SEARCH · Engineering Papers

Results for “anisotropic diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

590 records · Page 33

All sources NASA NTRS DOE OSTI

DOE OSTI2017

Controlling Oxygen Mobility in Ruddlesden–Popper Oxides

Discovering new energy materials is a key step toward satisfying the needs for next-generation energy conversion and storage devices. Among the various types of oxides, Ruddlesden–Popper (RP) oxides (A 2 BO 4 ) are promising candidates for electrochemical energy devices, such as solid oxide fuel cells, owing to their attractive physicochemical properties, including the anisotropic nature of oxygen migration and controllable stoichiometry from oxygen excess to oxygen deficiency. Thus, understanding and controlling the kinetics of oxygen transport are essential for designing optimized materials to use in electrochemical energy devices. In this review, we first discuss the basic mechanisms of oxygen migration in RP oxides depending on oxygen nonstoichiometry. We then focus on the effect of changes in the defect concentration, crystallographic orientation, and strain on the oxygen migration in RP oxides. We also briefly review their thermal and chemical stability. Finally, we conclude with a perspective on potential research directions for future investigation to facilitate controlling oxygen ion migration in RP oxides.

36 MATERIALS SCIENCE↗

DOE OSTI2017

grim: A Flexible, Conservative Scheme for Relativistic Fluid Theories

Hot, diffuse, relativistic plasmas such as sub-Eddington black-hole accretion flows are expected to be collisionless, yet are commonly modeled as a fluid using ideal general relativistic magnetohydrodynamics (GRMHD). Dissipative effects such as heat conduction and viscosity can be important in a collisionless plasma and will potentially alter the dynamics and radiative properties of the flow from that in ideal fluid models; we refer to models that include these processes as Extended GRMHD. Here we describe a new conservative code, grim, that enables all of the above and additional physics to be efficiently incorporated. grim combines time evolution and primitive variable inversion needed for conservative schemes into a single step using an algorithm that only requires the residuals of the governing equations as inputs. This algorithm enables the code to be physics agnostic as well as flexibility regarding time-stepping schemes. grim runs on CPUs, as well as on GPUs, using the same code. We formulate a performance model and use it to show that our implementation runs optimally on both architectures. grim correctly captures classical GRMHD test problems as well as a new suite of linear and nonlinear test problems with anisotropic conduction and viscosity in special and general relativity. As tests and example applications, we resolve the shock substructure due to the presence of dissipation, and report on relativistic versions of the magneto-thermal instability and heat flux driven buoyancy instability, which arise due to anisotropic heat conduction, and of the firehose instability, which occurs due to anisotropic pressure (i.e., viscosity). Finally, we show an example integration of an accretion flow around a Kerr black hole, using Extended GRMHD.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2022

Using lifetime of point defects for dislocation bias in bcc Fe

The interaction between dislocations and point defects is key to deformation processes and microstructural evolution of structural materials. In this work, we compute the lifetime of point defects to describe their interaction with dislocations. This approach can accurately account for the effects of the dislocation core and anisotropic defect dynamics to accumulatively determine the capture efficiency, sink strength, and dislocation bias at different temperatures and dislocation densities. Particularly, the absorption of point defects by straight screw and edge dislocations in a model bcc iron system is studied. The maximum swelling rates based on the obtained bias factors are in close agreement with a variety of experimental measurements, including both neutron and ion-irradiation data, especially when considering the survival fraction for point defects from displacement cascades. Further, this approach applies to many other processes and sinks, such as dislocation loops and interfaces, providing a powerful means to develop fundamental insights critical for improving radiation resistance and mechanical properties of structural materials through controlling defect interaction and evolution.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Effects of temperature and dose rate on ion-irradiated γ-LiAlO 2 pellets

