Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VARIATION METHOD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

High-efficiency grid-connected photovoltaic module integrated converter system with high-speed communication interfaces for small-scale distribution power generation

This paper presents a high-efficiency grid-connected photovoltaic (PV) module integrated converter (MIC) system with reduced PV current variation. The proposed PV MIC system consists of a high-efficiency step-up DC-DC converter and a single-phase full-bridge DC-AC inverter. An active-clamping flyback converter with a voltage-doubler rectifier is proposed for the step-up DC-DC converter. The proposed step-up DC-DC converter reduces the switching losses by eliminating the reverse-recovery current of the output rectifying diodes. To reduce the PV current variation introduced by the grid-connected inverter, a PV current variation reduction method is also suggested. The suggested PV current variation reduction method reduces the PV current variation without any additional components. Moreover, for centralized power control of distributed PV MIC systems, a PV power control scheme with both a central control level and a local control level is presented. The central PV power control level controls the whole power production by sending out reference power signals to each individual PV MIC system. The proposed step-up DC-DC converter achieves a high-efficiency of 97.5% at 260 W output power to generate the DC-link voltage of 350 V from the PV voltage of 36.1 V. The PV MIC system including the DC-DC converter and the DC-AC inverter achieves a high-efficiency of 95% with the PV current ripple less than 3% variation of the rated PV current. (author)

14 SOLAR ENERGY↗

Comparison of Traditional Design Nonlinear Programming Optimization and Stochastic Methods for Structural Design

Structural design generated by traditional method, optimization method and the stochastic design concept are compared. In the traditional method, the constraints are manipulated to obtain the design and weight is back calculated. In design optimization, the weight of a structure becomes the merit function with constraints imposed on failure modes and an optimization algorithm is used to generate the solution. Stochastic design concept accounts for uncertainties in loads, material properties, and other parameters and solution is obtained by solving a design optimization problem for a specified reliability. Acceptable solutions were produced by all the three methods. The variation in the weight calculated by the methods was modest. Some variation was noticed in designs calculated by the methods. The variation may be attributed to structural indeterminacy. It is prudent to develop design by all three methods prior to its fabrication. The traditional design method can be improved when the simplified sensitivities of the behavior constraint is used. Such sensitivity can reduce design calculations and may have a potential to unify the traditional and optimization methods. Weight versus reliabilitytraced out an inverted-S-shaped graph. The center of the graph corresponded to mean valued design. A heavy design with weight approaching infinity could be produced for a near-zero rate of failure. Weight can be reduced to a small value for a most failure-prone design. Probabilistic modeling of load and material properties remained a challenge.

Patnaik, Surya N.↗

Variational multiscale turbulence modelling in a high order spectral element method

In the variational multiscale (VMS) approach to large eddy simulation (LES), the governing equations are projected onto an a priori scale partitioning of the solution space. This gives an alternative framework for designing and analyzing turbulence models. We describe the implementation of the VMS LES methodology in a high order spectral element method with a nodal basis, and discuss the properties of the proposed scale partitioning. The spectral element code is first validated by doing a direct numerical simulation of fully developed plane channel flow. The performance of the turbulence model is then assessed by several coarse grid simulations of channel flow at different Reynolds numbers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A variational mimetic finite difference method for elliptic interface problems on non-matching polytopal meshes with geometric interface inconsistencies

A new variational mimetic finite difference method for elliptic interface problems with perfect and imperfect thermal contacts on non-matching polytopal meshes with geometric interface inconsistencies is developed and analyzed theoretically and numerically. The method is defined on multiple non-matching submeshes with gaps and overlaps along their interfaces. The discrete equations are derived from a minimization problem for the augmented Dirichlet functional. For a perfect thermal contact, the functional uses a modified mimetic gradient with extended stencil which couples unknowns from both sides of an interface, as well as penalty terms to enforce weak continuity of temperature across the interface. The method leads to a symmetric positive definite matrix for any scaling of the penalty terms. For an imperfect thermal contact, the Dirichlet functional is supplemented with a quadratic jump term along the interface related to the interface thermal resistance. We prove that the method conserves the total heat flux across each interface. In conclusion, the obtained results are verified with numerical experiments showing convergence in the discrete L 2 and L ∞ norms.

