SEARCH · Engineering Papers

Results for “WAKEFULNESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

All sources NASA NTRS DOE OSTI

NASA NTRS1987

Helicopter blade-vortex interaction locations: Scale-model acoustics and free-wake analysis results

The results of a model rotor acoustic test in the Langley 4by 7-Meter Tunnel are used to evaluate a free-wake analytical technique. An acoustic triangulation technique is used to locate the position in the rotor disk where the blade-vortex interaction noise originates. These locations, along with results of the rotor free-wake analysis, are used to define the geometry of the blade-vortex interaction noise phenomena as well as to determine if the free-wake analysis is a capable diagnostic tool. Data from tests of two teetering rotor systems are used in these analyses.

Hoad, Danny R.↗

NASA NTRS1986

Effect of an upstream wake on a pusher propeller

An analytical/computational study has been conducted to predict the effect of an upstream wake on an operating propeller. The upstream wing/pylon was modeled by a constant chord wing of NACA 0012 sections and was placed at a variable distance (0.1 - 0.3 chord) upstream of a scaled model propeller (SR-2). The wake model was a similarity formulation. The periodic behavior ofthe flow during the passage through the wake was formulated in terms of time-dependent variation of each blade section's angle of attack. It was found that the final expressions for the unsteady pressure distribution on each blade section are periodic and that the unsteady circulation and lift coefficieents exhibit a hysteresis loop.

Takallu, M. A.↗

NASA NTRS1986

Unsteady heat transfer and direct comparison to steady-state measurements in a rotor-wake experiment

Circumferentially local and time-resolved heat transfer measurements were obtained for a circular cylinder in crossflow located downstream of a rotating spoked wheel wake generator in a steady flow tunnel. The unsteady heat transfer effects were obtained by developing an extension of a thin film gauge technique employed to date exclusively in short-duration facilities. The time-average thin film results and conventional steady-state heat transfer measurements were compared. Time-averaged wake-induced stagnation heat transfer enhancement levels above the nowake case were about 10 percent for the four cylinder Reynolds numbers. This enhancement level was nearly independent of bar passing frequency and was related directly to the time integral of the heat transfer spikes observed at the bar passing frequency. It is observed that the wake-induced heat transfer spikes have peak magnitudes averaging 30 to 40 percent above the interwake heat transfer level.

Obrien, J. E.↗

NASA NTRS1987

Self-similar potential in the near wake

The plasma potential is measured near the edge of an electrically floating obstacle placed in a steady-state, supersonic, unmagnetized, neutral plasma flow. Equipotential contours show the sheath of the upstream side of the obstacle wrapping around the edge of the obstacle and fanning out into the near wake. Both fluid theory and the data find the near-wake plasma potential to be self-similar when ionization, charge exchange, and magnetic field can be neglected. The theory also finds that fluid velocity is self-similar, the near wake is nonneutral, and plasma density is not self-similar. Strong electric fields are found near the obstacle and equipotential contours are found to conform to all boundaries.

Diebold, D.↗

NASA NTRS1988

Characteristics of merging shear layers and turbulent wakes of a multi-element airfoil

Flow characteristics in the vicinity of the trailing edge of a single-slotted airfoil flap are presented and analyzed. The experimental arrangement consisted of a NACA 4412 airfoil equipped with a NACA 4415 flap whose angle of deflection was 21.8 deg. The flow remained attached over the model surfaces except in the vicinity of the flap trailing edge where a small region of boundary-layer separation extended over the aft 7 percent of flap chord. The flow was complicated by the presence of a strong, initially inviscid jet emanating from the slot between airfoil and flap, and a gradual merging of the main airfoil wake and flap suction-side boundary layer. Downstream of the flap, the airfoil and flap wakes fully merged to form an asymmetrical curved wake. The airfoil configuration was tested at an angle of attack of 8.2 deg, at a Mach number of 0.09, and a chord based Reynolds number of 1.8 x 10 to the 6th power in the Ames Research Center 7- by 10-Foot Wind Tunnel. Surface pressure measurements were made on the airfoil and flap and on the wind tunnel roof and floor. It was estimated that the wall interference increased the C sub L by 7 percent and decreased the C sub M by 4.5 percent. Velocity characteristics were quantified using hot-wire anemometry in regions of flow with preferred direction and low turbulence intensity. A 3-D laser velocimeter was used in regions of flow recirculation and relatively high turbulence intensity.

