Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cloud ice”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

The Influence of Sea ice on Arctic Cloud Properties: What Can We Learn by Applying a In Situ Observational Strategy to Satellite Data?

Sea ice is declining because of anthropogenic climate change. This change alters many aspects of the Arctic climate system, including the way that the surface and atmosphere interact. Atmosphere-surface coupling processes represent an important cloud feedback mechanism that can alter the Arctic surface energy budget. For the Arctic, it has been hypothesized that a reduction in sea ice cover could lead to an increase in clouds. If this process were to occur as originally hypothesized, sea ice loss in all seasons would lead to an increase in clouds. Recent observational studies find a cloud response to sea ice loss in non-summer months and no cloud response in summer months. However, previous studies rely on inter-annual variability and reanalysis to control for the influence of meteorology, reducing the confidence in the resulting conclusions. We adopt a phenomenological, event-based approach that does not need to use meteorological reanalysis. The approach analyzes cloud properties derived from CALIPSO-CloudSat over sea ice and adjacent ice-free footprints by compositing individual satellite ground tracks that cross the Arctic sea ice edge. The underlying assumption, which we verify, is that footprints that are close to each other in space and time experience similar large-scale meteorological conditions. Our results show larger cloud fraction and more cloud liquid water over ice-free than over sea ice footprints and provide additional evidence for a seasonal dependence of cloud-sea ice coupling that is in line with previous work. We find a different result where the maximum cloud property differences between sea ice and ice-free ocean occurs in spring, not fall as earlier studies suggest. We argue that these cloud differences between sea ice and ice-free ocean are primarily caused by the influence of the surface type on the thermodynamic stability of the lower troposphere and not principally from an increase in surface evaporation. In addition, we explore the sensitivity of these results to marginal ice zone width, season, Atlantic vs. Pacific sector, and the cloud property dependence on the distance from the sea ice edge. Overall, our results provide further evidence that cloud-sea ice coupling processes are not offsetting the observed surface energy budget perturbation due to sea ice loss in summer; thus, the cloud response to declining sea ice appears to contribute to amplified Arctic warming.

Patrick C Taylor↗

SSH-2 measurements of cirrus at 18-28 micrometers from the King Air during FIRE 2

In November of 1991, the First ISCCP (International Satellite Cloud Climatology Project) Regional Experiment (FIRE) Phase II cirrus study took place at Coffeyville, Kansas. The field experiment incorporated instrumentation from surface, aircraft, and satellite to attempt to define the optical, radiative, and microphysical characteristics of these high altitude, predominantly ice clouds. The NCAR King Air research aircraft was outfitted with a variety of radiative and microphysical instrumentation for the FIRE II project. Included for this project was the SSH-2, a 16-channel passive radiometer. The SSH-2 was originally designed as a space-qualified infrared (IR) temperature and water vapor sounder for deployment onboard the Defense Meteorological Satellite Program (DMSP) series of environmental satellites. For this experiment, only those channels associated with the water vapor profiling function have been examined although downwelling radiance measurements were taken at all channels during the project. With supporting information from the aircraft telemetry observations it may be possible to relate these SSH-2 measurements to cloud radiative and microphysical properties. The following sections will describe the spectral characteristics of the instrument, the calibration scheme used to convert the raw measured counts into calibrated radiances, and the case studies that will be covered in this paper. This will be followed by a discussion of the results of this preliminary investigation and a description of future work to be done.

