Results for “arrival time” — Page 33

NASA NTRS2015

Mars Reconnaissance Orbiter Navigation Strategy for the Comet Siding Spring Encounter

Comet Siding Spring encountered Mars on October 19, 2014 at a distance of about 140,500 km - the nearest comet flyby of a planet in recorded history. Mars Reconnaissance Orbiter (MRO) was able to detect the comet, gather science data, and capture images of the comet as it approached Mars. To help protect MRO from the incoming comet particles, two propulsive maneuvers were performed to position the spacecraft behind Mars at the arrival time of the expected peak particle fluency. This paper documents the strategy that the MRO Navigation Team executed to mitigate risk from the comet particles while allowing scientific observations of the comet flyby.

maneuvers↗

NASA NTRS2017

Using the Coronal Evolution to Successfully Forward Model CMEs' In Situ Magnetic Profiles

Predicting the effects of a coronal mass ejection (CME) impact requires knowing if impact will occur, which part of the CME impacts, and its magnetic properties. We explore the relation between CME deflections and rotations, which change the position and orientation of a CME, and the resulting magnetic profiles at 1 AU. For 45 STEREO-era, Earth-impacting CMEs, we determine the solar source of each CME, reconstruct its coronal position and orientation, and perform a ForeCAT (Forecasting a CME's Altered Trajectory) simulation of the coronal deï¬‚ection and rotation. From the reconstructed and modeled CME deflections and rotations, we determine the solar cycle variation and correlations with CME properties. We assume no evolution between the outer corona and 1 AU and use the ForeCAT results to drive the ForeCAT In situ Data Observer (FIDO) in situ magnetic field model, allowing for comparisons with ACE and Wind observations. We do not attempt to reproduce the arrival time. On average FIDO reproduces the in situ magnetic field for each vector component with an error equivalent to 35 percent of the average total magnetic field strength when the total modeled magnetic field is scaled to match the average observed value. Random walk best fits distinguish between ForeCAT's ability to determine FIDO's input parameters and the limitations of the simple flux rope model. These best fits reduce the average error to 30 percent.The FIDO results are sensitive to changes of order a degree in the CME latitude, longitude, and tilt, suggesting that accurate space weather predictions require accurate measurements of a CME's position and orientation.

Kay, C.↗

NASA NTRS2018

Very Narrow Coronal Mass Ejections Producing Solar Energetic Particles

Aims. Our main aim is to study the relationship between low-energy solar particles (energies below 1 MeV) and very narrow coronal mass ejections (“jets” with angular width ≤ 20°). Methods. For this purpose, we considered 125 very narrow coronal mass ejections (CMEs) from 1999 to 2003 that are potentially associated with low-energy solar particles (LESPs). These events were chosen on the basis of their source location. We studied only very narrow CMEs at the western limb, which are expected to have good magnetic connectivity with Earth. Results. We found 24 very narrow CMEs associated with energetic particles such as ions (protons and 3He), electrons, or both. We show that arrival times at Earth of energetic particles are consistent with onset times of the respective CMEs, and that in the same time intervals, there are no other potential sources of energetic particles. We also demonstrate statistical differences for the angular width distributions using the Kolmogorov–Smirnov test for angular widths for these 24 events. We consider a coherent sample of jets (mostly originating from boundaries of coronal holes) to identify properties of events that produce solar energetic particles (velocities, widths, and position angles). Our study presents a new approach and result: very narrow CMEs can generate low-energy particles in the vicinity of Earth without other activity on the Sun. The results could be very useful for space weather forecasting.

