Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “aerosol scattering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

The change of depolarization of backscattering light from the polar stratospheric aerosol layer

The change of polarization properties of scattered light strongly depends on the non-spherisity of target particles. It should be helpful information for the study of stratospheric aerosols to know the non-spherisity of stratospheric aerosol particles. The change of the total backscatter depolarization ratio of the stratospheric aerosol layer measured at Syowa Station (69.00 deg S, 39.35 deg E), Antarctica is described.

Iwasaka, Y.↗

Global Retrieval of Aerosol Properties over Desert and Semi-Desert Regions from SeaWiFS and MODIS

Mineral aerosols (dust) play an important role in both climate forcing and oceanic productivity throughout the entire year. Due to the relatively short lifetime (a few hours to about a week), the distributions of these airborne dust particles vary extensively in both space and time. Consequently, satellite observations are needed over both source and sink regions for continuous temporal and spatial sampling of dust properties. However, despite their importance, the high spatial resolution satellite measurements of dust near its source have been lacking. In this paper, we will demonstrate the capability of a new satellite algorithm to retrieve aerosol optical thickness and single scattering albedo over bright-reflecting surfaces such as urban areas and deserts. Such retrievals have been difficult to perform using previously available algorithms that use wavelengths from the mid-visible to the near IR because they have trouble separating the aerosol signal from the contribution due to the bright surface reflectance. The new algorithm, called Deep Blue, utilizes blue-wavelength measurements from instruments such as SeaWiFS and MODIS to infer the properties of aerosols, sinre the stirfare reflectance nver land in the blue part of the spectrum is much lower than for longer wavelength channels. We have validated the satellite retrieved aerosol optical thickness with data from AERONET sunphotometers over desert and semi-desert regions. The comparisons show reasonable agreements between these two. These new satellite products will allow scientists to determine quantitatively the aerosol properties near sources using high spatial resolution measurements from SeaWiFS and MODIS-like instruments.

Hsu, Nai-Yung↗

Global Retrieval of Aerosol Properties from Sources to Sinks By MODIS

Mineral dust and smoke aerosols play an important role in both climate forcing and oceanic productivity throughout the entire year. Due to the relatively short lifetime (a few hours to about a week), the distributions of these airborne particles vary extensively in both space and time. Consequently, satellite observations are needed over both source and sink regions for continuous temporal and spatial sampling of dust and smoke properties. However, despite their importance, the high spatial resolution satellite measurements of these aerosols near their sources have been lacking, In this paper, we will demonstrate the capability of a new satellite algorithm to retrieve aerosol optical thickness and single scattering albedo over bright-reflecting surfaces such as urban areas and deserts. Such retrievals have been difficult to perform using previously available algorithms that use wavelengths from the mid-visible to the near IR because they have trouble separating the aerosol signal from the contribution due to the bright surface reflectance. The new algorithm, called Deep Blue, utilizes blue-wavelength measurements from instruments such as MODIS and SeaWiFS to infer the properties of aerosols, since the surface reflectance over land in the blue part of the spectrum is much lower than for longer wavelength channels. We have validated the satellite retrieved aerosol optical thickness with data from AERONET sunphotometers over land, including desert and semi-desert regions. The comparisons show reasonable agreements between these two. Our results show that the dust plumes lifted from the deserts near India/Pakistan border, and over Afghanistan, and the Arabian Peninsula are often observed by MODIS to be transported along the Indo-Gangetic Basin and mixed with the fine mode pollution particles generated by anthropogenic activities in this region, particularly during the pre-monsoon season (April-May). These new satellite products will allow scientists to determine quantitatively the aerosol properties near sources using high spatial resolution measurements from SeaWiFS and MODIS-like instruments.

