Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Warp”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Detecting a boosted diboson resonance

New light scalar particles in the mass range of hundreds of GeV, decaying into a pair of W/Z bosons can appear in several extensions of the SM. The focus of collider studies for such a scalar is often on its direct production, where the scalar is typically only mildly boosted. The observed W/Z are therefore well-separated, allowing analyses for the scalar resonance in a standard fashion as a low-mass diboson resonance. In this work we instead focus on the scenario where the direct production of the scalar is suppressed, and it is rather produced via the decay of a significantly heavier (a few TeV mass) new particle, in conjunction with SM particles. Such a process results in the scalar being highly boosted, rendering the W/Z’s from its decay merged. The final state in such a decay is a “fat” jet, which can be either four pronged (for fully hadronic W/Z decays), or may be like a W/Z jet, but with leptons buried inside (if one of the W/Z decays leptonically). In addition, this fat jet has a jet mass that can be quite different from that of the W/Z/Higgs/top quark-induced jet, and may be missed by existing searches. In this work, we develop dedicated algorithms for tagging such multi-layered “boosted dibosons” at the LHC. As a concrete application, we discuss an extension of the standard warped extra dimensional framework where such a light scalar can arise. We demonstrate that the use of these algorithms gives sensitivity in mass ranges that are otherwise poorly constrained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Preparation of Bimetal Objects by Lost Foam Casting

The possibility of obtaining bimetallic steel castings by the lost foam casting method is demonstrated, in which an insert of special steel is placed in an expanded polystyrene mold. Bottom casting is used. With the optimum choice of the casting temperature, fusion of the steels is guaranteed and there is no warping of flat inserts. Stages of bimetallic casting formation are considered and the parameters affecting filling of the mold and ensuring the production of a finished casting are determined. It is shown that the heat treatment of objects with air cooling provides hardness of 20–46 HRC for steel of 20X13 with different tempering conditions. The technology is recommended for parts of the locking assembly of pipeline fittings and other products where a combination of local special properties and workability is required.

36 MATERIALS SCIENCE↗

Investigation of Mechanical and Electromagnetic Interference Shielding Properties of Nickel–CFRP Textile Composites

The most common materials used for electromagnetic interference shielding are metals and their alloys. However, those materials are heavy and highly reflective. In order to eliminate or reduce the intensity of wave radiation in their working environment, lightweight materials that have interference shielding properties are needed. In this paper, nickel wire mesh yarns (warps) were woven into carbon fibers-reinforced plastic yarns (wefts) to produce metal–carbon textile composite materials. The plain weave and 2/2 twill weave techniques were used, and the woven fabrics were laminated to manufacture experimental test samples. The nickel, which has high magnetic permeability and good electric conductivity, and carbon fibers, which have good electrical, thermal and mechanical properties, were used together to achieve the desired properties. The shielding effectiveness of each sample was investigated using a network analyzer connected with coaxial transmission line test in accordance with ASTM 4935-99 standard, with the frequencies ranging from 500 MHz to 1.5 GHz. Here, the plain weave structure showed higher shielding effectiveness than twill weave. The absorption losses for both materials were relatively greater than reflection losses. In reference to the orientation of wire mesh yarns about the loading axis, the tensile strengths in the transversal direction were 19.04 and 16.34% higher than the tensile strengths in longitudinal direction for plain weave and twill weave, respectively. The fractography analysis with SEM showed a ductile fracture of wire mesh and brittle fracture of epoxy matrix and carbon fibers.

