computers.

Vanwie, P.↗
NASA NTRS1976

Calculation of the longitudinal aerodynamic characteristics of wing-flap configurations with externally blown flaps

An analytical method for predicting the longitudinal aerodynamic characteristics of externally blown flap configurations is described. Two potential flow models make up the prediction method: a wing and flap lifting-surface model and a turbofan engine wake model. A vortex-lattice lifting-surface method is used to represent the wing and multiple-slotted trailing-edge flaps. The jet wake is represented by a series of closely spaced vortex rings normal to a centerline which is free to move to conform to the local flow field. The two potential models are combined in an iterative fashion to predict the jet wake interference effects on a typical EBF configuration. Comparisons of measured and predicted span-load distributions, individual surface forces, forces and moments on the complete configuration, and flow fields are included.

Mendenhall, M. R.↗
NASA NTRS1976

Calculation of subsonic and supersonic steady and unsteady aerodynamic forces using velocity potential aerodynamic elements

Expressions for calculation of subsonic and supersonic, steady and unsteady aerodynamic forces are derived, using the concept of aerodynamic elements applied to the downwash velocity potential method. Aerodynamic elements can be of arbitrary out of plane polygon shape, although numerical calculations are restricted to rectangular elements, and to the steady state case in the supersonic examples. It is suggested that the use of conforming, in place of rectangular elements, would give better results. Agreement with results for subsonic oscillating T tails is fair, but results do not converge as the number of collocation points is increased. This appears to be due to the form of expression used in the calculations. The methods derived are expected to facilitate automated flutter analysis on the computer. In particular, the aerodynamic element concept is consistent with finite element methods already used for structural analysis. The method is universal for the complete Mach number range, and, finally, the calculations can be arranged so that they do not have to be repeated completely for every reduced frequency.

Haviland, J. K.↗
NASA NTRS1976

Real time flight simulation methodology

An example sensitivity study is presented to demonstrate how a digital autopilot designer could make a decision on minimum sampling rate for computer specification. It consists of comparing the simulated step response of an existing analog autopilot and its associated aircraft dynamics to the digital version operating at various sampling frequencies and specifying a sampling frequency that results in an acceptable change in relative stability. In general, the zero order hold introduces phase lag which will increase overshoot and settling time. It should be noted that this solution is for substituting a digital autopilot for a continuous autopilot. A complete redesign could result in results which more closely resemble the continuous results or which conform better to original design goals.

Parrish, E. A.↗
NASA NTRS1975

System consideration, design approach and test of a low gain spherical coverage antenna for large space vehicles

A fixed beam array antenna approach is proposed to meet the omnidirectional receiving and transmitting requirements of LST (Large Space Telescope). The proposed method uses an antenna of known performance and scales the size and frequency to conform with the LST 1/5-th scale model. The simplification that the approach provides over switching antenna elements on board the LST or switching from the ground by frequency diversity makes it worthy of consideration against the factors of performance, cost, reliability, and operations complexity. For LST applications, the system capabilities, requirements, and margins are summarized. The areas to be covered by further investigations into the proposed LST antenna are noted.

Ferguson, R. E.↗
NASA NTRS1975

The use of back corrections in multistep methods of numerical integration

Generalized multistep methods for the numerical solution of nonlinear systems of ordinary differential equations are introduced which allow the correction of previously computed values of the solution at internal points of the grid. These methods are shown to possess enhanced numerical stability. Preliminary numerical results indicate that for some satellite orbit problems these methods also possess greater overall efficiency. A uniformly converging theory of error propagation is presented which is valid for nonasymptotic values of the step size. Experimental results are seen to conform with theory.

Beaudet, P.↗
NASA NTRS1976

Accelerated iterative calculation of transonic nacelle flowfields

A method is presented for the calculation of inviscid, supercritical flowfields about axisymmetric inlet cowls. A finite-difference calculation is performed in a simple, rectangular domain obtained from the nacelle geometry by a nearly-conformal mapping procedure. Type-dependent finite-differences are constructed using a coordinate-independent, 'rotated' differencing scheme. Methods of accelerating convergence of the iterative solution are demonstrated including a hybrid fast-Poisson-solver/relaxation scheme and an extrapolated relaxation procedure. Calculated pressure distributions are compared with experimental data for a variety of Mach numbers and mass-flow ratios, and show generally good agreement.

Caughey, D. A.↗
NASA NTRS1974

X-ray powder diffraction study of poly/carbon monofluoride/, CF/1.12/

Data from X-ray diffraction studies of the poly(carbon monofluoride) with empirical formula CF(1.09-1.15) are reported, and possible intercalation arrangements for the substance are discussed. The data do not conform to true hexagonal symmetry, indicating that the carbon atoms are not coplanar. Each bond angle of carbon is 118.8 deg, and the carbon-carbon distance is 1.47 A. The interlayer distance is 5.76 A. A total absence of (hkl) reflections in the X-ray pattern shows that the separate CF layers are not regularly arranged with respect to one another.

Mahajan, V. K.↗
NASA NTRS1976

Heat flow anomaly associated with dike intrusion. II

An investigation reported by Horai (1974) is continued. A special case of the steady state temperature field associated with dike intrusion is studied, taking into account an infinite vertical downward extension of the isotherm of rectangular shape approximating the dike. The considered case represents a problem of two-dimensional steady state thermal conduction. The technique of conformal mapping used is identical to the method employed by Horai (1974). The characteristics of surface heat flow associated with an infinitesimal thin dike of certain temperature with the considered extension are shown in a graph.

