Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “bragg diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Photoinduced evolution of lattice orthorhombicity and conceivably enhanced ferromagnetism in LaMnO 3 membranes

Ultrashort laser pulses have been utilized to dynamically drive phase transitions in correlated quantum materials. Of particular interest is whether phases not achievable in thermal equilibrium can be induced in complex oxides with intricately coupled lattice, electron and spin degrees of freedom. Here, we tracked atomic motions in LaMnO 3 following photoexcitation with MeV ultrafast electron diffraction (MeV-UED) technique. We found that the light excited state exhibits numerous signatures different from thermal equilibrium ones, including nearly conserved Bragg intensities, strongly suppressed La cation and oxygen anion displacements, and the long-range lattice orthorhombicity evolution. Furthermore, using first-principles calculations, we predict that the ferromagnetic ordering and conductivity are both enhanced upon laser excitation due to the reduction of the lattice orthorhombicity. This work benefits from recent advance in fabrication of membrane films with high epitaxial quality and in MeV-UED with large momentum space access and high temporal resolution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Protein crystal structure from non-oriented, single-axis sparse X-ray data

X-ray free-electron lasers (XFELs) have inspired the development of serial femtosecond crystallography (SFX) as a method to solve the structure of proteins. SFX datasets are collected from a sequence of protein microcrystals injected across ultrashort X-ray pulses. The idea behind SFX is that diffraction from the intense, ultrashort X-ray pulses leaves the crystal before the crystal is obliterated by the effects of the X-ray pulse. The success of SFX at XFELs has catalyzed interest in analogous experiments at synchrotron-radiation (SR) sources, where data are collected from many small crystals and the ultrashort pulses are replaced by exposure times that are kept short enough to avoid significant crystal damage. The diffraction signal from each short exposure is so `sparse' in recorded photons that the process of recording the crystal intensity is itself a reconstruction problem. Using the EMC algorithm, a successful reconstruction is demonstrated here in a sparsity regime where there are no Bragg peaks that conventionally would serve to determine the orientation of the crystal in each exposure. In this proof-of-principle experiment, a hen egg-white lysozyme (HEWL) crystal rotating about a single axis was illuminated by an X-ray beam from an X-ray generator to simulate the diffraction patterns of microcrystals from synchrotron radiation. Millions of these sparse frames, typically containing only ~200 photons per frame, were recorded using a fast-framing detector. It is shown that reconstruction of three-dimensional diffraction intensity is possible using the EMC algorithm, even with these extremely sparse frames and without knowledge of the rotation angle. Further, the reconstructed intensity can be phased and refined to solve the protein structure using traditional crystallographic software. In conclusion, this suggests that synchrotron-based serial crystallography of micrometre-sized crystals can be practical with the aid of the EMC algorithm even in cases where the data are sparse.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Coherent X-ray Radiation Excited by a Beam of Relativistic Electrons in a Single Crystal in the Direction of Beam Axis

In the framework of the two-wave approximation of the dynamic diffraction theory, a theory of coherent X-ray radiation of a relativistic electron beam in a single crystal in the direction close to the direction of the beam axis in the Bragg scattering geometry is developed for the general case of asymmetric reflection of the electron field relative to the target surface. Expressions describing the spectral-angular characteristics of parametric X-ray radiation near the velocity direction, transition radiation, and their interference term are obtained and studied.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improving signal strength in serial crystallography with DIALS geometry refinement

