SEARCH · Engineering Papers

Results for “adaptable tools”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

All sources NASA NTRS DOE OSTI

DOE OSTI2016

TH-AB-202-03: A Novel Tool for Computing Deliverable Doses in Dynamic MLC Tracking Treatments

Purpose: In tracked dynamic multi-leaf collimator (MLC) treatments, segments are continuously adapted to the target centroid motion in beams-eye-view. On-the-fly segment adaptation, however, potentially induces dosimetric errors due to the finite MLC leaf width and non-rigid target motion. In this study, we outline a novel tool for computing the 4d dose of lung SBRT plans delivered with MLC tracking. Methods: The following automated workflow was developed: A) centroid tracking, where the initial segments are morphed to each 4dCT phase based on the beams-eye-view GTV shift (followed by a dose calculation on each phase); B) re-optimized tracking, in which all morphed initial plans from (A) are further optimised (“warm-started”) in each 4dCT phase using the initial optimisation parameters but phase-specific volume definitions. Finally, both dose sets are accumulated to the reference phase using deformable image registration. Initial plans were generated according to the RTOG-1021 guideline (54Gy, 3-Fx, equidistant 9-beam IMRT) on the peak-exhale (reference) phase of a phase-binned 4dCT. Treatment planning and delivery simulations were performed in RayStation (research v4.6) using our in-house segment-morphing algorithm, which directly links to RayStation through a native C++ interface. Results: Computing the tracking plans and 4d dose distributions via the in-house interface takes 5 and 8 minutes respectively for centroid and re-optimized tracking. For a sample lung SBRT patient with 14mm peak-to-peak motion in sup-inf direction, mainly perpendicular leaf motion (0-collimator) resulted in small dose changes for PTV-D95 (−13cGy) and GTV-D98 (+18cGy) for the centroid tracking case compared to the initial plan. Modest reductions of OAR doses (e.g. spinal cord D2: −11cGy) were achieved in the idealized tracking case. Conclusion: This study presents an automated “1-click” workflow for computing deliverable MLC tracking doses in RayStation. Adding a non-deliverable re-optimized tracking scenario is expected to help quantify plan robustness for more challenging patients with anatomy deformations. We acknowledge support of the MLC tracking research from Elekta AB. MFF is supported by Cancer Research UK under Programme C33589/A19908. Research at ICR is also supported by Cancer Research UK under Programme C33589/A19727 and NHS funding to the NIHR Biomedical Research Centre at RMH and ICR.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2025

Recent Progress in Solid‐State Lithium Batteries through Cathode Microstructure Engineering

A high‐performance cathode is necessary to realize the great potentials of solid‐state batteries such as high energy density and long cycle life. It is also needed to validate electrolyte performance, which is lacking. Currently, cathodes for solid‐state batteries are thinner and have lower cathode active material content than their lithium‐ion battery counterpart, resulting from insufficient conductivity and limiting the battery energy density. This review article provides an overview of recent development in cathode microstructures and their impact on battery properties, including compatibility between cathode and electrolyte, cathode architecture design, interface engineering, correlation between material properties, cathode processing approaches, and performance, as well as the advanced characterization methods used to understand the above correlations . Some perspectives on future development are shared including utilizing in situ and operando characterization tools to better understand dynamic evolution of the cathode/electrolyte interface, adapting artificial intelligence and machine learning to design and optimize cathode structures. The article is aimed to promote research interest on cathode development and advance solid‐state battery technologies.

cathode engineering↗

DOE OSTI2021

EPIsembleVis: A geo-visual analysis and comparison of the prediction ensembles of multiple COVID-19 models