36 MATERIALS SCIENCE↗

Mesoscale Numerical Characterization of Kevlar and Carbon–Kevlar Hybrid Plain-Woven Fabric Compression Behavior

A mesoscale finite element model (FEM) of the plain-woven fabric representative elementary volume (REV/unit cell) is developed. The developed FEM is used to predict the nonlinear compaction behavior of monolithic and intraply hybrid fabric made of high-strength carbon and Kevlar fibers. For geometrical modeling of the fabric REV, TexGen, an open-source geometrical modeling software (developed at Nottingham University), is utilized, and for mechanical characterization, FE simulation tool Abaqus{sup ®} is used. Geometrical nonlinearity of the fabric, including periodic boundary conditions and yarn interactions, is incorporated in the REV FE model. Material nonlinearity caused by transversely isotropic behavior of fibrous yarns is implemented through the user material subroutine form in FE simulation along with local orientation assigned to each yarn in the REV. Material properties of fibers are extracted from the literature and supplier data. The compression behavior of monolithic Kevlar and hybrid carbon–Kevlar (carbon warp and Kevlar weft yarns, C–K) fabric is predicted using the proposed FE model. FEM-predicted results were found to have good agreement with the experimentally obtained ones. Results depict that C–K hybrid fabrics have improved compression strength. Hybridization effect is governed by yarns mutual interaction, yarn area at crossovers, and transverse in-plane properties of the interyarn hybridized fabric. The proposed FE model can be used to predict the mechanical behavior of woven fabrics with different weaving patterns, unit cell geometry, material properties, and loading conditions.

36 MATERIALS SCIENCE↗

Mechanics and energetics modeling of ball-milled metal foil and particle structures

The reported research establishes a semi-analytical computational predictive model of fractal microstructure in ball-milled metal foils and powder particulates, with emphasis on its transformation mechanics via an energy-based approach. The evolving structure is composed of reconfigurable warped ellipsoid material domains, subjected to collisions with the ball milling impactors following Brownian motion energetics. In the first step of the model, impacts are assumed to generate ideal Hertzian elastic stress fields, with associated bulk deformations quantified as per Castigliano's strain energy methods. In the second stage of the model, elastic energies are recast to produce frictional slip and plastic yield, thus resulting in surface micro-joints. Only two parameters of the model necessitate experimental calibration, performed by comparison of joint energy with laboratory tensile measurements on ball-milled multilayer Al-Ni foils. Model predictions of evolving internal microstructure are validated against SEM micrographs of Al-Ni powder particulate samples for different ball milling durations. Results demonstrate the capability of the model to accurately capture relevant fractal measures of the microstructure of ball-milled powders.

36 MATERIALS SCIENCE↗

Localized material compression to correct distortion in wire arc additive manufacturing

Wire Arc Additive Manufacturing (WAAM) is an advanced manufacturing technology which utilizes welding systems to generate three dimensional geometries in a layer-by-layer fashion. Distortion or warping of a print substrate and WAAM components due to thermally induced residual stresses is an ongoing challenge limiting the widespread adoption of WAAM technologies for producing components. In this manuscript, a novel approach is described to address thermal distortion in deposited components by applying lateral compressions along the length of the deposited material. To demonstrate this method, a series of single-track walls were printed and compressed at evenly spaced intervals using a modified hydraulic cutter tool. The jaws of the tool were modified to compress material rather than to shear it. A mathematical model was developed to relate the curvature of the deposited material to the volume of compression required to eliminate this distortion. Validation of this model was performed using 3D scan data to compare the change in wall curvature induced by compression to the volume of the applied compressions. Substrate deflection was also compared against a control wall, and implementation of wall compression reduced maximum deflections by 93% across a series of four depositions and subsequent compressions. Wall cross sections were also analyzed to determine the impact of compression on material hardness and grain structure. The results demonstrate that successively placed lateral compressions can effectively control and potentially eliminate bending distortion in printed parts. This methodology can be further developed to form a robust model for correction of thermally-induced distortion in WAAM components.

