Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “clamp”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Application of the TRPLT1 element to large amplitude free vibrations of plates

A finite element formulation is developed for analyzing large amplitude free flexural vibrations of thin plates in NASTRAN. Stress distributions in the plate, in addition to deflection shapes and nonlinear frequencies are determined. Linearized equations of motion governing large amplitude oscillations of plates and a linearized geometrical stiffness matrix are presented. The solution procedure and convergence characteristics are discussed. The quasi-linear geometrical stiffness matrix for an eighteen degree-of-freedom higher order triangular plate element is evaluated by using a seven-point numerical integration. Nonlinear frequencies for square, rectangular, rhombic, and isosceles triangular plates, with edges simply supported or clamped, are compared with earlier solutions. The present formulation is found to give results entirely adequate for engineering purposes.

Mei, C.↗
NASA NTRS1977

Experimental transient and permanent deformation studies of steel-sphere-impacted or explosively-impulsed aluminum panels

The sheet explosive loading technique (SELT) was employed to obtain elastic-plastic, large deflection 3-d transient and/or permanent strain data on simple well defined structural specimens and materials: initially-flat 6061-T651 aluminum panels with all four sides ideally clamped via integral construction. The SELT loading technique was chosen since it is both convenient and provides "forcing function information" of small uncertainty. These data will be useful for evaluating pertinent 3-d structural response prediction methods.

Witmer, E. A.↗
NASA NTRS1978

Spacesuit torso closure

A simple, economical and reliable entry closure is described for joining opposite halves of a torso section for a pressure suit in a manner which simplifies self-donning. A single coupling joins coaxially aligned, axially separable, tubular segments of a hard spacesuit along an angulated zone of separation, adapted to be mated in an hermetrically sealing relation. A releasable C section clamp secures the members in their mated relationship.

Webbon, B. W.↗
NASA NTRS1978

A research program to reduce interior noise in general aviation airplanes: Investigation of the characteristics of an acoustic panel test facility

Sound pressure levels in the test facility were studied that are caused by varying: (1) microphone positions; (2) equalizer setting; and (3) panel clamping forces. Measurements were done by using a Beranek tube or this Beranek tube in combinations with an extension tube and a special test section. In all configurations tests were executed with and without a test panel installed. The influence of the speaker back panel and the back panel of the Beranek tube on the sound pressure levels inside the test tube were also investigated. It is shown that the definition of noise reduction is more useful in relation to this test facility than transmission loss.

Grosveld, F.↗
NASA NTRS1978

Operations of the ATS-6 ion engine and plasma bridge neutralizer at geosynchronous altitude

The ion engine on ATS-6 has been operated in daylight and eclipse. The effect on particle fluxes to the spacecraft was monitored. This data provides information on the potential of the spacecraft with respect to the ambient plasma and the local electric fields caused by the charge distribution on the spacecraft. Operation of the ion engine and/or the neutralizer clamps the spacecraft within a few volts of the ambient plasma potential. Operation of only the neutralizer tends to reduce the differential charge on the satellite, whereas operation of the ion engine reduces it below the sensitivity limit of the detectors.

Olsen, R. C.↗
NASA NTRS1979

Rubber valve seal with tough skin

Curing technique for producing variable viscosity seal has hard sealing surface supported by softer rubber. Valve seal is clamped between two jaws for curing with hotter jaw at temperature of approximately 350 F and lower at room temperature. Result is durable tight valve-seat.

Martin, J. W.↗
NASA NTRS1979

Removable fastener for large structures

Frame clamps lateral braces for assembling trusses, scaffolds, and other structures. Although approach originally proposed for assembling antennas and solar arrays in space, method is useful in temporary structures which require fastening before they are permanently welded or bonded.

Thulson, M. D.↗
NASA NTRS1980

Resonant-fatigue cracking apparatus

Apparatus produces controlled surface cracks in test specimens. It has been developed and is useful in production of surface cracks of controlled size and shape in fracture specimens. It consists of specially-designed stand-mounted clamping fixture, commercially available pneumatic actuator, and suitable sound-control mufflers.

Dorner, J. P.↗
NASA NTRS1980

Tube-shape verifier

Inexpensive apparatus checks accuracy of bent tubes. Assortment of slotted angles and clamps is bolted down to flat aluminum plate outlining shape of standard tube bent to desired configuration. Newly bent tubes are then checked against this outline. Because parts are bolted down, tubes can be checked very rapidly without disturbing outline. One verifier per tube-bending machine can really speed up production in tube-bending shop.

Anderson, A. N.↗
NASA NTRS1978

Positive isolation disconnect

A disconnect composed basically of two halves each consisting of a poppet valve operable to isolate fluid with essentially zero fluid loss is presented. The two halves are coupled together by a quickly releasable coupling which may be either a coupling ring tightened or loosened by a twisting motion, or a clamp operated by a pivoted to prevent disconnecting the two halves until both valves are in closed condition. The positive feature of the device is one requiring a valve closing step before a disconnect step, and takes structural form in an accentric lobe mounted on the valve operating stem. If some obstruction prevents the poppet from moving to its seat, the eccentric lobe cannot be rotated to the closed position, and the interlock prevents a disconnect.

