Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TiP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Impact of Flow Configurations on Response Time and Data Quality in Real-Time, In-Line Fourier Transform Infrared (FTIR) Monitoring of Viscous Flows

The real-time, in-line monitoring of continuous flow concentrations is widely conducted via infrared (IR) spectrometry by using a flow cell connected to a reactive flow stream. For protective purposes, the IR sensor tip is typically offset from the flow. This offset can cause the formation of a stagnant boundary layer above the sensor, especially when dealing with high-viscosity fluids. As a result, the IR signal response time is often controlled by the slow diffusional exchange of fluid in the boundary layer, as confirmed via 2D computational fluid dynamics (CFD) simulations. We evaluated several flow configuration modifications in a typical IR flow cell in order to identify the changes to the flow dynamics that enable improved response times with minimal changes to the cell configuration: the use of (i) vertical flow, where the standard horizontal flow over the sensor is redirected to contact vertically with the sensor, (ii) a static mixer to create radial flow momentum above the IR sensor, and (iii) horizontal or vertical nozzles to direct the flow toward the IR sensor. The vertical flow configuration did not show any significant improvement over the standard horizontal flow configuration. However, the static mixer, horizontal nozzle, and vertical nozzle configurations all resulted in markedly improved response times and signal quality, albeit at the expense of a higher pressure drop across the flow cell. These results point toward straightforward, user-accessible modifications of in-line IR flow cells that result in significant improvements in signal stability and acquisition times.

42 ENGINEERING↗
DOE OSTI2021

Atomic-Scale Investigation of Oxidation at the Black Phosphorus Surface

Black phosphorus (BP) exhibits extraordinary electronic properties that are desirable for a wide variety of electronic and optoelectronic applications. However, applications of BP are hindered by its rapid degradation in ambient conditions. Despite significant advances that have been made in understanding the degradation mechanism, no consensus has yet been reached on how BP oxidation occurs at the atomic scale as experimental studies have been mostly restricted to averaged effects of degradation over a micron- to millimeter-sized region. Here, BP oxidation is investigated using scanning tunneling microscopy/spectroscopy (STM/S). Introducing O 2 gas to the BP surface in ultrahigh vacuum at a pressure of 10 –5 mbar for 1 min creates two new types of defects on the surface. We identify these defects as dangling atomic oxygen and phosphorus multivacancies using density functional theory simulations. In addition to the structural changes to the surface, the electronic structure is also drastically altered by the introduction of oxygen. The 300 meV band gap of BP is lifted due to dosing. This change in the electronic structure is reversible through STM tip manipulation. As a result, these are the first experimental results showing the atomic-scale oxidation of BP, an important step toward understanding the degradation process

2D materials↗
DOE OSTI2023

Visualizing Overall Water Splitting on Single Microcrystals of Phosphorus-Doped BiVO 4 by Photo-SECM

Particulate bismuth vanadate (BiVO4) has attracted considerable interest as a promising photo(electro)catalyst for visible-light-driven water oxidation, however, overall water splitting (OWS) has been difficult to attain because its conduction band is too positive for efficient hydrogen evolution. Using photo-scanning electrochemical microscopy (photo-SECM) with a chemically modified nanotip, we visualized for the first time the OWS at a single truncated bipyramidal microcrystal of phosphorus-doped BiVO 4 . The tip simultaneously served as a light guide to illuminate the photocatalyst and as an electrochemical nanoprobe to observe and quantitatively measure local oxygen and hydrogen fluxes. The obtained current patterns for both O 2 and H 2 agree well with the accumulation of photogenerated holes and electrons on {010} basal and {110} lateral facets, respectively. Furthermore, the developed experimental approach is an important step towards nanoelectrochemical mapping of the activity of photocatalyst particles at the sub-facet level.

bismuth vanadate↗
DOE OSTI2021

Controlling the Aspect Ratios of Au Nanocrystals with Ag+ Addition Time in Seed-Mediated Synthesis: Implications for Surface-Enhanced Raman Scattering

