Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Touch”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Crew systems and flight station concepts for a 1995 transport aircraft

Aircraft functional systems and crew systems were defined for a 1995 transport aircraft through a process of mission analysis, preliminary design, and evaluation in a soft mockup. This resulted in a revolutionary pilot's desk flight station design featuring an all-electric aircraft, fly-by-wire/light flight and thrust control systems, large electronic color head-down displays, head-up displays, touch panel controls for aircraft functional systems, voice command and response systems, and air traffic control systems projected for the 1990s. The conceptual aircraft, for which crew systems were designed, is a generic twin-engine wide-body, low-wing transport, capable of worldwide operation. The flight control system consists of conventional surfaces (some employed in unique ways) and new surfaces not used on current transports. The design will be incorporated into flight simulation facilities at NASA-Langley, NASA-Ames, and the Lockheed-Georgia Company. When interfaced with advanced air traffic control system models, the facilities will provide full-mission capability for researching issues affecting transport aircraft flight stations and crews of the 1990s.

Sexton, G. A.↗
NASA NTRS1984

Combining destination diversion decisions and critical in-flight event diagnosis in computer aided testing of pilots

Rockwell and Giffin (1982) and Giffin and Rockwell (1983) have discussed the use of computer aided testing (CAT) in the study of pilot response to critical in-flight events. The present investigation represents an extension of these earlier studies. In testing pilot responses to critical in-flight events, use is made of a Plato-touch CRT system operating on a menu based format. In connection with the typical diagnostic problem, the pilot was presented with symptoms within a flight scenario. In one problem, the pilot has four minutes for obtaining the information which is needed to make a diagnosis of the problem. In the reported research, the attempt has been made to combine both diagnosis and diversion scenario into a single computer aided test. Tests with nine subjects were conducted. The obtained results and their significance are discussed.

Rockwell, T. H.↗
NASA NTRS1984

Computer-aided testing of pilot response to critical in-flight events

This research on pilot response to critical in-flight events employs a unique methodology including an interactive computer-aided scenario-testing system. Navigation displays, instrument-panel displays, and assorted textual material are presented on a touch-sensitive CRT screen. Problem diagnosis scenarios, destination-diversion scenarios and combined destination/diagnostic tests are available. A complete time history of all data inquiries and responses is maintained. Sample results of diagnosis scenarios obtained from testing 38 licensed pilots are presented and discussed.

Giffin, W. C.↗
NASA NTRS1984

Overshooting cloud top, variation of tropopause and severe storm formation

The development of severe multicell thunderstorms leading to the touchdown of six tornados near Pampa, TX, on May 19-20, 1982, is characterized in detail on the basis of weather maps, rawinsonde data, and radar summaries, and the results are compared with GOES rapid-scan IR images. The multicell storm cloud is shown to have formed beginning at 1945 GMT at the point of highest horizontal moisture convergence and lowest tropopause height and to have penetrated the tropopause at 2130 GMT, reaching a maximum altitude and a cloud-top black-body temperature 9 C lower than the tropopause temperature at 2245 GMT and collapsing about 20 min, when the firt tornado touched down. The value of the real-time vertical profiles provided by satellite images in predicting which severe storms will produce tornados or other violent phenomena is stressed.

Hung, R. J.↗
NASA NTRS1986

Self-Alining Electrical Connector

Mating pair of insulators forces initial alinement of plug and socket. Male pins recessed behind one of alining insulators so they cannot touch female contacts alined. Contacts mate when coupling nut draws alined plug and socket together, depressing one of alining insulators against spring. Compressed spring provides tension on mated threads of assembly helping connector to resist loosening under vibration or shock. Arrangement prevents breakage or bending of male pins on conventional connectors when misalined contacts carelessly pressed together.

Swanic, A.↗
NASA NTRS1986

The crack problem in a reinforced cylindrical shell

In this paper a partially reinforced cylinder containing an axial through crack is considered. The reinforcement is assumed to be fully bonded to the main cylinder. The composite cylinder is thus modelled by a nonhomogeneous shell having a step change in the elastic properties at the z=0 plane, z being the axial coordinate. Using a Reissner type transverse shear theory the problem is reduced to a pair of singular integral equations. In the special case of a crack tip touching the bimaterial interface it is shown that the dominant parts of the kernels of the integral equations associated with both membrane loading and bending of the shell reduce to the generalized Cauchy kernel obtained for the corresponding plane stress case. The integral equations are solved and the stress intensity factors are given for various crack and shell dimensions. A bonded fiberglass reinforcement which may serve as a crack arrestor is used as an example.

