Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “body composition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

Low total abundances and a predominance of n-ω-amino acids in enstatite chondrites: Implications for thermal stability of amino acids in the inner solar system

Investigating the organic contents of enstatite chondrite meteorites may offer insights into both early inner solar system and early Earth chemistry. Enstatite chondrite meteorites have highly reduced and anhydrous compositions, and their bulk isotopic compositions closely resemble terrestrial values, suggesting that their parent body asteroids accreted within the inner protoplanetary disk and were a primary contributor during Earth’s late accretion (Javoy, 1995; Piani et al., 2020). Here, we present the first report of amino acids in enstatite chondrite meteorite samples. Three EH3 meteorites were analyzed (Dominion Range [DOM] 14021, Larkman Nunatak [LAR] 12001, and Larkman Nunatak 06252). The acid-hydrolyzed water extracts of the meteorites contained low abundances (1.5–215.9 pmol per g) of n-ω-amino acids (glycine, β-alanine, γ-amino-n-butyric acid [γ- ABA], δ-amino-n-valeric acid [δ-AVA], and ϵ-amino-n-caproic acid [ϵ-ACA]), but amino acids were not present above detection limits in the nonhydrolyzed samples. The low amino acid abundances and the predominance of n-ω-amino acids resemble amino acid distributions previously observed for thermally altered chondrites. These results suggest that the parent body asteroid was not conducive to the synthesis and/or preservation of α-amino acids, or free amino acids in general, and that EH3 chondrite-like material may not have been a primary contributor of diverse or abundant free amino acids to the early Earth.

Danielle N. Simkus↗
DOE OSTI2025

Development of Innovative Non-Concentrated Alloy (NCA) Fuel Cladding for Advanced Nuclear Reactors

As the nuclear energy sector advances toward next-generation reactors, the need for high-performance fuel cladding materials has become increasingly urgent. Traditional alloys like zirconium and stainless steel are reaching their performance limits under higher temperatures, more corrosive coolants, and extended irradiation. This report presents the development of a new class of fuel cladding materials based on Non-Concentrated Alloys (NCAs) ? multi-element systems designed to deliver enhanced mechanical strength, corrosion resistance, and radiation tolerance. Through a combination of computational modeling (Computer Coupling of Phase Diagrams and Thermochemistry: CALPHAD), simulation-guided alloy selection, and experimental fabrication via arc melting and spark plasma sintering (SPS), three strategic alloy design paths were explored: (1) FeCrAl-based NCAs, (2) refractory-lean neutron-efficient alloys, and (3) equimolar high-entropy compositions. Microstructural analysis confirmed the formation of stable body-centered cubic BCC_A2 phases, while mechanical testing demonstrated hardness values significantly exceeding those of conventional cladding materials. The results highlight the tunability of NCA systems and their potential for balancing strength and ductility ? a critical consideration for in-reactor performance. Looking forward, future work will focus on thermomechanical optimization, CALPHAD refinement, and benchmarking against industry standards to enable scalable deployment. This work not only advances the science of nuclear materials but also supports broader goals in nuclear safety, performance, and nuclear energy innovation.

36 - MATERIALS SCIENCE↗
NASA NTRS1993

Central pit and dome craters - Exposing the interiors of Ganymede and Callisto

Central pit craters on Ganymede and Callisto are an unusual crater class, perhaps related to the unusual properties of water ice. The domes and pits form rapidly, on the time scale of the impact itself, rather than by long-term, post-impact intrusion or extrusion. The bright domes in pit craters are most simply explained as the uplift and exposure of relatively ice-rich material from depths of approximately 3.5 to 5 km during impact. The unusual pit morphology on icy satellites may be the result of impact into crust that is mechanically much weaker at shallow depth than on rocky bodies such as the moon. Because crater morphology is strongly dependent on ice-rock composition, the similarity of pit and dome dimensions on Ganymede and Callisto indicates that the structure and rheology of the crusts of these bodies are very similar, and have been for several billion years. Pit crater morphology indicates that the crusts of both satellites are probably ice-rich and differentiated.