Defect accumulation and microstructural evolution during ion irradiation at elevated temperatures are governed by competing processes of defect production, driven by the dose rate, and defect recovery, controlled by diffusion, interaction, and annihilation. Here, this study investigates the effects of irradiation temperature and the dose rate on microstructural evolution, deuterium retention, and lithium volatilization in γ-LiAlO 2 pellets subjected to sequential He + and D + ion irradiation. Experiments were performed to a total fluence of 3 × 10 17 (He + + D + )/cm 2 at 623, 673, 723, and 773 K with an average He + dose rate of 7.7 × 10 −4 dpa/s, and to 2 × 10 17 (He + + D + )/cm 2 at 773 K with dose rates of 6.8 × 10 −5 , 2.9 × 10 −4 , and 7.3 × 10 −4 dpa/s. At 623 K, the microstructure was dominated by cavities and fractures with no observable precipitate formation, while small precipitates emerged at 673 K. Increasing the irradiation temperature to 723–773 K promoted the formation of larger, faceted LiAl 5 O 8 precipitates, and surface amorphization, accompanied by pronounced lithium depletion and H–D isotopic exchange. At 773 K, medium and high dose rates produced an amorphized surface layer over a crystalline subsurface containing LiAl 5 O 8 precipitates and blisters at the crystalline–amorphous interface, whereas low-dose-rate irradiation preserved surface crystallinity with cavities distributed in the matrix, around precipitates, and along grain boundaries. Precipitate morphology was anisotropic with limited size dependence on the dose rate. These results elucidate the coupled effects of temperature and the dose rate and demonstrate that sequential He + and D 2 + irradiation at 773 K reproduces key microstructural features and H isotope behavior observed in neutron-irradiated γ-LiAlO 2 at 573 K.

dose rate effects↗

DOE OSTI2020

Anisotropic X-Ray Scattering of Transiently Oriented Water

We study the structural dynamics of liquid water by time-resolved anisotropic x-ray scattering under the optical Kerr effect condition. In this way, we can separate the anisotropic scattering decay of 160 fs from the delayed temperature increase of ~ 0.1 K occurring at 1 ps and quantify transient changes in the O-O pair distribution function. Polarizable molecular dynamics simulations reproduce well the experiment, indicating transient alignment of molecules along the electric field, which shortens the nearest-neighbor distances. In addition, analysis of the simulated water local structure provides evidence that two hypothesized fluctuating water configurations exhibit different polarizability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRS1994

A unifying comparison of nearly scatter free transport models

Gombosi et al. (1993) recently derived a modified telegrapher's equation for charged particle transport under the influence of isotropic scattering. This equation obeys causality and disallows upstream diffusion for particles with random velocities smaller than the bulk flow velocity. The acausal diffusion equation was obtained to lowest order in the expansion of smallness prameters. The paper by Gombosi et al. (1993) prompted responses from Pauls et al. (1993) and Earl (1993). This paper is written to explain the differences between the methods, assumptions, and results of Gombosi et al. (1993), Pauls et al. (1993), and Earl (1993) and presents a new method of obtaining approximate solutions. It is shown that the assumptions used by Gombosi et al. (1993) and Pauls et al. (1993) are physically equivalent. In our solution method, the solution of the modified telegrapher's equation is obtained as the casual limit of solutions accurate to second order in the smallness parameter expansion. In order to investigate the coherent velocity, we have also developed `wavenumber eigenfunctions' which account for all the pitch angle dependence in our Boltzmann equation. Using truncation, Earl (1993) obtains approximations for the wavenumber dependence of the lowest two frequency modes, which correspond to two of the wavenumber eigenmodes. We find that a consequence of including only two wavenumber eigenmodes is that one obtains solutions which disobey causality at sufficiently short times. Furthermore, the coherent velocity of the two eigenmodes is strongly dependent on wavenumber and approaches the particle velocity in the limit of large wavenumber for both isotropic and anisotropic scattering processes. We conclude that Earl's (1993) solutions and solutions obtained using the new solution method implicitly assume weak acausality and reasonable behavior in the temporal regime, t less than 4 tau. The solutions are not strictly consistent with the behavior of the lowest two frequency modes but have similar behavior in the regime of low wavenumber.

