Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Track”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

The accuracy of laser tracking

A brief discussion of the actual laser tracking performance of geodetic satellites is followed by a discussion of the errors inherent in the laser system. An estimate is made of the capability expected within the next few years for the tracking of a heliocentric probe. The GEOS 1, GRARR, and GEOS 2 systems are considered. Errors in the tracking of a heliocentric probe are noted. These include errors due to the earth's atmosphere, (beam bending, atmospheric absorption, atmospheric turbulence, and atmospheric distortion of short laser pulses), and errors due to coronal effects.

Blamont, J. E.↗
NASA NTRS1972

A Markov chain technique for determining the acquisition behavior of a digital tracking loop

An iterative procedure is presented for determining the acquisition behavior of discrete or digital implementations of a tracking loop. The technique is based on the theory of Markov chains and provides the cumulative probability of acquisition in the loop as a function of time in the presence of noise and a given set of initial condition probabilities. A digital second-order tracking loop to be used in the Viking command receiver for continuous tracking of the command subcarrier phase was analyzed using this technique, and the results agree closely with experimental data.

Chadwick, H. D.↗
NASA NTRS1970

GEOS satellite tracking corrections for refraction in the ionosphere

The analytic formulations at different elevation angles and at a frequency of 2-GHz for the ionospheric refraction corrections used on the GEOS satellite tracking data are compared. The formulas and ray trace results for elevations greater than 10 deg, where most satellite tracking is done, differ in elevation, range, and range rate by less than 0.4 millidegrees (1.4 arc-seconds), 12 meters, and 12 cm/sec, respectively. In comparison to most operational requirements, this is insignificant. However, for the GEOS Observation Systems Intercomparison Investigation, these differences are equivalent in size to observed differences in system biases for some of the best electronic geodetic tracking systems and are probably contributing to the observed biases. The ray trace results and most of the more detailed analytic correction formulas show that the ionospheric refraction correction for range rate on an overhead pass is a maximum for elevation angles between 15 deg and 30 deg and falls off rapidly for both higher and lower elevation angles, contrary to the effect of the troposphere and to some reports in the literature.

Berbert, J. H.↗
NASA NTRS1969

Tracking system study

A digital computer program was generated which mathematically describes an optimal estimator-controller technique as applied to the control of antenna tracking systems used by NASA. Simulation studies utilizing this program were conducted using the IBM 360/91 computer. The basic ideas of applying optimal estimator-controller techniques to antenna tracking systems are discussed. A survey of existing tracking methods is given along with shortcomings and inherent errors. It is explained how these errors can be considerably reduced if optimal estimation and control are used. The modified programs generated in this project are described and the simulation results are summarized. The new algorithms for direct synthesis and stabilization of the systems including nonlinearities, are presented.

Dennis, A. R.↗
NASA NTRS1972

Satellite height determination using satellite-to-satellite tracking and ground laser systems

The height of the GEOS-C spacecraft was utilized as measured by the onboard radar altimeter, for an improved determination of the earth's gravitational field and for the determination of the variation of the physical surface of the oceans. Two tracking system approaches to accurately determine the spacecraft height (orbit) are described and their results stated. These are satellite-to-satellite tracking (SST) and ground laser tracking (GLT). Height variations can be observed in the dm-regions using SST and in the m-region using present GLT.

Vonbun, F. O.↗
NASA NTRS1972

Future techniques for tracking of synchronous satellites

A tracking system error analysis computer program is reported to study the feasibility of using range sum and range-rate sum measurements through a synchronous satellite to a user satellite, and range sum and range-rate sum measurements through a synchronous satellite to a ground based transponder for tracking of synchronous satellites. Error analysis transformed noise, bias, ground station location and orbit uncertainties into expected uncertainties in each of the orbits after tracking. Results show that both of the proposed measurement methods are feasible for determining and refining the orbits of future synchronous satellites.