Griffin, Michael K.↗

ICESat-2 Tracking App for Public Engagement

Information regarding the predicted ground tracks of Earth observing satellites is typically difficult to find and understand for the general public. This paper will describe and demonstrate an iOS mobile application for tracking NASA’s ICESat-2 (Ice, Cloud, and land Elevation Satellite 2), making it easier for users to see exactly when the satellite will be passing over any location in the world. ICESat-2, launched in 2018, uses green lasers to track elevation changes in polar ice and indirectly measure trees, land, and water, providing a precise height map of our planet. Most satellite tracking mobile apps display information about where a specific satellite is at that given moment and when it will be passing over the user’s location in the near future. ICESat-2 the app differs by allowing users to search for data about the satellite’s future flybys relative to a specific search location and radius that they get to choose. The search results include points up to three months into the future. By supplying user-centric results, users are provided relevant data in an easy-to- access manner. Additionally, this data is very clear to visualize in-app through maps, pins, and ground track lines. This becomes an incredibly useful tool not only to plan an observation of the satellite as it passes, but also for knowing when elevation data for a specific area will be available. In addition, this flyby information helps students and citizen scientists take more valuable tree height measurements to better validate the elevation data collected by the satellite. To achieve this outreach product, three key components were developed. These include a Python script to simplify the raw ground track data, a Node.js server that actively takes requests, and the iOS app itself. From initial beta tests, it has been noted that providing users with a map for visual awareness of search radius and result coordinates gives them a more comprehensive understanding of the data. Overall, by cleaning the raw data and making it available in a much more accessible and easier to understand way, ICESat-2 the app has exceeded expectations in providing educational and exciting data for all.

Harbeck, Kaitlin↗

Directly Measured Heating Rates of a Tropical Subvisible Cirrus Cloud

We present the first direct measurements of the infrared and solar heating rates of a tropical subvisible cirrus (SVC) cloud sampled off the east coast of Nicaragua on 25 July 2007 by the NASA ER-2 aircraft during the Tropical Composition, Cloud and Climate Coupling Experiment (TC4). On this day a persistent thin cirrus layer, with mostly clear skies underneath, was detected in real time by the cloud lidar on the ER-2, and the aircraft was directed to profile down through the SVC. Measurements of the net broadband infrared irradiance and spectrally integrated solar irradiance above, below, and through the SVC are used to determine the infrared and solar heating rates of the cloud. The lidar measurements show that the variable SVC layer was located between approximately 13 and 15 km. Its midvisible optical depth varied from 0.01 to 0.10 with a mean of 0.034 +/- 0.033. Its depolarization ratio was approximately 0.4, indicative of ice clouds. From the divergence of the measured net irradiances the infrared heating rate of the SVC was determined to be approximately 2.50 - 3.24 K/d and the solar heating rate was found to be negligible. These values are consistent with previous indirect observations of other SVC and with model-generated heating rates of SVC with similar optical depths. This study illustrates the utility and potential of the profiling sampling strategy employed here. A more fully instrumented high-altitude aircraft that also included in situ cloud and aerosol probes would provide a comprehensive data set for characterizing both the radiative and microphysical properties of these ubiquitous tropical clouds

Bucholtz, Anthongy↗

ICESat-2 Early Mission Synopsis and Observatory Performance

The Advanced Topographic Laser Altimetry System (ATLAS) onboard the NASA Ice, Cloud and land Elevation Satellite-2 (ICESat-2) is the newest and most recent Earth observing satellite for global elevation studies. The primary objectives for ICESat-2 follow that of its predecessor, ICESat, and focus on providing cryospheric measurements to determine ice sheet mass balance, and monitor both sea ice thickness and extent. However, the global observations support secondary science objectives such as biomass estimation, inland water elevation, sea state height and aerosol concentrations. In all, ATLAS measurements support 7 along-track geophysical products with multiple gridded products to provide regional and global change detection for seasonal and annual cycles. Since the launch of ICESat-2, the instrument has operated nominally and collected more than a trillion measurements. This paper provides an overview of the mission, a description of the operational components that support the altimeter products for science discovery and on-orbit observatory performance.

Lori Magruder↗

(GO)2-SIM: a GCM-Oriented Ground-Observation Forward-Simulator Framework for Objective Evaluation of Cloud and Precipitation Phase