Hsu, N. Christina↗

10 Years of Asian Dust Storm Observations from SeaWiFS: Source, Pathway, and Interannual Variability

In this paper, we will demonstrate the capability of a new satellite algorithm to retrieve aerosol optical thickness and single scattering albedo over bright-reflecting surfaces such as urban areas and deserts. Such retrievals have been difficult to perform using previously available algorithms that use wavelengths from the mid-visible to the near IR because they have trouble separating the aerosol signal from the contribution due to the bright surface reflectance. The new algorithm, called Deep Blue, utilizes blue-wavelength measurements from instruments such as SeaWiFS and MODIS to infer the properties of aerosols, since the surface reflectance over land in the blue part of the spectrum is much lower than for longer wavelength channels. We have validated the satellite retrieved aerosol optical thickness with data from AERONET sunphotometers over desert and semi-desert regions. The comparisons show reasonable agreements between these two. These new satellite products will allow scientists to determine quantitatively the aerosol properties near sources using high spatial resolution measurements from SeaWiFS and MODIS-like instruments. The multiyear satellite measurements (1998 - 2007) from SeaWiFS will be utilized to investigate the interannual variability of source, pathway, and dust loading associated with these dust outbreaks in East Asia. The monthly averaged aerosol optical thickness during the springtime from SeaWiFS will also be compared with the MODIS Deep Blue products.

Hsu, N. Christina↗

Satellite Monitoring of Asian Dust Storms from SeaWiFS and MODIS: Source, pathway and Interannual Variability

Among the many components that contribute to air pollution, airborne mineral dust plays an important role due to its biogeochemical impact on the ecosystem and its radiative-forcing effect on the climate system. In East Asia, dust storms frequently accompany the cold and dry air masses that occur as part of springtime cold front systems. China's capital, Beijing, and other large cities are on the primary pathway of these dust storm plumes, and their passage over such population centers causes flight delays, pushes grit through windows and doors, and forces people indoors. Furthermore, during the spring these anthropogenic and natural air pollutants, once generated over the source regions, can be transported out of the boundary layer into the free troposphere and can travel thousands of kilometers across the Pacific into the United States and beyond. In this paper, we will demonstrate the capability of a new satellite algorithm to retrieve aerosol optical thickness and single scattering albedo over bright-reflecting surfaces such as urban areas and deserts. Such retrievals have been difficult to perform using previously available algorithms that use wavelengths from the mid-visible to the near IR because they have trouble separating the aerosol signal from the contribution due to the bright surface reflectance. The new algorithm, called Deep Blue, utilizes blue-wavelength measurements from instruments such as SeaWiFS and MODIS to infer the properties of aerosols, since the surface reflectance over land in the blue part of the spectrum is much lower than for longer wavelength channels. We have validated the satellite retrieved aerosol optical thickness with data from AERONET sunphotometers over desert and semi-desert regions. The comparisons show reasonable agreements between these two. These new satellite products will allow scientists to determine quantitatively the aerosol properties near sources using high spatial resolution measurements from SeaWiFS and MODIS-like instruments. The multiyear satellite measurements since 1998 from SeaWiFS will be utilized to investigate the interannual variability of source, pathway, and dust loading associated with these dust outbreaks in East Asia. The monthly averaged aerosol optical thickness during the springtime from SeaWiFS will also be compared with the MODIS Deep Blue products.

Hsu, N. Christina↗

A14H-04 Analysis of Simulated and Observed Trends in Global Surface PM2.5 and Aerosol Optical Properties from 1958 to 2018 Using the NASA GEOSCCM

Modeling of long-term trends of aerosols and their properties is important for constraining aerosol-climate forcing, and for characterizing changes in particulate matter pollution speciation and exposure. Here we study global and regional long-term trends in surface fine particulate matter (PM ) and aerosol optical properties for 60 years from 1958 to 2018, using simulations performed with the NASA Goddard Earth Observing System Chemistry Climate Model (GEOSCCM), and evaluate the model hindcast with observations for the last three decades. Comparing the modeled aerosols with a diverse set of observations helps interpret observed and simulated trends, and serves as a benchmark for future GEOSCCM developments and input datasets improvements. We first characterize modeled global and regional temporal changes in surface PM and its components, aerosol optical depth (AOD) and single scattering albedo (SSA) and we interpret their link with emissions drivers. We then compare modeled surface PM with ground-based observations from monitoring networks and with global reconstructed PM datasets from observations-model data fusion. Total AOD is compared with long-term satellite measurements from the Moderate Resolution Imaging Spectroradiometer (MODIS) and measurements from the ground-based Aerosol Robotic Network (AERONET). Additional aerosol optical properties, such as absorption and scattering coefficients, are evaluated with ground-based observations from the Global Atmosphere Watch (GAW) records.