Among various factors playing pivotal roles in the typical seed-mediated growth of Au nanocrystals (NCs), the role of Ag (AgNO3) has remained debatable over time and seminal research efforts have helped us in reaching a consensus, albeit from the standpoint of [Ag+] concentration. This study aims to provide an understanding of the role of Ag+ from the perspective of time. Here, we show that different Au NCs with tunable aspect ratios (ARs) can be generated in one system in high yield simply by varying the time of addition of Ag+ in the growth solution. The generality of the method has been demonstrated in tuning the ARs of anisotropic Au NCs like concave cuboid (CCB, AR = 2) and elongated tetrahexahedra (AR = 2.5), where the delayed addition of Ag+ leads to the formation of their isotropic counterpart concave cube (CC, AR = 1) and tetrahexahedra (AR = 1), respectively. This work, apart from establishing timed addition of Ag+ as a crucial parameter in controlling the AR, may also help in the realization of a universal growth mechanism of Au NCs. The Au NCs with varying ARs (CCB, AR = 2 and CC, AR = 1) have been further explored as potential substrates for surface-enhanced Raman scattering (SERS) due to the presence of their high-index facets and sharp tips.

KEYWORDS:Au nanoparticles seed-mediated growth hig↗
DOE OSTI2025

Facet-Dependent Hydrogen Evolution Reaction on M 2 P (M = Ni, Co, Fe) Single Crystals

Transition-metal phosphides (MPs) are promising earth-abundant catalysts for hydrogen evolution reactions (HERs) due to their remarkable activity and stability. To further improve their properties, facet control is a key strategy. The growth of shape-selected nanoparticles may substantially enhance electrocatalytic activity, but this approach requires fundamental studies of facet-specific catalytic properties. There are only a few reports on the facet effects of MPs, which leads to a limited understanding of the activity of each facet and hampers catalyst design. Here, in this study, we grew large hexagonal-prism-shaped single crystals of three representative M 2 P (M = Ni, Co, and Fe) catalysts using metal flux routes. Two facets of M 2 P single crystals were tested to study facet-dependent HER activities, and it was consistently demonstrated that for all M 2 P crystals, a tip facet [(0001) for Ni 2 P/Fe 2 P and (010) for Co 2 P] had a higher activity than the side facet [(101̅0) for Ni 2 P/Fe 2 P and (100) for Co 2 P]. HER activity between the same facet elucidated the activity ordered between different transition metals as Fe 2 P > Co 2 P > Ni 2 P under low-potential regions. At high applied potentials, this trend is reversed due to the differences in Tafel slopes, with Ni 2 P becoming the most active catalyst, such that the activity of the (0001) facet of Ni 2 P approaches that of Pt. The calculated surface density of states (DOS) of each facet and its local curvature were found to be a useful descriptor for the activity trends among different transition metals of the same facets.

Co2P↗
DOE OSTI2026

Group-Additivity–Embedded Multiscale Modeling for Electric Field-Enhanced Nanocatalysis

Elucidating structure-performance relationships remains a central challenge in field-enhanced catalysis, where nanoparticles exhibit nonuniform surface sites with site-dependent responses to electric fields. Low-coordination sites (edges, corners, and tips) are particularly electric field-sensitive (EF), leading to nonuniform charge distribution, adsorption energies, and catalytic activity. Here, using ammonia decomposition on a ruthenium cluster as a model system, we develop a transferable multiscale framework integrating density functional theory, group additivity (GA), Brønsted-Evans-Polanyi scaling, and microkinetic modeling to predict EF-dependent activity across nonuniform cluster sites. Across sites and fields, the nitrogen adsorption energy (E N ) emerges as the governing descriptor, yielding robust volcano relationships whose optimum shifts systematically with field: negative fields strengthen N binding via electron accumulation, while positive fields weaken N binding via charge depletion, moving the optimal E N toward weaker binding. Microkinetic analysis shows that N≡N bond formation remains the key kinetic bottleneck over most conditions; positive fields lower the effective barrier and, critically, increase the fraction of near-optimal active sites, leading to a net enhancement in overall activity relative to zero-field and negative-field cases. By capturing EF- and site-dependent energetics with high accuracy and low computational cost, this GA-embedded multi-scale simulation workflow provides a physically interpretable route to predict and design field-enhanced nanocatalysis.

