Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “band structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

594 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

First-Principles Treatment of Vibrational Broadening in X-Ray Excited Valence Band Spectra for n-SrTiO 3 (001)

The valence band maximum (VBM) is an important quantity for semiconductors as it locates the Fermi level relative to the band edge. Accurate measurement of this quantity in near-surface regions of semiconductors by photoemission is a first step toward determining the electronic properties of heterostructures involving these materials. While extrapolating the leading edge of the valence band to the energy axis in photoemission spectra is a widely used way to find the VBM, this method can be ambiguous if the leading edge exhibits multiple slopes. Another way to determine the VBM is to fit the leading edge to an appropriately broadened, cross-section modulated theoretical density of states (DOS). Three kinds of broadening that should be included for maximum accuracy are those due to: (1) finite instrumental resolution, (2) valence hole lifetime, and (3) vibrational excitations. While steps (1) and (2) are straightforward to implement, (3) is more difficult because the appropriate amount of broadening is not known a priori. Here, we demonstrate that explicit inclusion of vibrational broadening using ab initio molecular dynamics facilitates accurate VBM determination for n-SrTiO 3 (001). The total DOS is constructed by summing time-averaged projections at elevated temperature onto s - , p - , and d orbitals for the constituent atoms and modulating with the associated photoemission cross sections. Subsequent convolutions of the total DOS, first with a Gaussian of width equal to the experimental energy resolution and second with a Lorentzian to simulate valence hole lifetime effects, yield line shapes that reproduce the experimental leading edges rather well. The VBM is then given by the energy at which the vibrationally broadened total DOS (prior to the convolutions) goes to zero. The VBMs generated by this method quantitatively agree with those resulting from extrapolating from the middle of the measured leading edge for SrTiO 3 .

36 MATERIALS SCIENCE↗
DOE OSTI2022

High Efficiency InGaN LEDs Emitting in Green, Amber and Beyond (Final Report)

This project focuses on developing high efficiency light emitting diodes (LEDs) with green, amber, and longer wavelengths using two compatible material systems based on III-nitride and II-IV-nitride semiconductor heterostructures. The proposed approach uses low-indium-content InGaN and ZnGeN 2 or ZnSnN 2 heterostructure quantum wells (QWs) as the active regions for high efficiency green and amber LEDs, and therefore to advance high efficiency color-mixed white LED technology. This approach takes advantage of the increased flexibility, afforded by the incorporation of the II-IV-nitrides into the III-nitride layers, to tune the QW active region to lower the emission wavelengths and to increase the electron-hole wave function overlap. This strategy paves a new way to extend the InGaN QW LED emission wavelength without using high-indium-content InGaN. An industrially preferable metalorganic chemical vapor deposition (MOCVD) method was used to develop the growth of ZnGeN 2 and ZnSnN 2 that are compatible with the InGaN growth. The unique dual chamber MOCVD instrument at OSU was used in this project. This program created an opportunity for the two institutions (The Ohio State University and Case Western Reserve University) with complementary expertise to perform this work. Two graduate students (Md Rezaul Karim (OSU) and Benthara Hewage Dinushi Jayatunga (CWRU)) gained experience in MOCVD growth and various characterization methods including scanning electron microscopy, x-ray diffraction spectroscopy, x-ray photoemission spectroscopy, Hall measurements, cathodoluminescence and photoluminescence. Both students successfully defended their PhD dissertations in April/May 2021. Both Karim and Jayatunga have joined Intel as engineers in June/July 2021. Another two graduate students Kaitian Zhang (OSU) and Chenxi Hu (CWRU) joined the project team since spring 2021 to continue on this project. They were trained on MOCVD epitaxy of InGaN QWs and materials characterization including SEM, AFM, PL, CL, XRD, Hall measurements and electroluminescence. A third student, Vijay Gopal Thirupakuzi Vangipuram (OSU), who joined the group in fall 2021 to perform LED fabrication and characterization. The key research accomplishments of the project include: (1) Successful development of MOCVD epitaxy of single crystalline ZnGeN 2 and ZnSnN 2 . MOCVD growth parameters that determine the stoichiometry of ZnGeN 2 and ZnSnN 2 films were identified. (2) Experimentally determined the band offsets between GaN/ZnGeN 2 and GaN/ZnGaSnN 2 hetero-interfaces, which agree very well with the theoretical predictions. (3) Demonstrated the incorporation of thin ZnGeN 2 layer in InGaN QWs. Proof-of-concept of the InGaN-ZnGeN 2 QW design demonstrated as much as 80 nm of red shift without increasing In composition or QW thickness. (4) InGaN/ZnGeN 2 QWs emitting at 480 nm achieved IQE of 47%. Resulted from this project, 7 journal articles were published, and 9 conference papers were presented.