Additive manufacturing↗

Additively manufactured carbon fiber-reinforced composites: State of the art and perspective

While polymer additive manufacturing (AM) has advanced significantly over the past few decades, the limitations in material properties, speed of manufacture, and part size have relegated this technology to the space of rapid prototyping rather than the legitimate manufacture of end-use parts. Carbon fiber offers a low density, a low coefficient of thermal expansion, and high thermal conductivity and is an ideal material for bringing polymer-based AM from the realm of form and fit to that of form, fit, and function. The use of carbon fiber in AM can improve material properties, reduce the time required to manufacture functional parts compared with traditional subtractive technologies, and reduce warping, thereby enabling a larger possible build envelope. Therefore, the addition of carbon fiber to various AM technologies is of increasing interest in academic and industrial communities. This paper examines the work performed in this fast-growing area to date. Specifically, the effects of fiber reinforcement on the structure and mechanical properties of 3D printed parts are investigated within the body of literature. Upper bounds for tensile properties of carbon fiber composites are theoretically evaluated and compared with experimentally measured values. Moreover, current and potential applications of additively manufactured carbon fiber composites in the context of desktop 3D printing and big area AM are discussed. Recent innovations and industry breakthroughs in this field are also examined. This review is intended to organize and synthesize the present body of work surrounding AM of carbon fiber reinforced plastics, identify the most promising technologies, and prescribe viable research and development paths forward to advance AM from the application space of rapid prototyping to that of functional, load-bearing, end-use parts.

36 MATERIALS SCIENCE↗

New models for asymmetric kinks and branes

We investigate new models for scalar fields in flat and curved spacetime. We note that the global reflection symmetry of the potential that identify the scalar field model does not exclude the presence of internal asymmetries that give rise to asymmetric structures. Despite the asymmetry, the new structures are linearly stable and in the braneworld scenario with an extra dimension of infinite extend, they may generate new families of asymmetric thick branes that are robust against small fluctuations in the warped geometry. - Highlights: • Deformation method in defects models. • New Models for asymmetric kinks and branes are proposed. • Study of scalar fields in thick brane scenarios.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spacetime manipulation of quantum information around rotating black holes

The X-ray photons emitted by the accretion disks around rotating black holes are polarized and acquire orbital angular momentum, two degrees of freedom that can encode quantum information. Nevertheless, escaping the accretion disk, photons are passing throughout the extreme warped and twisted spacetime near spinning black holes suffering rotations of polarization angle and changes in the orbital angular moment. We conjecture that these changes in the angle of polarization and orbital angular momentum can implement elementary quantum gates and simple quantum circuits. Consequently, when detected by an asymptotic observer, the photons emitted near rotating black holes encode quantum information that can be measured by actual quantum information technology.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

New results on asymmetric thick branes

This work deals with the presence and stability of thick brane solutions in the warped five dimensional braneworld scenario with a single extra spatial dimension of infinite extent. We combine two distinct procedures that give rise to new possibilities, allowing that we describe models of asymmetric thick branes, with the asymmetry being controlled by a single real parameter. We illustrate the main results with some distinct models, which show that the method works for both standard and generalized models, and the solutions are gravitationally stable against small perturbations of the metric.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Planar, curved and twisted molecular nanographenes: Reduction-induced alkali metal coordination

Planar and curved polycyclic aromatic hydrocarbons (PAHs) attract significant attention as molecular models of fullerenes, carbon nanotubes, and graphene, thus stimulating broad investigation of chemical reactivity and materials applications of designed nanocarbon π-systems. Non-planar molecular nanographenes (NGs) recently emerge as advanced anode materials in energy storage, showing high reduction limits and enhanced alkali metal intercalation levels. However, the lack of direct structure–property correlations in such complex hybrid systems impedes their further development and utilization. With a focus on alkali-metal-induced reduction of selected PAHs, we herein review original metal binding and intercalation trends, site specific coordination, and distinct carbon framework responses to stepwise electron uptake. Small planar graphene fragments, like triphenylene and coronene, are compared to π-expanded hexabenzocoronenes, followed by the discussion of bowl-shaped corannulene, sumanene and other carbon bowls, as well as bent, warped, and twisted molecular nanographenes. The effect of size, symmetry, and framework topology along with the structural deformation of carbon backbones upon reduction are analyzed, using recent crystallographic examples of alkali-metal intercalated products. In conclusion, the revealed insights into the structures, binding, and metal intercalation in molecular nanographenes should stimulate their future applications as new functional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fundamental chromatographic equations designed for columns packed with very fine particles and operated at very high pressures applications to the prediction of elution times and the column efficiencies

