Results for “block structure” — Page 33

NASA NTRS1976

A simulation for gravity fine structure recovery from low-low GRAVSAT SST data

Covariance error analysis techniques were applied to investigate estimation strategies for the low-low SST mission for accurate local recovery of gravitational fine structure, considering the aliasing effects of unsolved for parameters. A 5 degree by 5 degree surface density block representation of the high order geopotential was utilized with the drag-free low-low GRAVSAT configuration in a circular polar orbit at 250 km altitude. Recovery of local sets of density blocks from long data arcs was found not to be feasible due to strong aliasing effects. The error analysis for the recovery of local sets of density blocks using independent short data arcs demonstrated that the estimation strategy of simultaneously estimating a local set of blocks covered by data and two "buffer layers" of blocks not covered by data greatly reduced aliasing errors.

Estes, R. H.↗

NASA NTRS1988

Robustness margin calculation with dynamic and real parametric uncertainty

The problem of robust stability in feedback control systems with real uncertain parameters and unmodeled dynamics, where the latter takes the form of one complex block dynamic uncertainty, is considered. A robustness margin Tm is defined with respect to such model uncertainty structure and robust stability is characterized in terms of it. An algorithm to calculate Tm and the closely related multivariable stability margin km and structured singular value mu measures of robust stability is developed. It is shown that other control problems, such as robust performance for real parametric uncertainty, can also be handled in this framework.

Sideris, Athanasios↗

NASA NTRS1990

Analysis of dual control vibration testing

Analysis of dual control vibration testing is conducted using a two-degree-of-freedom system to represent the interaction between a vibration mode of a test item and a mode of a mounting structure. The results indicate that exact dual control based on specification of the source free acceleration and blocked force is strictly valid only if phase is taken into account. However, extremal dual control without phase alleviates overtesting without risk of undertesting, when the limit acceleration and force specifications are chosen to envelope the coupled system results. Several approaches to deriving appropriate force specifications are explored. Random vibration parametric results from the literature are used to estimate the limit force between coupled oscillators with different source and load masses.

Scharton, Terry D.↗

NASA NTRS1994

Principal modes of atmospheric circulation anomalies associated with global angular momentum fluctuations

This paper provides a description of the variability of global atmospheric angular momentum (GAM) and its relationship with principal modes of three-dimensional atmospheric circulation anomalies. The data used are 5-day mean global wind fields from the European Centre for Medium-Range Weather Forecasts initialized dataset for 1980-1989. Significant seasonal variation of GAM is observed with maxima in April and November and a minimum during late July. The amplitude of the annual cycle is largest in the upper troposphere and decreases toward the surface. Although the lower tropospheric contribution to the total angular momentum is relatively small, its annual cycle is out of phase with those of the upper atmosphere and GAM. Also identified is a distinct semiannual component, with double peaks appearing in April and November. This signal is most noticeable in the upper troposphere above the 300-mb level. The principal modes of zonal-mean angular momentum and meridional circulation anomalies and their coupled modes are obtained by using empirical orthogonal function analysis and singular value decomposition. It is shown that the leading modes of the angular momentum and meridional circulation are coupled with each other and are responsible for much of the variability in GAM. The coupled modes represent fluctuations of upper-level subtropical zonal flow, which are linked to the modulation of Hadley circulation intensity in both hemispheres. It is found that GAM is highly correlated with the first eigenvector of upper-level streamfunction anomalies, which consists of a superrotational flow in the tropics and subtropics, except over the central Pacific where a 'blocked' flow with two subtropical anticyclonic circulation cells straddling the equator is found. Much of the blocked flow is due to the establishment of dipole anomalies in the velocity potential with centers over the central Pacific and the Maritime Continent on the interannual time scale. On the intraseasonal time scale, GAM fluctuation is dominated by superrotational flow in the tropics, with the blocked flow present to a much lesser extent. The associated velocity potential anomaly has a weak dipole structure with centers over the Indian Ocean and the eastern Pacific. The implications of the above results on the total angular momentum balance of the earth-atmosphere system are also discussed.