The DIALS diffraction-modeling software package has been applied to serial crystallography data. Diffraction modeling is an exercise in determining the experimental parameters, such as incident beam wavelength, crystal unit cell and orientation, and detector geometry, that are most consistent with the observed positions of Bragg spots. These parameters can be refined by nonlinear least-squares fitting. In previous work, it has been challenging to refine both the positions of the sensors (metrology) on multipanel imaging detectors such as the CSPAD and the orientations of all of the crystals studied. Since the optimal models for metrology and crystal orientation are interdependent, alternate cycles of panel refinement and crystal refinement have been required. To simplify the process, a sparse linear algebra technique for solving the normal equations was implemented, allowing the detector panels to be refined simultaneously against the diffraction from thousands of crystals with excellent computational performance. Separately, it is shown how to refine the metrology of a second CSPAD detector, positioned at a distance of 2.5 m from the crystal, used for recording low-angle reflections. With the ability to jointly refine the detector position against the ensemble of all crystals used for structure determination, it is shown that ensemble refinement greatly reduces the apparent nonisomorphism that is often observed in the unit-cell distributions from still-shot serial crystallography. In addition, it is shown that batching the images by timestamp and re-refining the detector position can realistically model small, time-dependent variations in detector position relative to the sample, and thereby improve the integrated structure-factor intensity signal and heavy-atom anomalous peak heights.

36 MATERIALS SCIENCE↗

Charge density waves and pinning by lattice anisotropy in 214 cuprates

The detection of static charge density waves (CDWs) in La 2-x ⁢Sr x ⁢CuO 4 (LSCO) with x ~ 0.12 at relatively high temperatures has raised the question of what lattice feature pins the CDWs. Some recent structural studies have concluded that some form of monoclinic distortion, indicated by the appearance of certain weak Bragg peaks (type M peaks) at otherwise forbidden positions, are responsible for CDW pinning. Here, as a test of this idea, we present neutron diffraction results for a single crystal of La 2-x ⁢Ba x CuO 4 (LBCO) with x = 1/8, which is known to undergo two structural transitions on cooling, from high-temperature tetragonal (HTT) to low-temperature orthorhombic (LTO) near 240 K, involving a collective tilt pattern of the corner-sharing CuO 6 octahedra, and from LTO to low-temperature tetragonal (LTT) near 56 K, involving a new tilt pattern and the appearance of intensity at peaks of type T. We observe both type M and type T peaks in the LTT phase, while the type M peaks (but not type T) are still present in the LTO phase. Given that CDW order is observed only in the LTT phase of LBCO, it is apparent that the in-plane Cu-O bond anisotropy associated with the octahedral tilt pattern is responsible for charge pinning. We point out that evidence for a similar, but weaker, bond anisotropy has been observed previously in LSCO and should be responsible for CDW pinning there. In the case of LBCO, the monoclinic distortion may help to explain previously reported magneto-optical evidence for gyrotropic order.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of interstitial Mn on magnetism in the room-temperature ferromagnet Mn 1 + δ Sb

We report elastic and inelastic neutron scattering measurements of the high-TC ferromagnet Mn 1 + δ Sb . Measurements were performed on a large, T C = 434 K, single crystal with interstitial Mn content of δ ≈ 0.13. The neutron diffraction results reveal that the interstitial Mn has a magnetic moment, and that it is aligned antiparallel to the main Mn moment. We perform density functional theory calculations including the interstitial Mn, and find the interstitial to be magnetic in agreement with the diffraction data. The inelastic neutron scattering measurements reveal two features in the magnetic dynamics: i) a spin-wave-like dispersion emanating from ferromagnetic Bragg positions (H K 2n), and ii) a broad, non-dispersive signal centered at forbidden Bragg positions (H K 2n+1). The inelastic spectrum cannot be modeled by simple linear spin-wave theory calculations, and appears to be significantly altered by the presence of the interstitial Mn ions. Finally, the results show that the influence of the interstitial Mn on the magnetic state in this system is more important than previously understood.