aerosols↗

Characterizing degraded visual environments with scanning lenses to improve contrast recovery

Atmospheric aerosols, such as fog and smoke, degrade optical signals via the scattering and absorption of light, making it difficult to recover information from the surrounding environment. Here, we present a technique that measures the angular distribution of light in scattering environments to help recover these degraded optical signals. This is done by passing a collimated beam through the aerosol environment and collecting the scattered and unscattered light with an f-theta scan lens. The lens transforms the angular distribution of the scattered light into the linear domain, mapping the collected light onto a detector. The measured angular scattering distribution is then used to estimate the point spread function of the environment at an arbitrary stand-off distance. This point spread function can be used to deconvolve images blurred by the aerosol environment in which the angular scattering distribution was initially measured. With this approach, we demonstrate improvements in the effective resolution of deblurred images up to 26% over a 120-cm stand-off distance. Experimentation was performed in the Sandia National Laboratories tabletop fog chamber, a platform that generates aerosol environments analogous to real-world fogs. We intend to leverage this technique in future work to develop a low-SWaP system for the in situ characterization of aerosol environments.

Aerosols↗

Abstracts of papers presented at the Eleventh International Laser Radar Conference

Abstracts of 39 papers discuss measurements of properties from the Earth's ocean surface to the mesosphere, made with techniques ranging from elastic and inelastic scattering to Doppler shifts and differential absorption. Topics covered include: (1) middle atmospheric measurements; (2) meteorological parameters: temperature, density, humidity; (3) trace gases by Raman and DIAL techniques; (4) techniques and technology; (5) plume dispersion; (6) boundary layer dynamics; (7) wind measurements; visibility and aerosol properties; and (9) multiple scattering, clouds, and hydrometers.

Source record↗

Absorption Properties of Mediterranean Aerosols Obtained from Multi-year Ground-based and Satellite Remote Sensing Observations

Aerosol absorption properties are of high importance to assess aerosol impact on regional climate. This study presents an analysis of aerosol absorption products obtained over the Mediterranean Basin or land stations in the region from multi-year ground-based AERONET and satellite observations with a focus on the Absorbing Aerosol Optical Depth (AAOD), Single Scattering Albedo (SSA) and their spectral dependence. The AAOD and Absorption Angstrom Exponent (AAE) data set is composed of daily averaged AERONET level 2 data from a total of 22 Mediterranean stations having long time series, mainly under the influence of urban-industrial aerosols and/or soil dust. This data set covers the 17 yr period 1996-2012 with most data being from 2003-2011 (approximately 89 percent of level-2 AAOD data). Since AERONET level-2 absorption products require a high aerosol load (AOD at 440 nm greater than 0.4), which is most often related to the presence of desert dust, we also consider level-1.5 SSA data, despite their higher uncertainty, and filter out data with an Angstrom exponent less than 1.0 in order to study absorption by carbonaceous aerosols. The SSA data set includes both AERONET level-2 and satellite level-3 products. Satellite-derived SSA data considered are monthly level 3 products mapped at the regional scale for the spring and summer seasons that exhibit the largest aerosol loads. The satellite SSA dataset includes the following products: (i) Multi-angle Imaging SpectroRadiometer (MISR) over 2000-2011, (ii) Ozone Monitoring Instrument (OMI) near-UV algorithm over 2004-2010, and (iii) MODerate resolution Imaging Spectroradiometer (MODIS) Deep-Blue algorithm over 2005-2011, derived only over land in dusty conditions. Sun-photometer observations show that values of AAOD at 440 nm vary between 0.024 +/- 0.01 (resp. 0.040 +/- 0.01) and 0.050 +/- 0.01 (0.055 +/- 0.01) for urban (dusty) sites. Analysis shows that the Mediterranean urban-industrial aerosols appear "moderately" absorbing with values of SSA close to approximately 0.94-0.95 +/- 0.04 (at 440 nm) in most cases except over the large cities of Rome and Athens, where aerosol appears more absorbing (SSA approximately 0.89-0.90 +/- 0.04). The aerosol Absorption Angstrom Exponent (AAE, estimated using 440 and 870 nm) is found to be larger than 1 for most sites over the Mediterranean, a manifestation of mineral dust (iron) and/or brown carbon producing the observed absorption. AERONET level-2 sun-photometer data indicate the existence of a moderate East-West gradient, with higher values over the eastern basin (AAEEast. = 1.39/AAEWest. = 1.33) due to the influence of desert dust. The North-South AAE gradient is more pronounced, especially over the western basin. Our additional analysis of AERONET level-1.5 data also shows that organic absorbing aerosols significantly affect some Mediterranean sites. These results indicate that current climate models treating organics as nonabsorbing over the Mediterranean certainly underestimate the warming effect due to carbonaceous aerosols. A~comparative analysis of the regional SSA variability has been attempted using satellite data. OMI and MODIS data show an absorbing zone (SSA approximately 0.90 at 470-500 nm) over Northeastern Africa that does not appear in the MISR retrievals. In contrast, MISR seems able to observe the East-West SSA gradient during summer, as also detected by AERONET. Also, the analysis of SSA provided by satellites indicates that the aerosol over the Mediterranean Sea appears less absorbing during spring (MAM) than summer (JJA).