Kang, In-Sik↗

NASA NTRS2018

Correlated Amino Acid and Mineralogical Analyses of Milligram and Submilligram Samples of Carbonaceous Chondrite Lonewolf Nunataks 94101

Amino acids, the building blocks of proteins, have been found to be indigenous in the eight carbonaceous chondrite groups. The abundances, structural, enantiomeric and isotopic compositions of amino acids differ significantly among meteorites of different groups and petrologic types. These results suggest parent-body conditions (thermal or aqueous alteration), mineralogy, and the preservation of amino acids are linked. Previously, elucidating specific relationships between amino acids and mineralogy was not possible because the samples analyzed for amino acids were much larger than the scale at which petrologic heterogeneity is observed (sub mm-scale differences corresponding to sub-mg samples); for example, Pizzarello and coworkers measured amino acid abundances and performed X-ray diffraction (XRD) on several samples of the Murchison meteorite, but these analyses were performed on bulk samples that were 500 mg or larger. Advances in the sensitivity of amino acid measurements by liquid chromatography with fluorescence detection/time-of-flight mass spectrometry (LC-FD/TOF-MS), and application of techniques such as high resolution X-ray diffraction (HR-XRD) and scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS) for mineralogical characterizations have now enabled coordinated analyses on the scale at which mineral heterogeneity is observed. In this work, we have analyzed samples of the Lonewolf Nunataks (LON) 94101 CM2 carbonaceous chondrite. We are investigating the link(s) between parent body processes, mineralogical context, and amino acid compositions in meteorites on bulk samples (approx. 20mg) and mineral separates (< or = 3mg) from several of spatial locations within our allocated samples. Preliminary results of these analyses are presented here.

LONEWOLF NUNATAKS 94101↗

NASA NTRS2019

Orion Heat Shield Manufacturing Producibility Improvements for the EM-1 Flight Test Program

This paper describes how the Orion program is incorporating improvements in the heat shield design and manufacturing processes reducing programmatic risk and ensuring crew safety in support of NASA’s Exploration Missions. The Orion program successfully completed the EFT-1 flight test in 2014 and is currently developing the EM-1 spacecraft to meet the test objectives of an orbital mission to the moon and return to earth in 2019. Lessons learned from the EFT-1 manufacturing and flight test experience are being incorporated into a wide variety of vehicle systems and manufacturing processes to reduce risk to the Orion missions and flight crew. A critical contributor to crew safety is the heat shield that protects the crew capsule during re-entry through the earth’s atmosphere for return from deep space. The first flight test vehicle, EFT-1, was manufactured and tested in the Neil Armstrong Operations and Checkout (O&C) facility at KSC to demonstrate early risk reduction including the functionality of the Thermal Protection Systems (TPS) for capsule safe return to earth. The approach for the EFT-1 heat shield utilized a low risk approach using Apollo heritage design and manufacturing processes using an Avcoat TPS ablator with a honeycomb substrate to provide a one piece heat shield to meet the mission re-entry heating environments. The manufacturing processes used honeycomb cell injection guns which were redeveloped from the Apollo Lunar Program processes to build the EFT-1 heat shield. The completed heat shield was transported across the country by aircraft to the O&C at KSC for installation onto the capsule. The EFT-1 heat shield successfully performed its mission and experienced ~80% of the re-entry velocity (50% heating rate) for a lunar return for an Exploration Mission. The second flight test vehicle is the EM-1 mission which will have additional flight systems installed to fly to the moon and return. Heat shield design and producibility improvements have been incorporated in the EM-1 vehicle to meet deep space mission and programmatic requirements. The design continues to use the Avcoat material, but in a “block” configuration to enable improvements in the application processes as well as additional improvements in the carrier structure design and manufacturing operations. Incorporating flight test results and producibility improvements from EFT-1 for the heat shield system design and processes have improved the thermal protection capability, improved the producibility, and cost for EM-1 flight test.

Producibility↗

NASA NTRSDate not supplied

Confidence-Based Buffer for Strategic Deconfliction with Probabilistic Operational Intent

This paper presents a methodology to expand the 95% confidence level of the elliptical geometry given by Unmanned Aircraft System (UAS) operators planning to fly Beyond Visual Line of Sight (BVLOS) to any confidence level before being fed to the strategic deconfliction (SD) module, effectively increasing the separation buffer between Operational Intents (OIs). To assess the performance of this approach, it is integrated within an adaptation of the Rolling Horizon with K-Position Search volume-based strategic deconfliction approach, previously developed at NASA Ames, preventing the 4D overlapping of OIs shaped by ellipses instead of traditional blocks. Safety and efficiency metrics are evaluated through the deconfliction of four simulated package delivery route network structures across the San Francisco Metropolitan Area with increasing numbers of crossing waypoints (network complexity). Safety assessment entails the in-house creation of a metric to quantify collision occurrences per flight hour based on the frequency at which the probabilistic operational volume segments are sampled, whereas efficiency is measured using ground delay. Results indicate that the largest buffer growth occurs when increasing the confidence level beyond 99.9% and demonstrate the negative impact of network complexity on both metrics, regardless of the OI geometry. Further, the ellipse-based SD adaptation more accurately estimates temporal separation at crossings, allowing deconflicted vehicles to be closer together. It is concluded that the proposed methodology enables the desired confidence level to serve as an effective controller of buffer size.