The wall temperatures of three Acquity-BEH-C{sub 18}columns (2.1 mm x 50, 100, and 150 mm) and the temperature of the incoming eluent were maintained constant at 289 K, using a circulating water heat exchanger. The retention times and the band broadening of naphtho[2,3-a]pyrene were measured for each column as a function of the flow rate applied. Pure acetonitrile was used as the eluent. The flow rate dependence of neither elution volumes nor bandwidths can be accounted for by classical models of retention and HETP, respectively, since these models assume columns to be isothermal. Because the heat generated by friction of the eluent against the column bed increases with increasing flow rate, the column bed cannot remain isothermal at high flow rates. This heat is evacuated radially and/or longitudinally by convection, conduction, and radiation. Radial and axial temperature gradients are formed, which are maximum and minimum, respectively, when the temperature of the column wall is kept uniform and constant. The retention times that we measured match well with the values predicted based on the temperature distribution along and across the column, which we calculated and on the temperature dependence of the retention for the same column operated isothermally (i.e., at very low flow rate). The rate of band spreading varies along non-isothermal columns, so the HETP can only be defined locally. It is a function of the axial coordinate. A new contribution is needed to account for the radial thermal heterogeneity of the column, hence the radial distribution of the flow velocities, which warps the elution band. A new model, based on the general dispersion theory of Aris, allows a successful prediction of the unusually large bandwidths observed with columns packed with fine particles, operated at high flow rates, hence high inlet pressures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Regression models using shapes of functions as predictors

Functional variables are often used as predictors in regression problems. A commonly used parametric approach, called scalar-on-function regression, uses the $\mathbb L^2$ inner product to map functional predictors into scalar responses. This method can perform poorly when predictor functions contain undesired phase variability, causing phases to have disproportionately large influence on the response variable. One past solution has been to perform phase–amplitude separation (as a pre-processing step) and then use only the amplitudes in the regression model. In this paper, we propose a more integrated approach, termed elastic functional regression model (EFRM), where phase-separation is performed inside the regression model, rather than as a pre-processing step. This approach generalizes the notion of phase in functional data, and is based on the norm-preserving time warping of predictors. Due to its invariance properties, this representation provides robustness to predictor phase variability and results in improved predictions of the response variable over traditional models. We demonstrate this framework using a number of datasets involving gait signals, NMR data, and stock market prices.

97 MATHEMATICS AND COMPUTING↗

Sintering and collapse of synthetic coal ash and slag cones as observed through constant heating rate optical dilatometry

Ash agglomeration and slagging are responsible for costly maintenance problems in coal-fired boilers. Boiler design and operation rely on critical ash fusion temperatures defined by geometric criteria that explicitly ignore shrinkage or warping. Reproducibility of ash fusion test (AFT) results is known to be a major problem, given the subjective nature of some criteria used in critical temperature reporting. Decades of faulty predictions based on AFT data underscore the need for an objective measure of the likelihood for agglomeration and slagging as a function of coal ash composition and temperature. Heating microscopes and ash fusibility determinators are AFT instruments that are widely available and readily adapted for optical dilatometry of ash cones through digital image analysis. Optical dilatometry enables the continuous measurement of cone height and face area, and the calculation of changes in cone volume and density as a function of temperature during constant heating. A strong correlation was found between the sintering onset temperatures of two synthetic ash compositions measured through optical dilatometry and their corresponding solidus temperatures predicted through thermophysical modeling. The sintering onset temperatures of synthetic slag cones appears consistent with glass transition temperatures estimated using the Kauzmann-Beaman rule. Cone collapse is highly correlated with softening, hemispherical, and fluid temperatures for ash cones. Rapid changes in solid, liquid, and gas volume fractions near the collapse temperature suggest that a transition from capillary to slurry state may play an important role in triggering collapse. Slag cone collapse is better explained by a decrease in viscosity as a function of temperature in the glass working range. Furthermore, the sintering onset temperature and cone collapse temperature are readily understood through thermophysical modeling based on ash composition and provide two additional critical temperatures in the modeling of coal ash agglomeration and slagging.