Cooley, J. L.↗
NASA NTRS1972

Human operator dynamics for aural compensatory tracking

The human operator's ability to control using aural information only and using combined aural and visual displays was investigated for a simple tracking task. Tracking error was presented to the test subjects using one- and two-ear displays. For both displays the pitch of the tone represented the magnitude of the tracking error. The operator's aural control characteristics were modeled as a describing function plus a remnant. The effects on the measured describing function and remnant of different system dynamics, changes in the frequency content of the input and different displays were determined during the study. The describing function and remnant data indicate that humans can control as well with aural cues as with visual cues for the task considered. However, the reduction in operator time delays, expected because of the generally faster human response to aural stimuli, was not evident in the results. It was also determined that the operators could control equally well with either the one- or two-ear display.

Vinje, E. W.↗
NASA NTRS1972

Synchronization using pulsed edge tracking in optical PPM communication system

A pulse position modulated (PPM) optical communication system using narrow pulses of light for data transmission requires accurate time synchronization between transmitter and receiver. The presence of signal energy in the form of optical pulses suggests the use of a pulse edge tracking method of maintaining the necessary timing. The edge tracking operation in a binary PPM system is examined, taking into account the quantum nature of the optical transmissions. Consideration is given first to pure synchronization using a periodic pulsed intensity, then extended to the case where position modulation is present and auxiliary bit decisioning is needed to aid the tracking operation. Performance analysis is made in terms of timing error and its associated statistics. Timing error variances are shown as a function of system signal to noise ratio.

Gagliardi, R.↗
NASA NTRS1972

Satellite (IRLS) tracking of elk

The practicability of tracking free roaming animals in natural environments by satellite systems is reported. Satellite systems combine continuous tracking with simultaneous monitoring of physiological and environmental parameters through a combination of radio tracking and biotelemetric ground systems that lead to a better understanding of animal behavior and migration patterns.

Buechner, H. K.↗
NASA NTRS1972

Satellite height determination using satellite-to-satellite tracking and ground laser systems

An attempt was made to use GEOS-C spacecraft height, as measured by the onboard radar altimeter, for an improved determination of the earth's gravitational field and for the determination of the variation of the physical surface of the oceans. Two tracking system approaches to accurately determine the spacecraft height (orbit) are described and their results stated. These are satellite-to-satellite tracking (SST) and ground-laser tracking (GLT). Height variations can be observed in the dm-regions using SST and in the m-region using present GLT.

Vonbun, F. O.↗
NASA NTRS1972

An experiment to determine the relative positions of two collocated laser tracking stations

Two Goddard Space Flight Center laser tracking stations were collocated for a short time towards the end of 1971 for the purposes of comparing their tracking performance and quality. The lasers, only 25 meters apart, obtained simultaneous tracking data on eighteen passes of the Beacon Explorer C spacecraft. These data have now been used to determine the location of one laser with respect to the other with the result that the computed position of the second laser agrees with the surveyed position to 4 centimeters in latitude and height, and 1 centimeter in longitude.

Dunn, P. J.↗
NASA NTRS1971

An error analysis of the recovery capability of the relative sea-surface profile over the Puerto Rican trench from multi-station and ship tracking of GEOS-2

Error analyses were performed to examine the height error in a relative sea-surface profile as determined by a combination of land-based multistation C-band radars and optical lasers and one ship-based radar tracking the GEOS 2 satellite. It was shown that two relative profiles can be obtained: one using available south-to-north passes of the satellite and one using available north-to-south type passes. An analysis of multi-station tracking capability determined that only Antigua and Grand Turk radars are required to provide satisfactory orbits for south-to-north type satellite passes, while a combination of Merritt Island, Bermuda, and Wallops radars provide secondary orbits for north-to-south passes. Analysis of ship tracking capabilities shows that high elevation single pass range-only solutions are necessary to give only moderate sensitivity to systematic error effects.