Schenk, Paul M.↗
NASA NTRS1984

Composition, Structure and Evolution of Uranian and Neptunian Satellites

Large uncertainties in the current estimated densities of all of these satellites prevent detailed modeling or predictions. Nevertheless, current evidence suggests that at least Titania and Oberon might have anomalously high densities of 2-39 cm(-3), possibly requiring almost ice-free hydrated silicates or formation in a CO-rich environment, implying presence of CO-clathrate and a small ice/rock ratio. Trition and the four largest satellites of Uranus are massive enough to have undergone significant accretional heating and early differentiation; NH3-H2O volcanism; partial outgassing of CO, N2, Ch4; formation of dark surficial deposits of carbon-rich material obtained by UV irradiation of outgassed material; and, at least in the cases of Ariel and Triton, a possibility of weak ongoing icy volcanic activity. Triton may be the largest captured body in the solar system, with an unusual history and composition, including the possibility of substantial liquid or solid nitrogen obtained from either primordial NH3 photolysis or clathrate decomposition.

Stevenson, D. J.↗
NASA NTRS2024

Bulk Elemental Composition of Aggregate Material From Asteroid Bennu

On September 24, 2023, NASA’s OSIRIS-REx mission returned pristine carbonaceous material from asteroid Bennu. One key aspect required to understand this returned material is to establish its bulk chemical composition. This is primarily due to each chondrite group having a distinct elemental composition, which is important both as a classification tool and for establishing the connections between the different chondrite groups. As the carbonaceous and non-carbonaceous chondrites are thought to have formed in the inner and outer protoplanetary disk, respectively, measuring the bulk elemental composition of Bennu material will help test the mission hypothesis that “Bennu's parent body formed beyond the snow line by accretion of material in the protoplanetary disk”. In addition, two further mission hypotheses — paraphrased as Bennu’s bulk elemental composition reflects that of its parent asteroid and is similar to the composition of the Sun and Bennu’s dominant lithologies are comparable in composition to the most aqueously altered carbonaceous chondrites — can be directly tested by bulk elemental analyses. Elemental analyses were undertaken on sample OREX-803015-0, a 20.66 mg aggregate sourced from inside the sample collector. All analyses were conducted using an iCAP Q ICP-MS. Overall, all 54 elements analyzed for the Bennu aggregate sample show similar abundances to those of the average CI chondrite, and thus the solar photosphere composition and some of the most aqueously altered carbonaceous chondrites. The elemental data also show that Bennu is indeed a carbonaceous asteroid that formed beyond the snow line by accretion of material in the protoplanetary disk. This Bennu aggregate sample appears similar in elemental composition to samples of asteroid Ryugu, yet without the small refractory element enrichments seen in Ryugu.

P Koefoed↗
NASA NTRS2015

Composite Structure Modeling and Analysis of Advanced Aircraft Fuselage Concepts

NASA Environmentally Responsible Aviation (ERA) project and the Boeing Company are collabrating to advance the unitized damage arresting composite airframe technology with application to the Hybrid-Wing-Body (HWB) aircraft. The testing of a HWB fuselage section with Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) construction is presently being conducted at NASA Langley. Based on lessons learned from previous HWB structural design studies, improved finite-element models (FEM) of the HWB multi-bay and bulkhead assembly are developed to evaluate the performance of the PRSEUS construction. In order to assess the comparative weight reduction benefits of the PRSEUS technology, conventional cylindrical skin-stringer-frame models of a cylindrical and a double-bubble section fuselage concepts are developed. Stress analysis with design cabin-pressure load and scenario based case studies are conducted for design improvement in each case. Alternate analysis with stitched composite hat-stringers and C-frames are also presented, in addition to the foam-core sandwich frame and pultruded rod-stringer construction. The FEM structural stress, strain and weights are computed and compared for relative weight/strength benefit assessment. The structural analysis and specific weight comparison of these stitched composite advanced aircraft fuselage concepts demonstrated that the pressurized HWB fuselage section assembly can be structurally as efficient as the conventional cylindrical fuselage section with composite stringer-frame and PRSEUS construction, and significantly better than the conventional aluminum construction and the double-bubble section concept.

Mukhopadhyay, Vivek↗
NASA NTRS2005

Diagnostics of Carbon Nanotube Formation in a Laser Produced Plume: Spectroscopic in situ nanotube detection using spectral absorption and surface temperature measurements by black body emission