In this work, we present EPIsembleVis, a web-based comparative visual analysis tool for evaluating the consistency of multiple COVID-19 prediction models. Our approach analyzes a collection of COVID-19 predictions from different epidemiological models as an ensemble and utilizes two metrics to quantify model performance. These metrics include (a) prediction uncertainty (represented as the dispersion of predictions in each ensemble) and (b) prediction error (calculated by comparing individual model predictions with the recorded data). Through an interactive visual interface, our approach provides a data-driven workflow for (a) selecting and constructing the COVID-19 model prediction ensemble based on the spatiotemporal overlap of available predictions of multiple epidemiological models, (b) quantifying the model performance using both the uncertainty of each model prediction ensemble, and the error of each ensemble member that represents individual model predictions, and (c) visualizing the spatiotemporal variability in the projection performance of individual models using a suite of novel ensemble visualization techniques, such as the data availability map, a spatiotemporal textured-tile calendar, multivariate rose chart, and time-series leaflet glyph. We demonstrate the capability of our ensemble visual interface through a case study that investigates the performance of weekly COVID-19 predictions, which are provided through the COVID-19 Forecast Hub UMass-Amherst Influenza Forecasting Center of Excellence [47] for the United States and United States Territories. The EPIsembleVis tool is implemented using open-source web technologies and adaptive system design, rendering it interoperable with Elasticsearch and Kibana for automatically ingesting COVID-19 predictions from online repositories, and it is generalizable for analyzing worldwide projections from more epidemiological models.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2026

Predicting Adaptively Chosen Observables in Quantum Systems

Recent advances have demonstrated that 𝒪⁡(log 𝑀) measurements suffice to predict 𝑀 properties of arbitrarily large quantum many-body systems. However, these remarkable findings assume that the properties to be predicted are chosen independently of the data. This assumption can be violated in practice, where scientists adaptively select properties after looking at previous predictions. This work investigates the adaptive setting for three classes of observables: local, Pauli, and bounded-Frobenius-norm observables. We prove that Ω⁡(√𝑀) samples of an arbitrarily large unknown quantum state are necessary to predict expectation values of 𝑀 adaptively chosen local and Pauli observables, where the system size scales exponentially and polynomially in 𝑀, respectively. We also present computationally efficient algorithms that achieve this information-theoretic lower bound. In contrast, for bounded-Frobenius-norm observables, we devise an algorithm requiring only 𝒪⁡(log 𝑀) samples, independent of system size. These results highlight the potential pitfalls of adaptivity in analyzing data from quantum experiments and provide algorithmic tools to safeguard against erroneous predictions in quantum experiments.

Machine learning↗

DOE OSTI2022

Generating Ectropis obliqua axenic larvae in support of functional microbiome studies

Abstract Ectropis obliqua Prout (Lepidoptera: Geometridae) is a serious leaf‐eating pest in tea gardens throughout China, with rich bacterial communities in the larval gut. Few studies have investigated whether these bacteria play an important role in growth, development, and adaptability of E. obliqua . Axenic larval models are a useful tool for the study of interactions between gut bacteria and host insects. At present, artificial diet and antibiotics are typically used to remove larval gut bacteria for study; however, this method may change the natural food of insects and the habitat provided by their host plants, and cannot completely eliminate insect gut bacteria. Therefore, in order to establish an axenic insect feeding model, we first investigated the effects of egg age, different disinfectant concentration, and treatment time on the eggs of E. obliqua through orthogonal experiments. Next, we fed E. obliqua larvae tissue‐cultured tea seedlings under aseptic conditions. Thus, we successfully generated a feeding model of gut axenic larvae in the laboratory. Based on it, we then compared the mortality of axenic and non‐axenic E. obliqua larvae infected with the entomopathogenic fungus Beauveria bassiana (Balsamo) Vuill. These results demonstrated the feasibility of this axenic larval model and that B. bassiana is a broad‐spectrum entomogenous fungus with a toxic effect on E. obliqua .