01 COAL, LIGNITE, AND PEAT↗

Simulating water dynamics related to pedogenesis across space and time: Implications for four-dimensional digital soil mapping

Digital soil mapping (DSM) relies on machine-learning and geostatistics to represent soil property observations across space. DSM techniques are powerful but often empirical, being limited to the quality and density of point samples. Water dynamics are closely related to soil variability, and the physics that govern water movement are well known. Hydrological properties can hence be simulated by physical models through space and time, unveiling key characteristics about soils. We propose the use of hydrologic models to map soils across the surface (2D), depth (1D), and time (1D)–which provides a 4D approach to digital soil mapping (4DSM). The Distributed Hydrology Soil Vegetation Model (DHSVM) was applied to a watershed currently under pasture. Moisture sensors and wells were installed at different depths in the watershed on summit, sideslope and toeslope positions to validate the model. DHSVM simulations of soil moisture distribution and depth to saturation were performed during the hydrological year (October 2008-September 2009). Clusters of similar pixels based on soil moisture values were determined using Dynamic Time Warping (DTW) to align temporal data and K-means. Clustering was performed both seasonally and for the entire year. Temporal patterns simulated by DHSVM matched measurements given by moisture sensors and wells. Seasonal clusters differed from the annual cluster. Distinct clusters were observed for each season and with depth, showing that spatiotemporal soil variability is lost when statically assessing soils. Spatiotemporal clusters corroborated field observations of fragipan occurrence not explicitly spatially mapped by Soil Survey Geographic Database (SSURGO). If a connection can be made between water and soils, static and dynamic soil variability can be predicted using physically based hydrologic models. Hydrologic models can benefit soil mapping by enabling reliable 4D simulation of water dynamics, which are fundamental to soil variability and soil classification and directly relate to biological, physical and chemical soil processes not captured by typical soil sampling protocols.

54 ENVIRONMENTAL SCIENCES↗

Interpreting the spatial distribution of soil properties with a physically-based distributed hydrological model

Digital soil maps are commonly data-driven as the development of physically-based models for soil mapping is difficult due to the complexity of soils. However, physically-based hydrologic models have been successful in simulating water dynamics. Since water movement is a major driver of pedogenesis, the physical rules that govern water movement might help explain and predict the spatial variation of soil properties. Here, we demonstrate the novel use of a physically-based, distributed hydrologic model to inform the spatial distribution of soil properties. The Distributed Hydrology Soil Vegetation Model (DHSVM) was utilized to simulate soil moisture content (SM) and water table depth (WTD) in two hillslope catchments under pasture and forest management wherein hydrologic model outputs were then compared with soil properties measured in situ. SM sensors and wells were installed in both catchments to validate simulations of soil water movement via Nash-Sutcliffe Efficiency (E). In-situ observations were made at 87 sites within both catchments to study the connection between simulated water movement (SM and WTD) and observed soil properties, namely the depth and thickness of the argillic (Bt), fragic (Btx), and C horizons, and the depth of redoximorphic features. The simulated time series of SM and WTD were also clustered per season using Dynamic Time Warping (DTW), which identified similarity among time series at varying timescales. Model validation suggested that simulations of surficial SM (0–20 cm) were reasonable (E = 0.45), however, simulated subsurface SM (45–60 cm) and WTD were not sufficiently accurate. The thickness of Btx horizons were spatially grouped into different populations by SM clusters from every season except spring. For the other properties, only SM dynamics of specific seasons grouped into significantly different populations, suggesting that the explanatory power of simulated water movement varies seasonally and was greater during winter. Here, we show clusters of simulated SM separated soil properties into statistically different populations, showing that hydrologic models could inform areas that followed different water dynamics related to pedogenic trajectories and related biogeochemical processes not necessarily simulated by the model. As such, physically-based modeling of water dynamics can, therefore, inform and advance digital soil mapping by linking water movement patterns stemming from hydrologic model outputs to spatial patterns of soil properties and pedogenesis.