36 MATERIALS SCIENCE↗
DOE OSTI2025

2025 ASMS Investigation of the Collision-Induced Dissociation Mechanism of Protonated TODGA with IRIS

Title (20 words): Investigation of the Collision-Induced Dissociation Mechanism of Protonated TODGA with IRIS Introduction (120 words): One of the challenges facing wide-spread adoption of nuclear power is the development of efficient separation processes for used nuclear fuel. The molecules in separation processes are subjected to an extreme environment due to the high radiation fields from the used fuel and highly acidic media used for fuel dissolution, which results in significant molecular degradation, leading to reduced process efficiency. These degradation products must be identified and studied so mitigation strategies can be developed to maintain process efficiency. However, complex systems can have many degradation products, complicating identification. Untargeted analysis tools could be used to understand radiation chemistry in complex systems. However, this would necessitate improved understanding of the gas-phase fragmentation mechanisms of fuel cycle molecules like tetraoctyldiglycolamide (TODGA). Methods (120 words): The gas-phase fragmentation of protonated TODGA was investigated using collision-induced dissociation (CID), resonance ejection, and infrared ion spectroscopy (IRIS). CID and resonance ejection experiments were conducted using a Bruker Daltonics (Bremen, Gemany) SolariX XR fourier transform ion cyclotron resonance (FT-ICR) mass spectrometer. IRIS spectra of protonated TODGA and its two CID fragmentation products were measured using a modified Bruker amaZon Speed ETD 3D quadrupole ion trap mass spectrometer coupled to the Free Electron Lasers for Infrared eXperiments (FELIX) free electron laser. Measured spectra were compared with density functional theory (DFT) calculations using the Gaussian 16, Revision C.02 software package with the ?B97X-D functional and def2-TZVPP basis sets. Candidate structures were generated using the CREST 3.0 conformational sampling software tool. Preliminary Data (300 words): Collision-induced dissociation of protonated TODGA ([C36H73N2O3]+, m/z=581.562) results two fragment ions, one at m/z=340.285 assigned as [C20H38NO3]+ and the other at m/z=312.290, assigned as [C19H38NO2]+. Based on the assigned formula and the structure of protonated TODGA, the fragment at m/z=340.285 is likely formed from elimination of neutral dioctylamine. Comparison of the IRIS spectrum of m/z=340.285 with DFT predictions suggests it contains a ring structure, and is assigned as N-octyl-N-(6-oxo-1,4-dioxan-2-ylidene)octan-1-aminium. Based on this structure and the structure of protonated TODGA, we hypothesize this fragment formed from elimination of neutral dioctylamine followed by a ring closure mechanism. Comparison of the IRIS spectrum of the fragment at m/z=312.290 with DFT predictions also indicated the presence of a ring structure, assigned as N-(1,3-dioxolan-4-ylidene)-N-octyloctan-1-aminium. This product could be formed from elimination of carbon monoxide from the ring of m/z=340.285 as a sequential fragmentation or formed directly from protonated TODGA via elimination of neutral N,N-dioctylformamide followed by a ring closure. Resonance ejection experiments where m/z=340 was continuously ejected from the IRC cell showed no decrease in intensity of m/z=312.290 across several collision energies, suggesting that the later, direct formation mechanism, dominates. The location of the ionizing proton in protonated TODGA is important for modeling the fragmentation mechanisms. DFT calculations suggested that the position of bands involving the coupled vibrations of the amide C—N and C=O bonds in TODGA are the most sensitive to proton location. Evaluation of the IRIS spectrum of protonated TODGA suggests that the ionizing proton is located between the two amid oxygens. This protonation location was calculated to lie approximately 30 kJ/mol lower in energy than the next lowest energy location, with the proton located solely on one of the amide oxygens. Novel aspect (20 words): Infrared ion spectroscopy combined with resonance ejection experiments and density functional theory to probe the collision-induced dissociation mechanism of tetraoctyldiglycolamide.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗
DOE OSTI2022

Perturbation theory models for LSST-era galaxy clustering: Tests with subpercent mock catalog measurements in Fourier and configuration space