Su, Qingqing↗

DOE OSTI2021

Label-free DNA biosensing by topological light confinement

Large-area and transparent all-dielectric metasurfaces sustaining photonic bound states in the continuum (BICs) provide a set of fundamental advantages for ultrasensitive biosensing. BICs bridge the gap of large effective mode volume with large experimental quality factor. Relying on the transduction mechanism of reactive sensing principle, herein, we first numerically study the potential of subwavelength confinement driven by topological decoupling from free space radiation for BIC-based biosensing. Then, we experimentally combine this capability with minimal and low-cost optical setup, applying the devised quasi-BIC resonator for PNA/DNA selective biosensing with real-time monitoring of the binding event. A sensitivity of 20 molecules per micron squared is achieved, i.e. ≃0.01 pg. Further enhancement can easily be envisaged, pointing out the possibility of single-molecule regime. This work aims at a precise and ultrasensitive approach for developing low-cost point-of-care tools suitable for routine disease prescreening analyses in laboratory, also adaptable to industrial production control.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2013

Marine Corps Base Camp Lejeune New River estuary wave height

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2013

Marine Corps Base Camp Lejeune New River Estuary - Acoustic Doppler Current Profiler (ADCP) Results

Critical military training and testing on lands along the nation’s coastal and estuarine shorelines are increasingly placed at risk because of development pressures in surrounding areas, impairments due to other anthropogenic disturbances, and increasing requirements for compliance with environmental regulations. The U.S. Department of Defense (DoD) intends to enhance and sustain its training and testing assets and to optimize its stewardship of natural resources through the development and application of an ecosystem-based management approach on DoD installations. To accomplish this goal, particularly for installations in estuarine/coastal environments, the Strategic Environmental Research and Development Program (SERDP) launched the Defense Coastal/Estuarine Research Program (DCERP) as a minimum 10-year effort at Marine Corps Base Camp Lejeune (MCBCL) in North Carolina. The results of the first six years of the program (DCERP1) are presented here.The overarching objectives of DCERP are to: (1) understand the effects of military training activities, infrastructure development, and other coastal military installations; (2) develop models, tools, and indicators to evaluate ecosystem health; and (3) recommend adaptive management strategies to sustain ecosystem natural resources within the context of an active military installation.This data package contains a zipfile of results from Acoustic Doppler Current Profilers (ADCPs) used to collect current profiles throughout the New River Estuary in 2009: Teledyne RD Instrument’s acoustic Doppler current profilers (ADCPs) were deployed throughout the NRE to understand current flows and tidal extent. (Current velocity and water level data collected by the ADCPs were also used to validate a hydrodynamic model of the NRE.) Two ADCPS were deployed by Marker 12 and the Highway 172 bridge from late-February to early-July 2009. These ADCPs were attached to steel frames that rested on the sediment surface with the ADCP looking upward to make full water column profiles of water velocity minus a 1-m blanking between the instrument and sediment surface. Also attached to the steel frames were conductivity-temperature-depth (CTD) sensors, which provided concomitant salinity, temperature, and water depth data with the ADCP current measurements. Two ADCPS were also deployed in close proximity to the AVPs in Stones and Morgan Bays from mid-July to mid-December 2009. These ADCPs were deployed flush to the estuary floor to maximize the full vertical sampling capability at these shallow stations and the AVPs collected coincidental temperature, salinity, and depth measurements. For all deployments, the ADCPs were programmed in fast ping-rate mode 12 using 20 pings per ensemble and collected profiles in 10-cm bins every 6 minutes yielding a standard deviation in velocity measurements of 1.27 cm s-1. Current velocity and water level data were analyzed to understand the tidal influence on circulation within the NRE. Harmonic analyses were performed to extract the dominant tidal constituents from the velocity and depth records using T-tide run in MATLAB (Pawlowicz et al., 2002). These measurements of tidal amplitude and phase were then used to validate the high-resolution Advanced Circulation (ADCIRC) Model of the NRE region.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Optimized Test Section for Helium Flow Loop Experiment