36 MATERIALS SCIENCE↗

Simplex‐based model for nanoparticle grain identification in four‐dimensional scanning transmission electron microscopy data

Grain identification in polycrystalline nanoparticles, for example, determining which crystal phases are present at each spatial location, is fundamental to materials characterisation. This is particularly challenging when grains overlap extensively, as commonly occurs in four-dimensional scanning transmission electron microscopy (4D-STEM) datasets. We propose a simplex-based model (SBM) in which each simplex vertex represents the diffraction pattern (DP) of a pure grain, and the simplex edges and interior represent overlapping grains. Our SBM grain identification algorithm operates on the Bragg disk (BD) data matrix distilled from the 4D-STEM data to identify the grain membership at each scan position, together with a BD feature matrix whose columns represent the DPs for each constituent grain, which is important for identifying the crystal structure of each grain. We solve the model using a two-stage algorithm. In Stage 1, we adapt a linear mixing algorithm to estimate an initial BD feature matrix whose columns represent DPs of potentially overlapping grains. Our Stage 2 algorithm incorporates sparsity considerations to transform the initial BD feature matrix so that its columns represent DPs of pure grains. Using simulated datasets with various grain configurations, we demonstrate that SBM recovers both the BD feature matrix and membership maps more accurately than existing methods, even when a grain lacks any pure region and completely overlaps with other grains.

4D-STEM segmentation↗

Pressure-induced transformations of multiferroic relaxor PbFe 0.5 Nb 0.5 O 3

The effects of hydrostatic pressure at ambient temperature on the structural and dielectric properties of PbFe 0.5 Nb 0.5 O 3 (PFN) were investigated using second harmonic generation (SHG) and powder x-ray diffraction measurements to 31 GPa. The results demonstrate that PFN undergoes a pressure-induced structural transition from the R3$m$ ferroelectric to the $R$$\bar{3}m$ paraelectric phase. SHG measurements showed a continuous decrease in the signal with pressure and complete disappearance at 7.1 GPa. Effective nonlinear optical coefficients were determined from the SHG data, and their pressure behavior was used to infer the nature of the transition. The loss of the SHG signal is accompanied by drastic changes in line widths of Bragg reflections, but no discontinuous change in volume was observed. The pressure-volume data were fit to various equations of state, and a bulk modulus $K_0$ = 136 (±2) GPa, bulk modulus pressure derivative $K_0$ ' = 4.0 (±0.2), and initial volume $V_0$ = 64.5 (±0.1) Å 3 were obtained.

36 MATERIALS SCIENCE↗

Properties of boron-doped thin films of polycrystalline silicon

The properties of polycrystalline-silicon films deposited by low pressure chemical vapor deposition and doped heavily in situ boron-doped with concentration level of around 2×10{sup 20}cm{sup −3} has been studied. Their properties are analyzed using electrical and structural characterization means by four points probe resistivity measurements and X-ray diffraction spectra. The thermal-oxidation process are performed on sub-micron layers of 200nm/c-Si and 200nm/SiO{sub 2} deposited at temperatures T{sub d} ranged between 520°C and 605°C and thermally-oxidized in dry oxygen ambient at 945°C. Compared to the as-grown resistivity with silicon wafers is known to be in the following sequence <ρ{sub 200nm/c−Si}> < <ρ{sub 200nm/SiO2}> and <ρ{sub 520}> < <ρ{sub 605}>. The measure X-ray spectra is shown, that the Bragg peaks are marked according to the crystal orientation in the film deposited on bare substrates (poly/c-Si), for the second series of films deposited on bare oxidized substrates (poly/SiO{sub 2}) are clearly different.

36 MATERIALS SCIENCE↗

Magnetic structure of triangular lattice compound Tb2Ni0.90Si2.94

AlB 2 -type ternary intermetallic compound Tb 2 Ni 0.90 Si 2.94 (space group P 6=mmm, hP 3, No. 191) was reported to exhibit spin freezing behaviour of the ferromagnetic clusters present in the system below T f = 9:9 K, along with the presence of spatially limited antiferromagnetic phase. In this work, on the basis of variable temperature zero-field neutron diffraction measurements, we have shown that the antiferromagnetic phase transition occurs for the compound below T N ~13 K. Neutron diffraction study indicates ab-plane non-collinear sine-modulated antiferromagnetic ordering of the system with wave vectors of k 1 = [±1/6, ±1/6, 0] and k 2 = [±1/3, ±1/3, 0] down to 1.7 K. The weak and diffuse nature of the magnetic Bragg peaks along with limited coherence length further confirm the short-range nature of the antiferromagnetic phase in this compound.