Schwadron, N. A.↗

DOE OSTI2015

Effects of electrons on the electromagnetic ion cyclotron instability: Solar wind implications

In diffuse plasmas in space, particle–particle collisions are rare and inefficient, such that a plausible mechanism for constraining the temperature anisotropy of plasma particles may be provided by the resulting instabilities. The implication of the electromagnetic ion-cyclotron (EMIC) instability in the solar wind is still unclear because this instability is fast enough to relax the proton temperature anisotropy, but the 1 AU measurements do not conform to the instability thresholds predicted by the existing theories, which ignore the kinetic effects of electrons, assuming them to be isotropic. This paper presents a refined analysis of the EMIC instability in the presence of a temperature (T) anisotropy of electron (subscript “e”) population, i.e., A{sub e}=T{sub e,⊥}/T{sub e,∥}≠1, enabling the identification of two distinct regimes of this instability that correspond to an excess of perpendicular temperature (A{sub e}>1) or an excess of parallel temperature (A{sub e}<1). The growth rates, real frequencies, and threshold conditions are found to be highly sensitive to the electron temperature anisotropy, and electrons with A{sub e}>1 inhibit the instability, while for A{sub e}<1 the instability growth rates increase with the electron anisotropy. Moreover, the electron–proton temperature ratio θ{sub T}=T{sub e,∥}/T{sub p,∥} becomes an important factor that stimulates the effect of the anisotropic electrons. The potential relevance of the new results in the solar wind is analyzed by contrasting the instability thresholds with the observed limits of the proton temperature anisotropy.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2013

Propagation and dispersion of whistler waves generated by fast reconnection onset

The role of whistler mode during the onset of magnetic reconnection (MR) has been widely suggested, but the manifestations of its highly dispersive and anisotropic propagation properties in reconnection events remain largely unclear. Comparing results from a recently developed theoretical model for reconnection in terms of whistler's dispersive behavior with those reported from laboratory experiments on fast spontaneous magnetic reconnection, we demonstrate that the onset of fast reconnection in electron current layers (ECLs) emits whistler wave packets. The time scale of the explosively fast reconnection events are inversely related to the whistler mode frequencies at the lower end of the whistler frequency band. The wave packets in this frequency band have a characteristic angular dispersion, which marks the initial opening of the reconnection exhaust angle. The multidimensional propagation of the whistler for the reconnection with a strong guide magnetic field is investigated, showing that the measured propagation velocities of the reconnection electric field along the guide field in the Versatile Toroidal Facility at MIT quantitatively compare with the group velocities of the whistler wave packets. The whistler mode dispersive properties measured in laboratory experiments without a guide magnetic field in the magnetic reconnection experiments at Princeton also compare well with the theoretically predicted dispersion of the wave packets depending on the ECL width. Fast normalized reconnection rates extending to {approx}0.35 at the MR onset in thin ECLs imply whistler wave propagation away from the onset location. We also present evidences for the whistler wave packets being emitted from reconnection diffusion region as seen in simulations and satellite observations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2022

Cooling rate and dendrite spacing control in direct metal deposition printed Cu-Fe alloys

Over the last several decades, additive manufacturing (AM) has been primarily used for rapid prototyping or to create novel geometries that would be difficult or impossible to create by normal manufacturing methods. More recently, research has been focused on expanding the list of materials that can be made through additive manufacturing, opening a greater range of material properties for this manufacturing method. Due to the unusual conditions during AM, including the high cooling rates and voxel by voxel method of production, AM parts often have anisotropic material microstructures and properties. In this investigation, the laser power, composition, and nozzle head speed during direct metal deposition of copper-iron alloys was varied to understand how the grain structure within the printed parts could be changed and controlled. The resulting dendrite spacing was measured and compared to calculated cooling rates from Gaussian beams on flat plates under similar material and laser properties, which resulted in a cooling rate to dendrite spacing relationship following an inverse square root, as is found in other dendritic systems [Young and Kerkwood, Metall. Trans. A 6, 197–205 (1975)]. Thus, it is demonstrated that in the Cu-Fe system, dendrite spacing can be controlled through manipulation of printing parameters.