Here, we analyze the clustering of galaxies using the z = 1.006 snapshot of the CosmoDC2 simulation, a high-fidelity synthetic galaxy catalog designed to validate analysis methods for the Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST). We present sub-percent measurements of the galaxy auto-correlation and galaxy-dark matter cross correlations in Fourier space and configuration space for a magnitude-limited galaxy sample. At these levels of precision, the statistical errors of the measurement are comparable to the systematic effects present in the simulation and measurement procedure; nevertheless, using a hybrid-PT model, we are able to model non-linear galaxy bias with 0.5% precision up to scales of k max = 0.5 h/Mpc and r min = 4 Mpc/h. While the linear bias parameter is measured with 0.01% precision, other bias parameters are determined with considerably weaker constraints and sometimes bimodal posterior distributions. We compare our fiducial model with lower dimensional models where the higher-order bias parameters are fixed at their co-evolution values and find that leaving these parameters free provides significant improvements in our ability to model small scale information. We also compare bias parameters for galaxy samples defined using different magnitude bands and find agreement between samples containing equal numbers of galaxies. Finally, we compare bias parameters between Fourier space and configuration space and find moderate to significant tension between the two approaches. Although our model is often unable to fit the CosmoDC2 galaxy samples within the 0.1% precision of our measurements, our results suggest that the hybrid-PT model used in this analysis is capable of modeling non-linear galaxy bias within the percent level precision needed for upcoming galaxy surveys.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Band Energy Dependence of Defect Formation in the Topological Semimetal Cd3As2

Cadmium Arsenide (Cd3As2) is a prototypical Dirac semimetal that manifests topological properties in a 3D bulk material. In defect-free Cd3As2, the Fermi level lies at a minimum in the density of states at the Dirac point, but experimentally it forms with excess electron carriers and an elevated EF, thereby masking the topological features. To computationally study the self-doping of Cd3As2, we combine density functional theory (DFT) calculations for defect formation energies with quasi-particle self-consistent GW (QSGW) electronic structure calculations. We demonstrate an innate dependence of the point defect formation energies on carrier concentrations and use the QSGW calculated density of states to extrapolate formation energies to arbitrary electron concentrations. This approach allows the quantitative modeling of thermodynamic defect equilibria in topological semimetals and is used to predict how Cd3As2 growth conditions affect the position of EF relative to the Dirac point.

CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS↗
DOE OSTI2024

Generating mock galaxy catalogues for flux-limited samples like the DESI Bright Galaxy Survey

ABSTRACT Accurate mock galaxy catalogues are crucial to validate analysis pipelines used to constrain dark energy models. We present a fast HOD-fitting method which we apply to the AbacusSummit simulations to create a set of mock catalogues for the DESI Bright Galaxy Survey, which contain r-band magnitudes and $(g-r)$ colours. The halo tabulation method fits HODs for different absolute magnitude threshold samples simultaneously, preventing unphysical HOD crossing between samples. We validate the HOD fitting procedure by fitting to real-space clustering measurements and galaxy number densities from the MXXL BGS mock, which was tuned to the SDSS and GAMA surveys. The best-fitting clustering measurements and number densities are mostly within the assumed errors, but the clustering for the faint samples is low on large scales. The best-fitting HOD parameters are robust when fitting to simulations with different realizations of the initial conditions. When varying the cosmology, trends are seen as a function of each cosmological parameter. We use the best-fitting HOD parameters to create cubic box and cut sky mocks from the AbacusSummit simulations, in a range of cosmologies. As an illustration, we compare the ${}^{0.1}M_r\lt -20$ sample of galaxies in the mock with BGS measurements from the DESI one-percent survey. We find good agreement in the number densities, and the projected correlation function is reasonable, with differences that can be improved in the future by fitting directly to BGS clustering measurements. The cubic box and cut-sky mocks in different cosmologies are made publicly available.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Nanosecond Structure of Radical Pair Intermediates from High-Frequency Quantum Oscillations: Insight into the Q A •– to Q B Electron Transfer Step in Purple Bacterial Photosynthesis