satellite remote sensing observations↗

Airborne Aerosol Closure Studies During PRIDE

The Puerto Rico Dust Experiment (PRIDE) was conducted during June/July of 2000 to study the properties of Saharan dust aerosols transported across the Atlantic Ocean to the Caribbean Islands. During PRIDE, the NASA Ames Research Center six-channel (380 - 1020 nm) airborne autotracking sunphotometer (AATS-6) was operated aboard a Piper Navajo airplane alongside a suite of in situ aerosol instruments. The in situ aerosol instrumentation relevant to this paper included a Forward Scattering Spectrometer Probe (FSSP-100) and a Passive Cavity Aerosol Spectrometer Probe (PCASP), covering the radius range of approx. 0.05 to 10 microns. The simultaneous and collocated measurement of multi-spectral aerosol optical depth and in situ particle size distribution data permits a variety of closure studies. For example, vertical profiles of aerosol optical depth obtained during local aircraft ascents and descents can be differentiated with respect to altitude and compared to extinction profiles calculated using the in situ particle size distribution data (and reasonable estimates of the aerosol index of refraction). Additionally, aerosol extinction (optical depth) spectra can be inverted to retrieve estimates of the particle size distributions, which can be compared directly to the in situ size distributions. In this paper we will report on such closure studies using data from a select number of vertical profiles at Cabras Island, Puerto Rico, including measurements in distinct Saharan Dust Layers. Preliminary results show good agreement to within 30% between mid-visible aerosol extinction derived from the AATS-6 optical depth profiles and extinction profiles forward calculated using 60s-average in situ particle size distributions and standard Saharan dust aerosol refractive indices published in the literature. In agreement with tendencies observed in previous studies, our initial results show an underestimate of aerosol extinction calculated based on the in situ size distributions relative to the extinction obtained from the sunphotometer measurements. However, a more extensive analysis of all available AATS-6 and in situ size distribution data is necessary to ascertain whether the preliminary results regarding the degree of extinction closure is representative of the entire range of dust conditions encountered in PRIDE. Finally, we will compare the spectral extinction measurements obtained in PRIDE to similar data obtained in Saharan dust layers encountered above the Canary Islands during ACE-2 (Aerosol Characterization Experiment) in July 1997. Thus, the evolution of Saharan dust spectral properties during its transport across the Atlantic can be investigated, provided the dust origin and microphysical properties are found to be comparable.