36 MATERIALS SCIENCE↗

DOE OSTI2015

Directing Anisotropic Assembly of Metallic Nanoclusters by Exploiting Linear Trio Interactions and Quantum Size Effects: Au Chains on Ag(100) Thin Films

Discovery and understanding of mechanisms for kinetically controlled growth of metal nanoclusters can be enabled by realistic atomistic-level modeling with ab initio kinetics. KMC simulation of such a model for Au deposition on Ag(100) films reveals the formation of single-atom-wide Au chains below 275 K, even though 2D islands are thermodynamically preferred. Chain formation is shown to reflect a combination of strong linear trio attractions guiding assembly and a weak driving force and slow rate of transformation of 1D chains to 2D islands (or sometimes irreversible rounding of adatoms from chain sides to ends). Behavior can also be tuned by quantum size effects: chain formation predominates on 2-monolayer Ag(100) films supported on NiAl(100) at 250 K for low coverages but not on 1- or 3-monolayer films, and longer chains form than on bulk Ag(100). Finally, our predictive kinetic modeling shows the potential for simulation-guided discovery and analysis of novel self-assembly processes.

ab initio periphery diffusion kinetics↗

DOE OSTI2015

Anisotropy in thermal conductivity of graphite flakes–SiC{sub p}/matrix composites: Implications in heat sinking design for thermal management applications

Within the frame of heat dissipation for electronics, a very interesting family of anisotropic composite materials, fabricated by liquid infiltration of a matrix into preforms of oriented graphite flakes and SiC particles, has been recently proposed. Aiming to investigate the implications of the inherent anisotropy of these composites on their thermal conductivity, and hence on their potential applications, materials with matrices of Al–12 wt.% Si alloy and epoxy polymer have been fabricated. Samples have been cut at a variable angle with respect to the flakes plane and thermal conductivity has been measured by means of two standard techniques, namely, steady state technique and laser flash method. Experimental results are presented and discussed in terms of current models, from which important technological implications for heat sinking design can be derived. - Highlights: • Anisotropy in thermal conductivity of graphite flakes-based composites is evaluated. • Samples are cut in a direction forming a variable angle with the oriented flakes. • For angles 0° and 90°, thermal conductivity does not depend on sample geometry. • For intermediate angles, thermal conductivity strongly depends on sample geometry. • “Thin” samples must be thicker than 600 μm, “thick” samples must be encapsulated.

36 MATERIALS SCIENCE↗

DOE OSTI2018

Atomic-scale understanding of the electronic structure-crystal facets synergy of nanopyramidal CoPi/BiVO 4 hybrid photocatalyst for efficient solar water oxidation

The observation of a spontaneous electron enrichment at the apexes of bismuth vanadate (BiVO 4 ) nanopyramidal arrays is achieved by performing synchrotron-based angular dependent X-ray absorption spectroscopy. In accordance with density function theory calculations, the formation of (112) facets enriched apexes is proposed. Such intrinsically electron-enriched (112) facets at the apexes produce a potential facilitating the diffusion of photoexcited holes, which not only mitigates the recombination with the photoexcited electrons, but also provide an active reaction site for the photoassisted selective growth of cobalt phosphate (CoPi), a well known and highly active co-catalyst for water oxidation at the apex of BiVO 4 nanopyramids. Benefiting from the element-resolved properties of synchrotron-based X-ray spectroscopy, 3d electrons on the vanadium site are directly resolved by resonant inelastic X-ray scattering measurements. Due to this unique morphology, the charge at the apex is expected to induce a strong interaction with CoPi, as a result of the metal-to-ligand charge transfer spectroscopy feature observed from the cobalt site. Substantial evidences are collected by means of comprehensive soft X-ray spectroscopy techniques with high spectral resolution revealing the atomic-scale origin and the nature of the synergy as well as the strong correlation between its unique structural properties and the electronic structure of this novel highly-ordered hybrid photocatalyst and its significantly improved photoelectrochemical performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2015