Phase 3 of this project uses the knowledge and techniques gained from Phase 1 and Phase 2. The first outcome of Phase 3 is a new test section which can be manufactured and tested in the Helium Flow Loop Experiment to verify the results of the optimization study. The second outcome of Phase 3 is analyzing the features of this design and determining its performance under simulated TBM conditions: heat flux, pressure, mass flow rate, one-sided and volumetric heating. This will be accomplished by first using the results from the Phase 1 analyses and then applying the optimization strategy from Phase This phase uses the STAR-CCM+ Design Manager tool to apply the optimization strategy to the Helium Flow Loop Experiment (HFLE). The optimization algorithm used by the Design Manager tool is Simultaneous Hybrid Exploration that is Robust, Progressive, and Adaptive (SHERPA search algorithm). In addition to demonstrating the optimization features, a simple parameter sweep is also included in this phase. This report details the applied single objective optimization.

42 ENGINEERING↗

DOE OSTI2024

Comparison of Full-Field and Integrated CFD Convergence Based on Richardson Extrapolation

This work investigated the usefulness of Richardson extrapolation--based discretization error estimates across all points in a solution field to produce a spatial convergence field for a computational fluid dynamics (CFD) simulation. The presented work used previously developed methods for Richardson extrapolation to compute the convergence orders of a CFD simulation at all points of the base (coarsest) mesh solution. Three test cases of increasing complexity were considered: Poiseuille flow, incompressible flow around a sharp corner, and transonic flow over an RAE 2822 airfoil. These test cases highlighted the potential of the proposed method to identify error sources and their relation to the model system-response-quantity convergence orders. However, these test cases also revealed the immaturity of the proposed method stemming from the unreliability of computing observed convergence orders at single points. Nonetheless, the test cases highlighted that the observed convergence orders allow for a more accurate diagnosis of constructive and destructive error transport than mesh pair error estimates. In the long run, the proposed method can be a tool for developing efficient and advanced error management strategies like adaptive mesh refinement.

Weinmeister, Justin↗

DOE OSTI2018

CNC Module for Turning: A New CAM Application

The integrated CAM application for the KOMPAS-3D environment known as CNC Module for Turning is considered. This application permits automated development of control programs for numerically controlled lathes. The user may readily adapt the CAM application for specific production conditions and machine tools, thanks to features such as the following: representation of the cutting tools by means of parametric 3D models, the possibility of including fixed CNC cycles in the control programs, and the use of the Python language for programming of the postprocessors.

42 ENGINEERING↗

DOE OSTI2015

Application of genomics-assisted breeding for generation of climate resilient crops: Progress and prospects

Climate change affects agricultural productivity worldwide. Increased prices of food commodities are the initial indication of drastic edible yield loss, which is expected to increase further due to global warming. This situation has compelled plant scientists to develop climate change-resilient crops, which can withstand broad-spectrum stresses such as drought, heat, cold, salinity, flood, submergence and pests, thus helping to deliver increased productivity. Genomics appears to be a promising tool for deciphering the stress responsiveness of crop species with adaptation traits or in wild relatives toward identifying underlying genes, alleles or quantitative trait loci. Molecular breeding approaches have proven helpful in enhancing the stress adaptation of crop plants, and recent advances in high-throughput sequencing and phenotyping platforms have transformed molecular breeding to genomics-assisted breeding (GAB). In view of this, the present review elaborates the progress and prospects of GAB for improving climate change resilience in crops, which is likely to play an ever increasing role in the effort to ensure global food security.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2025

Comparative Analysis via CFD Simulation on the Impact of Graphite Anode Morphologies on the Discharge of a Lithium-Ion Battery

The morphology of electrode materials plays a crucial role in determining the performance of lithium-ion batteries. Traditional computational models often simplify graphite flakes as uniformly sized spheres, which limits their predictive accuracy. In this study, we present a computational workflow that overcomes these limitations by incorporating a more realistic representation of graphite morphologies. This workflow is designed to be flexible and reproducible, enabling efficient evaluation of electrochemical performance across diverse material structures. By exploring different graphite morphologies, our approach accelerates the optimization of material preparation techniques and processing conditions. Our findings reveal that incorporating greater morphological complexity leads to significant deviations from classical model predictions. Instead, our refined model offers a more accurate representation of battery discharge behavior, closely aligning with experimental data. This improvement underscores the importance of detailed morphological descriptions in advancing battery design and performance assessments. To promote accessibility and reproducibility, we provide the developed code for seamless integration with the COMSOL API, allowing researchers to implement and adapt it easily. This computational framework serves as a valuable tool for investigating the impact of graphite morphology on battery performance, bridging the gap between theoretical modeling and experimental validation to enhance lithium-ion battery technology.