ammonia decomposition↗
DOE OSTI2020

Si Microwire-Array Photocathodes Decorated with Cu Allow CO 2 Reduction with Minimal Parasitic Absorption of Sunlight

High loadings of Cu were integrated on the light-facing side of Si microwire arrays used under simulated sunlight for the photoelectrochemical reduction of CO 2 (aq) to hydrocarbons in 0.10 M KHCO 3 (aq). Radial-junction n + p-Si microwire arrays decorated with Cu exhibited absolute photocurrent densities comparable to an uncovered Si surface. Moreover, with respect to a Cu foil electrode, the positive shift in the onset potential for hydrocarbon formation at n + p-Si/Cu microwire arrays was equal to or greater than the photovoltage of the semiconductor alone. Selective electrodeposition of Cu on the tips and sidewalls of Si microwires was responsible for the minimal parasitic reflection and absorption exhibited by the catalyst, such that light-limited, absolute current densities >25 mA·cm –2 were sustained for 48 h under simulated sunlight. Photoelectrodes prepared from semiconductors with low diode quality factors and electrocatalysts with large Tafel slopes are shown to benefit from increased microstructured surface area. Si microwire arrays are thus suitable for photoelectrochemical reactions requiring high loadings of metallic and reflective electrocatalysts.

25 ENERGY STORAGE↗
DOE OSTI2020

Electrochemical Healing of Dendrites in Garnet-Based Solid Electrolytes

Garnet oxides are a promising material family for solid-state batteries (SSBs). Dendrite formation in solid electrolytes critically limits the applicability of SSBs because of limiting Coulombic efficiency and power capability. In this study, the authors report operando electrochemical healing of dendrites in a garnet-based solid electrolyte (SE). Dendrites were deliberately formed at high operational current density (2 mA cm –2 ) beyond the critical current density (0.55 mA cm –2 ) of the used garnet SE. Electrochemical impedance spectroscopy and scanning electron microscopy were used to confirm dendrite growth in the SE. Dendrites were subsequently healed electrochemically via plating and stripping at 20 and 1 μA cm –2 current densities. Removal of dendrites was shown by an increase in bulk and interfacial resistance and a progressive increase in polarization during galvanostatic plating and stripping. High local current density at the dendrite tips was identified as the mechanism for preferentially removing dendrites electrochemically. The dendrite detection and healing methods discussed here are crucial for extending the life of SSBs.

25 ENERGY STORAGE↗
DOE OSTI2020

Active Plasmonics and Active Chiral Plasmonics through Orientation-Dependent Multipolar Interactions

While most active plasmonic efforts focus on responsive metamaterials to modulate optical response, we present a simple alternative based on applied orientation control that can likely be implemented for many passive plasmonic materials. Passive plasmonic motifs are simpler to prepare but cannot be altered postfabrication. Here, we show that such systems can be easily manipulated through substrate orientation control to generate both active plasmonic and active chiral plasmonic responses. Using gold nanocrescents as our model platform, we demonstrate tuning of optical extinction from -21% to +36% at oblique incidence relative to normal incidence. Variation of substrate orientation in relation to incident polarization is also demonstrated to controllably switch chiroptical handedness (e.g., Δg = ± 0.55). These active plasmonic responses arise from the multipolar character of resonant modes. In particular, we correlate magnetoelectric and dipole–quadrupole polarizabilities with different light-matter orientation-dependence in both near- and far-field localized surface plasmon activity. Additionally, the attribution of far-field optical response to higher-order multipoles highlights the sensitivity offered by these orientation-dependent characterization techniques to probe the influence of localized electromagnetic field gradients on a plasmonic response. The sensitivity afforded by orientation-dependent optical characterization is further observed by the manifestation in both plasmon and chiral plasmon responses of unpredicted structural nanocrescent variance (e.g., left- and right-tip asymmetry) not physically resolved through topographical imaging.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Durian-Inspired Design of Bismuth–Antimony Alloy Arrays for Robust Sodium Storage