Double-Diffusive Convection During Growth of Halides and Selenides

Heavy metal halides and selenides have unique properties which make them excellent materials for chemical, biological and radiological sensors. Recently it has been shown that selenohalides are even better materials than halides or selenides for gamma-ray detection. These materials also meet the strong needs of a wide band imaging technology to cover ultra-violet (UV), midwave infrared wavelength (MWIR) to very long wavelength infrared (VLWIR) region for hyperspectral imager components such as etalon filters and acousto-optic tunable filters (AO). In fact AOTF based imagers based on these materials have some superiority than imagers based on liquid crystals, FTIR, Fabry-Perot, grating, etalon, electro-optic modulation, piezoelectric and several other concepts. For example, broadband spectral and imagers have problems of processing large amount of information during real-time observation. Acousto-Optic Tunable Filter (AOTF) imagers are being developed to fill the need of reducing processing time of data, low cost operation and key to achieving the goal of covering long-wave infrared (LWIR). At the present time spectral imaging systems are based on the use of diffraction gratings are typically used in a pushbroom or whiskbroom mode. They are mostly used in systems and acquire large amounts of hyperspectral data that is processed off-line later. In contrast, acousto-optic tunable filter spectral imagers require very little image processing, providing new strategies for object recognition and tracking. They are ideally suited for tactical situations requiring immediate real-time image processing. But the performance of these imagers depends on the quality and homogeneity of acousto-optic materials. In addition for many systems requirements are so demanding that crystals up to sizes of 10 cm length are desired. We have studied several selenides and halide crystals for laser and AO imagers for MWIR and LWIR wavelength regions. We have grown and fabricated crystals of several materials such as mercurous chloride, mercurous bromide, mercurous iodide, lead chloride lead bromide, lead iodide, thallium arsenic selenide, gallium selenide, zince sulfide zinc selenide and several crystals into devices. We have used both Bridgman and physical vapor transport (PVT) crystal growth methods. In the past have examined PVT growth numerically for conditions where the boundary of the enclosure is subjected to a nonlinear thermal profile. Since past few months we have been working on binary and ternary materials such as selenoiodides, doped zinc sulfides and mercurous chloro bromide and mercurous bromoiodides. In the doped and ternary materials thermal and solutal convection play extremely important role during the growth. Very commonly striations and banding is observed. Our experiments have indicated that even in highly purified source materials, homogeneity in 1-g environment is very difficult. Some of our previous numerical studies have indicated that gravity level less than 10-4 (-g) helps in controlling the thermosolutal convection. We will discuss the ground based growth results of HgClxBr(1-x) and ZnSe growth results for the mm thick to large cm size crystals. These results will be compared with our microgravity experiments performed with this class of materials. For both HgCl-HgBr and ZnS-ZnSe the lattice parameters of the mixtures obey Vagard's law in the studied composition range. The study demonstrates that properties are very anisotropic with crystal orientation, and performance achievement requires extremely careful fabrication to utilize highest figure of merit. In addition, some parameters such as crystal growth fabrication, processing time, resolution, field of view and efficiency will be described based on novel solid solution materials. It was predicted that very similar to the pure compounds solid solutions also have very large anisotropy, and very precise oriented and homogeneous bulk and thin film crystals is required to achieve maximum performance of laser or imagers. Some of the parameters controlling the homogeneity such as thermos-solutal convection driven forces can be controlled in microgravity environments to utilize the benefits of these unique materials.