Carbon nanotubes hold great promise for material advancements in the areas of composites and electronics. The advancement of research in these areas is dependent upon the availability of carbon nanotubes to a broad spectrum of academic and industrial researchers. Although there has been much progress made in reducing the costs of carbon nanotubes and increasing the quality and purity of the products, an increase in demand for still less expensive and specific nanotubes types has also grown. This summer's work has involved two experiments that have been designed to further the understanding of the dynamics and chemical mechanisms of carbon nanotube formation. It is expected that a better understanding of the process of formation of nanotubes will aid current production designs and stimulate ideas for future production designs increasing the quantity, quality, and production control of carbon nanotubes. The first experiment involved the measurement of surface temperature of the target as a function of time with respect to the ablation lasers. A peak surface temperature of 5000 K was determined from spectral analysis of black body emission from the target surface. The surface temperature as a function of various changes in operating parameters was also obtained. This data is expected to aid the modeling of ablation and plume dynamics. The second experiment involved a time and spatial measurement of the spectrally resolved absorbance of the laser produced plume. This experiment explored the possibility of developing absorbance and fluorescence to detect carbon nanotubes during production. To attain control over the production of nanotubes with specific properties and reduce costs, a real time in situ diagnostics method would be very beneficial. Results from this summer's work indicate that detection of nanotubes during production may possibly be used for production feed back control.

DeBoer, Gary D.↗
NASA NTRS1993

Carbonate compositions in CM and CI chondrites, and implications for aqueous alteration

Carbonate minerals in fourteen CM chondrites and two CI chondrites have been analyzed by electron microprobe to provide a better understanding of the aqueous processes that affected carbonaceous chondrite parent bodies. Calcites in CM chondrites and dolomites and magnesites in CI chondrites display the compositions expected of stable phases formed at low temperatures. Dolomites in CM chondrites, identified here for the first time in five members of the group, have small amounts of excess Ca which may reflect metastable growth. The distribution of Fe between dolomite and coexisting serpentine differs in the two chondrite groups. If the distributions reflect an approach to chemical equilibrium, then the difference implies higher alteration temperatures for the CI group than the CM group in agreement with the results of previously published oxygen isotope thermometry and mineral solubility modeling of the alteration process. Dolomite Fe contents are relatively uniform in the two chondrite groups. Dolomite Mn contents, by contrast, vary widely. The variations may reflect transport-controlled coprecipitation of Mn resulting from a heterogeneous distribution of the element in the anhydrous precursor material. If this interpretation is correct, then the altering fluids were essentially immobile white hydration reactions proceeded on the meteorite parent bodies. The near closed-system character of the alteration process, long known from bulk chemical analyses of the meteorites, is a direct consequence of the limited mobility of dissolved species.

Johnson, Craig A.↗
DOE OSTI2025

HfZr_BCC_SolidSolution_128atoms_VASP6

We performed density functional theory (DFT) calculations for body-centered-cubic (BCC) structures with 128 lattices sites of solid solution binary alloys hafnium-zirconium (Hf-Zr). The electronic structures of alloys have been calculated using Vienna Ab initio Simulation Package (VASP). Within this package the DFT approach is used to reduce many-body Schrodinger equation to set of single particle Kohn-Sham (KS) equations. The generalized electronic exchange-correlation functional is described by generalized gradient approximation with the Perdew-Burke-Ernzerhof parametrization. The electron-ion interactions is described by pseudopotentials developed within the plane-wave basis projector augmented-wave (PAW) approach. These pseudopotentials are available at the VASP portal (http://cms.mpi.univie.ac.at/vasp/). Our calculations have been run with the pseudopotentials treating s and p semi-core states as valence in case for the elements Hf and Zr. The electronic densities and potentials are expanded over plane-waves with energy cutoff of 350 eV. 2x2x2 k-mesh and normal precision were used. The alloys were modeled by supercell containing 128 randomly distributed atoms. At initial step the atoms occupy perfect bcc lattice cites. This initial structure was optimized until energy changes less than 1e-6 eV, while forces acting on atoms don't exceed 1e-2 eV/angstrom. The electron-ion interaction is described by PAW pseudopotentials. The calculations have been collected by sampling chemical compositions across the entire compositional range. The chemical compositions have been sampled by progressively changing the number of atoms per constituent by 4. For each chemical composition of binaries and ternaries, the first-principle calculations have been run for 100 randomized arrangements of the constituents on the BCC lattice sites. We collected data for a total of 3,100 randomized atomic structures over 31 chemical compositions.