Adair, Desmond↗

NASA NTRS1988

Biological Rhythms, Sleep, and Wakefulness in Prolonged Confinement

The dysynchronization of human circadian rhythms during 7 long-term (2 to 6 months) confinement experiments in temporal isolation in caves was studied. Five subjects abandon the circadian period of sleep and wakefulness (S-W) and spontaneously reach a circabidian S-W cycle (34 to 36 hr waking, 14 to 12 hr sleep) they maintain during weeks. Some subjects reach the 48 hr cycle very quickly (8 to 15 days), others after months. Polygraphic analyses of sleep show that rapid eye movement state (REMS) duration is directly proportional to the total duration of sleep and that the ultradian periodicity of REMS remains constant when S-W cycle is circadian or circabidian. When S-W cycle desynchronizes from circadian to circabidian, REMS and S-4 increase at the expense of stages I-2 and remain in constant relationship with the duration of previous wakefulness period.

M Siffre↗

NASA NTRS1987

Effect of object potentials on the wake of a flowing plasma

The structure of the electric potential and ion density of the ion front in the near wake created by the flow of synthetic plasma past a conducting plate was investigated experimentally and numerically, with particular attention given to the effect of plate potential on the structure of the ion front. Results were obtained for a molecular nitrogen plasma with ambient electron densities of about 100,000/cu cm, ion temperatures of about 0.025 eV, electron temperatures of about 0.3 eV, and plasma flow velocities of about 10,000 m/s. Two-dimensional simulations of the laboratory experiments were performed by using a multiple waterbag technique. The calculated and experimental results show that wake closure is well described by the acceleration of ions in the plasma steady-state electric field. However, the ion-front motion is strongly affected by the imposed potential of the object creating the wake.

Katz, I.↗

NASA NTRS1987

Aerodynamic interaction between vortical wakes and lifting two-dimensional bodies

Unsteady rotor wake interactions with the empenage, tail boom, and other aerodynamic surfaces of a helicopter have a significant influence on its aerodynamic performance, the ride quality, and amount of vibration. A numerical method for computing the aerodynamic interaction between an interacting vortex wake and the viscous flow about arbitrary two-dimensional bodies has been developed to address this helicopter problem. The method solves for the flow field velocities on a body-fitted computational mesh using finite-difference techniques. The interaction of a rotor wake with the flow about a 4:1 elliptic cylinder at 45-deg incidence was calculated for a Reynolds number of 3000.

Stremel, Paul M.↗

NASA NTRS1987

Intercomparison among plasma wake models for plasmaspheric and ionospheric conditions

The angular distributions of ions in the wake of a body moving through a space plasma computed from three different models are compared in order to investigate wake current depletion ratios under conditions simulating the topside ionosphere and plasmasphere. Results demonstrate the importance of taking into account the thermal flux at low Mach numbers and the angular acceptance of ion detectors in making theory-experiment comparisons. For all models considered, gradients in the angular variations of the fluxes are shown to be steeper near the wake-ambient interface than closer to the maximum rarefaction region.

Samir, U.↗

NASA NTRS1988

The effect of acoustic forcing on trailing edge separation and near wake development of an airfoil

An experimental study was conducted to investigate the effect of acoustic forcing on flow fields near the trailing edge of a symmetric airfoil at zero angle of attack. At low chord Reynolds numbers, the boundary layers separate from the surfaces in the rear part of the airfoil and create recirculation regions near the trailing edge. It is shown that with the introduction of acoustic forcing through a slot in the vicinity of the separation point, periodic large-scale structures are generated in the trailing edge region. Significant reduction of trailing edge separation is achieved. It is also found that the most effective forcing frequency to control trailing edge separation is the wake vortex shedding frequency. As a result of forcing, applied only on the upper surface, the upper boundary layer is accelerated and the flow over the lower surface decelerated. Consequently, an asymmetric wake is formed. The results presented indicate that the development of the near wake varies with forcing conditions.

Huang, L. S.↗

NASA NTRS1988

Observations of the frequencies in a sphere wake and of drag increase by acoustic excitation

Vortex shedding and instability wave frequencies have been measured in the wakes of spheres in the Reynolds number range 500 less than Re less than 60,000. The effect of acoustic excitation was examined and an interaction between the two frequency modes was found at the lower Reynolds numbers; through this interaction, external forcing at the instability frequency could change the vortex shedding frequency. The development of the mean wake was manipulated by forcing near to the dominant shear layer instability frequency. With this forcing, the separated shear layer moved closer to the surface of the sphere and the reversed flow region of the wake was shortened. Concomitantly, the base pressure decreased and drag increased.

Kim, H. J.↗

NASA NTRS1989

On the large-scale structure of the turbulent wake of a flat plate

A simple heat-tagging technique was used to isolate and analyze the large-scale coherent structures present in the two-dimensional wake of a flat plate. The results indicate the presence of these coherent structures even at 250 momentum thicknesses downstream of the trailing edge. These structures have a vortexlike topology and carry a significant amount of the total shear stress. The present results for the flat-plate wake seem to be in general agreement with those that have been obtained in cylinder wakes by other comtemporary investigators using more complex techniques of eduction and signal enhancement.