Singh, N. B.↗

DOE OSTI2023

Solute effects upon dislocation motion and recovery in Mg alloys (Final Report)

The objective the research was to develop a firmer understanding of the interactions between substitutional solute atoms and dislocations within Mg alloys. These interactions govern the absolute and relative mobilities of various types of dislocations in Mg (e.g., basal < a>, non-basal < a>, and pyramidal < c+a>). Furthermore, they have an impact on dislocation recovery processes (e.g., cross-glide, climb, rearrangement, and annihilation). Ultimately, solute-dislocation interactions strongly impact a) strain hardening, b) strain rate sensitivity, c) plastic anisotropy of textured polycrystals, d) texture evolution, e) dislocation substructures evolution, and even f) recrystallization behavior. It is broadly known that Mg alloys exhibit poor low temperature formability. Since formability is largely governed by properties (a) – (c) in this list, it is critical to develop a better understanding of solute-dislocation interactions, if one hopes to improve the situation. While the theory of static solute strengthening is well developed, especially for alloys with face centered cubic (FCC) crystal structures, there are outstanding questions related to applications to hexagonal close packed (HCP) crystal structures and dynamic strain aging (DSA) in materials of various structures. DSA has far-reaching implications for metal formability and, in the case of Mg alloys, appears to correlate with the so-called rare-earth (RE) texture which has been shown to benefit formability. The Portevin-Le Chatelier (PLC) effect, and associated negative strain rate sensitivity, occur at higher temperatures (>100℃) in Mg alloys as compared with similar Al alloys, even though they have similar melting points and solute diffusivities. Our preliminary research has shown that modern, physics-based models of DSA can be tuned to describe the behavior of Mg alloys if a rather higher activation enthalpy is assumed for cross-core diffusivity. While this partially explains the delay in DSA to higher temperatures, it is also hypothesized that this delay is due in part to the intrinsically more thermally activated (rate sensitive) nature of non-basal < a> dislocation motion which is required for macroscopic flow of Mg alloys, whereas octahedral slip in many FCC metals like aluminum is essentially athermal at room temperature. It was originally proposed to employ a combination of in-situ diffraction-based experimental characterization to validate existing theory. It was envisioned to perform in-situ transmission electron microscopy (TEM) to assess individual dislocation behavior and in-situ high-energy X-ray diffraction (HEXRD) techniques which were showing great promise for elucidating collective dislocation behavior, 2 including recovery, especially if the contributions to various forms of diffraction peak broadening (𝜂𝜂,𝜔𝜔,and 2𝜃𝜃) can be effectively integrated. Finally, it was envisioned to perform discrete dislocation dynamics (DDD) modeling approaches to aide in the interpretation of both TEM and HEXRD experiments. In the end, mechanical tests were performed on more complex Mg alloys which exhibited evidence of dynamic strain aging, and this led to the establishment of another project. Mechanical test data obtained at McMaster University served as the basis of an assessment of the applicability of Bazinski’s “stress equivalence” theory of solute strengthening to polycrystalline alloys of Mg. Although we did not succeed in applying the approach to Mg alloys, we did develop expertise with the HEXRD approach using a BCC, β-Ti alloy and demonstrated numerous new capabilities that may be applied to any polycrystalline material in collaboration with researchers at CHESS and around the world: (1) assessment of details of the elastoplastic transition (yielding) using a combination of HEXRD and full-field polycrystal plasticity modeling, (2) the first-ever experimental observation of strong stress rotation within the individual grains of a polycrystalline material, and (3) a comprehensive analysis of the grain-level dislocation density evolution based upon diffraction peak broadening along 𝜂𝜂,𝜔𝜔,and 2𝜃𝜃 directions. This final aspect allowed us to confirm that dislocations were gliding on multiple plane types and not restricted to {110} type planes, and it also provided clues as to why some grains were unloading during straining, with surprising implications for our understanding of the effects of geometrically necessary dislocations (GNDs). Finally, graduate student, Mohammed Shabana, developed a MATLAB code which confirmed the conclusions of Prof. Catalin Picu (Rensallear Polytechnic Institute, RPI) regarding the effect of solute-trapped, forest dislocations on the breaking stress of Lomer lock junctions in FCC metal alloys. He applied the same anisotropic line-tension model to a variety of dislocation junction configurations and found an inconsistency in the widely cited results of Dupuy and Fivel regarding the Hirth Lock, and he outlined an approach to extend these finding to HCP Mg alloys that we are still pursuing with discretionary fundings at UVA.

36 MATERIALS SCIENCE↗