36 MATERIALS SCIENCE↗
DOE OSTI2025

The formation and structure of iron-dominated planetesimals

Metal-rich asteroids and iron meteorites are considered core remnants of differentiated planetesimals and/or products of oxygen-depleted accretion. Investigating the origins of iron-rich planetesimals could provide key insights into planet formation mechanisms. Using differentiation models, we evaluate the interior structure and composition of representative-sized planetesimals (~200 km diameter), while varying oxygen fugacity and initial bulk meteoritic composition. Under the oxygen-poor conditions that likely existed early in the inner regions of the Solar System and other protoplanetary disks, core fractions remain relatively consistent across a range of bulk compositions (CI, H, EH, and CBa). Some of these cores could incorporate significant amounts of silicon (10–30 weight%) and explain the metal fractions of Fe-rich bodies in the absence of mantle stripping. Conversely, planetesimals forming under more oxidizing conditions, such as beyond snow lines, could exhibit smaller cores, enriched in carbon, sulfur (>1 wt%), and oxides. Sulfur-rich cores, like those formed from EH and H bulk compositions, could remain partly molten, sustain dynamos, and even drive sulfur-rich volcanism. Additionally, bodies with high carbon contents, such as CI compositions, can form graphitic outer layers. These variations highlight the importance of initial formation conditions in shaping planetesimal structures. Future missions, such as NASA’s Psyche mission, offer an opportunity to measure the relative abundances of key elements (Fe, Ni, Si, and S) necessary to distinguish among formation scenarios and structure models for Fe-rich and reduced planetesimals.

meteorites↗
NASA NTRS1976

Asteroids as meteorite parent-bodies - The astronomical perspective

A review of astronomical evidence suggests that asteroids are the parent-bodies for most meteorites. The surfaces of most asteroids are like carbonaceous chondrites while a significant minority are of stony-iron composition. Other meteorite types are recognized in the belt but are rare. The size distribution of stony-iron asteroids implies they are remnant cores of about 100 differentiated bodies subjected to collisional fragmentation by carbonaceous objects initially about 300 times more numerous than now. Incomplete evidence on parent-body collisions exists in data on Hirayama families, asteroid lightcurves, and the compositional homogeneity of individual asteroids. Modern-day asteroid regoliths are thin and cannot have been environments for formation of most brecciated, gas-rich meteorites; such meteorites formed during early accretion of the asteroids. A scenario for the origin and evolution of meteorite parent-bodies is presented which includes: (1) interruption of planet-formation by processes due to Jupiter; (2) substantial asteroidal collisions during the first 0.5 b.y.; and (3) formation of most meteorite types within the differentiated bodies.

Chapman, C. R.↗
NASA NTRS1993

Isotopic composition and concentration of sulfur in carbonaceous chondrites

New sulfur isotopic ratio measurements are reported for seven carbonaceous chondrites. Newly developed procedures permit measurement of delta S-33, delta S-34, and delta S-36 at precisions significantly greater than previously reported. A search for S-36 nucleosynthetic anomalies coproduced with anomalies in, for example, Ti-50 and Ca-48 was negative. The high endemic sulfur concentration probably dilutes any S-36 anomaly, and separation of individual sulfur phases may be needed to identify S-36 carrier phases. Large internal isotopic variations are observed, deriving from parent body and possibly nebular processes. Chondrule separates from Allende demonstrate isotopic compositions which vary as a function of diameter. High-temperature gas-solid exchange and a two-component mixing model may account for the observations. High-resolution isotopic data and structural information are reported for organic sulfur compounds separated by chemical extractions. The insoluble organics appear to be of either aliphatic or alicyclic structure and are dominant phases.

Gao, Xia↗
NASA NTRS2000

Crystallization of Ca-Al-Rich Inclusions: Experimental Studies on the Effects of Repeated Heating Events

The observed textures and chemistry of Ca-Al-rich inclusions (CAIs) are presumed to be the culmination of a series of repeated heating and cooling events in the early history of the solar nebula. We have examined the effects of these heating/cooling cycles experimentally on a bulk composition representing an average Type B Ca-Al-rich inclusion composition. We have tested the effect of the nature of the starting material. Although the most recent and/or highest temperature event prior to incorporation into the parent body dominates the texture and chemistry of the CAI, prior events also affect the phase compositions and textures. We have determined that heating precursor grains to about 1275 C prior to the final melting event increases the likelihood of anorthite crystallization in subsequent higher temperature events and a prior high temperature even that produced dendritic melilite results in melilite that shows evidence of rapid crystallization in subsequent lower temperature events. Prior low temperature pre-crystallization events produce final ran products with pyroxene compositions similar to Type B Ca-Al-rich inclusions, and the glass (residual liquid) composition is more anorthitic than any other experiments to date. The addition of Pt powder to the starting material appears to enhance the ability of anorthite to nucleate from this composition.