strategic deconfliction↗

NASA NTRSDate not supplied

Confidence-Based Buffer for Strategic Deconfliction with Probabilistic Operational Intent

This paper presents a methodology to expand the 95% confidence level of the elliptical geometry given by Unmanned Aircraft System (UAS) operators planning to fly Beyond Visual Line of Sight (BVLOS) to any confidence level before being fed to the strategic deconfliction (SD) module, effectively increasing the separation buffer between Operational Intents (OIs). To assess the performance of this approach, it is integrated within an adaptation of the Rolling Horizon with K-Position Search volume-based strategic deconfliction approach, previously developed at NASA Ames, preventing the 4D overlapping of OIs shaped by ellipses instead of traditional blocks. Safety and efficiency metrics are evaluated through the deconfliction of four simulated package delivery route network structures across the San Francisco Metropolitan Area with increasing numbers of crossing waypoints (network complexity). Safety assessment entails the in-house creation of a metric to quantify collision occurrences per flight hour based on the frequency at which the probabilistic operational volume segments are sampled, whereas efficiency is measured using ground delay. Results indicate that the largest buffer growth occurs when increasing the confidence level beyond 99.9% and demonstrate the negative impact of network complexity on both metrics, regardless of the OI geometry. Further, the ellipse-based SD adaptation more accurately estimates temporal separation at crossings, allowing deconflicted vehicles to be closer together. It is concluded that the proposed methodology enables the desired confidence level to serve as an effective controller of buffer size.

safety↗

NASA NTRS2007

Structural Analysis of the Redesigned Ice/Frost Ramp Bracket

This paper describes the interim structural analysis of a redesigned Ice/Frost Ramp bracket for the Space Shuttle External Tank (ET). The proposed redesigned bracket consists of mounts for attachment to the ET wall, supports for the electronic/instrument cables and propellant repressurization lines that run along the ET, an upper plate, a lower plate, and complex bolted connections. The eight nominal bolted connections are considered critical in the summarized structural analysis. Each bolted connection contains a bolt, a nut, four washers, and a non-metallic spacer and block that are designed for thermal insulation. A three-dimensional (3D) finite element model of the bracket is developed using solid 10-node tetrahedral elements. The loading provided by the ET Project is used in the analysis. Because of the complexities associated with accurately modeling the bolted connections in the bracket, the analysis is performed using a global/local analysis procedure. The finite element analysis of the bracket identifies one of the eight bolted connections as having high stress concentrations. A local area of the bracket surrounding this bolted connection is extracted from the global model and used as a local model. Within the local model, the various components of the bolted connection are refined, and contact is introduced along the appropriate interfaces determined by the analysts. The deformations from the global model are applied as boundary conditions to the local model. The results from the global/local analysis show that while the stresses in the bolts are well within yield, the spacers fail due to compression. The primary objective of the interim structural analysis is to show concept viability for static thermal testing. The proposed design concept would undergo continued design optimization to address the identified analytical assumptions and concept shortcomings, assuming successful thermal testing.

Phillips, D. R.↗

NASA NTRSDate not supplied

Challenges in Scaling Analysis from Coupons to Elements in 3D Woven Composites for a Launch Vehicle End-Ring Structure

The limitations of structural design with 3D woven composites based on homogenized material models characterized using coupon test data, representative unit cell analysis, or a combination of the two are discussed in the context of a space launch system (SLS)-scale end ring. Selected building block test configurations at the coupon, element, and subcomponent scales are described in detail. Highly instrumented tests and X-ray computed tomography inspections are used to characterize the structural behavior and associated damage progression with increasing load. It is shown that a single homogenized material constitutive relationship, applied at coupon and element scale, is not sufficient to model the structural response observed in both tests. In fact, substantially different stress-strain laws are required to predict the response of the coupon and element scale specimens, despite similar loading conditions. A model with discrete representation of the binder tows and cohesive interfaces to model matrix cracking shows much better agreement with the test data at the two length scales. Thus, evidence is provided showing that predictive structural analysis of 3D woven composites requires discrete representation of the tows, matrix cracking morphology, and their interactions in the structural configuration. With accurate knowledge of the element scale behavior, engineering approximations readily enable analysis scale-up to the subcomponent level.