We demonstrate the validity of our approach to deduce, from the anisotropy of quantum oscillations, the geometry of short-lived radical pair intermediates in photosynthesis. A global fit of a two-dimensional W-band (94 GHz) electron paramagnetic resonance (EPR) experiment provides the same global minimum values for the geometry of the A-side radical pair P 700 •+ A 1A •− in photosystem I (PSI) as observed in a previous Q-band (34 GHz) EPR study, yet with a significantly increased convergence rate of 62%. This demonstrates that the global fit yields the correct radical pair geometry even at Q-band frequencies. With this information, we revisit our previous Q-band study of the cofactor arrangement of P 865 •+ Q A •− , the stabilized charge-separated state in purple bacterial reaction centers (RCs). Analysis of calculated two-dimensional data sets of P 865 •+ Q A •− reveals that the quantum oscillation technique is unaffected by a mirror ambiguity in disordered solids and thus can provide unambiguous solutions for all five Euler angles of the radical pair geometry. This enables us to elucidate the Q A •− to Q B electron transfer step in purple bacterial photosynthesis, the subject of controversial discussions for more than 25 years. Our results show that this electron transfer step involves a gating mechanism requiring a 60° rotation of the headgroup of Q A •− in its binding pocket.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Optical/X-ray/radio view of Abell 1213: A galaxy cluster with anomalous diffuse radio emission

Context. Abell 1213, a low-richness galaxy system, is known to host an anomalous radio halo detected in data of the Very Large Array (VLA). It is an outlier with regard to the relation between the radio halo power and the X-ray luminosity of the parent clusters. Aims. Our aim is to analyze the cluster in the optical, X-ray, and radio bands to characterize the environment of its diffuse radio emission and to shed new light on its nature. Methods. We used optical data from the Sloan Digital Sky Survey to study the internal dynamics of the cluster. We also analyzed archival XMM-Newton X-ray data to unveil the properties of its hot intracluster medium. Finally, we used recent data from the LOw Frequency ARray (LOFAR) at 144 MHz, together with VLA data at 1.4 GHz, to study the spectral behavior of the diffuse radio source. Results. Both our optical and X-ray analysis reveal that this low-mass cluster exhibits disturbed dynamics. In fact, it is composed of several galaxy groups in the peripheral regions and, in particular, in the core, where we find evidence of substructures oriented in the NE–SW direction, with hints of a merger nearly along the line of sight. The analysis of the X-ray emission adds further evidence that the cluster is in an unrelaxed dynamical state. At radio wavelengths, the LOFAR data show that the diffuse emission is ~510 kpc in size. Moreover, there are hints of low-surface-brightness emission permeating the cluster center. Conclusions. The environment of the diffuse radio emission is not what we would expect for a classical halo. The spectral index map of the radio source is compatible with a relic interpretation, possibly due to a merger in the N–S or NE–SW directions, in agreement with the substructures detected through the optical analysis. The fragmented, diffuse radio emissions at the cluster center could be attributed to the surface brightness peaks of a faint central radio halo.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Search for in-band transitions in the candidate superdeformed band in Si 28

Background: Superdeformed (SD) bands are suggested by theory around Ca 40 and in lighter alpha-conjugate nuclei such as Mg 24 , Si 28 , and S 32 . Such predictions originate from a number of theoretical models including mean-field models and antisymmetrized molecular dynamics (AMD) calculations. While SD bands have been identified in Ca 40 and its near neighbors, evidence of their existence in the lighter, midshell nuclei is circumstantial at best. Additionally, the key evidence of superdeformation would be the observation of transitions with high B ( E 2 ) transition strengths connecting states in a rotational sequence. This is challenging information to obtain since the bands lie at a high excitation energy and competition from out-of-band decay is dominant. Purpose: The purpose of the present study is to establish a new methodology to circumvent the difficulties in identifying and quantifying in-band transitions through directly populating candidate states in the SD band in Si 28 through inelastic alpha scattering, selecting such states with a spectrometer, and measuring their gamma-ray decay with a large array of high-purity germanium detectors, allowing direct access to electromagnetic transition strengths. Methods: Excited states in Si 28 were populated in the Si 28 ( α , α ' ) reaction using a 130-MeV He 4 beam from the K140 AVF cyclotron at the Research Center for Nuclear Physics. Outgoing alpha particles were analyzed using the Grand Raiden spectrometer positioned at an angle of 9 . 1 ° to favor the population of states with J ≈ 4 . Coincident gamma rays were detected with the CAGRA array of 12 HPGe clover detectors augmented by a set of four large LaBr 3 detectors. Results: Data analysis showed that it was possible to identify additional low-energy transitions in competition with high-energy decays from excited states in Si 28 in the vicinity of 10 MeV. However, while the candidate 4 + SD state at 10.944 MeV was populated, a 1148-keV transition to the candidate 2 + SD state at 9.796 MeV was not observed, and only an upper limit for its transition strength of B ( E 2 ) < 43 W.u. could be established. This contradicts AMD predictions of ≈ 200 W.u. for such a transition. Conclusion: The present study strongly rejects the hypothesis that the candidate set of states identified in Si 28 represents an SD band, which demonstrates the potential of the methodology devised here.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Collective Modes in Multilayer Graphene/𝛼−RuCl 3 Heterostructures