Bronarska, K.↗

NASA NTRS2019

Airborne Spacing for Terminal Arrival Routes (ASTAR) Proof-of-Concept Flight Test

The Airborne Spacing for Terminal Arrival Routes (ASTAR) Flight Test was conducted by the NASA Air Traffic Management Technology Demonstration – 1 (ATD- 1) project to demonstrate the use of NASA’s ASTAR algorithm beyond a simulated environment and assess the operational risks of performing a multi-aircraft flight test of Flight-deck Interval Management (FIM). Utilizing contemporary tools of the Federal Aviation Administration’s Next Generation Air Transportation System (NextGen) such as ADS-B, the ASTAR algorithm calculated speeds that the flight crew flew to achieve a precise spacing interval behind another aircraft at the final approach fix. Airspeed commands issued by the algorithm were flown by the flight crew of the FIM-equipped aircraft to achieve or maintain an assigned spacing goal from a target vehicle. The ASTAR algorithm was integrated with the Boeing supplied B-787 ecoDemonstrator aircraft, and five flight trials were conducted as a joint effort between NASA and Boeing on December 12, 2014. Initial results indicated arrival times within several seconds of accuracy of the planned termination point between two aircraft performing FIM in a real world environment. This flight test opened the way for the much more expansive ATD-1 Avionics Phase II flight test which occurred in early 2017. The flight trials under Phase II preceded further testing by the community in preparation for inclusion of the Interval Management concept as a part of the NextGen environment.

Roper, Roy D.↗

NASA NTRS2019

The Random Transiter – EPIC 249706694/HD 139139

We have identified a star, EPIC 249706694 (HD 139139), that was observed during K2 Campaign 15 with the Kepler extended mission that appears to exhibit 28 transit-like events over the course of the 87-day observation. The unusual aspect of these dips, all but two of which have depths of 200 ± 80 ppm, is that they exhibit no periodicity, and their arrival times could just as well have been produced by a random number generator. We show that no more than four of the events can be part of a periodic sequence. We have done a number of data quality tests to ascertain that these dips are of astrophysical origin, and while we cannot be absolutely certain that this is so, they have all the hallmarks of astrophysical variability on one of two possible host stars (a likely bound pair) in the photometric aperture. We explore a number of ideas for the origin of these dips, including actual planet transits due to multiple or dust emitting planets, anomalously large TTVs, S- and P-type transits in binary systems, a collection of dust-emitting asteroids, ‘dipper-star’ activity, and short-lived starspots. All transit scenarios that we have been able to conjure up appear to fail, while the intrinsic stellar variability hypothesis would be novel and untested.

S. Rappaport↗

NASA NTRS2020

Encealdus Orbilander: A Flagship Mission Concept for Astrobiology

"Whether life exists beyond Earth remains a fundamental question driving our exploration of the Solar System. At Saturn’s moon Enceladus, plumes of oceanic material vented into space allow the investigation of the astrobiological potential of an ocean world, hinted at by Cassini, without the necessity of drilling through kilometers of ice crust. The Enceladus Orbilander is a flagship ($2.56B in fiscal year 2025 dollars) mission concept created for the 2023–2033 Planetary Science Decadal Survey. Orbilander takes full advantage of the opportunity provided by Enceladus’ plumes to search for signs of life. A single spacecraft both orbits and lands, capturing samples from four distinct reservoirs offered by the plumes. These samples, both particulate and vapor, are then analyzed by the Life Detection Suite (LDS), a set of five instruments conducting complementary and orthogonal biosignature-seeking measurements. To provide the context that specifically enhances interpretation of LDS measurements, geochemical and geophysical investigations are conducted both in orbit and on the surface. These reveal the physio-chemical state of the ocean and core as well as the processes involved in ejection of plume material and how these affect the ocean material analyzed by the LDS. The Orbilander can be delivered to the Saturn system via several launch vehicle and trajectory options, including a direct trajectory (7-year cruise), a ∆V-EGA trajectory (9-year cruise) and several options using an inner cruise with Venus and Earth flybys (10-year cruise). Upon Saturn Orbit Insertion, a 4-year moon tour pumps down the Orbilander’s orbit to intercept Enceladus. The most optimal arrival times balance the Jupiter flyby opportunities of the late 2030s and solar illumination at the Enceladus high southern latitudes where plume material is most abundant. This mission concept therefore targets project start in 2030. Upon Enceladus Orbit Insertion, the Orbilander begins a 1.5-year-long campaign of landing site reconnaissance, remote sensing science, and collecting sufficient plume sample to run all but one of the LDS measurements. After successful landing, the Orbilander spends 2 years on the surface conducting multiple LDS measurements with all five instruments on actively and passively collected plume material, as well as seismic investigations. The schedule laid out here is well-defined, but the mission also has operational and resource flexibility should additional reconnaissance be needed. As part of the design study, mission and development risks were identified and mitigation strategies proposed. Technologies key to achieving the life detection science objectives include instrumentation matured under programs like COLDTech and ICEE-2, such as aspects of the sampling system and microfluidic devices, as well as well-known techniques like high-resolution and separation-capable mass spectrometers. Autonomous onboard navigation is planned to maintain a halo orbit around Enceladus to enable passive sampling from orbit as well as reconnaissance measurements for use in site selection and landing. Terrain relative navigation is included to ensure safe landing, given that targeted areas may contain landing hazards. Continued development of radioisotope thermoelectric generator (RTG) technology and long-life batteries is essential for this long duration mission. The Enceladus Orbilander represents an optimal point in the trade space of science value versus cost, taking advantage of the extensive knowledge of Enceladus provided by Cassini, how well Enceladus lends itself to a search for life in material from its ocean, and the flexibility afforded by the innovative design developed by the APL team. By taking full advantage of Enceladus’ plumes both in orbit and on the surface, Orbilander represents a robust search for life with complementary and orthogonal biosignatures as well as contextual geophysical and geochemical measurements, determining not only whether Enceladus is inhabited (at levels up to 500,000× scarcer than in Earth’s oceans) but also why. "