Yahsi, O. S.↗
NASA NTRS1986

The crack problem in a reinforced cylindrical shell

A partially reinforced cylinder containing an axial through crack is considered. The reinforcement is assumed to be fully bonded to the main cylinder. The composite cylinder is thus modelled by a nonhomogeneous shell having a step change in the elastic properties at the z = 0 plane, z being the axial coordinate. Using a Reissner type transverse shear theory the problem is reduced to a pair of singular integral equations. In the special case of a crack tip touching the bimaterial interface it is shown that the dominant parts of the kernels of the integral equations associated with both membrane loading and bending of the shell reduce to the generalized Cauchy kernel obtained for the corresponding plane stress case. The integral equations are solved and the stress intensity factors are given for various crack and shell dimensions. A bonded fiberglass reinforcement which may serve as a crack arrestor is used as an example.

Yahsi, O. S.↗
NASA NTRS1986

Structural deformation of the Leoville chondrite

A petrofabric study of the Leoville chondrite was performed in order to gain an understanding of its deformation process. Strain values were determined from the chondrules' axial ratios or by the all-object-separation method, and the compaction required to deform Leoville chondrules was calculated from the decrease of radius in the circle-to-ellipse transformation. Structural and strain studies indicate the following order of events experienced by Leoville: (1) formation as an accretionary breccia, (2) compaction and development of foliation, (3) fracturing, possibly due to impact on earth, and (4) terrestrial weathering. Similarities between the axial ratios of chondrules (1.9-2.0) and of the whole meteorite (2.0) indicate either that Leoville deformed homogeneously or that it deformed as a framework of touching chondrules. This amount of strain corresponds to approximately 33 percent uniaxial shortening, assuming constant volume, and is likely to have been caused by compaction due to overburden from progressive accretion on the chondrite body. Diffusional flow is believed to be the mechanism by which olivines in these chondrules deformed.

Cain, P. M.↗
NASA NTRS1986

Support for global science - Remote sensing's challenge

Advances in remote sensing techniques are discussed. The benefits possible to remote sensing with the new Earth Observing System, which is composed of the Space Station and coorbiting and polar satellite platforms, are examined. Current changes in the remote sensing field, which involve a change from an industrial society to an informational society, force technology to high technology with high touch, short term to long term, centralized to decentralized, hierarchies to networks, and either/or to multiple option systems are studied. The explanatory and objective types of analyses for investigating biophysical, geochemical, and socioeconomic processes are described; the procedures include: morphometric, cause and effect, temporal and functional and ecological system analyses, inventory, mapping, monitoring, and modeling.

Estes, J. E.↗
NASA NTRS1987

Measuring Thicknesses of Wastewater Films

Sensor determines when thickness of film of electrically conductive wastewater on rotating evaporator drum exceeds preset value. Sensor simple electrical probe that makes contact with liquid surface. Made of materials resistant to chemicals in liquid. Mounted on shaft in rotating cylinder, liquid-thickness sensor extends toward cylinder wall so tip almost touches. Sensor body accommodates probe measuring temperature of evaporated water in cylinder.

Schubert, F. H.↗
NASA NTRS1986

On contact problems of elasticity theory

Certain contact problems are reviewed in the two-dimensional theory of elasticity when round bodies touch without friction along most of the boundary and, therefore, Herz' hypothesis on the smallness of the contact area cannot be used. Fundamental equations were derived coinciding externally with the equation in the theory of a finite-span wing with unkown parameter. These equations are solved using Multhopp's well-known technique, and numerical calculations are performed in specific examples.

Kalandiya, A. I.↗
NASA NTRS1986

An evaluation of the documented requirements of the SSP UIL and a review of commercial software packages for the development and testing of UIL prototypes

A review was conducted of software packages currently on the market which might be integrated with the interface language and aid in reaching the objectives of customization, standardization, transparency, reliability, maintainability, language substitutions, expandability, portability, and flexibility. Recommendations are given for best choices in hardware and software acquisition for inhouse testing of these possible integrations. Software acquisition in the line of tools to aid expert-system development and/or novice program development, artificial intelligent voice technology and touch screen or joystick or mouse utilization as well as networking were recommended. Other recommendations concerned using the language Ada for the user interface language shell because of its high level of standardization, structure, and ability to accept and execute programs written in other programming languages, its DOD ownership and control, and keeping the user interface language simple so that multiples of users will find the commercialization of space within their realm of possibility which is, after all, the purpose of the Space Station.