Redemann, Jens↗

Climatological Aspects of the Optical Properties of Fine/Coarse Mode Aerosol Mixtures

Aerosol mixtures composed of coarse mode desert dust combined with fine mode combustion generated aerosols (from fossil fuel and biomass burning sources) were investigated at three locations that are in and/or downwind of major global aerosol emission source regions. Multiyear monitoring data at Aerosol Robotic Network sites in Beijing (central eastern China), Kanpur (Indo-Gangetic Plain, northern India), and Ilorin (Nigeria, Sudanian zone of West Africa) were utilized to study the climatological characteristics of aerosol optical properties. Multiyear climatological averages of spectral single scattering albedo (SSA) versus fine mode fraction (FMF) of aerosol optical depth at 675 nm at all three sites exhibited relatively linear trends up to 50% FMF. This suggests the possibility that external linear mixing of both fine and coarse mode components (weighted by FMF) dominates the SSA variation, where the SSA of each component remains relatively constant for this range of FMF only. However, it is likely that a combination of other factors is also involved in determining the dynamics of SSA as a function of FMF, such as fine mode particles adhering to coarse mode dust. The spectral variation of the climatological averaged aerosol absorption optical depth (AAOD) was nearly linear in logarithmic coordinates over the wavelength range of 440-870 nm for both the Kanpur and Ilorin sites. However, at two sites in China (Beijing and Xianghe), a distinct nonlinearity in spectral AAOD in logarithmic space was observed, suggesting the possibility of anomalously strong absorption in coarse mode aerosols increasing the 870 nm AAOD.

Eck, T. F.↗

The Turning Point of the Aerosol Era

Over the CMIP6 historical period (1850–2014), aerosols provided the largest negative forcing compared to all other climate forcings via their ability to absorb or scatter solar radiation and alter clouds. Aerosols played an important role in counterbalancing warming by greenhouse gases (GHGs). Here we study aerosol forcing trends in the CMIP6 simulations of the NASA Goddard Institute for Space Studies (GISS) ocean-atmosphere ModelE version 2.1 (GISS-E2.1-G) using a fully coupled atmospheric composition configuration, including interactive gas-phase chemistry, and either an aerosol microphysical (MATRIX) or a mass-based aerosol (OMA) module. Simulations of the CMIP6 historical period are analyzed as well as four Shared Socioeconomic Pathway (SSP) future scenarios for 2015–2100: SSP1-2.6, SSP2-4.5, SSP3-7.0, and SSP5-8.5. The main conclusion of this study is that aerosol forcing in the GISS model has reached its turning point, switching from globally increasing to a decreasing trend in the first decade of the 21st century. This result is robust, independent of which aerosol module or SSP scenario is used. Non-linear aerosol-cloud interactions dominate as a forcing agent over aerosol-radiation interactions. Aerosols' ability to counterbalance GHG forcing on the global scale is today at a level comparable to that at the beginning of the last century. In the 1980s, the decade of largest global aerosol loads, aerosols balanced up to 80% of GHG forcing. As a consequence, global warming of the last decades, which is primarily driven by greenhouse gases, has been augmented by the effect of decreasing aerosol cooling in our model. By the end of this century, following the SSP scenarios, aerosols will only counterbalance 0%–20% of GHG forcing, depending on model and on scenario.

Aerosol forcing↗

Evolution of the Pinatubo volcanic aerosol column above Pasadena, California observed with a mid-infrared backscatter lidar

The evolution of the volcanic debris plume originating from the June 1991 eruption of Mt. Pinatubo has been monitored since its genesis using a ground-based backscatter lidar facility sited at the Jet Propulsion Laboratory (JPL). Both absolute and relative pre- and post-Pinatubo backscatter observations are in accord with Mie scattering projections based on measured aerosol particle size distributions reported in the literature. The post-Pinatubo column-integrated backscatter coefficient peaked approximately 400 days after the eruption, and the observed upper boundary of the aerosol column subsided at a rate of approximately 200 m/mon.

Tratt, David M.↗

Aerosols Optical and Radiative Properties in Indonesia Based on AERONET Version 3