Andrew C Bergan↗

NASA NTRS1981

Effective constitutive relations for large repetitive frame-like structures

Effective mechanical properties for large repetitive framelike structures are derived using combinations of strength of material and orthogonal transformation techniques. Symmetry considerations are used in order to identify independent property constants. The actual values of these constants are constructed according to a building block format which is carried out in the three consecutive steps: (1) all basic planar lattices are identified; (2) effective continuum properties are derived for each of these planar basic grids using matrix structural analysis methods; and (3) orthogonal transformations are used to determine the contribution of each basic set to the overall effective continuum properties of the structure.

Nayfeh, A. H.↗

NASA NTRS1989

REDEX: The ranging equipment diagnostic expert system

REDEX, an advanced prototype expert system that diagnoses hardware failures in the Ranging Equipment (RE) at NASA's Ground Network tracking stations is described. REDEX will help the RE technician identify faulty circuit cards or modules that must be replaced, and thereby reduce troubleshooting time. It features a highly graphical user interface that uses color block diagrams and layout diagrams to illustrate the location of a fault. A semantic network knowledge representation technique was used to model the design structure of the RE. A catalog of generic troubleshooting rules was compiled to represent heuristics that are applied in diagnosing electronic equipment. Specific troubleshooting rules were identified to represent additional diagnostic knowledge that is unique to the RE. Over 50 generic and 250 specific troubleshooting rules have been derived. REDEX is implemented in Prolog on an IBM PC AT-compatible workstation. Block diagram graphics displays are color-coded to identify signals that have been monitored or inferred to have nominal values, signals that are out of tolerance, and circuit cards and functions that are diagnosed as faulty. A hypertext-like scheme is used to allow the user to easily navigate through the space of diagrams and tables. Over 50 graphic and tabular displays have been implemented. REDEX is currently being evaluated in a stand-alone mode using simulated RE fault scenarios. It will soon be interfaced to the RE and tested in an online environment. When completed and fielded, REDEX will be a concrete example of the application of expert systems technology to the problem of improving performance and reducing the lifecycle costs of operating NASA's communications networks in the 1990's.

Luczak, Edward C.↗

NASA NTRS1989

REDEX - The ranging equipment diagnostic expert system

REDEX, an advanced prototype expert system that diagnoses hardware failures in the Ranging Equipment (RE) at NASA's Ground Network tracking stations is described. REDEX will help the RE technician identify faulty circuit cards or modules that must be replaced, and thereby reduce troubleshooting time. It features a highly graphical user interface that uses color block diagrams and layout diagrams to illustrate the location of a fault. A semantic network knowledge representation technique was used to model the design structure of the RE. A catalog of generic troubleshooting rules was compiled to represent heuristics that are applied in diagnosing electronic equipment. Specific troubleshooting rules were identified to represent additional diagnostic knowledge that is unique to the RE. Over 50 generic and 250 specific troubleshooting rules have been derived. REDEX is implemented in Prolog on an IBM PC AT-compatible workstation. Block diagram graphics displays are color-coded to identify signals that have been monitored or inferred to have nominal values, signals that are out of tolerance, and circuit cards and functions that are diagnosed as faulty. A hypertext-like scheme is used to allow the user to easily navigate through the space of diagrams and tables. Over 50 graphic and tabular displays have been implemented. REDEX is currently being evaluated in a stand-alone mode using simulated RE fault scenarios. It will soon be interfaced to the RE and tested in an online environment. When completed and fielded, REDEX will be a concrete example of the application of expert systems technology to the problem of improving performance and reducing the lifecycle costs of operating NASA's communications networks in the 1990s.

Luczak, Edward C.↗

NASA NTRS1993

Rotation of stress and blocks in the Lake Mead, Nevada, Fault System

The combined effects of stress field rotation and material rotation were found in the Lake Mead, Nevada Fault System (LMFS). Fault inversion results imply an apparent 60 deg clockwise (CW) rotation of the stress field since mid-Miocene time. In contrast, structural data from the Great Basin suggest only a 30 deg CW stress field rotation. By incorporating paleomagnetic declination anomalies, it is inferred that slip on faults caused a local 30 deg counterclockwise rotation of blocks and faults in the Lake Mead area, so that the inferred 60 deg CW rotation of the stress field in the LMFS is actually only 30 deg.