36 MATERIALS SCIENCE↗

Improvements in the Sample Space for the Backscattering Silicon Spectrometer (BASIS)

The increase in neutron flux at the Oak Ridge National Laboratory (ORNL) Spallation Neutron Source (SNS), currently operating at 2.0 MW proton beam power, has created new opportunities for higher-throughput neutron scattering experiments while also increasing the importance of minimizing background scattering and optimizing sample-environment operations. To address these challenges on the Backscattering Silicon Spectrometer (BA-SIS), several upgrades were developed and evaluated, including boron carbide (B₄C) masking for flat-plate sample containers, multi-cell sample holders used with a vertically translating sample stick, and an automated helium pump and purge (HPP) system for closed-cycle refrigerators. Neutron diffraction measurements demonstrate that B₄C masks reduce background scattering by 49–67%, outperforming both borated aluminum and boron nitride masks while introducing no additional Bragg reflections within the instrument’s accessible Q-range. Commissioning tests of a double-cell flat-plate sample contain-er showed no measurable crosstalk between adjacent sample compartments and con-firmed stable thermal performance, enabling multiple samples to be measured without re-peated temperature cycling. In addition, the automated HPP system provided reproducible sample-space gas handling with approximately ±1 mbar precision while reducing the need for operator intervention and supporting remote operation. Together, these developments improve signal-to-noise performance, increase experimental throughput, and enhance operational efficiency at BASIS, supporting the instrument’s continued operation under higher neutron flux conditions.

Jalarvo, Niina [ORNL] (ORCID:0000000306446866)↗

On a measurement approach to support evaluation of thermal scattering law data

Inelastic thermal neutron scattering in materials that act as neutron moderators, reflectors, and filters results in shaping the neutron spectrum at low energies. This phenomenon is described using differential scattering cross sections calculated from three components including the bound atom (i.e., nuclear) scattering cross section of the neutron, the ratio of the outgoing and incoming neutron energy, and the thermal scattering law (TSL), i.e., S(α,β), where α and β represent dimensionless momentum and energy exchange variables, respectively. To date, no TSL libraries are generated using measured data. However, valuable information may be derived from measurements and “targeted” experiments that can validate TSL data and the related inelastic scattering cross sections. As a demonstration, a suite of coordinated measurements and experiments is described that was designed and used to support the evaluation of the TSL for “nuclear” graphite. This experimental suite includes neutron powder diffraction (for structure analysis), positron annihilation (for nano porosity assessment), inelastic neutron scattering measurements using a chopper spectrometer, transmission experiments using neutrons with energy below the Bragg cutoff thereby accessing the total (inelastic) cross section, and a slowing-downtime experiment to observe the developing neutron spectrum in the material. We find that this experimental suite was key to understanding the difference in TSL between “nuclear” and “ideal” graphite and for the inclusion of “nuclear” graphite in the ENDF/B-VIII.0 nuclear data library release.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Optical Bragg, atomic Bragg and cavity QED detections of quantum phases and excitation spectra of ultracold atoms in bipartite and frustrated optical lattices