Heterogeneity in seasonal aerosol types due to different sources, local characteristics, and meteorology lead to different optical and radiative properties from one place to another. This study analyzes the long-term averages of aerosol optical and radiative properties obtained by the Aerosol Robotic Network (AERONET) version 3 at four sites in Indonesia representing fire prone areas (Palangka Raya, Pontianak, Jambi: 2012–2020), and urban-industrial (Bandung: 2009–2018). We examined the seasonal variation of aerosol optical depth (AOD), Angstrom Exponent (AE), Precipitable Water Vapor (PWV), and Single Scattering Albedo (SSA) combined with meteorological parameters at these Indonesian sites. Multiple clustering techniques from different relationships among various aerosol optical and radiative parameters was employed to further study the aerosol type in respect to different seasonality. The results exhibited a distinct seasonal pattern at all sites except Bandung, whereas AOD increased owing to forest and peat fire outbreaks during the dry season. The trend in AOD annual depicts an increase in Bandung as emission from urban/industrial increases episodically, while it depicts a decrease at the three biomass burning sites. As AOD increased, Palangka Raya, Pontianak, and Jambi exhibited wider ranges of observed AE (1.2–1.8) and high FMF (>0.8) in the dry burning period (June to October). On the other hand, Bandung has more aerosol distribution in the range of FMF values 0.6–1 and AE 1–1.6, compared with other sites, suggesting contribution of complex aerosol emission from different sources and likely due to the formation of secondary aerosol production from trace gases. Palangka Raya, Pontianak, and Jambi exhibited non-absorbing characteristics, as indicated by high SSA (>0.95), high FMF, and high EAE values (1.2–1.7) with no discrepancy in seasonal patterns, implying that biomass burning aerosols in Indonesia tend to cool the atmosphere with strong scattering rather than absorbing. At Bandung, aerosols mixed with slightly absorbing and non-absorbing aerosols owing to urban and industrial emissions. This study lays a foundation for further research on the contribution of aerosol radiative forcing to climate within the complex aerosol and cloud environments in Indonesia.

Aerosol optical depth↗

Stratospheric aerosols and climatic change

Stratospht1ic sulfuric acid particles scatter and absorb sunlight and they scatter, absorb and emit terrestrial thermal radiation. These interactions play a role in the earth's radiation balance and therefore affect climate. The stratospheric aerosols are perturbed by volcanic injection of SO2 and ash, by aircraft injection of SO2, by rocket exhaust of Al2O3 and by tropospheric mixing of particles and pollutant SO2 and COS. In order to assess the effects of these perturbations on climate, the effects of the aerosols on the radiation balance must be understood and in order to understand the radiation effects the properties of the aerosols must be known. The discussion covers the aerosols' effect on the radiation balance. It is shown that the aerosol size distribution controls whether the aerosols will tend to warm or cool the earth's surface. Calculations of aerosol properties, including size distribution, for various perturbation sources are carried out on the basis of an aerosol model. Calculations are also presented of the climatic impact of perturbed aerosols due to volcanic eruptions and Space Shuttle flights.

Toon, O. B.↗

Realistic operation of two residential cordwood-fired outdoor hydronic heater appliances—Part 3: Optical properties of black and brown carbon emissions

Residential biomass combustion is a source of carbonaceous aerosol. Inefficient combustion, particularly of solid fuels produces large quantities of black and brown carbon (BC and BrC). These particle types are important as they have noted effects on climate forcing and human health. One method of measuring these quantities is by measurement of aerosol light-absorption and scattering, which can be performed using an aethalometer and nephelometer, respectively. These instruments are widely deployed in the study of ambient air and are frequently used in air quality modeling and source apportionment studies. In this study, we will describe (1) a method for measuring primary BC and BrC emissions from two residential log-fired wood hydronic heaters and (2) the BC and BrC emission from these devices over a wide range of operating conditions, such as cold-starts, warm-starts, four different levels of output ranging from 15% to 100% maximum rated output, and periods of repeated cycling. The range in flue-gas BC concentrations, measured using an aethalometer at the 880 nanometer (nm) wavelength, were between 5.09 × 10 2 and 2.24 × 10 4 micrograms per cubic meter (µg/m 3 ) while the scattering coefficient of the flue-gas, measured by a nephelometer at 880 nm, ranged between 2.20 × 10 3 and 8.56 × 10 5 inverse megameters (Mm –1 ). The BrC concentrations, measured using the 370 nm wavelength of an aethalometer, were between 9.10 × 10 1 and 3.56 × 10 4 µg/m 3 . The calculated Angstrom Absorption Exponent (AAE) of the flue-gas aerosol ranged between 1.54 and 3.63. Performing a comparison between the measured BC concentration and an external particulate matter (PM) concentration showed that overall BC makes up roughly a quarter of the PM emitted by either of the two appliances. Further for both appliances, the cold-start and the test phase immediately following it had the highest BC and BrC concentrations, the highest measured scattering coefficient, as well as a low AAE.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Evaluation and improvement of the parameterization of aerosol hygroscopicity in global climate models using in-situ surface measurements (Final Report)