Collective modes in multilayer graphene, such as plasmons and phonons, exhibit sensitivity to displacement fields and interlayer coupling, distinguishing them from their counterparts in single-layer graphene. Here, we engineer collective modes in charge-transfer heterostructures composed of multilayer graphene and 𝛼−RuCl 3 . In heterostructures with a single 𝛼−RuCl 3 interface, the charge transfer generates displacement fields up to 7 V/nm at the interface between 𝛼−RuCl 3 and the adjacent graphene layer—the highest value achieved through charge-transfer methods. As a result of the broken inversion symmetry, we discover enhanced nonlinear optical response and modified phonon selection rules. Conversely, we find that multilayer graphene sandwiched between two 𝛼−RuCl 3 flakes causes displacement fields to cancel. There, we achieve carrier densities as high as 8 ×10 13 cm −2 in multilayer graphene and restore the phonon selection rules to their unperturbed state. Meanwhile, we demonstrate that plasmonic properties derive from the depletion of multiple valence bands. As a result of the quasilinear band dispersion, these “Dirac multiband plasmons” are relatively unaffected by displacement fields. On the other hand, the inverted heterostructure sequence—two multilayer graphene sheets encapsulating 𝛼−RuCl 3 —activates significant alteration of the plasmons via interlayer plasmon-plasmon coupling. Hence, multilayer graphene and 𝛼−RuCl 3 heterostructures offer a gate-free platform for engineering collective modes derived from inversion symmetry and interlayer coupling.

Moore, Samuel L. [Columbia University, New York, N↗
DOE OSTI2020

Structural and photoelectrochemical properties in the thin film system Cu–Fe–V–O and its ternary subsystems Fe–V–O and Cu–V–O

Thin-film material libraries in the ternary and quaternary metal oxide systems Fe–V–O, Cu–V–O, and Cu–Fe–V–O were synthesized using combinatorial reactive co-sputtering with subsequent annealing in air. Their compositional, structural, and functional properties were assessed using high-throughput characterization methods. Prior to the investigation of the quaternary system Cu–Fe–V–O, the compositions (Fe 61 V 39 )O x and (Cu 52 V 48 )O x with promising photoactivity were identified from their ternary subsystems Fe–V–O and Cu–V–O, respectively. Two Cu–Fe–V–O material libraries with (Cu 29-72 Fe 4-27 V 22-57 )O x and (Cu 11-55 Fe 27-73 V 12-34 )O x composition spread were investigated. Seven mixed ternary and quaternary phase regions were identified: I (α-Cu 3 FeV 6 O 26 /FeVO 4 ), II (Cu 5 V 2 O 10 /FeVO 4 /α-Cu 3 Fe 4 V 6 O 26 ), III (Cu 5 V 2 O 10 ), IV (Cu 5 V 2 O 10 /FeVO 4 , V (FeVO 4 /γ-Cu 2 V 2 O 7 /α-Cu 3 Fe 4 V 6 O 26 ), VI (β-Cu 2 V 2 O 7 /α-Cu 3 Fe 4 V 6 O 26 /FeVO 4 ), and VII (β-Cu 3 Fe 4 V 6 O 26 /FeVO 4 ). Furthermore, in the investigated composition range, two photoactive regions, (Cu 53 Fe 7 V 40 )O x and (Cu 45 Fe 21 V 34 )O x , were identified, exhibiting 103 μ A/cm 2 and 108 μ A/cm 2 photocurrent density for the oxygen evolution reaction at 1.63 V vs reversible hydrogen electrode, respectively. The highest photoactive region (Cu 45 Fe 21 V 34 )O x comprises the dominant α-Cu 3 Fe 4 V 6 O 24 phase and minor FeVO 4 phase. This photoactive region corresponds to having an indirect bandgap of 1.87 eV and a direct bandgap of 2.58 eV with an incident photon-to-current efficiency of 30% at a wavelength of 310 nm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