General circulation model (GCM) evaluation using ground-based observations is complicated by inconsistencies in hydrometeor and phase definitions. Here we describe (GO)2-SIM, a forward simulator designed for objective hydrometeor-phase evaluation, and assess its performance over the North Slope of Alaska using a 1-year GCM simulation. For uncertainty assessment, 18 empirical relationships are used to convert model grid-average hydrometeor (liquid and ice, cloud, and precipitation) water contents to zenith polarimetric micropulse lidar and Ka-band Doppler radar measurements, producing an ensemble of 576 forward-simulation realizations. Sensor limitations are represented in forward space to objectively remove from consideration model grid cells with undetectable hydrometeor mixing ratios, some of which may correspond to numerical noise.Phase classification in forward space is complicated by the inability of sensors to measure ice and liquid signals distinctly. However, signatures exist in lidar–radar space such that thresholds on observables can be objectively estimated and related to hydrometeor phase. The proposed phase-classification technique leads to misclassification in fewer than 8% of hydrometeor-containing grid cells. Such misclassifications arise because, while the radar is capable of detecting mixed-phase conditions, it can mistake water- for ice-dominated layers. However, applying the same classification algorithm to forward-simulated and observed fields should generate hydrometeor-phase statistics with similar uncertainty. Alternatively, choosing to disregard how sensors define hydrometeor phase leads to frequency of occurrence discrepancies of up to 40%. So, while hydrometeor-phase maps determined in forward space are very different from model "reality" they capture the information sensors can provide and thereby enable objective model evaluation.

Lamer, K.↗

Laser Altimetry Sampling Strategies over Sea Ice

With the conclusion of the science phase of the Ice, Cloud and land Elevation Satellite (ICESat) mission in late 2009, and the planned launch of ICESat-2 in late 2015, NASA has recently established the IceBridge program to provide continuity between missions. A major goal of IceBridge is to obtain a sea-ice thickness time series via airborne surveys over the Arctic and Southern Oceans. Typically two laser altimeters, the Airborne Topographic Mapper (ATM) and the Land, Vegetation and Ice Sensor (LVIS), are utilized during IceBridge flights. Using laser altimetry simulations of conventional analogue systems such as ICESat, LVIS and ATM, with the multi-beam system proposed for ICESat-2, we investigate differences in measurements gathered at varying spatial resolutions and the impact on sea-ice freeboard. We assess the ability of each system to reproduce the elevation distributions of two seaice models and discuss potential biases in lead detection and sea-surface elevation, arising from variable footprint size and spacing. The conventional systems accurately reproduce mean freeboard over 25km length scales, while ICESat-2 offers considerable improvements over its predecessor ICESat. In particular, its dense along-track sampling of the surface will allow flexibility in the algorithmic approaches taken to optimize the signal-to-noise ratio for accurate and precise freeboard retrieval.

Farrell, Sinead L.↗

Mabel Engineering Flights, 2010-2013: Flight Report

In December 2010, NASA deployed for the first time the Multiple Altimeter Beam Experimental Lidar (MABEL), an airborne simulator for Ice, Cloud, and land Elevation Satellite-2 (ICESat-2) algorithm development. Between 2010 and 2013, engineering flights were conducted in the continental United States, to ready the instrument for deployments to Alaska and Iceland, where flight lines could be designed and flown over sea ice and grounded ice. Ultimately, MABEL engineering missions included: 1) flights based out of NASA Armstrong Flight Research Center (California, formerly Dryden Flight Research Center) in 2010, 2011, and 2012; flights based out of NASA Wallops Flight Facility (Virginia) in 2012; flights based out of NASA Langley Research Center (Virginia) in 2013; and flights based out of the Mojave Air and Space Port (California) in 2013.

Brunt, Kelly M.↗

Large-scale variations in ozone and polar stratospheric clouds measured with airborne lidar during formation of the 1987 ozone hole over Antarctica