25 ENERGY STORAGE↗

NASA NTRS1990

Time scale algorithm: Definition of ensemble time and possible uses of the Kalman filter

The comparative study of two time scale algorithms, devised to satisfy different but related requirements, is presented. They are ALGOS(BIPM), producing the international reference TAI at the Bureau International des Poids et Mesures, and AT1(NIST), generating the real-time time scale AT1 at the National Institute of Standards and Technology. In each case, the time scale is a weighted average of clock readings, but the weight determination and the frequency prediction are different because they are adapted to different purposes. The possibility of using a mathematical tool, such as the Kalman filter, together with the definition of the time scale as a weighted average, is also analyzed. Results obtained by simulation are presented.

Tavella, Patrizia↗

NASA NTRS1991

Lessons learned in the development of the Hubble Space Telescope software

An effort is made to document what was successful in the HST software development, and to present a retrospective analysis indicating what could have been done more efficiently. Consideration is given to systems engineering and design definition, standards and tools, system architecture and design, operational considerations, and reuse and adaptation of existing resources.

Harrington, Michael↗

NASA NTRS1992

Bearing servicing tool

A tool for removing and/or replacing bearings in situ is presented. The tool is comprised of a brace having a first end adapted to engage a first end of the bearing housing, and a second end adapted to engage a second end of the bearing housing. If the two ends of the bearing housing are different in configuration, then the respective ends of the brace are configured accordingly. An elongate guide member integral with the brace has two parts, each projecting endwise from a respective end of the brace. A removable pressure plate can be mounted on either part of the guide member for longitudinal movement therealong and has first and second ends of different configurations adapted to engage the first and second ends of the bearing. A threaded-type drive is cooperative between the guide and the pressure plate to move the pressure plate longitudinally along the guide and apply a force to the bearing, either to remove the bearing from its housing, or to emplace a new bearing in the housing.

Boyce, Rex A.↗

NASA NTRS1993

NASA access mechanism: Graphical user interface information retrieval system

Access to online information sources of aerospace, scientific, and engineering data, a mission focus for NASA's Scientific and Technical Information Program, has always been limited to factors such as telecommunications, query language syntax, lack of standardization in the information, and the lack of adequate tools to assist in searching. Today, the NASA STI Program's NASA Access Mechanism (NAM) prototype offers a solution to these problems by providing the user with a set of tools that provide a graphical interface to remote, heterogeneous, and distributed information in a manner adaptable to both casual and expert users. Additionally, the NAM provides access to many Internet-based services such as Electronic Mail, the Wide Area Information Servers system, Peer Locating tools, and electronic bulletin boards.

Hunter, Judy↗

NASA NTRS1993

NASA Access Mechanism - Graphical user interface information retrieval system

Access to online information sources of aerospace, scientific, and engineering data, a mission focus for NASA's Scientific and Technical Information Program, has always been limited by factors such as telecommunications, query language syntax, lack of standardization in the information, and the lack of adequate tools to assist in searching. Today, the NASA STI Program's NASA Access Mechanism (NAM) prototype offers a solution to these problems by providing the user with a set of tools that provide a graphical interface to remote, heterogeneous, and distributed information in a manner adaptable to both casual and expert users. Additionally, the NAM provides access to many Internet-based services such as Electronic Mail, the Wide Area Information Servers system, Peer Locating tools, and electronic bulletin boards.

Hunter, Judy F.↗