How to Obtain the Redshift Distribution from Probabilistic Redshift Estimates

Abstract A reliable estimate of the redshift distribution n ( z ) is crucial for using weak gravitational lensing and large-scale structures of galaxy catalogs to study cosmology. Spectroscopic redshifts for the dim and numerous galaxies of next-generation weak-lensing surveys are expected to be unavailable, making photometric redshift (photo- z ) probability density functions (PDFs) the next best alternative for comprehensively encapsulating the nontrivial systematics affecting photo- z point estimation. The established stacked estimator of n ( z ) avoids reducing photo- z PDFs to point estimates but yields a systematically biased estimate of n ( z ) that worsens with a decreasing signal-to-noise ratio, the very regime where photo- z PDFs are most necessary. We introduce Cosmological Hierarchical Inference with Probabilistic Photometric Redshifts ( CHIPPR ), a statistically rigorous probabilistic graphical model of redshift-dependent photometry that correctly propagates the redshift uncertainty information beyond the best-fit estimator of n ( z ) produced by traditional procedures and is provably the only self-consistent way to recover n ( z ) from photo- z PDFs. We present the chippr prototype code, noting that the mathematically justifiable approach incurs computational cost. The CHIPPR approach is applicable to any one-point statistic of any random variable, provided the prior probability density used to produce the posteriors is explicitly known; if the prior is implicit, as may be the case for popular photo- z techniques, then the resulting posterior PDFs cannot be used for scientific inference. We therefore recommend that the photo- z community focus on developing methodologies that enable the recovery of photo- z likelihoods with support over all redshifts, either directly or via a known prior probability density.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

High-power test of a C-band linear accelerating structure with an RFSoC-based LLRF system

Normal conducting linear particle accelerators consist of multiple rf stations with accelerating structure cavities. Low-level rf (LLRF) systems are employed to set the phase and amplitude of the field in the accelerating structure and to compensate for the pulse-to-pulse fluctuation of the rf field in the accelerating structures with a feedback loop. The LLRF systems are typically implemented with analog rf mixers, heterodyne-based architectures, and discrete data converters. There are multiple rf signals from each of the rf stations, so the number of rf channels required increases rapidly with multiple rf stations. With a large number of rf channels, the footprint, component cost, and system complexity of the LLRF hardware will increase significantly. To meet the design goals of being compact and affordable for future accelerators, we have designed the next-generation LLRF (NG-LLRF) with a higher integration level based on RFSoC technology. The NG-LLRF system samples rf signals directly and performs rf mixing digitally. Further, the NG-LLRF has been characterized in loopback mode to evaluate the performance of the system and has also been tested with a standing-wave accelerating structure, a prototype for the Cool Copper Collider (C 3 ) with a peak rf power level up to 16.45 MW. The loopback test demonstrated amplitude fluctuation below 0.15% and phase fluctuation below 0.15°, which are considerably better than the requirements of C 3 . The rf signals from the different stages of the accelerating structure at different power levels are measured by the NG-LLRF, which will be critical references for the control algorithm designs. The NG-LLRF also offers flexibility in waveform modulation, so we have used rf pulses with various modulation schemes, which could be useful for controlling some of the rf stations in accelerators. In this paper, the high-power test results at different stages of the test setup will be summarized, analyzed, and discussed.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Galaxy morphological classification catalogue of the Dark Energy Survey Year 3 data with convolutional neural networks

ABSTRACT We present in this paper one of the largest galaxy morphological classification catalogues to date, including over 20 million galaxies, using the Dark Energy Survey (DES) Year 3 data based on convolutional neural networks (CNNs). Monochromatic i-band DES images with linear, logarithmic, and gradient scales, matched with debiased visual classifications from the Galaxy Zoo 1 (GZ1) catalogue, are used to train our CNN models. With a training set including bright galaxies (16 ≤ i < 18) at low redshift (z < 0.25), we furthermore investigate the limit of the accuracy of our predictions applied to galaxies at fainter magnitude and at higher redshifts. Our final catalogue covers magnitudes 16 ≤ i < 21, and redshifts z < 1.0, and provides predicted probabilities to two galaxy types – ellipticals and spirals (disc galaxies). Our CNN classifications reveal an accuracy of over 99 per cent for bright galaxies when comparing with the GZ1 classifications (i < 18). For fainter galaxies, the visual classification carried out by three of the co-authors shows that the CNN classifier correctly categorizes discy galaxies with rounder and blurred features, which humans often incorrectly visually classify as ellipticals. As a part of the validation, we carry out one of the largest examinations of non-parametric methods, including ∼100 ,000 galaxies with the same coverage of magnitude and redshift as the training set from our catalogue. We find that the Gini coefficient is the best single parameter discriminator between ellipticals and spirals for this data set.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Lithography-Defined Semiconductor Moirés with Anomalous In-Gap Quantum Hall States