A joint field experiment between NASA and NOAA was conducted during August to September 1987 to obtain in situ and remote measurements of key gases and aerosols from aircraft platforms during the formation of the ozone (O3) hole over Antarctica. The ER-2 (advanced U-2) and DC-8 aircraft from the NASA Ames Research Center were used in this field experiment. The NASA Langley Research Center's airborne differential absorption lidar (DIAL) system was operated from the DC-8 to obtain profiles of O3 and polar stratospheric clouds in the lower stratosphere during long-range flights over Antarctica from August 28 to September 29, 1987. The airborne DIAL system was configured to transmit simultaneously four laser wavelengths (301, 311, 622, and 1064 nm) above the DC-8 for DIAL measurements of O3 profiles between 11 to 20 km ASL (geometric altitude above sea level) and multiple wavelength aerosol backscatter measurements between 11 to 24 km ASL. A total of 13 DC-8 flights were made over Antarctica with 2 flights reaching the South Pole. Polar stratospheric clouds (PSC's) were detected in multiple thin layers in the 11 to 21 km ASL altitude range with each layer having a typical thickness of less than 1 km. Two types of PSC's were found based on aerosol backscattering ratios: predominantly water ice clouds (type 2) and clouds with scattering characteristics consistent with binary solid nitric acid/water clouds (type 1). Large-scale cross sections of O3 distributions were obtained. The data provides additional information about a potentially important transport mechanism that may influence the O3 budget inside the vortex. There is also some evidence that strong low pressure systems in the troposphere are associated with regions of lower stratospheric O3. This paper discusses the spatial and temporal variations of O3 inside and outside the polar vortex region during the development of the O3 hole and relates these data to other measurements obtained during this field experiment.

Browell, Edward V.↗

Assessing CryoSat-2 Antarctic Snow Freeboard Retrievals Using Data From ICESat-2

NASA's Ice, Cloud, and land Elevation Satellite-2 (ICESat-2) laser altimeter launched in Fall 2018, providing an invaluable addition to the polar altimetry record generated by ESA's CryoSat-2 radar altimeter. The simultaneous operation of these two satellite altimeters enables unique comparison studies of sea ice altimetry, utilizing the different frequencies and profiling strategies of the two instruments. Here, we use freeboard data from ICESat-2 to assess Antarctic snow freeboard retrievals from CryoSat-2. We first discuss updates made to a previously published CryoSat-2 retrieval process and show how this Version 2 algorithm improves upon the original method by comparing the new retrievals to ICESat-2 in specific along-track profiles as well as on the basin-scale. In two near-coincident along-track profiles, we find mean snow freeboard differences (standard deviations of differences) of 0.3 (9.3) and 7.6 cm (9.6 cm) with 25 km binned correlation coefficients of 0.77 and 0.89. Monthly mean freeboard differences range between −2.9 (10.8) and 6.6 cm (16.8 cm) basin wide, with the largest differences typically occurring in Austral fall months that is hypothesized to be related to new ice growth and the use of static snow backscatter coefficients in the retrieval. Monthly mean correlation coefficients range between 0.57 and 0.80. While coincident data show good agreement between the two sensors, they highlight issues related to geometric and frequency sampling differences that can impact the freeboard distributions.

S W Fons↗

ICESat Laser Altimeter Pointing, Ranging and Timing Calibration from Integrated Residual Analysis: A Summary of Early Mission Results

On January 12, 2003 the Ice, Cloud and land Elevation Satellite (ICESat) was successfully placed into orbit. The ICESat mission carries the Geoscience Laser Altimeter System (GLAS), which consists of three near-infrared lasers that operate at 40 short pulses per second. The instrument has collected precise elevation measurements of the ice sheets, sea ice roughness and thickness, ocean and land surface elevations and surface reflectivity. The accurate geolocation of GLAS's surface returns, the spots from which the laser energy reflects on the Earth's surface, is a critical issue in the scientific application of these data Pointing, ranging, timing and orbit errors must be compensated to accurately geolocate the laser altimeter surface returns. Towards this end, the laser range observations can be fully exploited in an integrated residual analysis to accurately calibrate these geolocation/instrument parameters. Early mission ICESat data have been simultaneously processed as direct altimetry from ocean sweeps along with dynamic crossovers resulting in a preliminary calibration of laser pointing, ranging and timing. The calibration methodology and early mission analysis results are summarized in this paper along with future calibration activities.