Exobiology↗

NASA NTRS2016

SIRENA Software for Athena X-IFU Event Reconstruction

The X-ray Observatory Athena was proposed in April 2014 as the mission to implement the science theme "The Hot and Energetic Universe" selected by ESA for L2 (the second Large-class mission in ESAs Cosmic Vision science programme). One of the two X-ray detectors designed to be onboard Athena is X-IFU, a cryogenic microcalorimeter based on Transition Edge Sensor (TES) technology that will provide spatially resolved high-resolution spectroscopy. X-IFU will be developed by an international consortium led by IRAP (PI), SRON (co-PI) and IAPS/INAF (co-PI) and involving ESA Member States, Japan and the United States. In Spain, IFCA (CSIC-UC) has an anticipated contribution to X-IFU through the Digital Readout Electronics (DRE) unit, in particular in the Event Processor Subsytem. For this purpose and in collaboration with the Athena end-to-end simulations team, we are currently developing the SIRENA package as part of the publicly available SIXTE end-to-end simulator. SIRENA comprises a set of processing algorithms aimed at recognizing, from a noisy signal, the intensity pulses generated by the absorption of the X-ray photons, to lately reconstruct their energy, position and arrival time. This poster describes the structure of the package and the different algorithms currently implemented as well as their comparative performance in the energy resolution achieved in the reconstruction of the instrument events.

M T Ceballos↗

NASA NTRSDate not supplied

Modeling and simulation of space-based entanglement distribution

In this talk we present a model for analyzing space-based entanglement distribution links. In particular, we analyze deterministic entanglement distribution links relevant to quantum communication applications where all communication nodes must be synchronized with deterministic photon arrival times. The focus is on systems operating within practical limitations set by current technology. The architectures studied in this work are based on all-photonic links with probabilistic (memory-less) entanglement swapping used to signal the success of the entanglement distribution without destroying the entangled state. An end-to-end link model is described which accounts for satellite orbital mechanics as well as the physical effects of entangled photon pair sources, space-to-ground atmospheric channels, two-photon interference, pointing and tracking, and photon counting detectors with and without photon number resolution (this is joint work with Robert Manning, Ian Nemitz, and Bryan Welch).

quantum communication↗

NASA NTRS2022

Quantifying Errors in 3D CME Parameters Derived from Synthetic Data Using White-Light Reconstruction Techniques