Sodium-ion batteries have attracted widespread attention for cost-effective and large-scale electric energy storage. However, their practical deployment has been largely retarded by the lack of choice of efficient anode materials featuring large capacity and electrochemical stability and robustness. Herein, we report a durian-inspired design and template-free fabrication of a robust sodium anode based on triangular pyramid arrays of Bi 0.75 Sb 0.25 alloy electrodeposited on Cu substrates. The Bi 0.75 Sb 0.25 arrays exhibit an appreciable electrochemical robustness for sodium storage, sustaining a reversible capability 335 mAh g –1 at a high rate of 2.5 A g –1 and 87% of the initial capacity over 2000 cycles. We further demonstrate the applicability of the Bi 0.75 Sb 0.25 array anode in sodium full cells by pairing it with a Na 3 V 2 (PO 4 ) 3 /C cathode. This full cell achieves a high specific energy of 203 Wh kg –1 (based on both active electrodes). Such an enhanced performance is attributed to the thorny-durian-like architecture and bimetallic alloy composition. In conclusion, the pyramid tip induces ion enrichment for rapid charge-transfer reaction, while the alloy design reduces the electrode volume swelling for stable Na cycling.

25 ENERGY STORAGE↗
DOE OSTI2022

Imaging Phase Segregation in Nanoscale Li x CoO 2 Single Particles

Li x CoO 2 (LCO) is a common battery cathode material that has recently emerged as a promising material for other applications including electrocatalysis and as electrochemical random access memory (ECRAM). During charge– discharge cycling LCO exhibits phase transformations that are significantly complicated by electron correlation. While the bulk phase diagram for an ensemble of battery particles has been studied extensively, it remains unclear how these phases scale to nanometer dimensions and the effects of strain and diffusional anisotropy at the single-particle scale. Understanding these effects is critical to modeling battery performance and for predicting the scalability and performance of electrocatalysts and ECRAM. Here we investigate isolated, epitaxial LiCoO 2 islands grown by pulsed laser deposition. After electrochemical cycling of the islands, conductive atomic force microscopy (c-AFM) is used to image the spatial distribution of conductive and insulating phases. Above 20 nm island thicknesses, we observe a kinetically arrested state in which the phase boundary is perpendicular to the Li-planes; we propose a model and present image analysis results that show smaller LCO islands have a higher conductive fraction than larger area islands, and the overall conductive fraction is consistent with the lithiation state. Thinner islands (14 nm), with a larger surface to volume ratio, are found to exhibit a striping pattern, which suggests surface energy can dominate below a critical dimension. When increasing force is applied through the AFM tip to strain the LCO islands, significant shifts in current flow are observed, and underlying mechanisms for this behavior are discussed. The c-AFM images are compared with photoemission electron microscopy images, which are used to acquire statistics across hundreds of particles. Finally, the results indicate that strain and morphology become more critical to electrochemical performance as particles approach nanometer dimensions.

25 ENERGY STORAGE↗
DOE OSTI2023

Avoided Level Crossing and Entangled States of Interacting Hydrogen Molecules Detected by the Quantum Superposition Microscope