Scott B Luthcke↗

Accelerating Ice Loss From Peripheral Glaciers in North Greenland

In recent decades, Greenland's peripheral glaciers have experienced large-scale mass loss, resulting in a substantial contribution to sea level rise. While their total area of Greenland ice cover is relatively small (4%), their mass loss is disproportionally large compared to the Greenland ice sheet. Satellite altimetry from Ice, Cloud, and land Elevation Satellite (ICESat) and ICESat-2 shows that mass loss from Greenland's peripheral glaciers increased from 27.2 ± 6.2 Gt/yr (February 2003–October 2009) to 42.3 ± 6.2 Gt/yr (October 2018–December 2021). These relatively small glaciers now constitute 11 ± 2% of Greenland's ice loss and contribute to global sea level rise. In the period October 2018–December 2021, mass loss increased by a factor of four for peripheral glaciers in North Greenland. While peripheral glacier mass loss is widespread, we also observe a complex regional pattern where increases in precipitation at high altitudes have partially counteracted increases in melt at low altitude.

Greenland↗

The Beauty and Complexity of the Brunt Ice Shelf from MOA and ICESat

Beginning in February 2003, NASA's Ice, Cloud, and land Elevation Satellite (ICESat) has determined surface elevations from approx. 86degN to 86degS latitude. To date, altimetry data have been acquired in a series of observation periods in repeated track patterns using all three Geoscience Laser Altimeter System (GLAS) lasers. This paper will focus on ice shelf elevation data that were obtained in 2003 across the Brunt Ice Shelf and the Stancomb-Wills Ice Tongue. Integrating the altimetry with the recently available MODIS Mosaic of Antarctica (MOA), quantifies the relative accuracy and precision of the resulting ice shelf elevations. Furthermore, the elevation data was processed onto an elevation grid, by regional interpolation across the area s complex glacial features only. Ice thickness estimation from the altimetry of the floating ice is discussed. ICESat operates at 40Hz and its elevation data is obtained every 172m along track. These elevations have a relative accuracy of about 14cm based on the standard deviation of low-slope crossover differences and a precision of close to 2cm for the Laser 2a, Release 21, GLA12 data used here.

Humbert, Angelika↗

An Investigation of the Correlation of Water-Ice and Dust Retrievals Via the MGS TES Data Set

Water-ice in the Martian atmosphere was first identified in the Mariner 9 Infrared Interferometer Spectrometer (IRIS) spectra. The Viking Imaging Subsystem (VIS) instruments aboard the Viking orbiter also observed water-ice clouds and hazes in the Martian atmosphere. The MGS TES instrument is an infrared inferometer/spectrometer which covers the spectral range 6-50 micron with a selectable sampling resolution of either 5 or 10 per cm. Using the relatively independent and distinct spectral signatures for dust and water-ice, these two retrieved quantities have been retrieved simultaneously. Although the interrelations among the two quantities have been analyzed by Smith et al. and the retrievals are thought to be robust, understanding the impact of each quantity on the other during their retrievals as well as the impact from the surface for retrievals is important for correctly interpreting the science, and therefore requires close examination. An understanding of the correlation or a-correlation between dust and water-ice would aid in understanding the physical processes responsible for the transport of aerosols in the Martian atmosphere. In this presentation, we present an investigation of the correlation between water-ice and dust in the MGS TES data set.

Qu, Z.↗

Denitrification of the polar winter stratosphere - Implications of SAM II cloud formation temperatures

The SAM II extinction profiles and the associated temperature profiles are used to determine the amount of denitrification of the winter polar stratospheres. Clear evidence of the denitrification process in the Antarctic data is seen. There are indications in the Arctic data that denitrification mechanisms may be at work there also. At the latitudes observed by the SAM II satellite system, denitrification begins before the formation of extensive ice clouds and may be due to sedimentation of nitric acid particles. However, the possibility of dinitrification by type II PSCs at latitudes not observed by SAM II cannot be excluded.