Horai, K.-I.↗
NASA NTRS1975

Flows of impact melt at lunar craters

Lavalike materials that were emplaced in a fluid state occur in and around lunar impact craters whose diameters range from 3 km to more than 200 km and whose ages span a time interval of at least 3.5 billion years. The distribution of the lavalike deposits conforms to asymmetries of other ejecta from the same craters, and the material is concentrated downrange to distances as great as a crater radius. The character and distribution of the lavalike materials support the idea that they formed by impact melting rather than by volcanism. Returned samples indicate that materials with appropriate physical characteristics are generated by partial melting of feldspathic rocks by impact. The geologic evidence at lunar craters suggests that there is more melt rock in and near the craters than is predicted by experiment and theory.

Howard, K. A.↗
NASA NTRS1976

Possibility of detecting magnetospheric radio bursts from Uranus and Neptune

The intensity of magnetospheric radio bursts (MRBs) is scaled to solar-wind input into planetary magnetospheres and the frequency of emission is scaled to polar surface magnetic-field strength in order to estimate the possibility of detecting MRBs from Uranus and Neptune. A scaling law is derived which relates the ratio of power radiated in MRBs to the solar-wind input for earth, Jupiter, and Saturn. Power-flux spectra of MRBs from these three planets are plotted, and it is shown that Jupiter and Saturn may radiate 1% to 5% of the solar-wind energy input into their magnetospheres. The properties of MRBs from Uranus and Neptune are estimated by assuming a conversion efficiency of 1% to 5%, a bandwidth of half the peak frequency, and conformity of Uranus' and Neptune's dipole moments with the magnetic Bode's law. Based on the results, it is suggested that detection of MRBs from these two planets may be a reasonable cruise-mode radio-astronomy objective on future missions to the outer solar system.

Kennel, C. F.↗
NASA NTRS1976

A finite element solution of unsteady transonic flow problems for three-dimensional wings and bodies

A computerized finite element method has been developed to solve a form of the three-dimensional inviscid, irrotational unsteady transonic equation for pointed and rectangular wings and wing-body combinations. The equation is a 'parabolized' version of the full unsteady transonic equation which includes the effect of the advancing wave and the acceleration in the steady flow field thus including a thickness effect. Automatic mesh generation using conformal mapping has the advantage of allowing relatively arbitrary cross-sections to be closely approximated while taking advantage of the body's similarity to a more simple configuration. Plunge, pitch, and roll modes are computed

Kimble, K. R.↗
NASA NTRS1976

Aeroacoustics: Fan noise and control; Duct acoustics; Rotor noise

The recent progress in duct acoustic research is reflected by fourteen papers which cover essentially the areas of linear duct acoustics, the characteristics of absorbent materials, and nonlinear duct acoustics. With respect to propagation in ducts, emphasis is placed on computational methods aimed at attaining effective economical modeling of propagation in variable-geometry and in hard-wall or soft-wall ducts. Computational methods developed to reduce computer processing and storage requirements are outlined, along with a wave envelope technique for reducing processing and storage needs. The latter technique is applied to the optimum segmented acoustic duct linear design. A finite difference technique is used in combination with conformal mapping to compute the optimum multisection duct linear design.

Schwartz, I. R.↗
NASA NTRS1976

A systematic method for computer design of supercritical airfoils in cascade

A computer code has been developed for the direct calculation of shockless transonic airfoils whose pressure distributions can be assigned within reasonable limits. The partial differential equations of two-dimensional inviscid gas dynamics are solved by analytic continuation into the domain of two independent complex characteristic coordinates. The domain of integration is mapped conformally onto the unit circle in the hodograph plane of one of these coordinates. It is possible to formulate a boundary value problem on this circle for the stream function that is well posed in the case of transonic flow. This enables the formulation of a procedure for the calculation of an airfoil on which the speed is prescribed as a function of the arc length

Garabedian, P.↗
NASA NTRS1976

Calculation of the longitudinal aerodynamic characteristics of wing-flap configurations with externally blown flaps

A theoretical investigation was carried out to extend and improve an existing method for predicting the longitudinal characteristics of wing flap configurations with externally blown flaps (EBF). Two potential flow models were incorporated into the prediction method: a wing and flap lifting-surface model and a turbofan engine wake model. The wing-flap model uses a vortex-lattice approach to represent the wing and flaps. The jet wake model consists of a series of closely spaced vortex rings normal to a centerline which may have vertical and lateral curvature to conform to the local flow field beneath the wing and flaps. Comparisons of measured and predicted pressure distributions, span load distributions on each lifting surface, and total lift and pitching moment coefficients on swept and unswept EBF configurations are included. A wide range of thrust coefficients and flap deflection angles is considered at angles of attack up to the onset of stall. Results indicate that overall lift and pitching-moment coefficients are predicted reasonably well over the entire range. The predicted detailed load distributions are qualitatively correct and show the peaked loads at the jet impingement points, but the widths and heights of the load peaks are not consistently predicted.

Mendenhall, M. R.↗