Current efforts in space weather forecasting of CMEs have been focused on predicting their arrival time and magnetic structure. To make these predictions, methods have been developed to derive the true CME speed, size, position, and mass, among others. Difficulties in determining the input parameters for CME forecasting models arise from the lack of direct measurements of the coronal magnetic fields and uncertainties in estimating the CME 3D geometric and kinematic parameters after eruption. White-light coronagraph images are usually employed by a variety of CME reconstruction techniques that assume more or less complex geometries. This is the first study from our International Space Science Institute (ISSI) team “Understanding Our Capabilities in Observing and Modeling Coronal Mass Ejections”, in which we explore how subjectivity affects the 3D CME parameters that are obtained from the Graduated Cylindrical Shell (GCS) reconstruction technique, which is widely used in CME research. To be able to quantify such uncertainties, the “true” values that are being fitted should be known, which are impossible to derive from observational data. We have designed two different synthetic scenarios where the “true” geometric parameters are known in order to quantify such uncertainties for the first time. We explore this by using two sets of synthetic data: 1) Using the ray-tracing option from the GCS model software itself, and 2) Using 3D magnetohydrodynamic (MHD) simulation data from the Magnetohydrodynamic Algorithm outside a Sphere code. Our experiment includes different viewing configurations using single and multiple viewpoints. CME reconstructions using a single viewpoint had the largest errors and error ranges overall for both synthetic GCS and simulated MHD white-light data. As the number of viewpoints increased from one to two, the errors decreased by approximately 4° in latitude, 22° in longitude, 14° in tilt, and 10° in half-angle. Our results quantitatively show the critical need for at least two viewpoints to be able to reduce the uncertainty in deriving CME parameters. We did not find a significant decrease in errors when going from two to three viewpoints for our specific hypothetical three spacecraft scenario using synthetic GCS white-light data. As we expected, considering all configurations and numbers of viewpoints, the mean absolute errors in the measured CME parameters are generally significantly higher in the case of the simulated MHD white-light data compared to those from the synthetic white-light images generated by the GCS model. We found the following CME parameter error bars as a starting point for quantifying the minimum error in CME parameters from white-light reconstructions: Δθ (latitude)=6° +2° -3° , Δϕ (longitude)=11° +18° -6° , Δγ (tilt)=25° +8° -7° , Δx (half-angle)=10° +12° -6° , Δh (height)=0.6 +1.2 -0.4 R ⨀ , and Δκ (ratio)=0.1 +0.03 -0.02 .

Coronal mass ejections↗

NASA NTRSDate not supplied

Modeling Methods for 3D Lightning Mapping from Space

Global lightning detection has advanced greatly over the past few decades both on ground and from orbit. Ground-based systems like the Lightning Mapping Array (LMA) excel at high-precision 3D reconstruction of local flashes, while spaceborne lightning sensors have much larger potential coverage but have been limited by coarser resolution and often rely on data from other instruments to determine flash location. The primary focus of this study is to examine the level of flash detail that can be expected from one or more low-Earth orbiting small satellites that combine VHF and optical measurements of lightning, which is a new mission concept called CubeSpark. The goal of CubeSpark is to map the 3D charge structure of thunderstorms at 1-2 km spatial resolution on a global scale, enabling a host of new atmospheric and space electricity studies. In order to maximize the potential data quality and minimize potential cost, flashes were simulated beneath single- and multi-satellite configurations. In the multi-satellite approach, RF detectors on each of the six satellites would measure the arrival times of impulsive VHF sources to collectively pinpoint their locations in 3D and reconstruct flashes with higher resolution than has been achieved from space. A single-station approach for 3D observation of lightning would follow the method of determining altitudes of strong VHF sources that produce trans-ionospheric pulse pairs (TIPPs) while relying on an on-board high-resolution optical day/night lightning mapper for approximate horizontal flash locations. Here we present preliminary results comparing the expected data fidelity and accuracy between these methods to inform potential satellite missions like CubeSpark.

lightning↗

NASA NTRS2022

Beyond Basic Drag in Interplanetary CME Modeling: Effects of Solar Wind Pileup and High-Speed Streams

