Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WHEELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Puffer: Pop-Up Flat Folding Explorer Robot

A repeatably reconfigurable robot, comprising at least two printed circuit board (PCB) rigid sections, at least one PCB flexible section coupled to the at least two PCB rigid sections, at least one wheel, hybrid wheel propeller, wheel and propeller, or hybrid wheel screw propeller rotatably coupled to at least one of the at least two PCB rigid sections and at least one actuator coupled to the at least two PCB rigid sections, wherein the at least one actuator folds and unfolds the repeatably reconfigurable robot.

Karras, Jaakko T.↗

Development of the Resource Prospector Planetary Rover

The Resource Prospector (RP) is an In-­‐Situ Resource Utilization (ISRU) lunar rover mission under study by NASA. RP is planned to launch in 2020 to prospect for subsurface volatiles and to extract oxygen from lunar regolith. The mission will address several of NASA's "Strategic Knowledge Gaps" for lunar exploration. The mission will also address the Global Exploration Roadmap's strategic goal of using local resources for human exploration. The distribution of lunar subsurface volatiles drives the mission requirement for mobility. The spatial distribution is hypothesized to be governed by impact cratering with the top 0.5 m being patchy at scales of 100 m. The mixing time scale increases with depth (less frequent larger impacts). Consequently, increased mobility reduces the depth requirement for sampling. The target RP traverse will extend 1 km radially from the landing site to sample craters of varying sizes. Sampling craters with different ages will reveal possible volatile emplacement history. In 1 Ga, approximately 60-­70 craters of 10 m diameter form per km2. Thus, the rover will need to sample at least ten of these craters, which may require a total traverse path length of 2-­‐3 km. During 2014-­2015, we developed an initial prototype rover for RP. The current design is a solar powered, four-­wheeled vehicle, with hub motor drive, offset four wheel steering, and active suspension. Active suspension provides capabilities including changing vehicle ride height, traversing comparatively large obstacles, and controlling load on the wheels. All-­wheel steering enables the vehicle to point arbitrarily while roving, e.g., to keep the solar array pointed at the sun while in motion. The offset steering combined with active suspension improves driving in soft soil. The rover's on-­board software utilizes NASA's Core Flight Software, which is a reusable flight software environment. During 2015, we completed the initial rover software build, which provides low-­level hardware interfaces, basic mobility control, waypoint driving, odometry, basic error checking, and camera services. Development of the prototype rover has enabled maturation of many of the subsystems to TRL 5. During the next year, we will conduct integrated testing of concepts of operation, navigation, and remote driving tools. In addition, we will perform environmental tests including radiation (avionics), thermal and thermal/vacuum (mechanisms), and gravity offload (mobility).

robotics↗

Dawn's Mission at Ceres

Dawn is NASA's ninth Discovery class mission. The Dawn spacecraft was designed to orbit both the giant asteroid Vesta and the dwarf planet Ceres in succession, a mission only made possible by the high efficiency of ion propulsion. While the same spacecraft visited both bodies, the mission planning and maneuver execution at the two bodies were necessarily very different. The mission at Vesta benefited from at least three functioningreaction control wheels. At Ceres, all maneuvering and coasting during transfers was done without reaction wheel control due to the loss of the second of four wheels while departing Vesta. Loss of the second wheel made conserving attitude control propellant (hydrazine) critical to achieving mission success at Ceres. To save hydrazine, avoiding unnecessary coasting and attitude turns became essential during the interplanetary cruise to Ceres and for all transfers once at Ceres. In contrast, operations at Vesta did not need to avoid coasting. Operating at Ceres requires being farther from the Sun. Greaterheliocentric distances (approaching 3 AU (Astronomical Units) make Dawn's attitude control constraints while maneuvering more restrictive as a result of reduced control authority.