Gill, Esther Naomi↗
NASA NTRS1986

Technical issues in the conduct of large space platform experiments in plasma physics and geoplasma sciences

Large, permanently-manned space platforms can provide exciting opportunities for discoveries in basic plasma and geoplasma sciences. The potential for these discoveries will depend very critically on the properties of the platform, its subsystems, and their abilities to fulfill a spectrum of scientific requirements. With this in mind, the planning of space station research initiatives and the development of attendant platform engineering should allow for the identification of critical science and technology issues that must be clarified far in advance of space station program implementation. An attempt is made to contribute to that process, with a perspective that looks to the development of the space station as a permanently-manned Spaceborne Ionospheric Weather Station. The development of this concept requires a synergism of science and technology which leads to several critical design issues. To explore the identification of these issues, the development of the concept of an Ionospheric Weather Station will necessarily touch upon a number of diverse areas. These areas are discussed.

Szuszczewicz, Edward P.↗
NASA NTRS1986

Extremely rapid radio spikes in flares: A review

Radio spikes of a few to tens of milliseconds of the solar radio emission have recently seen a surge of interest of theoreticians who are fascinated by their high brightness temperature of up to 10 to the 15th power K, their association with hard X-ray bursts, and a possibly very intimate relation to electron acceleration. Their bandwidth and global distribution in frequency were quantitatively measured only recently. This review is intended to emphasize the considerable extend of old and new observational knowledge which is hardly touched upon by theory. The wide range of spike observations is summarized and brought into perspective of recent models. It is concluded that spikes yield a considerable potential for the diagnostics of energetic particles, their origin, and history in astrophysical plasmas.

Benz, A. O.↗
NASA NTRS1987

Collision detection for spacecraft proximity operations

Collision Detection for Spacecraft Proximity Operations This thesis describes the development of a new collision detection algorithm to be used when two spacecraft are operating in the same vicinity. The two spacecraft are modelled as unions of convex polyhedra, where the polyhedron resulting from the union may be either convex or nonconvex. The relative motion of the two spacecraft is assumed to be such that one vehicle is moving with constant linear and angular velocity with respect to the other. The algorithm determines if a collision is possible and, if so, predicts the time when the collision will take place. The theoretical basis for the new collision detection algorithm is the C-function formulation of the configuration space approach recently introduced by researchers in robotics. Three different types of C-functions are defined that model the contacts between the vertices, edges, and faces of the polyhedra representing the two spacecraft. These C-functions are used to formulate three "collision" conditions. The first of these conditions limits the points representing potential collisions to the zeros of the C-functions. The new algorithm is fundamentally a search for the smallest zero of any C-function that satisfies the second and third collision conditions. The C-functions are shown to be transcendental functions of time for the assumed trajectory of the moving spacecraft. The zeros of these functions cannot be expressed in dosed form. Therefore, numerical search procedures are developed to find aLl of the zeros of a C-function in specified bounded intervals of time. These bounded intervals of time are found by examining the second and third collision conditions. The capabilities of the new algorithm are demonstrated for several example cases. These include examples of collisions determined by zeros of each of the three different types of C-functions. In addition to predicting the time of first contact of the polyhedra, the algorithm identifies the features of the two polyhedra that are touching at this time. The new collision detection algorithm is the first such algorithm that is capable of solving the collision detection problem exactly for the case where the moving object has constant linear and angular velocities. This is a significant improvement on previous collision detection algorithms described in the literature. In particular, the ability to handle constant angular velocity represents a more realistic type of rotational motion than those which have been used in other algorithms.

Robin M Vaughan↗
NASA NTRS1987

The critical role of personality and organizational factors as determinants of reactions to restricted and stressful environments

Research into the impact of personality factors on groups in various settings is reviewed as an introduction to a brief discussion of personality and group behavior research needs relevant to the space program. Significant findings of some earlier research are summarized, and methodological problems are touched on. The study of intergroup and intragroup conflict in a stressful environment, as exemplified particularly by undersea habitats, is seen as being of consequence for long-term space missions. It is concluded that adequate research can only be conducted as an adjunct to data collection from operational stressful environments, and not from laboratory experiments.

Helmreich, Robert L.↗
NASA NTRS1988

Automatic Inspection During Machining

In experimental manufacturing process, numerically-controlled machine tool temporarily converts into inspection machine by installing electronic touch probes and specially-developed numerical-control software. Software drives probes in paths to and on newly machined parts and collects data on dimensions of parts.

Ransom, Clyde L.↗
NASA NTRS1987

Aircraft fire safety research

During the past 15 years, very significant progress has been made toward enhancing aircraft fire safety in both normal and hostile (combat) operational environments. Most of the major aspects of the aircraft fire safety problem are touched upon here. The technology of aircraft fire protection, although not directly applicable in all cases to spacecraft fire scenarios, nevertheless does provide a solid foundation to build upon. This is particularly true of the extensive research and testing pertaining to aircraft interior fire safety and to onboard inert gas generation systems, both of which are still active areas of investigation.

Botteri, Benito P.↗