Ultracold atoms loaded on optical lattices can provide unprecedented experimental systems for the quantum simulations and manipulations of many quantum phases and quantum phase transitions between these phases. However, so far, how to detect these quantum phases and phase transitions effectively remains an outstanding challenge. In this paper, we will develop a systematic and unified theory of using the optical Bragg scattering, atomic Bragg scattering or cavity QED to detect the ground state and the excitation spectrum of many quantum phases of interacting bosons loaded in bipartite and frustrated optical lattices. The physically measurable quantities of the three experiments are the light scattering cross sections, the atom scattered clouds and the cavity leaking photons respectively. We show that the two photon Raman transition processes in the three detection methods not only couple to the density order parameter, but also the valence bond order parameter due to the hopping of the bosons on the lattice. This valence bond order coupling is very sensitive to any superfluid order or any valence bond (VB) order in the quantum phases to be probed. These quantum phases include not only the well-known superfluid and Mott insulating phases, but also other important phases such as various kinds of charge density waves (CDW), valence bond solids (VBS), and CDW-VBS phases with both CDW and VBS orders unique to frustrated lattices, and also various kinds of supersolids. We analyze respectively the experimental conditions of the three detection methods to probe these various quantum phases and their corresponding excitation spectra. We also address the effects of a finite temperature and a harmonic trap. We contrast the three scattering methods with recent in situ measurements inside a harmonic trap and argue that the two kinds of measurements are complementary to each other. The combination of both kinds of detection methods could be used to match the combination of Scanning tunneling microscopy (STM), the Angle Resolved Photo Emission spectroscopy (ARPES) and neutron scattering in condensed matter systems, therefore achieve the putative goals of quantum simulations - Highlights: Black-Right-Pointing-Pointer Develop a systematic and unified theory of various scattering experiments. Black-Right-Pointing-Pointer Discuss the optical Bragg, atomic Bragg and cavity QED detection methods. Black-Right-Pointing-Pointer Explore the detections of various quantum phases in various kinds of optical lattices. Black-Right-Pointing-Pointer Present the detections of valence bond order and the supersolid order. Black-Right-Pointing-Pointer Contrast the scattering methods with the in situ measurement.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal expansion of LaB 6 from 298 to 998 K

We propose LaB 6 as a temperature calibration standard for high-temperature (HT) X-ray diffractometry owing to its high temperature stability. Such HT applications require a reliable HT lattice parameter or, equivalently, peak position data, which have not been readily accessible to the diffraction community to date. As such, the thermal expansion behavior of NIST SRM 660a LaB6 was assessed in the temperature range 298–998 K using HT Bragg–Brentano parafocusing θ:θ X-ray diffractometry in conjunction with Rietveld analysis. Data were collected in the 2θ range 20–150° at a data collection rate of 0.5° θ min −1 in air and at 1 atm. The temperature was stepped in 50 K increments. The cubic unit-cell lattice parameter [a(T)] of LaB 6 in Å was found to vary as a(T) = 4.15678 (±0.00001) + Ξ(T − 298 K) + Ψ(T − 298 K) 2 , where Ξ = 2.4645 × 10 −5 (±4.8904 × 10 −8 ) Å K −1 and Ψ = 1.0325 × 10 −8 (±6.7376 × 10 −11 ) Å K −1 . The isobaric volume thermal expansion coefficient (TEC) was obtained as α V P = (5.9291 × 10 −6 ) + (4.9680 × 10 −9 )(T − 298 K) K −1 , from which the corresponding linear TEC was obtained as α L P = (1.9764 × 10 −6 ) + (1.6560 × 10 −9 )(T − 298 K) K −1 . The 3 × 3 matrix representations of the single-crystal isobaric linear TEC and the volume expansivity were obtained for the cubic crystal class to which LaB 6 belongs. Also, the temperature dependence of the lattice parameter data of this study was compared with past landmark studies on LaB 6 by Dutchak et al. [Inorg. Mater. (1972), 8, 1877–1880] and Aivazov et al. [Inorg. Mater. (1979), 15, 1015–1016].

LaB6 standard material↗

Orientational Disorder of NH3 in Hexammine Magnesium Borohydride

Hexammine magnesium borohydride, Mg(NH3)6(BH4)2, consists of adducted NH3 molecules locked in a matrix of Mg cations and borohydride anions. It is a candidate material for hydrogen storage, with 16.8 wt % hydrogen stored in both the NH3 and borohydride anions. It may also be of interest as an Mg2+-conducting electrolyte in solid-state batteries. Its crystal structure has, until now, eluded a proper structural solution due to ambiguity regarding the NH3 position and behavior. In this work, we show using synchrotron X-ray diffraction that the room-temperature structure can be solved only with a model assuming the orientational disorder of ammonia molecules within the crystal structure. Cooling the sample to 120 K yields additional Bragg peaks, which can be solved only with a unit cell expansion consistent with the freezing of the orientational freedom of ammonia molecules. Using this insight from the structure solution, we performed a full assignment of the vibrational modes in the room-temperature infrared spectrum.