Whiffen, Gregory J.↗

Towards Articulated Mobility and Efficient Docking for the DuAxel Tethered Robot System

Sites of increasing interest for planetary science,such as craters, cold traps, and vents lie in terrains that are inaccessible to state-of-the-art rovers. The Jet Propulsion Laboratory, in collaboration with Caltech, is actively developing a tethered mobile robot, Axel, for traversing and exploring extremely steep terrain, such as Recurring Slope Lineae on Mars and vertical pits on the Moon. However, on Mars, where landing-site uncertainty is high due to the presence of an atmosphere, Axel may need to traverse several kilometers from its lander untethered due to a finite tether carrying capacity (⇠300m). This paper proposes a novel design for a hybrid mobility system that allows a pair of Axel rovers to dock, lock, and drive long distances as a four-wheeled, articulated steering vehicle. The design improves upon prior efforts to achieve DuAxel mobility by leveraging two actuated docking mechanisms attached on opposite ends of a central module to enable ‘sit/stand’ functionality; the prior DuAxel system was limited to skid steering, which was inefficient due to Axel’s grouser-style, high-friction wheels. In the proposed system, the ‘sit’ configuration is achieved by aligning each dock parallel to the surface, allowing one Axel to detach and explore while the other remains docked and serves as a backup. While ‘sitting’, the central module rests on the ground and is outfitted with shovel-style wedges for passive anchoring to sandy terrain (an optional drill can be integrated for anchoring to rock). In order to ‘stand’, the exploring Axel reattaches, locks, and both docks are rotated until Axel’s tether caster arm is upright and the central module is lifted off the ground. Once upright, each Axel rotates about a pivot point for articulated, all-wheel steering, which is accomplished by applying differential wheel torques. The main contributions of this paper are i) a detailed systems design of the docking mechanism and central module, ii) kinematic modeling of articulated mobility and ‘sit/stand’ docking functionality, and iii) initial testing in a relevant environment to characterize the mobility of the proposed system.

Nesnas, Issa↗

Internal combustion engine system having a power turbine with a broad efficiency range

An engine system incorporating an air breathing, reciprocating internal combustion engine having an inlet for air and an exhaust for products of combustion. A centripetal turbine receives products of the combustion and has a housing in which a turbine wheel is rotatable. The housing has first and second passages leading from the inlet to discrete, approximately 180.degree., portions of the circumference of the turbine wheel. The passages have fixed vanes adjacent the periphery of the turbine wheel and the angle of the vanes in one of the passages is different than those in the other so as to accommodate different power levels providing optimum approach angles between the gases passing the vanes and the blades of the turbine wheel. Flow through the passages is controlled by a flapper valve to direct it to one or the other or both passages depending upon the load factor for the engine.

33 ADVANCED PROPULSION SYSTEMS↗

Highly mobile robot for remote inspection

A robotic vehicle can include a plurality of motors coupled to a plurality of gearboxes, each gearbox of the plurality of gearboxes configured to be rotated, a plurality of nested driveshafts coupled to the plurality of gearboxes and including at least a first driveshaft and a second driveshaft, and a plurality of appendages operably coupled to the plurality of gearboxes. A particular appendage of the plurality of appendages can be configured to be rotated in response to a rotational motion of the first driveshaft. The robotic vehicle can include a plurality of wheels coupled to the plurality of appendages and configured to rotate about a plurality of wheel axles. Each wheel of the plurality of wheels can be configured to cause the robotic vehicle to be transported across a contacting surface in response to the rotational motion of the second driveshaft.

Crane, Carl D.↗

Performance and cost of fuel cells for off-road heavy-duty vehicles

Hydrogen fuel cell-powered off-road vehicles can replace hydrocarbon-powered off-road vehicles to reduce carbon dioxide and criteria pollutant emissions in the agriculture, construction, and mining industries. Vehicle manufacturers and customers recognize health and environmental benefits of emissions reductions but are ultimately compelled by the total cost of ownership of their vehicles. In this study, we conduct a technoeconomic evaluation for three hallmark off-road vehicles, tractors, wheel loaders, and excavators, comparing vehicles with hydrogen fuel cell + battery hybrid powertrains to traditional diesel powertrains. Stakeholder-valued performance metrics include fuel cell engine power, engine durability, hydrogen consumption rate, hydrogen storage system volume, and energy-regenerative drivetrain efficiency. The total cost of ownership includes capital, operating and maintenance, fuel, and fuel storage costs. State-of-the-art fuel cell powered wheel loaders and excavators are currently cost competitive with diesel platforms. If targeted improvements to cost, performance, and durability improvements of fuel cell stacks and storage systems are achieved, fuel cell systems would be cost competitive for tractors and significantly lower total cost of ownership options for wheel loaders and excavators.