97 MATHEMATICS AND COMPUTING↗

A variationally coupled FE-BE method for elasticity and fracture mechanics

A new method for coupling finite element and boundary element subdomains in elasticity and fracture mechanics problems is described. The essential feature of this new method is that a single variational statement is obtained for the entire domain, and in this process the terms associated with tractions on the interfaces between the subdomains are eliminated. This provides the additional advantage that the ambiguities associated with the matching of discontinuous tractions are circumvented. The method leads to a direct procedure for obtaining the discrete equations for the coupled problem without any intermediate steps. In order to evaluate this method and compare it with previous methods, a patch test for coupled procedures has been devised. Evaluation of this variationally coupled method and other methods, such as stiffness coupling and constraint traction matching coupling, shows that this method is substantially superior. Solutions for a series of fracture mechanics problems are also reported to illustrate the effectiveness of this method.

Lu, Y. Y.↗

FAST INVERSION METHOD FOR DETERMINATION OF PLANETARY PARAMETERS FROM TRANSIT TIMING VARIATIONS

The transit timing variation (TTV) method relies on monitoring changes in timing of transits of known exoplanets. Non-transiting planets in the system can be inferred from TTVs by their gravitational interaction with the transiting planet. The TTV method is sensitive to low-mass planets that cannot be detected by other means. Here we describe a fast algorithm that can be used to determine the mass and orbit of the non-transiting planets from the TTV data. We apply our code, ttvim.f, to a wide variety of planetary systems to test the uniqueness of the TTV inversion problem and its dependence on the precision of TTV observations. We find that planetary parameters, including the mass and mutual orbital inclination of planets, can be determined from the TTV data sets that should become available in near future. Unlike the radial velocity technique, the TTV method can therefore be used to characterize the inclination distribution of multi-planet systems.

79 ASTRONOMY AND ASTROPHYSICS↗

Correction method for obtaining the variationally best ground-state pair density

We present a correction method for the pair density (PD) to get close to the ground-state one. The PD is corrected to be a variationally best PD within the search region that is extended by adding the uniformly scaled PDs to its elements. The corrected PD is kept N-representable and satisfies the virial relation rigorously. The validity of the present method is confirmed by numerical calculations of neon atom. It is shown that the root-mean-square error of the electron-electron interaction and external potential energies, which is a good benchmark for the error of the PD, is reduced by 69.7% without additional heavy calculations.

74 ATOMIC AND MOLECULAR PHYSICS↗

Issues and Strategies in Solving Multidisciplinary Optimization Problems

Optimization research at NASA Glenn Research Center has addressed the design of structures, aircraft and airbreathing propulsion engines. The accumulated multidisciplinary design activity is collected under a testbed entitled COMETBOARDS. Several issues were encountered during the solution of the problems. Four issues and the strategies adapted for their resolution are discussed. This is followed by a discussion on analytical methods that is limited to structural design application. An optimization process can lead to an inefficient local solution. This deficiency was encountered during design of an engine component. The limitation was overcome through an augmentation of animation into optimization. Optimum solutions obtained were infeasible for aircraft and airbreathing propulsion engine problems. Alleviation of this deficiency required a cascading of multiple algorithms. Profile optimization of a beam produced an irregular shape. Engineering intuition restored the regular shape for the beam. The solution obtained for a cylindrical shell by a subproblem strategy converged to a design that can be difficult to manufacture. Resolution of this issue remains a challenge. The issues and resolutions are illustrated through a set of problems: Design of an engine component, Synthesis of a subsonic aircraft, Operation optimization of a supersonic engine, Design of a wave-rotor-topping device, Profile optimization of a cantilever beam, and Design of a cylindrical shell. This chapter provides a cursory account of the issues. Cited references provide detailed discussion on the topics. Design of a structure can also be generated by traditional method and the stochastic design concept. Merits and limitations of the three methods (traditional method, optimization method and stochastic concept) are illustrated. In the traditional method, the constraints are manipulated to obtain the design and weight is back calculated. In design optimization, the weight of a structure becomes the merit function with constraints imposed on failure modes and an optimization algorithm is used to generate the solution. Stochastic design concept accounts for uncertainties in loads, material properties, and other parameters and solution is obtained by solving a design optimization problem for a specified reliability. Acceptable solutions can be produced by all the three methods. The variation in the weight calculated by the methods was found to be modest. Some variation was noticed in designs calculated by the methods. The variation may be attributed to structural indeterminacy. It is prudent to develop design by all three methods prior to its fabrication. The traditional design method can be improved when the simplified sensitivities of the behavior constraint is used. Such sensitivity can reduce design calculations and may have a potential to unify the traditional and optimization methods. Weight versus reliability traced out an inverted-S-shaped graph. The center of the graph corresponded to mean valued design. A heavy design with weight approaching infinity could be produced for a near-zero rate of failure. Weight can be reduced to a small value for a most failure-prone design. Probabilistic modeling of load and material properties remained a challenge.