08 HYDROGEN↗

Applying neutron transmission physics and 3D statistical full-field model to understand 2D Bragg-edge imaging

Bragg-edge imaging, which is also known as neutron radiography, has recently emerged as a novel crystalline characterization technique. Modelling of this novel technique by incorporating various features of the underlying microstructure (including the crystallographic texture, the morphological texture, and the grain size) of the material remains a subject of considerable research and development. In this paper, Inconel 718 samples made by additive manufacturing were investigated by neutron diffraction and neutron radiography techniques. The specimen features strong morphological and crystallographic textures and a highly heterogeneous microstructure. A 3D statistical full-field model is introduced by taking details of the microstructure into account to understand the experimental neutron radiography results. The Bragg-edge imaging and the total cross section were calculated based on the neutron transmission physics. A good match was obtained between the model predictions and experimental results at different incident beam angles with respect to the sample build direction. The current theoretical approach has the ability to incorporate 3D spatially resolved microstructural heterogeneity information and shows promise in understanding the 2D neutron radiography of bulk samples. With further development to incorporate the heterogeneity in lattice strain in the model, it can be used as a powerful tool in the future to better understand the neutron radiography data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

General study on the crystal, electronic and band structures, the morphological characterization, and the magnetic properties of the Sr{sub 2}DyRuO{sub 6} complex perovskite

A comprehensive investigation of the general properties of the Sr{sub 2}DyRuO{sub 6} complex perovskite was undertaken. Crystal structure characterization performed by X-ray diffraction measurements and Rietveld analysis allowed establishing that the material crystallizes in a distorted monoclinic perovskite-like structure belonging to the P2{sub 1}/n (#14) space group, with alternating distribution of Dy{sup 3} {sup +} (2c: 0, 0.5, 0) and Ru{sup 5} {sup +} (2d: 0.5, 0, 0). Because of the mismatch in the ionic radii, the DyO{sub 6} and RuO{sub 6} octahedra are forced to tilt around the cubic directions so as to optimize the Sr–O inter-atomic bond lengths. Morphological characterization carried out by scanning electron microscopy indicated a particle size D = 37.17 nm and an activation energy Q = 109.8 kJ/mol. Semi-quantitative compositional study, performed through energy-dispersive X-ray experiments, corroborated that the pure phase of the Sr{sub 2}DyRuO{sub 6} was correctly obtained. Magnetic properties determined from the fit of the Curie–Weiss law to the curves of magnetic susceptibility as a function of temperature showed that Sr{sub 2}DyRuO{sub 6} exhibits an antiferromagnetic-like behavior at low temperatures as a consequence of a magnetic transition at T = 38 K. Data collected with respect to the field dependence of the magnetization showed the existence of a weak ferromagnetic moment relationship with antiferromagnetic-like behavior. Density functional theory allowed establishing the optimum electronic structure for Sr{sub 2}DyRuO{sub 6}, and the study of the density of states showed that Dy{sup 3} {sup +} and Ru{sup 5} {sup +} are responsible for the magnetic character of the compound, with the prediction that at T = 0 K it behaves as a half-metallic material. The spin magnetic moment of the cell is close to 16 μ{sub B}, and the integer number of Bohr magneton is a signature of half-metallic character. Evolution of crystal structure at high temperature revealed that Sr{sub 2}DyRuO{sub 6} does not undergo any structural phase transitions, since the Bragg reflections [hkl] do not undergo changes, and the structure is preserved. - Highlights: • General properties of the Sr{sub 2}DyRuO{sub 6} complex perovskite are widely discussed. • Structural description of octahedral distortions from X-ray diffraction analysis is performed. • Morphological and compositional characteristics are related with the physical properties reported. • Antiferromagnetic response is discussed form experimental results. • Theoretical calculations reveal the possible half-metallic character of material.

36 MATERIALS SCIENCE↗