33 ADVANCED PROPULSION SYSTEMS↗

Jack Rabbit Pretest Shadowplate Drawings For TATB IHE Model Development

The Jack Rabbit Pretest (PT) series consisted of 5 focused hydrodynamic experiments 2021E PT3, PT4, PT5, PT6, and PT7. They were fired in March and April of 2008 at the Contained Firing Facility, Site 300, Lawrence Livermore National Laboratory, Livermore, California. These experiments measured deadzone formation and impulse gradients created during the detonation of TATB based insensitive high explosive. When setting up computer simulations of the Jack Rabbit Pretest series, the modeler or code developer can execute simulations with increasing degrees of refinement using detail found in the shadowplate design. The easiest way to get started is by treating the shadowplate in each experiment as a monolithic homogeneous piece of stainless steel. The simulation of detonation would begin as a point initiation below the center, bottom surface of the shadowplate. The detonation running through the ultrafine TATB booster can be simulated using program burn and then switched over to a reactive flow detonation model as the detonation front crosses the boundary into the main charge LX-17 IHE. A modeler wanting to further refine the simulation and progression of shock through the shadowplate can use the more detailed shadowplate design information presented in this document. The source drawings are included in Appendix A of this document. Their titles and drawing numbers are listed. Each experiment's shadowplate consists of two major components. A 303 stainless steel shape that defines the outer dimensions of shadowplate and a cylindrical 303 stainless steel detonator housing that is located in a closely machined pocket in the shape. The SIMPLE ASSY drawing accurately represents the dimensions of the outer shape, it's machined cylindrical pocket, and detonator body which is treated as a monolithic, homogeneous piece of stainless steel. The detonator body cross section shows an accurately dimensioned void where the slapper flyer barrel, LX-16 (pressed PETN) pellet, and pellet can flyer barrel are located. The FULL ASSY drawing accurately represents the dimensions of the outer shadowplate shape and it's machined pocket. The detonator dimensions and materials are detailed in cross section and exploded view. All diameters, thicknesses, and materials are called out in the drawing. You will notice that the detonator includes a multilayer slapper assembly with two layers of electrically insulating Kapton sandwiching the copper foil bridge circuit. The Kapton insulated circuit is sandwiched between two thin stainless steel sheets. This slapper assembly is secured to the detonator body with two screws. There is a 0.25 mm gap between the slapper assembly and the outer shadowplate shape. The stainless steel detonator body contains an off-center titanium wheel. This titanium wheel is secured to the detonator body with one screw and two pins to maintain position and orientation of the pellet can assembly in the center of the detonator body. The titanium wheel contains a tantalum/tungsten washer and pellet can assembly. The pellet can assembly consists of a pressed LX-16 initiator pellet contained in an extruded aluminum foil can. It may be useful for the modeler to include some of the details of the shadowplate and detonator design to further refine simulations of the Jack Rabbit Pretest experiments. These details may be relevant to the progression of shock originating from the PETN initiation pellet and ultrafine TATB booster that propagates through the shadowplate.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modelling of Metal Removal in Reverse Zones in the Process of Internal Grinding

The removal of metal during reverse motion of the grinding wheel at extreme cross sections of holes in the workpiece during internal grinding is considered. In a single double pass of the wheel, the vibration of the contact area and the cutting forces are found to be significantly different in reverse motion within input and output holes. That disrupts the stability of metal removal and the machining precision over the length of the hole being machined. Approaches to the modeling of internal grinding with reverse motion of the grinding wheel are considered.

42 ENGINEERING↗

Design of a Proportional-Control-Based Advanced Control Strategy for Independent Temperature and Humidity Control of a Pre-Cooled Desiccant Air Cooling System

In this study, the control of a desiccant-wheel-based evaporative cooling system with a double-layer dew-point cooler system is emphasized. There are two dew-point evaporative coolers in the system and the air taken inside is subjected to pre- and post-cooling processes. The dehumidification process of the air taken in is carried out by the desiccant wheel after the pre-cooling process. A proportional-based control strategy has been developed to adjust the temperature and relative humidity of the room quickly and robustly with different operation modes for actuators to bring comfort with less energy consumption. In addition, an automatic Stop/Run mode has been added to the control strategy to save extra energy. With the developed control strategy, enabling the actuators to switch between the operation modes, more energy savings are achieved compared to both traditional ON/OFF and proportional controls. The accuracy and applicability of the developed control strategy were analyzed and it was observed that the room comfort reached the desired levels successfully under all disruptive effects. The control inputs and the energies consumed by all the actuators were investigated and it was determined that 21.19% more energy savings are provided by adding the automatic Stop/Run feature. With the multi-mode control strategy, a total of 40.90% less energy consumption is achieved compared to the classical ON/OFF control technique. Thus, it is seen that the controller developed for the desiccant-wheel-based evaporative cooler is a viable method to provide fast and robust comfort conditions with less energy.