Quantum materials and phenomena have attracted great interest for their potential applications in next-generation microelectronics and quantum-information technologies. In one especially interesting class of quantum materials, moiré superlattices (MSLs) formed by twisted bilayers of 2D materials, a wide range of novel phenomena are observed. However, there exist daunting challenges such as reproducibility and scalability of utilizing 2D MSLs for microelectronics and quantum technologies due to their exfoliate-tear-stack method. Here, we propose lithography-defined semiconductor MSLs, in which three fundamental parameters electron−electron interaction, spin−orbit coupling, and band topology are designable. We experimentally investigate quantum-transport properties in a moiré specimen made in an InAs quantum well. Strong anomalous in-gap states are observed within the same integer quantum Hall state. Our work opens up new horizons for studying 2D quantum-materials phenomena in semiconductors featuring superior industry-level quality and state-of-the-art technologies, and they may potentially enable new quantum-information and microelectronics technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The LSST DESC DC2 Simulated Sky Survey

Here, we describe the simulated sky survey underlying the second data challenge (DC2) carried out in preparation for analysis of the Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST) by the LSST Dark Energy Science Collaboration (LSST DESC). Significant connections across multiple science domains will be a hallmark of LSST; the DC2 program represents a unique modeling effort that stresses this interconnectivity in a way that has not been attempted before. This effort encompasses a full end-to-end approach: starting from a large N-body simulation, through setting up LSST-like observations including realistic cadences, through image simulations, and finally processing with Rubin's LSST Science Pipelines. This last step ensures that we generate data products resembling those to be delivered by the Rubin Observatory as closely as is currently possible. The simulated DC2 sky survey covers six optical bands in a wide-fast-deep area of approximately 300 deg 2 , as well as a deep drilling field of approximately 1 deg 2 . We simulate 5 yr of the planned 10 yr survey. The DC2 sky survey has multiple purposes. First, the LSST DESC working groups can use the data set to develop a range of DESC analysis pipelines to prepare for the advent of actual data. Second, it serves as a realistic test bed for the image processing software under development for LSST by the Rubin Observatory. In particular, simulated data provide a controlled way to investigate certain image-level systematic effects. Finally, the DC2 sky survey enables the exploration of new scientific ideas in both static and time domain cosmology.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

CHESS 2025: Leaf Area Index (LAI) for meadow, shrub, tree, and understory vegetation