Jovic, S.↗

NASA NTRS1989

Near wakes of advanced turbopropellers

The flow in the wake of a model single rotation Prop-Fan rotor operating in a wind tunnel was traversed with a hot-wire anemometer system designed to determine the 3 periodic velocity components. Special data acquisition and data reduction methods were required to deal with the high data frequency, narrow wakes, and large fluctuating air angles in the tip vortex region. The model tip helical Mach number was 1.17, simulating the cruise condition. Although the flow field is complex, flow features such as viscous velocity defects, vortex sheets, tip vortices, and propagating acoustic pulses are clearly identified with the aid of a simple analytical wake theory.

Hanson, D. B.↗

NASA NTRS1988

Effects of wake passing on stagnation region heat transfer

In the present experimental study, an annular-flow wind tunnel fitted with a spoked-wheel wake generator was used to ascertain both time-averaged and time-resolved effects of wake passing in a cylinder stagnation region; the cylindrical spokes generated wakes simulating those of a turbine inlet guide vanes. The time-averaged heat transfer results obtained indicate an asymmetric heat-transfer coefficient distribution about the stagnation line, with higher heat-transfer coefficients on the side corresponding to the suction side of the turbine blade. Spectra of the hot-film records indicate that vortex-shedding is a major contributor to the unsteady buffeting of the test-cylinder boundary layer at circumferential stations located at both + and -60 deg from the stagnation line, despite making only a minor contribution to the stagnation line itself.

O'Brien, J. E.↗

NASA NTRS1989

The dynamics of charged particles in the near wake of a very negatively charged body - Laboratory experiment and numerical simulation

A numerical simulation that is cylindrical in configuration space and three-dimensional in velocity space has been initiated to test a model for the near-wake dynamics of a very negatively charged body, with reference to the plasma environment around spacecraft. The simulation parameters were closely matched to those of a laboratory experiment so that the results can be compared directly. The laboratory study showed that the electrons and ions can display different temporal features in the filling-in of the wake; and that they can both be found within one body diameter of an object with a highly negative body potential. It was also found that the temperature of the electrons in the very near wake could be somewhat colder than the ambient value, suggesting the possibility of a filtering mechanism being operative there. The simulation results to date largely corroborate the density findings.

Morgan, M. Alvin↗

NASA NTRS1989

Optimization of rotor performance in hover and axial flight using a free wake analysis

Performance optimization for rotors in hover and axial flight is a topic of continuing importance to rotorcraft designers. The aim of this effort was to demonstrate that a numerical performance optimization algorithm could be coupled to an existing free wake hover code. This code, dubbed EHPIC (Evaluation of Hover Performacne using Influence Coefficients), uses a quasi-linear wake relaxation to solve for the rotor performance. The coupling was accomplished by expanding of the matrix of linearized influence coefficients in EHPIC to accommodate design variables and by deriving new coefficients for linearized equations governing perturbations in power and thrust. These coefficients formed the input to a linear optimization analysis, which used the flow tangency conditions on the blade and in the wake to impose equality constraints on the expanded system of equations; user-specified inequality constraints were also employed to bound the changes in the design. It was found that this locally linearized analysis could be invoked to predict a design change that would produce a reduction in the power required by the rotor at constant thrust. Thus, an efficient search for improved versions of the baseline design can be carried out while retaining the accuracy inherent in a free wake/lifting surface performance analysis. A variety of sample problems were undertaken to demonstrate the success of this approach in reducing the power required at a specified thrust for several representative rotor configurations in hover and axial flight.

Quackenbush, T. R.↗

NASA NTRS1990

Wake coupling to full potential rotor analysis code

The wake information from a helicopter forward flight code is coupled with two transonic potential rotor codes. The induced velocities for the near-, mid-, and far-wake geometries are extracted from a nonlinear rigid wake of a standard performance and analysis code. These, together with the corresponding inflow angles, computation points, and azimuth angles, are then incorporated into the transonic potential codes. The coupled codes can then provide an improved prediction of rotor blade loading at transonic speeds.

Torres, Francisco J.↗

NASA NTRS1991

The computation of induced drag with nonplanar and deformed wakes

The classical calculation of inviscid drag, based on far field flow properties, is reexamined with particular attention to the nonlinear effects of wake roll-up. Based on a detailed look at nonlinear, inviscid flow theory, it is concluded that many of the classical, linear results are more general than might have been expected. Departures from the linear theory are identified and design implications are discussed. Results include the following: Wake deformation has little effect on the induced drag of a single element wing, but introduces first order corrections to the induced drag of a multi-element lifting system. Far field Trefftz-plane analysis may be used to estimate the induced drag of lifting systems, even when wake roll-up is considered, but numerical difficulties arise. The implications of several other approximations made in lifting line theory are evaluated by comparison with more refined analyses.

Kroo, Ilan↗