42 ENGINEERING↗

Sliding GAIT Algorithm for the All-Terrain Hex-Limbed Extra-Terrestrial Explorer (ATHLETE)

The design of a surface robotic system typically involves a trade between the traverse speed of a wheeled rover and the terrain-negotiating capabilities of a multi-legged walker. The ATHLETE mobility system, with both articulated limbs and wheels, is uniquely capable of both driving and walking, and has the flexibility to employ additional hybrid mobility modes. This paper introduces the Sliding Gait, an intermediate mobility algorithm faster than walking with better terrain-handling capabilities than wheeled mobility.

terrain anomaly↗

Experimental Evaluation of the Scale Model Method to Simulate Lunar Vehicle Dynamics

As compared to driving on Earth, the presence of lower gravity and uneven terrain on planetary bodies makes high speed driving difficult. In order to maintain ground contact and control vehicles need to be designed with special attention to dynamic response. The challenge of maintaining control on the Moon was evident during high speed operations of the Lunar Roving Vehicle (LRV) on Apollo 16, as at one point all four tires were off the ground; this event has been referred to as the Lunar Grand Prix. Ultimately, computer simulation should be used to examine these phenomena during the vehicle design process; however, experimental techniques are required for the validation and elucidation of key issues. The objectives of this study were to evaluate the methodology for developing a scale model of a lunar vehicle using similitude relationships and to test how vehicle configuration, six or eight wheel pods, and local tire compliance, soft or stiff, affect the vehicles dynamic performance. A wheel pod consists of a drive and steering transmission and wheel. The Lunar Electric Rover (LER), a human driven vehicle with a pressurized cabin, was selected as an example for which a scale model was built. The scaled vehicle was driven over an obstacle and the dynamic response was observed and then scaled to represent the full-size vehicle in lunar gravity. Loss of ground contact, in terms of vehicle travel distance with tires off the ground, was examined. As expected, local tire compliance allowed ground contact to be maintained over a greater distance. However, switching from a six-tire configuration to an eight-tire configuration with reduced suspension stiffness had a negative effect on ground contact. It is hypothesized that this was due to the increased number or frequency of impacts. The development and testing of this scale model provided practical lessons for future low-gravity vehicle development.

Moon↗

Assessing Impact of Joint Actuator Failure on Lunar Rover Mobility

Wheeled rovers are critical to exploration of the lunar surface, and loss of mobility actuators can have mission-ending consequences. NASA’s upcoming Volatiles Investigating Polar Exploration Rover (VIPER) has a four-wheeled active suspension, which gives it flexible extreme terrain mobility at the cost of an increased number of mobility actuators and potentially a higher mobility cost due to actuator loss than might occur on a similar six-wheeled rover. Impact varies greatly by both the affected joint and its failure state, and that in some cases modification of driving strategy may be able to partially mitigate mobility impact.

rover↗

Surface oxidation and crystallization of FeNi-Based soft magnetic nanocrystalline and amorphous nanocomposite alloys