54 ENVIRONMENTAL SCIENCES↗

Quality Assurance of Radiation Therapy Planning Systems: Current Status and Remaining Challenges

Computerized radiation therapy planning systems (RTPSs) are pivotal for treatment planning. The acceptance, commissioning, and quality control of RTPSs are uniquely complex and are described in the American Association of Physicists in Medicine Task Group Report 53 (1998) and International Atomic Energy Agency Technical Report Series No. 430 (2004). The International Atomic Energy Agency also developed a document and data package for use by vendors and purchasers to aid with acceptance testing of RTPSs. This document is based on International Electrotechnical Commission standard 62083 (2000) and describes both 'type' tests to be performed in the factory and 'site' tests to be performed in the clinic. The American Association of Physicists Task Group Report 67 described benchmark tests for the validation of dose calculation algorithms. Test data are being produced with the backing of the U.S. National Cancer Institute. However, significant challenges remain. Technology keeps evolving rapidly, thus requiring new quality assurance (QA) procedures. Intensity-modulated radiation therapy with its use of inverse optimization has added a new dimension to QA, because the results are not intuitively obvious. New technologies such as real-time ultrasound guidance for brachytherapy, TomoTherapy, and Cyberknife, require their own specialized RTPSs with unique QA requirements. On-line imaging allows for the generation of dose reconstructions using image warping techniques to determine the daily dose delivered to the patient. With increasing computer speeds, real-time reoptimization of treatment plans will become a reality. Gating technologies will require four-dimensional dose calculations to determine the actual dose delivered to tissue voxels. With these rapidly changing technologies, it is essential that a strong QA culture is invoked in every institution implementing these procedures and that new protocols are developed as a part of the clinical implementation process.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

What CTV-to-PTV Margins Should Be Applied for Prostate Irradiation? Four-Dimensional Quantitative Assessment Using Model-Based Deformable Image Registration Techniques

Purpose: To quantify adequate anisotropic clinical target volume (CTV)-to-planning target volume (PTV) margins for three different setup strategies used during prostate irradiation: (1) no setup corrections, (2) on-line corrections determined from bony anatomy, and (3) on-line corrections determined from gold markers. Method and Materials: Three radiation oncologists independently delineated the CTV on computed tomography images of 30 prostate cancer patients. Eight repeat scans were acquired to allow simulation of the delivered dose distributions in changing geometry. Different registration approaches were taken to mimic the different setup strategies. A surface model-based deformable image registration system was used to warp the delivered dose distributions back to the dose in the planning computed tomography scan. On the basis of the geometric extent of the underdosed areas, a set of anisotropic margins was derived to ensure a minimal dose to the CTV of 95% for 90% of the patients. Results: Without setup correction, margins of approximately 11 mm for the corpus of the prostate and 15 mm for the seminal vesicles were required. These margins could be reduced to 8 and 13 mm when aligning the patient to the bony anatomy and to 3 and 8 mm aligning the patient to implanted gold markers. A larger margin at the apex was required to account for the significant observer variability and steep dose gradients at this location (11 mm using skin marker registration, 9 mm using bony anatomy registration, and 6 mm using gold marker registration). Conclusions: Novel voxel tracking techniques have enabled us to calculate accumulated dose distributions and design accurate three-dimensional CTV-to-PTV margins for prostate irradiation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