Coronal mass ejections (CMEs) cause severe space weather effects throughout our solar system. As a fast CME propagates through interplanetary space, it accumulates solar wind materials at its front. This pileup of materials, or CME-driven sheath, can be important in determining the geoeffectiveness of a CME. We take an existing arrival time model that includes expansion and deformation of the CME flux rope (ANTEATR; Kay & Gopalswamy, 2018, https://doi.org/10.1029/2018JA025780; Kay & Nieves-Chinchilla, 2021a, https://doi.org/10.1029/2020JA028911) and add a pileup procedure (PUP) as a physics-based approach to modeling the CME-driven sheath. ANTEATR-PUP solves the Rankine-Hugoniot equations for an oblique shock to determine the shock speed and sheath density, magnetic field, and temperature. The extra sheath mass affects the background drag calculation. Additionally, ANTEATR can now use any 1D profile for the background solar wind as opposed to the simple empirical models it previously relied upon. We present initial results from ANTEATR-PUP and compare with previous ANTEATR findings. Using results from an MHD simulation, we explore the effects of interactions with a static high-speed stream (HSS) on the CME's and sheath's interplanetary evolution. The drag forces essentially disappear while a CME remains within the HSS, but reappear stronger once the CME exits. The HSS-CME interaction produces the largest changes in the CME and sheath properties at 1 au when it occurs either close to the Sun near the inner simulation boundary at 0.1 au or right before the CME reaches 1 au. We estimate that these changes could significantly affect the geoeffectiveness.

C Kay↗

NASA NTRSDate not supplied

Evaluation of Acoustic Propagation in Layered Media Using Wave Confinement

A comprehensive method for propagation of sound in layered media is discussed that involves dividing the domain into two regions, source field and far field. The source field is provided using experimentally collected data from full-scale rotorcraft acoustic flight tests, which consists of short waveforms that cannot be directly simulated on the grid without numerical errors. Instead, grid based computational waves are used to carry the details of these waveforms, including amplitude, arrival time and location of origin on source sphere. This is done by solving the scalar wave equation using the Wave Confinement (WC) method, which involves adding an extra term to produce converged solutions. WC is used to study wave propagation in two different atmospheric conditions, and the results are compared to the flight test data. Overall, WC can accurately capture the propagation effects and there is a good agreement with the flight test data.

rotorcraft acoustics↗

NASA NTRS2022

Quantifying Errors in 3D CME Parameters Derived From Synthetic Data Using White-Light Reconstruction Techniques

Current efforts in space weather forecasting of CMEs have been focused on predicting their arrival time and magnetic structure. To make these predictions, methods have been developed to derive the true CME speed, size, position, and mass, among others. Difficulties in determining the input parameters for CME forecasting models arise from the lack of direct measurements of the coronal magnetic fields and uncertainties in estimating the CME 3D geometric and kinematic parameters after eruption. White-light coronagraph images are usually employed by a variety of CME reconstruction techniques that assume more or less complex geometries. This is the first study from our International Space Science Institute (ISSI) team “Understanding Our Capabilities in Observing and Modeling Coronal Mass Ejections”, in which we explore how subjectivity affects the 3D CME parameters that are obtained from the Graduated Cylindrical Shell (GCS) reconstruction technique, which is widely used in CME research. To be able to quantify such uncertainties, the “true” values that are being fitted should be known, which are impossible to derive from observational data. We have designed two different synthetic scenarios where the “true” geometric parameters are known in order to quantify such uncertainties for the first time. We explore this by using two sets of synthetic data: 1) Using the ray-tracing option from the GCS model software itself, and 2) Using 3D magnetohydrodynamic (MHD) simulation data from the Magnetohydrodynamic Algorithm outside a Sphere code. Our experiment includes different viewing configurations using single and multiple viewpoints. CME reconstructions using a single viewpoint had the largest errors and error ranges overall for both synthetic GCS and simulated MHD white-light data. As the number of viewpoints increased from one to two, the errors decreased by approximately 4° in latitude, 22° in longitude, 14° in tilt, and 10° in half-angle. Our results quantitatively show the critical need for at least two viewpoints to be able to reduce the uncertainty in deriving CME parameters. We did not find a significant decrease in errors when going from two to three viewpoints for our specific hypothetical three spacecraft scenario using synthetic GCS white-light data. As we expected, considering all configurations and numbers of viewpoints, the mean absolute errors in the measured CME parameters are generally significantly higher in the case of the simulated MHD white-light data compared to those from the synthetic white-light images generated by the GCS model. We found the following CME parameter error bars as a starting point for quantifying the minimum error in CME parameters from white-light reconstructions: Δθ (latitude)=6° +2° -3° , Δϕ (longitude)=11° +18° -6° , Δγ (tilt)=25° +8° -7° , Δx (half-angle)=10° +12° -6° , Δh (height)=0.6 +1.2 -0.4 R ⨀ , and Δκ (ratio)=0.1 +0.03 -0.02 .