Paque, Julie M.↗
NASA NTRSDate not supplied

Simulating Micrometeoroid Bombardment on Mercury: Identifying New Space Weathering Features in the Laboratory

Airless bodies are continually exposed to the harsh interplanetary space environment, causing the alteration of their surfaces through a process known as space weathering (SW). SW is dominated by solar wind irradiation and micrometeoroid bombardment, which together alter the spectral, microstructural, and chemical characteristics of grains on the surface of airless bodies. The effects of SW are variable and depend on the heliocentric distance and the initial composition of the planetary surface, among other factors. On the Moon and S- type asteroids, it is well established that SW darkens and reddens the surface of these bodies and attenuates absorption bands across the Vis-NIR wavelengths. These spectral effects are largely the result of the production of metallic Fe nanoparticles (npFe). However, Mercury’s SW environment is unique compared to the Moon and S-type asteroids. Mercury is a geochemical endmember, with a surface composition low in Fe (<2 wt.%) and enriched in volatile components, including regions of the surface hypothesized to contain up to 4 wt.% graphite in the low reflectance material (LRM). In fact, the presence of graphite on Mercury has been hypothesized to act as a reducing agent for silicates during SW to produce Si-bearing Fe-rich metal. In addition, its location in the solar system exposes Mercury to an extreme SW environment, with the surface of the planet experiencing an intense solar wind flux and higher flux and velocity of micrometeoroid impactors compared to the Moon and S-type asteroids. The effects that such harsh SW has on materials with the unique compositional characteristics of Mercury are not well constrained. To better understand SW at Mercury, we must investigate these processes in the laboratory. Here, we present the results of our analyses of the spectral, microstructural and chemical characteristics of Mercury analog samples irradiated by pulsed laser to simulate the short duration, high temperature events associated with micrometeoroid impacts.

Nick Bott↗
NASA NTRS2003

Ar-39 - Ar-40 Evidence for an Approximately 4.26 Ga Impact Heating Event on the LL Parent Body

Miller Range 99301 is a type 6, unbrecciated LL chondrite. MIL 99301 is of interest because some compositional and petrographic features suggest it experienced rather high shock grades, whereas other features suggest it is relatively unshocked. Inconsistent shock indicators could be explained if MIL 99301 was shocked but then partly annealed by heat produced by impacts on the parent body. The hypothesis that MIL 99301 experienced high temperature metamorphism (type 6) followed by a later shock event that heated, but did not melt, the constituent feldspar can be evaluated using (39)Ar-(40)Ar chronology. This is because (39)Ar-(40)Ar ages of shocked ordinary chondrites are generally <4.2 Ga, whereas (39)Ar-(40)Ar ages of unshocked meteorites are generally older, and between 4.52 - 4.38 Ga.

Dixon, E. T.↗
NASA NTRSDate not supplied

Metal-silicate Partitioning of Re, Ru, Pt, Os, Ti, Nb, and Ta in Reduced Differentiated Planetary Bodies

Siderophile (iron-loving) elements are strongly fractionated during differentiation of planetary bodies into core and mantle [1]. Because the fractionation is controlled by the pressure, temperature, redox conditions, and composition, this group of elements can provide important constraints on the conditions of accretion and core formation in early solar system bodies (planetesimals) and planets (Earth, Mercury, Venus)[2]. At the reducing conditions thought to prevail in the early solar system, Si is known to alloy with FeNi metallic liquids (e.g., [3]) affecting the activity coefficients of siderophile elements in FeNi liquids and thus ultimately their detailed partitioning between metal and silicate melt. The effect of Si can be significant for some siderophile elements, as demonstrated previously by (e.g., [4]: Ni, Co; [5,6]: Ge, As, Sb, Pd, Pt, Au). The effect of Si has not yet been determined for several key groups of siderophile elements including the highly siderophile Re, Ru and Os, and the weakly siderophile Ta, Nb, and Ti. Here, we report new experiments designed to quantify the effect of Si on the partitioning of Re, Pt, Os, Ru, Ti, Ta and Nb between metal and silicate melts. The results will be used to evaluate metal/silicate equilibrium for Nb, Ta, Ti and Nb/Ta ratios in planetary mantles, mantle concentrations of Ru, Re, Pt, Os during accretion, the evolution of Re/Os, Pt/Os ratios in magma oceans, and the role of late veneer in establishing Re and Ru abundances in the terrestrial mantle.

core formation↗
NASA NTRS1987

Making Ceramic Parts by Laminating and Sintering Thin Sheets

Chemical composition varies as function of depth. Technique developed to fabricate monolithic ceramic component by sintering laminated body made from thin sheets of green ceramic. Method allows discrete changes in chemistry effected across monolith. Component having one-dimensional variation in material composition fabricated in this manner.

Cawley, J. D.↗