Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THERMONUCLEAR DEVICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Advanced tokamak research with integrated modeling in JT-60 Upgrade

Researches on advanced tokamak (AT) have progressed with integrated modeling in JT-60 Upgrade [N. Oyama et al., Nucl. Fusion 49, 104007 (2009)]. Based on JT-60U experimental analyses and first principle simulations, new models were developed and integrated into core, rotation, edge/pedestal, and scrape-off-layer (SOL)/divertor codes. The integrated models clarified complex and autonomous features in AT. An integrated core model was implemented to take account of an anomalous radial transport of alpha particles caused by Alfven eigenmodes. It showed the reduction in the fusion gain by the anomalous radial transport and further escape of alpha particles. Integrated rotation model showed mechanisms of rotation driven by the magnetic-field-ripple loss of fast ions and the charge separation due to fast-ion drift. An inward pinch model of high-Z impurity due to the atomic process was developed and indicated that the pinch velocity increases with the toroidal rotation. Integrated edge/pedestal model clarified causes of collisionality dependence of energy loss due to the edge localized mode and the enhancement of energy loss by steepening a core pressure gradient just inside the pedestal top. An ideal magnetohydrodynamics stability code was developed to take account of toroidal rotation and clarified a destabilizing effect of rotation on the pedestal. Integrated SOL/divertor model clarified a mechanism of X-point multifaceted asymmetric radiation from edge. A model of the SOL flow driven by core particle orbits which partially enter the SOL was developed by introducing the ion-orbit-induced flow to fluid equations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Convective Transport Suppression in the Scrape-Off Layer Using Ion Cyclotron Resonance Heating on the ASDEX Upgrade Tokamak

Turbulence properties in the scrape-off layer (SOL) in the presence of ion cyclotron frequency heating (ICRH) are compared to instances where it is absent. The discharges are all in a high-confinement mode (H-mode) regime. During ICRH, the SOL plasma density increases whereas turbulence large-scale and convective structures are shown to be suppressed. The probability distribution function is thus recorded to be closer to a Gaussian, and a net decrease in the low-frequency density fluctuations is reflected in the power spectra. Consequently, the level of turbulent fluctuations decreases significantly. Turbulence suppression is also reported during edge localized modes (ELMs) where both the ELMs-induced transport and duration are strongly affected. The increase of neutrals by gas puffing did not alter this behavior. We deduce that ICRH can be used as to suppress convective transport and reduce the ELM's amplitude.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Probing plasma turbulence by modulating the electron temperature gradient

The local value of a/L{sub Te}, a turbulence drive term, was modulated with electron cyclotron heating in L-mode discharges on DIII-D [J. L. Luxon, Nucl. Fusion 42, 614 (2002)] and the density and electron temperature fluctuations in low, intermediate, and high-k regimes were measured and compared with nonlinear gyrokinetic turbulence simulations using the GYRO code [J. Candy and R. E. Waltz, J. Comput. Phys. 186, 545 (2003)]. The local drive term at rhoapprox0.6 was reduced by up to 50%, which produced comparable reductions in electron temperature fluctuations at low-k. At intermediate k, k{sub t}hetaapprox4 cm{sup -1} and k{sub t}hetarho{sub s}approx0.8, a very interesting and unexpected result was observed where density fluctuations increased by up to 10% when the local drive term was decreased by 50%. Initial comparisons of simulations from GYRO with the thermal diffusivity from power balance analysis and measured turbulence response are reported. Simulations for the case with the lowest drive term are challenging as they are near the marginal value of a/L{sub Te} for trapped electron mode activity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulation And Design Of A Reflection Magnet For The EAST Neutral Beam System

The simulation and design of a reflection magnet to be installed in the Experimental Advanced Superconducting Tokamak (EAST) neutral beam injection system are reported. A parametric design and simulation for the reflection magnet was carried out. For a deuterium beam with 42 cm as the bending radius, the intensity of reflection magnet field is about 1376 Gs at the energy of 80 keV. In order to determine position of the ion dump and the surface power load, a particle simulation with Monte Carlo was developed to study ion trajectories. In addition, the louver design is introduced.