In this work, we present characterization of surface oxidation and crystallization behavior of Metal Amorphous Nanocomposite (MANC) (Fe 70 Ni 30 ) 80 Nb 4 Si 2 B 14 alloys via complementary x-ray diffraction, electron microscopy, and x-ray photoelectron spectroscopy techniques. An adherent amorphous oxide of roughly 15–20 nm in thickness is observed on the wheel side of the ribbon, enriched in Fe relative to Ni and with significant content of Si and Nb as would be expected based upon a comparison of the Gibbs free energy of formation of the stable oxide phases. The amorphous character of the oxide is likely to result from the significant Si-content coupled with the amorphous and nanocrystalline character of the underlying metallic layer. Higher density of FeNi-enriched nanocrystals is also observed within ~100 nm of the wheel-side surface, presumably due to reduction in local glass former concentration. A rough, crystalline copper oxide layer is also present and forms through contact between the copper wheel and the solidifying melt during the rapid solidification process. On the air side of the ribbon, a crystalline oxide layer of ~15–20 nm is formed as well as intergranular oxidation that penetrates along the grain boundaries between highly textured surface crystallites of ~50–100 nm in size. The crystalline nature of the oxide on these surfaces is asserted to result from the lack of significant Si-content and the pre-existing surface crystallites that form during the rapid solidification process which promote a crystalline oxide surface layer. Furthermore, these results shed new insights into the details of surface oxidation and can help to inform processing and alloy composition adjustments which seek to tailor surface properties.

36 MATERIALS SCIENCE↗

Synthesis of CeFe10.5Mo1.5 with ThMn12-type structure by melt spinning

Rare earth compounds RFe12_xMx with tetragonal ThMn12-type structure are of great research interest for potential applications as permanent magnets. These materials are known to serve as the precursors for nitriding and hydriding processes which in certain conditions can dramatically increase the Curie temperature, spontaneous magnetization, and affect the magnetic anisotropy. In this paper, we report the phase study of CeFe10.5Mo1.5 samples melt spun at various surface wheel speeds vs between 5 m/s and 60 m/s. The results from quantitative Rietveld analysis indicate that the as-spun ribbons are a mixture of primary CeFe10.5Mo1.5 phase with impurity phases such as Ce2Fe17, Fe-Mo alloy and CeFe2. When the wheel speed vs is below 25 m/s, CeFe10.5Mo1.5 phase accounts for greater than 85 wt% in the as-spun ribbons, while the Fe-Mo alloy is the only detectable impurity phase. Above v(s)=25 m/s, as the wheel speed increases, CeFe10.5Mo1.5 phase decreases monotonically to about 60 wt% at v(s)=6O m/s while the amounts of impurity phases increase. Thermogravimetric measurement indicates that the Curie temperature T-c. corresponding to CeFe10.5Mo1.5 phase is 341 K. As a result, the best performing sample melt spun at v(s),=15 m/s only exhibits an energy product BHmax=0.121 MGOe at room temperature. Although such a number is modest for a permanent magnet, further nitriding is expected to greatly enhance the Curie temperature, and hence the magnetic performance. (C) 2013 Elsevier B.V. All rights reserved.

Zhou, C↗

Five new Mn(II)/Co(II) coordination polymers constructed from flexible multicarboxylate ligands with varying magnetic properties

Five new Mn(II)/Co(II) coordination polymers [Mn{sub 2}(Adi){sub 2}(DMA)]{sub n} (1), [Mn{sub 2}(Adi){sub 2}(DMF)]{sub n} (2), [Mn{sub 4}(Adi){sub 4}(DMF){sub 2}]{sub n} (3), [Co{sub 4}(Adi){sub 4}(DMF){sub 2}]{sub n} (4) and ([Co{sub 3}(Cit){sub 2}(H{sub 2}O){sub 3}]·(H{sub 2}O)){sub n} (5) [Adi=adipate anion, Cit=citrate anion, DMA=N,N′-dimethylacetamide and DMF=N,N′-dimethylformamide] have been successfully constructed from two flexible multicarboxylate ligands under solvothermal conditions. Complexes 1 and 2 exhibit 2-D network featured 1-D Mn{sup II} chain, 3 and 4 are 3-D frameworks containing different 1-D carboxylate–metal chain, while 5 shows a 3-D structure based on Co{sub 6} wheel clusters. Magnetic investigations indicate antiferromagnetic behaviors for 1–4 and weak ferromagnetic behavior for 5 because of distinct linkage modes of metal ions. - Graphical abstract: Five new Mn(II)/Co(II) coordination polymers display 2-D/3-D structures containing 1-D carboxylate–metal chains or wheel clusters. Magnetic analyses reveal that they show antiferromagnetic, canted antiferromagnetic and weak ferromagnetic behaviors, respectively. Highlights: ●Five new Mn(II)/Co(II) coordination polymers have been synthesized. ●A complex-based Co{sub 6} wheel cluster was obtained. ●The different magnetic properties of the complexes are discussed.