Coronal mass ejections↗

NASA NTRSDate not supplied

Evaluation of Acoustic Propagation in Layered Media Using Wave Confinement

A comprehensive method for propagation of sound in layered media is discussed that involves dividing the domain into two regions, source field and far field. The source field is provided using experimentally collected data from full-scale rotorcraft acoustic flight tests, which consists of short waveforms that cannot be directly simulated on the grid without numerical errors. Instead, grid based computational waves are used to carry the details of these waveforms, including amplitude, arrival time and location of origin on source sphere. This is done by solving the scalar wave equation using the Wave Confinement (WC) method, which involves adding an extra term to produce converged solutions. WC is used to study wave propagation in two different atmospheric conditions, and the results are compared to the flight test data. Overall, WC can accurately capture the propagation effects and there is a good agreement with the flight test data.

rotorcraft acoustics↗

NASA NTRSDate not supplied

Analyzing Space Weather at Mars with MAVEN

To understand the processes driving Martian atmospheric escape to space, the MAVEN mission has been monitoring solar inputs at Mars since the spacecraft went into orbit in September 2014. MAVEN’s payload provides in situ measurements of solar wind ions and electrons, solar energetic particles, extreme ultraviolet radiation, and magnetic fields. With this comprehensive suite of instruments, the MAVEN team has monitored space weather at Mars for nearly a decade, over various parts of Solar Cycles 24 and 25. MAVEN observations have determined that space weather activity can deposit enough energy into the Martian system to enhance atmospheric escape by an order of magnitude. As the mission continues, monitoring space weather at Mars has become increasingly important to understand the Sun’s influence on the Martian environment. The MAVEN team provides regular reports of space weather activity, such as the occurrence and arrival time of coronal mass ejections as well as flare magnitude and peak times, to the Mars community when predictions suggest that a space weather-impacting event may be directed towards Mars. MAVEN provides observations of solar activity on the ‘far side’ of the Sun when Earth and Mars are near solar conjunction to augment measurements of solar observatories (e.g., SDO, STEREO, GOES, PSP, Solar Orbiter), providing a more global coverage of solar activity. Additionally, MAVEN is working closely with the Community Coordinated Modeling Center (CCMC) and the Moon to Mars (M2M) Space Weather Analysis Office, both located at NASA GSFC, to form the Mars Space Weather Collaboration. This collaboration utilizes MAVEN observations of space weather activity to facilitate model and prediction validation while creating tools that are available to the science community. These activities are in support of future human and robotic exploration as we identify needs to enhance current capabilities for analyzing space weather at Mars.

Gina A DiBraccio↗

NASA NTRSDate not supplied

RApid Blade and Blade-Vortex InTeraction (RABBIT) Reimagined: Algorithm Improvement and User-Friendly Interface Implementation