Aerosols are tiny particles suspended on the atmosphere that can interact with incoming solar radiation and affect the Earth radiative budget. They do so by scattering and absorbing solar radiation, and these properties vary depending on the aerosol size and chemical composition. Moreover, by taking up water from the surrounding air, hygroscopic aerosol particles will grow in size and change their chemical composition, thus modifying their optical properties (scattering and absorption) and their final impact on radiative forcing calculations. An accurate knowledge of aerosol hygroscopicity is crucial for estimating the net radiative impact of aerosols. We took a three-pronged approach to improve our understanding of aerosol hygroscopicity and how it is implemented in Earth system models. In the first part of our project, we developed a benchmark dataset from existing aerosol hygroscopic growth measurements made by tandem nephelometer humidogram systems. We analyzed, using a standardized methodology, observations from 26 in-situ stations around the globe. Measurement data was collected from multiple data providers, reviewed and harmonized to create a consistent dataset of the scattering enhancement factor due to aerosol water uptake. This dataset is archived in several publicly available databases for use by interested researchers. In the second part of the project, we used the benchmark hygroscopicity dataset to perform a global study on aerosol hygroscopicity and aerosol optical properties. Measurements show a global picture of scattering enhancement with larger values for Arctic and marine sites and lower for urban and desert sites. We assessed the RH dependence of aerosol radiative forcing and showed that the overall effect of aerosol hygroscopicity on DARF is an increase in the absolute forcing effect (negative sign) by a factor of up to 4 compared to dry conditions (RH<40%). Finally, we explored using aerosol single scattering albedo (SSA) and scattering Angstrom exponent (SAE) as possible proxies for aerosol hygroscopicity. SSA showed more promise as a surrogate for the scattering enhancement factor than SAE, but neither was ideal. In the third part of the project we evaluated the output of ten Earth system models (ESMs) against the benchmark hygroscopicity dataset. ESMs utilize various schemes for aerosol hygroscopicity which had not been previously tested against observations on a global scale. We found that ESMs currently overestimate scattering enhancement due to hygroscopic growth. Model parameterizations of hygroscopicity and model chemistry are two main factors driving the observed diversity in hygroscopicity simulations among the models. In addition, our study makes several suggestions for modelers, including improving the parameterizations of organic and sea salt aerosol hygroscopicity. Future hygroscopicity model evaluation experiments should include the model data related to particles size which was not available for our study.

54 ENVIRONMENTAL SCIENCES↗

An Exploratory Approach Using Regression and Machine Learning in the Analysis of Mass Absorption Cross Section of Black Carbon Aerosols: Model Development and Evaluation

Mass absorption cross-section of black carbon (MAC BC ) describes the absorptive cross-section per unit mass of black carbon, and is, thus, an essential parameter to estimate the radiative forcing of black carbon. Many studies have sought to estimate MAC BC from a theoretical perspective, but these studies require the knowledge of a set of aerosol properties, which are difficult and/or labor-intensive to measure. We therefore investigate the ability of seven data analytical approaches (including different multivariate regressions, support vector machine, and neural networks) in predicting MAC BC for both ambient and biomass burning measurements. Our model utilizes multi-wavelength light absorption and scattering as well as the aerosol size distributions as input variables to predict MAC BC across different wavelengths. We assessed the applicability of the proposed approaches in estimating MAC BC using different statistical metrics (such as coefficient of determination (R 2 ), mean square error (MSE), fractional error, and fractional bias). Overall, the approaches used in this study can estimate MAC BC appropriately, but the prediction performance varies across approaches and atmospheric environments. Based on an uncertainty evaluation of our models and the empirical and theoretical approaches to predict MAC BC , we preliminarily put forth support vector machine (SVM) as a recommended data analytical technique for use. We provide an operational tool built with the approaches presented in this paper to facilitate this procedure for future users.

54 ENVIRONMENTAL SCIENCES↗