36 MATERIALS SCIENCE↗

Synthesis, structure and properties of zinc(II) coordination polymers with 9H-carbazole-2,7-dicarboxylic acid

From a new dicarboxylate ligand, 9H-carbazole-2,7-dicarboxylic acid (2,7-H{sub 2}CDC), three Zn(II) metal-organic frameworks were synthesized in the absence or presence of ditopic N-donor ligands. They are formulated as [Zn{sub 5}(μ{sub 3}-OH){sub 2}(2,7-CDC){sub 4}(DEF){sub 2}] (1) (DEF=N,N-diethylformamide), [Zn{sub 2}(2,7-CDC){sub 2}(DABCO)(H{sub 2}O)]·5DMF·H{sub 2}O (2) (DABCO=1-diaza-bicyclo[2.2.2]octane, DMF=N,N-dimethylformamide), and [Zn{sub 2}(2,7-CDC){sub 2}(bpea)]·3DMA·2 H{sub 2}O (3) (bpea=1,2-bis(4-pyridyl)ethylane, DMA=N,N-dimethylacetamide). Compounds 1 and 3 display the 3D pcu frameworks. In 1 the unusual pentanuclear [Zn{sub 5}(μ{sub 3}-OH){sub 2}(COO){sub 8}] secondary building units (SBUs) are linked by dicarboxylate ligands. Differently, in 3 the well-known paddle–wheel [Zn{sub 2}(COO){sub 4}] SBUs are linked by dicarboxylate and dipyridyl ligands. Compound 2 shows the rare self-catenated 3D alb-3,6-C2/c net topology based on the dinuclear paddle–wheel SBU and a mononuclear unit. The stability and fluorescent properties of the compounds have been studied. - Graphical abstract: A new dicarboxylate ligand, 9H-carbazole-2,7-dicarboxylic acid, was used to construct Zn(II) metal-organic frameworks, including a novel self-catenated network with the rare 3D alb-3,6-C2/c net and two pcu-type networks based on an unprecedented pentanuclear clusters and the common paddle–wheel units. The compounds show blue fluorescent properties. Display Omitted - Highlights: • MOFs with a new carbazole-based dicarboxylate ligand. • New pentanuclear [Zn{sub 5}(μ{sub 3}-OH){sub 2}(COO){sub 8}] secondary building unit. • The rare self-catenated 3D alb-3,6-C2/c net.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An interpenetrated pillared-layer MOF: Synthesis, structure, sorption and magnetic properties

A new three-dimensional porous framework [Co{sub 2}(bpdc){sub 2}(H{sub 2}bpz)]∙2(DMF)·5(H{sub 2}O) (1) (H{sub 2}bpdc=4,4′-biphenyldicarboxylic acid, H{sub 2}bpz=3,3′,5,5′-tetramethyl-4,4′-bipyrazole) has been solvothermally synthesized by employing mixed H{sub 2}bpdc and H{sub 2}bpz ligands. 1 is a pillared-layer framework based on a binuclear paddle-wheel Co{sub 2}(O{sub 2}C-R){sub 4} cluster, and exhibits a 2-fold interpenetrated 6-connected pcu topology. H{sub 2}bpz bridges Co{sub 2}(O{sub 2}C-R){sub 4} clusters with an angular coordination configuration to form interesting left- and right-handed helical chains. 1 possesses a two-dimensional porous system decorated by uncoordinated pyrazole –NH groups of H{sub 2}bpz, leading to high adsorption selectivities for CO{sub 2} over N{sub 2} and H{sub 2}. In addition, the strong antiferromagnetic interactions between the Co{sup 2+} ions in cluster were observed. - Graphical abstract: A new pillared-layer porous framework has been constructed by paddle-wheel Co{sub 2}(O{sub 2}C-R){sub 4} cluster and H{sub 2}bpdc–H{sub 2}bpz mixed ligands, displaying adsorption selectivity and antiferromagnetic properties. Display Omitted - Highlights: • We present a new pillared-layer framework based on paddle-wheel Co{sub 2}(O{sub 2}C-R){sub 4} cluster. • The framework possesses a 2-fold interpenetrated pcu topology. • The framework displays adsorption selectivity and antiferromagnetic properties.

36 MATERIALS SCIENCE↗