Hamill, Patrick↗

Top-of-Atmosphere Albedo Estimation from Angular Distribution Models using Scene Identification from Satellite Cloud Property Retrievals

The next generation of Earth radiation budget satellite instruments will routinely merge estimates of global top-of-atmosphere radiative fluxes with cloud properties. This information will offer many new opportunities for validating radiative transfer models and cloud parameterizations in climate models. In this study, five months of POLarization and Directionality of the Earth's Reflectances (POLDER) 670 nm radiance measurements are considered in order to examine how satellite cloud property retrievals can be used to define empirical Angular Distribution Models (ADMs) for estimating top-of-atmosphere (TOA) albedo. ADMs are defined for 19 scene types defined by satellite retrievals of cloud fraction and cloud optical depth. Two approaches are used to define the ADM scene types: The first assumes there are no biases in the retrieved cloud properties and defines ADMs for fixed discrete intervals of cloud fraction and cloud optical depth (fixed-tau approach). The second approach involves the same cloud fraction intervals, but uses percentile intervals of cloud optical depth instead (percentile-tau approach). Albedos generated using these methods are compared with albedos inferred directly from the mean observed reflectance field. Albedos based on ADMs that assume cloud properties are unbiased (fixed-tau approach) show a strong systematic dependence on viewing geometry. This dependence becomes more pronounced with increasing solar zenith angle, reaching approximately equals 12% (relative) between near-nadir and oblique viewing zenith angles for solar zenith angles between 60 deg and 70 deg. The cause for this bias is shown to be due to biases in the cloud optical depth retrievals. In contrast, albedos based on ADMs built using percentile intervals of cloud optical depth (percentile-tau approach) show very little viewing zenith angle dependence and are in good agreement with albedos obtained by direct integration of the mean observed reflectance field (less than 1% relative error). When the ADMs are applied separately to populations consisting of only liquid water and ice clouds, significant biases in albedo with viewing geometry are observed (particularly at low sun elevations), highlighting the need to account for cloud phase both in cloud optical depth retrievals and in defining ADM scene types. ADM-derived monthly mean albedos determined for all 5 deg x 5 deg latitude/longitude regions over ocean are in good agreement (regional RMS relative errors less than 2%) with those obtained by direct integration when ADM albedos inferred from specific angular bins are averaged together. Albedos inferred from near-nadir and oblique viewing zenith angles are the least accurate, with regional RMS errors reaching approximately 5-10% (relative). Compared to an earlier study involving ERBE ADMs, regional mean albedos based on the 19 scene types considered here show a factor of 4 reduction in bias error and a factor of 3 reduction in RMS error.

Loeb, N. G.↗

Predicting Accumulations of Ice on Aerodynamic Surfaces

LEWICE is a computer program that predicts the accumulation of ice on two-dimensional aerodynamic surfaces under conditions representative of the flight of an aircraft through an icing cloud. The software first calculates the airflow surrounding the body of interest, then uses the airflow to compute the trajectories of water droplets that impinge on the surface of the body. The droplet trajectories are also used to compute impingement limits and local collection efficiencies, which are used in subsequent ice-growth calculations and are also useful for designing systems to protect against icing. Next, the software predicts the shape of accumulating ice by modeling transfers of mass and energy in small control volumes. The foregoing computations are repeated over several computational time steps until the total icing exposure time is reached. Results of computations by LEWICE have been compared with an extensive database of measured ice shapes obtained from experiments, and have been shown to closely approximate those shapes under most conditions of interest to the aviation community.

Bidwell, Colin↗

Consequences of a past encounter of the earth with an interstellar cloud

In its motion through the Galaxy the sun may have suffered a number of encounters with dense interstellar clouds for which the number density of molecular hydrogen is in excess of 1000 per cu cm. Several authors have shown that this is sufficient density to stop the solar wind inside earth's orbit. Earth's atmosphere would be subjected to an interstellar H2 flux of more than 7 billion per sq cm/sec for periods of the order of 100,000 years. Simple scaling arguments are used to examine several consequences for earth's atmosphere: (1) the ionospheric F region would largely disappear; (2) the water-vapor content of the middle atmosphere would be greatly enhanced, reducing the mesospheric ozone concentrations and thereby lowering the average temperature and altitude of the mesopause; (3) as a result of (2), widespread mesospheric ice clouds would occur, increasing the planetary albedo; and (4) the resultant radiative cooling at the surface may have been sufficient to 'trigger' an ice age.

Mckay, C. P.↗