Pump–probe measurements by ultrashort THz pulses can be used to excite and follow the coherence dynamics in the time domain of single hydrogen molecules (H 2 ) in the junction of a scanning tunneling microscope (STM). By tailoring the resonance frequency through the sample bias, we identified two spectral signatures of the interactions among multiple H 2 molecules. First, the avoided level crossing featured by energy gaps ranging from 20 to 80 GHz was observed because of the level repulsion between two H 2 molecules. Second, the tip can sense the signal of H 2 outside the junction through the projective measurement on the H 2 inside the junction, owing to the entangled states created through the interactions. A dipolar-type interaction was integrated into the tunneling two-level system model of H 2 , enabling accurate reproduction of the observed behaviors. Furthermore, our results obtained by the quantum superposition microscope reveal the intricate quantum mechanical interplay among H 2 molecules and additionally provide a 2D platform to investigate unresolved questions of amorphous materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Tunable Localized Charge Transfer Excitons in Nanoplatelet–2D Chalcogenide van der Waals Heterostructures

Observation of interlayer, charge transfer (CT) excitons in van der Waals heterostructures (vdWHs) based on 2D–2D systems has been well investigated. While conceptually interesting, these charge transfer excitons are highly delocalized and spatially localizing them requires twisting layers at very specific angles. This issue of localizing the CT excitons can be overcome via making nanoplate–2D material heterostructures (N2DHs) where one of the components is a spatially quantum confined medium. Here, we demonstrate the formation of CT excitons in a mixed dimensional system comprising MoSe 2 and WSe 2 monolayers and CdSe/CdS-based core/shell nanoplates (NPLs). Spectral signatures of CT excitons in our N2DHs were resolved locally at the 2D/single-NPL heterointerface using tip-enhanced photoluminescence (TEPL) at room temperature. By varying both the 2D material and the shell thickness of the NPLs and applying an out-of-plane electric field, the exciton resonance energy was tuned by up to 100 meV. Finally, our finding is a significant step toward the realization of highly tunable N2DH-based next-generation photonic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Autonomous Multistate Nanoencoding Using Combinatorial Ferroelectric Closure Domains in BiFeO 3

Recent advances in ferroic materials have identified topological defects as promising candidates for enabling additional functionalities in future electronic systems. The generation of stable and customizable polar topologies is needed to achieve multistates that enable beyond-binary device architectures. Here, in this study, we show how to autonomously pattern on-demand highly tunable striped closure domains in pristine rhombohedral-phase BiFeO 3 thin films through precise scanning of a biased atomic force microscopy tip along carefully designed paths. By employing this strategy, we generate and manipulate closed-loop structures with high spatial resolution in an automated manner, allowing the creation of highly tunable and intricate topological domain structures that exhibit distinct polarization configurations without the need for electrode deposition or complex heterostructure growth. As a proof-of-concept for ferroelectric beyond-binary memory devices, we use such topological domains as multistates, engineering an alphabet and automating the symbolic writing/reading process using autonomous microscopy. The resulting information density is compared with that of current commercially available memory devices, demonstrating the potential of ferroelectric topological domains for multistate information storage applications.

BiFeO3↗
DOE OSTI2026

Plasmonic Hybridization and Near-Field Localization in Gold “Dog Bone” Nanoparticles

Gold nanoparticles with complex anisotropic geometries offer unique opportunities for tailoring plasmonic near-fields beyond the limits of conventional nanorods. Here we combine photon-induced near-field electron microscopy (PINEM) and full-wave simulations to resolve plasmon hybridization and near-field localization in gold dog-bone nanoparticles and their dimers with and without conformal SiO 2 shells. We demonstrate that the dog-bone geometry drives unconventional polarization-dependent field confinement, including pronounced tip-localized near-fields under both longitudinal and transverse excitation. Conformal SiO 2 shells red-shift the plasmon resonances through dielectric screening and prevent charge-transfer coupling in adjacent dimers. Depending on the dimer orientation and excitation polarization, coupled structures exhibit distinct bonding- and antibonding-like hybridized modes as well as interparticle near-field channels. However, weakly interacting dimers retain largely independent particle responses with geometry-governed asymmetries. The close agreement between PINEM measurements and simulations establishes a direct picture of how shape, dielectric environment, and nanoscale coupling together define plasmonic modes in complex anisotropic nanoparticles. These findings provide design principles for engineering localized optical fields in plasmonic nanoscale structures.