This dataset contains Leaf Area Index (LAI) measurements made as part of the Colorado Headwaters Ecological Spectroscopy Study (CHESS) during June and July of 2025. Data were collected in the Upper Gunnison Basin, Colorado, across three study domains: the Upper East River (CRBU), Almont Triangle (ALMO), and the Upper Taylor Basin (UPTA). Field observations of LAI were collected within 72 hours of airborne data collection by the National Ecological Observatory Network’s Aerial Observation Platform (NEON AOP). The NEON AOP collected waveform LiDAR (Light Detection and Ranging) and imaging spectrometer data in 426 spectral bands from the visible to shortwave infrared. LAI measurements were collected using the LICOR LAI-2200C Plant Canopy Analyzer following protocols outlined in the instrument manual (LI-COR 2019). Sampling targeted four distinct vegetation types: meadows, shrubs, trees, and aspen forest understory. We have archived data separately by site type because different field methods were used for each. At meadow sites, measurements were made at the four corners of 1m x 1m plots, with the instrument moving inward toward the center of the plot. At shrub sites, we measured the canopies of individual shrubs. At tree sites, we made measurements within a 10m x 10m subplot centered around a focal tree, with 30 observations taken on a regular grid. At aspen understory sites, we measured overstory trees following the tree protocol and understory herbaceous vegetation following the meadow protocol. All measurements included above-canopy (A) and below-canopy (B) readings, with specific protocols for scattering correction measurements in direct-sun conditions. Data were processed using the R package `rlai` (Worsham 2025). This package includes functions to calculate LAI, gap fraction, apparent clumping factor (Ω), scattering correction, and other canopy metrics. Package contents: Full file descriptions appear in ‘flmd.csv’. Files named according to the convention ‘lai_*_summary_data_cleaned.csv’ contain summary values of LAI, apparent clumping factor (Ωapp), and scattering correction factors for each site. These are the analysis-ready products that most data users will work with. Files named ‘lai_*_metadata_cleaned.csv’ contain additional site-level observations made during field collection. We have also archived intermediate and supplementary data for users who wish to check our processing approach or apply alternative methods. ‘raw_lai_2200C.zip’ contains the raw files as read from the LI-COR instrument, with no processing applied, in TXT format. The zip archive contains subdirectories by site type, which are further subdivided by sampling area. Filenames correspond to the sampling site number. ‘intermediate_results.zip’ contains detailed output from the processing routines, in JSON format. The zip archive contains subdirectories by site type; filenames correspond to the sampling site number. ‘scattering_correction_logs.zip’ contains logfiles from the implementation of Kobayashi et al.'s (2013) scattering correction algorithm. The logfiles report values of several parameters at each iteration of the algorithm, as the model converges toward a stable solution. They are intended for users who want to verify scattering correction performance. The zip archive contains subdirectories by site type; filenames correspond to the sampling site number. ‘spot_checks.csv’ reports LAI and other values for a small number of files processed with LI-COR FV2200 software (LI-COR 2013) using the same control parameters as in our R-based approach. Additional metadata are provided in a data dictionary describing column names and definitions (dd.csv), and in a file-level metadata file (flmd.csv). All zip files can be expanded with common archive utilities. TXT, CSV, and JSON files can be ingested into R or Python computing environments or read in common text editor utilities. Geospatial information: Geospatial data for mapping measurement site locations are in the files CHESS_polygons_lai_UTM.geojson, CHESS_polygons_shrub_UTM.geojson, and CHESS_polygons_meadow_UTM.geojson in the companion geospatial package for the 2025 CHESS campaign, ‘CHESS 2025: Location data for field observations and sampling’ (Henderson et al., 2026). CHESS Project Description: The Colorado Headwaters Ecological Spectroscopy Study (CHESS) comprised a multi-week airborne remote sensing and field observation campaign in the Upper Gunnison Basin, Colorado, conducted in June and July of 2025. Airborne remote sensing was conducted by the National Ecological Observatory Network Airborne Observation Platform (NEON AOP), concurrent with a field campaign run by the Rocky Mountain Biological Laboratory (RMBL), the Lawrence Berkeley National Laboratory (LBNL) and SLAC National Accelerator Laboratory Watershed Function Science Focus Area (SFA), and NASA-JPL (Jet Propulsion Laboratory) Earth Surface Mineral Dust Source Investigation (EMIT) program. Between June 10 and July 18, 2025, the NEON AOP flight team collected high-resolution aerial imaging spectroscopy and Light Detection and Ranging (LiDAR) data over three domains: the Upper East River (CRBU), Almont Triangle (ALMO), and the Upper Taylor Basin (UPTA). In coordination with the flights, a field campaign acquired ground-truth observations, including observations of vegetation composition, foliar traits, forest demography, and subsurface properties in 18 core sampling areas within the domains. Additional surface water observations were taken at over 380 point locations. All CHESS campaign datasets can be found within the CHESS ESS-DIVE data portal: https://data.ess-dive.lbl.gov/portals/chess. Funding Acknowledgement: Field and remote-sensing data acquisition was performed under a grant from the National Aeronautics and Space Administration (80NSSC24K1005). This work was also supported by the Watershed Function Science Focus Area at Lawrence Berkeley National Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-05CH11231. * Todorov and Worsham are co–first authors.

2018 NEON and 2025 CHESS Campaigns↗
DOE OSTI2026

photoD with Rubin ’s Data Preview 1: First stellar photometric distances and faint blue star deficits

Aims. We investigate the utility of Rubin’s Data Preview 1 (DP1) for estimating stellar number density profiles across the Milky Way halo. Methods. We used stellar broad-band near-UV to near-IR ugrizy photometry released in Rubin’s DP1 to estimate distance and metallicity for blue main sequence stars brighter than r = 24 in three ~1.1 sq. deg. fields at southern Galactic latitudes. Results. Compared to TRILEGAL simulations of the Galaxy’s stellar content, we found a likely deficit of blue main sequence turn-off stars with 22 < r < 24. We interpreted this discrepancy as a signature of a steeper halo number density profile at galactocentric distances 10–50 kpc than the canonical ~1/r 3 profile assumed in TRILEGAL simulations. Conclusions. This interpretation is consistent with earlier suggestions based on observations of more luminous, but much less numerous, evolved stellar populations, along with a few pencil beam surveys of blue main sequence stars in the northern sky. These results bode well for the future Galactic halo exploration with Rubin’s Legacy Survey of Space and Time (LSST).

Galaxy: fundamental parameters↗