Ron, Hagai↗

NASA NTRS2013

NDE Evidence for the Damage Arrestment Performance of PRSEUS Composite Cube During High-Pressure Load Test

As an approach to light-weight, cost-effective and manufacturable structures required to enable the hybrid wing body aircraft, The Boeing Company, Inc. and NASA have developed the Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) concept. A PRSEUS pressure cube was developed as a risk reduction test article to examine a new integral cap joint concept as part of a building block approach for technology development of the PRSEUS concept. The overall specimen strength exceeded the 18.4 psi load requirement as testing resulted in the cube reaching a final pressure load of around 48 psi prior to catastrophic failure. The cube pressure test verified that the joints and structure were capable of sustaining the required loads, and represented the first testing of joined PRSEUS structure. This paper will address the damage arrestment performance of the stitched PRSEUS structure. Following catastrophic failure of the cube, ultrasonic pulse-echo inspection found that the localized damage, surrounding a barely-visible impact damage site, did not change noticeably between just after impact and catastrophic failure of the cube, and did not play a role in the catastrophic failure event. Ultrasonic inspection of the remaining intact cube panels presented three basic types of indications: delaminations between laminae parallel to the face sheets, lying between face sheet and tear strap layers, or between tear strap and flange layers; delaminations above the noodles of stringers, frames or integral caps, lying within face sheet or tear strap layers; and delaminations between the laminae in the inner fillets of the integral caps, where pulloff stresses were expected to be highest. Delaminations of all three types were predominantly contained by the first row of stitches encountered. For the small fraction of delaminations extending beyond the first row of stitches, all were contained by the second stitch row.

Johnston, Patrick H.↗

NASA NTRS2003

The impact crater as a habitat: effects of impact processing of target materials

Impact structures are a rare habitat on Earth. However, where they do occur they can potentially have an important influence on the local ecology. Some of the types of habitat created in the immediate post-impact environment are not specific to the impact phenomenon, such as hydrothermal systems and crater lakes that can be found, for instance, in post-volcanic environments, albeit with different thermal characteristics than those associated with impact. However, some of the habitats created are specifically linked to processes of impact processing. Two examples of how impact processing of target materials has created novel habitats that improve the opportunities for colonization are found in the Haughton impact structure in the Canadian High Arctic. Impact-shocked rocks have become a habitat for endolithic microorganisms, and large, impact-shattered blocks of rock are used as resting sites by avifauna. However, some materials produced by an impact, such as melt sheet rocks, can make craters more biologically depauperate than the area surrounding them. Although there are no recent craters with which to study immediate post-impact colonization, these data yield insights into generalized mechanisms of how impact processing can influence post-impact succession. Because impact events are one of a number of processes that can bring localized destruction to ecosystems, understanding the manner in which impact structures are recolonized is of ecological interest. Impact craters are a universal phenomenon on solid planetary surfaces, and so they are of potential biological relevance on other planetary surfaces, particularly Mars.

Environment↗

NASA NTRS2010

Solar Power Satellite Development: Advances in Modularity and Mechanical Systems

Space solar power satellites require innovative concepts in order to achieve economically and technically feasible designs. The mass and volume constraints of current and planned launch vehicles necessitate highly efficient structural systems be developed. In addition, modularity and in-space deployment will be enabling design attributes. This paper reviews the current challenges of launching and building very large space systems. A building block approach is proposed in order to achieve near-term solar power satellite risk reduction while promoting the necessary long-term technology advances. Promising mechanical systems technologies anticipated in the coming decades including modularity, material systems, structural concepts, and in-space operations are described

Belvin, W. Keith↗

NASA NTRS2017

Composite Reflective Absorptive IR-Blocking Filters Embedded in Metamaterial Antireflection Coated Silicon

Infrared (IR)-blocking filters are crucial for controlling the radiative loading on cryogenic systems and for optimizing the sensitivity of bolometric detectors in the far-IR. We present a new IR filter approach based on a combination of patterned frequency-selective structures on silicon and a thin (2575 micron thick) absorptive composite based on powdered reststrahlen absorbing materials. For a 300 K blackbody, this combination reflects approximately 50% of the incoming light and blocks greater than.99.8% of the total power with negligible thermal gradients and excellent low-frequency transmission. This allows a reduction in the IR thermal loading to negligible levels in a single cold filter. These composite filters are fabricated on silicon substrates, which provide excellent thermal transport laterally through the filter and ensure that the entire area of the absorptive filter stays near the bath temperature. A metamaterial antireflection coating cut into these substrates reduces in-band reflections to below 1%, and the in-band absorption of the powder mix is below 1% for signal bands below 750 GHz. This type of filter can be directly incorporated into silicon refractive optical elements.

Munson, C. D.↗