Friedell, M. V.↗
NASA NTRS1978

Length mode piezoelectric ultrasonic transducer for inspection of solid objects

The transducer is constructed from individual transducer elements arranged in an array and configured to exhibit a predominant, longitudinal mode transversely to the array. The elements are interconnected through thin flexible sheets. Each element is individually damped, and the transducer as a whole is electrically damped through resonance with the clamped capacitance and dissipation. Electrical control permits inphase operation of all transducer elements or control with preselected phase differences.

Thompson, R. B.↗
NASA NTRS1978

User's guide to computer programs JET 5A and CIVM-JET 5B to calculate the large elastic-plastic dynamically-induced deformations of multilayer partial and/or complete structural rings

These structural ring deflections lie essentially in one plane and, hence, are called two-dimensional (2-d). The structural rings may be complete or partial; the former may be regarded as representing a fragment containment ring while the latter may be viewed as a 2-d fragment-deflector structure. These two types of rings may be either free or supported in various ways (pinned-fixed, locally clamped, elastic-foundation supported, mounting-bracket supported, etc.). The initial geometry of each ring may be circular or arbitrarily curved; uniform-thickness or variable-thickness rings may be analyzed. Strain-hardening and strain-rate effects of initially-isotropic material are taken into account. An approximate analysis utilizing kinetic energy and momentum conservation relations is used to predict the after-impact velocities of each fragment and of the impact-affected region of the ring; this procedure is termed the collision-imparted velocity method (CIVM) and is used in the CIVM-JET 5 B program. This imparted-velocity information is used in conjunction with a finite-element structural response computation code to predict the transient, large-deflection, elastic-plastic responses of the ring. Similarly, the equations of motion of each fragment are solved in small steps in time. Provisions are made in the CIVM-JET 5B code to analyze structural ring response to impact attack by from 1 to 3 fragments, each with its own size, mass, translational velocity components, and rotational velocity. The effects of friction between each fragment and the impacted ring are included.

Wu, R. W. H.↗
NASA NTRS1979

Heliostat for astronomical usage

The design of a heliostat is presented. The invention consists of a mechanical polar axis which can rotate and which is parallel to the world axis. A mirror is supported in such a way that it can be rotated arbitrarily around a declination axis which is perpendicular to it. After execution of this rotation, the mirror can be clamped in the plane of the world axis, which can be corrected and verified by special collimation directions. The clockwork or drive unit can be driven for a 24 or 48 hour complete rotation of the axis using any known device such as switchable gears, without changing its regular variation related to stellar time or mean solar time.

Heyde, G.↗
NASA NTRS1978

Effects of debonds on the strength of composite plates

The effect of debonds on composite structures under compressive loads is investigated in this paper. Because of the inclusion of debonds, unsymmetric laminated rectangular plates are considered. The resulting bending-extension coupling is included and is shown to be quite significant for thin laminates typical of debonded regions. The solution technique is based on the Theorem of Minimum Potential Energy; and both simply supported and clamped boundaries are considered. The need to include transverse shear deformation in the analysis is documented. Also, the range of applicability of the reduced stiffness matrix technique for such plates is stated. The consideration of non-rectangular boundaries, as would normally occur for debonded regions, has been included through a finite element study. Using the results of this study, an effective laminated plate theory for irregularly shaped debonded regions is proposed.

Daugherty, R. L.↗
NASA NTRS1979

Mass Driver Two - Cryogenic module

The cryogenic module of Mass Driver Two comprises a 3.25 inch (82.55 mm) OD bucket with two 44 kilo-ampere-turn coils made with .028 inch (.71 mm) diam niobium-titanium multi-filamentary cable in a copper matrix, impregnated with lead alloy for thermal inertia, as well as the service station to refrigerate, energize and eject the bucket. The station is housed in a six inch flanged pyrex cross which connects to the four inch pyrex tube of the mass driver itself. The bucket is refrigerated by being forced against a copper braid cradle attached to the bottom of a liquid helium reservoir which protrudes into the cross from above. The bucket is energized inductively by turning off two superconducting coils which are also attached to the helium reservoir, and which have maintained the correct flux linkage through the bucket coils during their cool-down through the critical temperature. Once charging is completed, the clamping pressure is released and the bucket is injected into the mass driver by means of two normal-conductor pulse coils surrounding the horizontal branches of the cross.

Fine, K.↗
NASA NTRS1978

Effect of geometric nonlinearity on the free flexural vibrations of moderately thick rectangular plates

The effect of geometric nonlinearity on the free flexural vibrations of moderately thick rectangular plates is studied in this paper. Finite element formulation is employed to obtain the non-linear to linear period ratios for some rectangular plates. A conforming finite element of rectangular shape wherein the effects of shear deformation and rotatory inertia are included, is developed and used for the analysis. Results are presented for both simply supported and clamped boundary conditions.

Raju, K. K.↗
NASA NTRS1980

Tubing cutter for tight spaces

Cutter requires few short swings of handle to rotate its cutting edge full 360 around tube. It will cut tubing installed in confined space that prevents free movement of conventional cutter. Cutter is snapped onto tube and held in place by spring-loaded clamp. Screw ratchet advances cutting wheel.

Girala, A. S.↗
NASA NTRS1980

Better-quality CCD-array images

In quadruple sampling, signal from each element in array is sampled once before element is clamped on, twice during "on" period, once again after element is turned off. Quadruple-sampling scheme increases overall signal-to-noise by about 40 percent above level for double sampling, prediction verified by measurements on star-tracking imager.

Gaalema, S. D.↗