Patnaik, Surya↗

Valence : A Massively Parallel Implementation of the Variational Subspace Valence Bond Method

This work describes the software package, Valence, for the calculation of molecular energies using the variational subspace valence bond (VSVB) method. VSVB is an ab initio electronic structure method based on nonorthogonal orbitals. Important features of practical value include high parallel scalability, wave functions that can be constructed automatically by combining orbitals from previous calculations, and ground and excited states that can be modeled with a single configuration or determinant. Here, the open-source software package includes tools to generate wave functions, a database of generic orbitals, example input files, and a library build intended for integration with other packages. We also present the interface to an external software package, enabling the computation of optimized molecular geometries and vibrational frequencies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the Use of Quartic Force Fields in Variational Calculations

The use of quartic force fields (QFFs) has been shown to be one of the most effective ways to efficiently compute vibrational frequencies for small molecules. In this paper we outline and discuss how the simple-internal or bond-length bond-angle (BLBA) coordinates can be transformed into Morse-cosine(-sine) coordinates which produce potential energy surfaces from QFFs that possess proper limiting behavior and can effectively describe the vibrational (or rovibrational) energy levels of an arbitrary molecular system. We investigate parameter scaling in the Morse coordinate, symmetry considerations, and examples of transformed QFFs making use of the MULTIMODE, TROVE, and VTET variational vibrational methods. Cases are referenced where variational computations coupled with transformed QFFs produce accuracies compared to experiment for fundamental frequencies on the order of 5 cm(exp −1) and often as good as 1 cm(exp −1).

quartic force field↗

Elastic scattering of low-energy electrons by nitromethane

In this work, we present integral, differential, and momentum transfer cross sections for elastic scattering of low-energy electrons by nitromethane, for energies up to 10 eV. We calculated the cross sections using the Schwinger multichannel method with pseudopotentials, in the static-exchange and in the static-exchange plus polarization approximations. The computed integral cross sections show a {pi}* shape resonance at 0.70 eV in the static-exchange-polarization approximation, which is in reasonable agreement with experimental data. We also found a {sigma}* shape resonance at 4.8 eV in the static-exchange-polarization approximation, which has not been previously characterized by the experiment. We also discuss how these resonances may play a role in the dissociation process of this molecule.

74 ATOMIC AND MOLECULAR PHYSICS↗

Resonantly Interacting Fermions in a Box

We use two fundamental theoretical frameworks to study the finite-size (shell) properties of the unitary gas in a periodic box: (1) an ab initio quantum Monte Carlo (QMC) calculation for boxes containing 4 to 130 particles provides a precise and complete characterization of the finite-size behavior, and (2) a new density functional theory (DFT) fully encapsulates these effects. The DFT predicts vanishing shell structure for systems comprising more than 50 particles, and allows us to extrapolate the QMC results to the thermodynamic limit, providing the tightest bound to date on the ground-state energy of the unitary gas: {xi}{sub S}{<=}0.383(1). We also apply the new functional to few-particle harmonically trapped systems, comparing with previous calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Application of Quantum Machine Learning to High Energy Physics Analysis at LHC Using Quantum Computer Simulators and Quantum Computer Hardware