Rotorcraft noise source identification and reduction is crucial to the emergence of the Urban Air Mobility (UAM) market. One key rotor noise source is Blade Vortex Interaction (BVI), caused by the rotor blades interacting with the rotor wake. The low-fidelity RApid Blade and Blade-Vortex InTeraction (RABBIT) tool was created to predict the location and characteristics of BVI noise. RABBIT enables engineers to quickly design and simulate UAM configurations and understand BVI occurrences for a desired flight condition. Furthermore, RABBIT can also identify the time and location of blade overlap for coaxial rotors. RABBIT is not a general acoustic prediction tool, but instead utilizes vortex and wake parameters to visualize and predict BVI aerodynamics. RABBIT algorithm has been further developed including reduction of computational time, accounting for BVI source time arrival, improved vortex strength modeling, and BVI impulse factor. A user-friendly app is presented with the intent of bringing RABBIT to the masses to allow engineers from various educational backgrounds to design and begin to understand BVI. Furthermore, RABBIT capabilities are highlighted by a parameter study highlighting key parameters that impact BVIalong with highlighting RABBIT’s ability to identify BVI occurrences from other rotors.

RApid↗

NASA NTRSDate not supplied

Impacts of Non-Simultaneous Global Photospheric Magnetic Measurements on Coronal and Solar Wind Modeling

The intensity and arrival time of coronal mass ejections (CMEs) can be significantly influenced by the background solar wind encountered as they propagate outward from the Sun into the interplanetary medium. In addition, solar energetic particles (SEPs) race ahead of CME shock fronts and flare regions along magnetic field lines largely determined by the background solar wind. Predicting the solar wind accurately is therefore critical for improving forecasts of CMEs, SEPs, and high-speed streams. Modeling of the corona and solar wind is challenging in general, as it is highly dependent on global photospheric magnetic field maps, which serve as the boundary conditions to all coronal models that drive solar wind models. Unfortunately, less than half of the Sun’s photospheric magnetic field is reliably measured from any given vantage point and thus it is common for the maps to have highly dated and unreliable measurements in them. While Solar Obiter (SolO) now provides for the first time the opportunity to have simultaneous measurements of nearly the entire surface magnetic field of Sun (e.g., when SolO/PHI measurements are combined with those from SDO/HMI), the required alignment to accomplish this occurs only occasionally. Further, coronal models are extremely sensitive to the strengths of the polar magnetic fields of the Sun, which remain poorly observed. Recently, efforts to mitigate this problem include using flux transport models such as the Air Force Data Assimilative Photospheric Flux Transport (ADAPT) model, which evolves the field forward in time using well known transport processes occurring on the Sun. However, it cannot account for the emergence of new magnetic flux without direct observations. The ESA VIGIL mission will eventually provide continuous observations from the L5, and the proposed SunCHASER mission will likewise do this at the L4 vantage point should it be funded. Ultimately, what is needed is a constellation of spacecraft distributed around the Sun with magnetographs that continuously measure the global surface magnetic field. In this talk, we discuss how the lack of simultaneous global measurements of the photospheric magnetic field adversely impacts the predictive performance of coronal and solar wind models.

C. Nick Arge↗

NASA NTRSDate not supplied

3D Lightning Geolocation With the CubeSpark Constellation

The new CubeSpark mission concept is being developed as a constellation of up to six satellites for high-resolution 3D lightning mapping. Each satellite in low-Earth orbit (LEO) will use optical and radio frequency (RF) sensors to geolocate individual sources from lightning flashes. The purpose of this study is to evaluate the potential accuracies and feasibilities of RF-based geolocation methods. This is done using a robust simulation framework to accurately depict the ionosphere’s effect on propagating RF signals, using their arrival times at each station to reconstruct source locations. We identified the primary sources of error as geometric, ionospheric, and instrumental. These are each analyzed to determine their quantitative effect on geolocation uncertainty. CubeSpark’s science objectives include mapping thundercloud charge regions and even individual flash channel structure for applications across a wide range of fields from climatology to hydrology. These applications require geolocation accuracy better than 1-2 km in each dimension, thus special care must be taken to optimize constellation design, minimize the main sources of error, and maximize CubeSpark’s potential. The algorithms developed in this study show promising results, with large regions having both horizontal and vertical uncertainties less than 1 km. After the removal of the Lightning Imaging Sensor from the International Space Station, an observational gap has been left for lightning observers from LEO. It therefore becomes increasingly vital to evaluate and improve on the current state of lightning mapping to prepare for the next generation of 3D lightning geolocation.

lightning↗