hybridization↗
DOE OSTI2024

Ultrafast and Highly Collimated Radially Polarized Photons at Room Temperature from a Colloidal Quantum Dot Coupled to a Hybrid Nanoantenna

To harness the potential of radially polarized photons for classical and quantum communication applications, we demonstrate an on-chip, room-temperature device, which generates highly directional radially polarized photons at very high rates. The photons are emitted from a giant CdSe/CdS colloidal quantum dot (gQD) accurately positioned at the tip of a metal nanocone centered inside a hybrid metal-dielectric bullseye antenna. We show that due to the large and selective Purcell enhancement specifically for the out-of-plane optical dipole of the gQD, the emitted photons can have a very high degree of radial polarization (>93%), based on a quantitative metric. Our study emphasizes the importance of accurate gQD positioning for optimal radial polarization purity through extensive experiments and simulations, which contribute to the fundamental understanding of radial polarization in nanostructured devices and pave the way for implementation of such systems in practical applications using structured quantum light.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Imaging from Macro to Nanoscale: Multimodal Advances in Chemical and Biomedical Imaging

Imaging increasingly serves as a multiscale framework for linking molecular mechanisms to cellular behavior, tissue architecture, and organ phenotypes in biology and unraveling fundamental processes in chemistry, physics and materials science. This Perspective highlights recent advances in chemical and biomedical imaging across macro-, micro-, and nanoscales, using representative examples published in Chemical and Biomedical Imaging (CBMI). At the macroscale, we discuss chemically selective MRI, including endogenous and exogenous CEST strategies, together with photoacoustic imaging as a hybrid modality with functional and chemical contrast. At the microscale, we consider fluorescence, label-free optical and vibrational imaging, and selected X-ray approaches that expand sensitivity, specificity, and temporal resolution in biological and materials systems. At the nanoscale, we highlight super-resolution fluorescence microscopy, single-molecule methods, tip-enhanced Raman spectroscopy, and correlative imaging strategies that resolve local heterogeneity and molecular organization. Across scales, a common theme emerges that advances in probes, contrast mechanisms, instrumentation, and sample handling are enabling chemically informed imaging that connects molecular specificity with biological context.

multiscale imaging↗
DOE OSTI2022

Pt Particle Size Affects Both the Charge Separation and Water Reduction Efficiencies of CdS–Pt Nanorod Photocatalysts for Light Driven H 2 Generation

Decreasing the metal catalyst size into nanoclusters or even single atom is an emerging direction of developing more efficient and cost-effective photocatalytic systems. Because the catalyst particle size affects both the catalyst activity and light driven charge separation efficiency, their effects on the overall photocatalytic efficiency are still poorly understood. Herein, using a well-defined semiconductor–metal heterostructure with Pt nanoparticle catalysts selectively grown on the apexes of CdS nanorods (NRs), we study the effect of the Pt catalyst size on light driven H 2 generation quantum efficiency (QE H 2 ). With the increase of the Pt catalyst size from 0.7 ± 0.3 to 3.0 ± 0.8 nm, the QEH 2 of CdS–Pt increases from 0.5 ± 0.2% to 38.3 ± 5.1%, by nearly 2 orders of magnitude. Transient absorption spectroscopy measurement reveals that the electron transfer rate from the CdS NR to the Pt tip increases with the Pt diameter following a scaling law of d 5.6 , giving rise to the increase of electron transfer efficiency at larger Pt sizes. Additionally, the observed trend can be understood by a simplified kinetic model that assumes the overall efficiency is the product of the quantum efficiencies of charge separation (including hole transfer, electron transfer, and hole scavenging) and water reduction steps, and for CdS–Pt NRs, the quantum efficiencies of electron transfer and water reduction steps increase with the Pt sizes. Our findings suggest the importance of improving the quantum efficiencies of both charge separation and catalysis in designing efficient semiconductor–metal hybrid photocatalysts, especially in the regime of small metal particle sizes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