Stanley, H. R.↗
NASA NTRS1973

Tracking and data system support for the Mariner Mars 1971 mission. Volume 3: Orbit insertion through end of primary mission

The Tracking and Data System (TDS) Support for the Mariner Mars 1971 Mission final report contains the deep space tracking and data acquisition activities in support of orbital operations. During this period a major NASA objective was accomplished: completion of the 180th revolution and 90th day of data gathering with the spacecraft about the planet Mars. Included are presentations of the TDS flight support pass chronology data for each of the Deep Space Stations used, and performance evaluation for the Deep Space Network Telemetry, Tracking, Command, and Monitor Systems. With the loss of Mariner 8 at launch, Mariner 9 assumed the mission plan of Mariner 8, which included the TV mapping cycles and a 12-hr orbital period. The mission plan was modified as a result of a severe dust storm on the surface of Mars, which delayed the start of the TV mapping cycles. Thus, the end of primary mission date was extended to complete the TV mapping cycles.

Barnum, P. W.↗
NASA NTRS1973

Mechanical erasure of particle tracks - A tool for lunar microstratigraphic chronology.

Mechanical erasure of particle tracks caused by impact deformation is shown to be a common feature of lunar soil grains. Etching of lunar pyroxenes reveals deformation markings that are evidence of prior impact events. The soil microstratigraphic chronology can be derived if it is assumed that the minimum track density in a thin soil layer is commonly found in grains where such erasure was caused by the impact that deposited the soil. With Apollo 12 core samples as examples, the minimum track density found in each layer is used to calculate the longest exposure that layer could have received since it was last disturbed. By summing the upper limits on the exposure times of the different layers, a lower limit on the average deposition rate was estimated to be 0.35 cm/m.y.

Fleischer, R. L.↗
NASA NTRS1974

Tracking system analytic calibration activities for the Mariner Mars 1971 mission

This report describes the functions of the Tracking System Analytic Calibration activity for Mariner Mars 1971 (MM'71), its objectives for this and future missions, and the support provided to the MM'71 Navigation Team during operations. The support functions encompass calibration of tracking data by estimating physical parameters whose uncertainties represent limitations to navigational accuracy, and detailed analysis of the tracking data to uncover and resolve any anomalies. Separate articles treat the activities and results of producing calibrations for the various error sources: Deep Space Station Locations, timing and polar motion, charged particles, and the troposphere. Two other articles are also included dis- - cussing the effects of the media error sources on orbit determination and the merits of the smoothing technique used for DRIVID.

Facilities↗
NASA NTRS1974

The tracking system analytic calibration activity for Mariner Mars 1971: Its function and scope

The functions of the Tracking System Analytic Calibration activity for Mariner Mars 1971 (MM'71), its objectives for this and future missions, and the support provided to the MM'71 Navigation Team during operations are described. Support functions encompass calibration of tracking data by estimating physical parameters whose uncertainties represent limitations to navigational accuracy, and detailed analysis of the tracking data to uncover and resolve any anomalies. Separate articles treat the activities and results of producing calibrations for the various error sources: Deep Space Station Locations, timing and polar motion, charged particles, and the troposphere. Two other articles are also included discussing the effects of the media error sources on orbit determination and the merits of the smoothing technique used for DRIVID.

Madrid, G. A.↗
NASA NTRS1974

Orbital and entry tracking accessory for globes

An orbital and entry tracking accessory or attachment is described which can be mounted on a globe to provide a rapid means of determining range requirements for entry vehicles returning from any orbit to any desired landing site with reasonable accuracy. The device is constructed of clear plastic strip material, and comprises a support ring, a calibrated orbital track member rigidly carried by the support ring, and a calibrated lateral range member pivotally coupled to the support ring at points such that the lateral range member is always oriented normally to the orbital track member. The assembly is mountable on the globe relatively snugly, but freely movable. At least one of the members has a detachable coupling which permits placement of the device on the globe.

Pritchard, E. B.↗
NASA NTRS1974

Adaptive compensation for an optical tracking telescope

The application of model referenced adaptive control theory to an optical tracking telescope is discussed. The capability of the adaptive technique to compensate for mount irregularities such as inertial variations and bearing friction is demonstrated via field test results on a large tracking telescope. Results are presented which show a 6 to 1 improvement in tracking accuracy for a worst-case satellite trajectory.

Gilbart, J. W.↗