Machine learning enjoys widespread success in High Energy Physics (HEP) analyses at LHC. However the ambitious HL-LHC program will require much more computing resources in the next two decades. Quantum computing may offer speed-up for HEP physics analyses at HL-LHC, and can be a new computational paradigm for big data analyses in High Energy Physics.We have successfully employed three methods (1) Variational Quantum Classifier (VQC) method, (2) Quantum Support Vector Machine Kernel (QSVM-kernel) method and (3) Quantum Neural Network (QNN) method for two LHC flagship analyses: ttH (Higgs production in association with two top quarks) and H->mumu (Higgs decay to two muons, the second generation fermions). We shall address the progressive improvements in performance from method (1) to method (3).We will present our experiences and results of a study on LHC High Energy Physics data analyses with IBM Quantum Simulator and Quantum Hardware (using IBM Qiskit framework), Google Quantum Simulator (using Google Cirq framework), and Amazon Quantum Simulator (using Amazon Braket cloud service). The work is in the context of a Qubit platform (a gate-model quantum computer). Taking into account the present limitation of hardware access, different quantum machine learning methods are studied on simulators and the results are compared with classical machine learning methods (BDT, classical Support Vector Machine and classical Neural Network). Furthermore, we do apply quantum machine learning on IBM quantum hardware to compare performance between quantum simulator and quantum hardware. The work is performed by an international and interdisciplinary collaboration with the Department of Physics and Department of Computer Sciences of University of Wisconsin, CERN Quantum Technology Initiative, IBM Research Zurich, IBM T.J. Watson Research Center, Fermilab Quantum Institute, BNL Computational Science Initiative, State University of New York at Stony Brook, and Quantum Computing and AI Research of Amazon Web Services. This work pioneers a close collaboration of academic institutions with industrial corporations in the High Energy Physics analyses effort. Though the size of event samples in future HL-LHC physics and the limited number of qubits pose some challenges to the Quantum Machine learning studies for High Energy Physics, more advanced quantum computers with larger number of qubits, reduced noise and improved running time (as envisioned by IBM and Google) may outperform classical machine learning in both classification power and in speed.Although the era of efficient quantum computing may still be years away, we have made promising progress and obtained preliminary results in applying quantum machine learning to High Energy Physics. A PROOF OF PRINCIPLE.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A modified iterative method for split problem of variational inclusions and fixed point problems

In this paper, we study a new split problem of variational inclusions and fixed point problems. With the help of averaged mappings, we introduce a new iterative method to solve the stated split problem. Strong convergence results are obtained under mild conditions. Also, we present some preliminary numerical examples to demonstrate the convergence and efficiency of our proposed algorithms.

97 MATHEMATICS AND COMPUTING↗

Localized basis functions and other computational improvements in variational nonorthogonal basis function methods for quantum mechanical scattering problems involving chemical reactions

The Generalized Newton Variational Principle for 3D quantum mechanical reactive scattering is briefly reviewed. Then three techniques are described which improve the efficiency of the computations. First, the fact that the Hamiltonian is Hermitian is used to reduce the number of integrals computed, and then the properties of localized basis functions are exploited in order to eliminate redundant work in the integral evaluation. A new type of localized basis function with desirable properties is suggested. It is shown how partitioned matrices can be used with localized basis functions to reduce the amount of work required to handle the complex boundary conditions. The new techniques do not introduce any approximations into the calculations, so they may be used to obtain converged solutions of the Schroedinger equation.

Schwenke, David W.↗

Solving the electron and electron-nuclear Schroedinger equations for the excited states of helium atom with the free iterative-complement-interaction method

Very accurate variational calculations with the free iterative-complement-interaction (ICI) method for solving the Schroedinger equation were performed for the 1sNs singlet and triplet excited states of helium atom up to N=24. This is the first extensive applications of the free ICI method to the calculations of excited states to very high levels. We performed the calculations with the fixed-nucleus Hamiltonian and moving-nucleus Hamiltonian. The latter case is the Schroedinger equation for the electron-nuclear Hamiltonian and includes the quantum effect of nuclear motion. This solution corresponds to the nonrelativistic limit and reproduced the experimental values up to five decimal figures. The small differences from the experimental values are not at all the theoretical errors but represent the physical effects that are not included in the present calculations, such as relativistic effect, quantum electrodynamic effect, and even the experimental errors. The present calculations constitute a small step toward the accurately predictive quantum chemistry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