43 PARTICLE ACCELERATORS↗

Contributions of Electron Cyclotron Waves to Performance in Advanced Regimes on DIII-D

High-power electron cyclotron (EC) waves are used to increase performance in several Advanced Tokamak (AT) regimes on DIII-D where there is a simultaneous need for high noninductive current and high beta. In the Quiescent High-confinement mode (QH-mode), a direct measurement of the electron cyclotron current drive (ECCD) profile is made using modulation techniques, and a trapped electron mode (TEM) dominated regime with core T{sub e}>T{sub i} is created. In the 'highq{sub min}' AT scenario, ECCD provides part of the off-axis noninductive current and helps to produce a tearing stable equilibrium. In the hybrid regime, strong central current drive from EC waves and other sources increases the noninductive current fraction to {approx_equal}100%. Surprisingly, the core safety factor remains above unity, meaning good alignment between the current drive profile and the desired plasma current profile is not necessary in this scenario.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NON-LINEAR VISCO-RESISTIVE COLLISIONAL TRANSPORT IN TOROIDAL ELLIPTICAL PLASMAS WITH TRIANGULARITY AND HOLE CURRENTS: A REVIEW

Non-linear plasma diffusion effects due to hole currents in tokamaks is analyzed in this work. Since the recent discovery of hole currents in tokamaks, this matter has become very important in confinement and instabilities in tokamaks plasmas. The analysis here presented includes non-linear flows as well as hole currents. In the case of low vorticity plasmas our treatment is performed using MHD equations, an it is more suitable for plasmas with very low levels of turbulence, as in the H-mode. The present treatment follows the lines of previous works, and some of the equations and results look like those obtained on these papers. However, the form of the family of the magnetic surfaces is very different to previous treatment, since the hole current modifies those families in a very important way. Elliptic plasmas with triangularity are considered. Pfirsch-Schlueter type currents are obtained for these generalized cases. Diffusion with and without holes are calculated and compared for several values of ellipticity and triangularity. Negative and positive triangularities are considered. In most of the calculations triangularity improves confinement, but the results are different for the positive than for the negative case.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Low-Z Shell Pellet Experiments on DIII-D

Small (o.d. = 1.8 mm, t = 0.37 mm) polystyrene shells filled with either pressurized argon gas or boron powder have been fired into DIII-D plasmas for disruption mitigation experiments. The pellet shells were observed to burn up at rhoapprox =0.5, roughly consistent with ablation rate calculations. Pellet slowing from 350 m/s down to 100 m/s was observed, which is not well-understood at present. Negligible plasma current contraction or MHD onset were seen as a result of the shell burn-up in the plasma edge, consistent with calculations. The pellet payloads were observed to ionize rapidly in the pellet vicinity (<1 cm radius) and rapid (<15 ms) mixing through the plasma core was observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Composition And Electrical Properties Of Dust From Tokamak Compass

In spite of the fact that fusion is a subject of the study for many years, there are still a lot of open questions. One of the interesting topics in fusion research is a presence of dust grains in reactors. In the paper, dust grains born in tokamak Compass are studied and compared with samples of a spherical geometry and well known composition. A unique experimental setup was used for investigations of charging properties of such grains and the SEM and EDX spectroscopy was applied for a study of grain composition. We focus on the secondary emission because this process plays a prominent role when a portion of energetic electrons is present in surroundings of a particular grain. It was shown that depending on the grain size and material, energetic electrons charge the grains to positive potentials comparable with the energy of impinging electrons.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Problem of RF Gradient Limits

We describe breakdown in rf accelerator cavities in terms of a number of mechanisms. We divide the breakdown process into three stages: 1) we model surface failure using molecular dynamics of fracture caused by electrostatic tensile stress, 2) the ionization and plasma growth is modeled using a particle in cell code, 3) we model surface damage by assuming unipolar arcing. Although unipolar arcs are strictly defined with equipotential boundaries, we find that the cold, dense plasma in contact with the surface produces very small Debye lengths and very high electric fields over a large area, and these high fields produce strong erosion mechanisms, primarily self sputtering, compatible with crater formation. We compare this model with arcs in tokamaks, plasma ablation, electron beam welding, micrometeorite impacts, and other examples.

43 PARTICLE ACCELERATORS↗

Parametric upconversion of lower hybrid wave by runaway electrons in tokamak

A kinetic formalism of parametric decay of a large amplitude lower hybrid pump wave into runaway electron mode and an upper sideband mode is investigated. The pump and the sideband exert a ponderomotive force on runaway electrons, driving the runaway mode. The density perturbation associated with the latter beats with the oscillatory velocity due to the pump to produce the sideband. The finite parallel velocity spread of the runaway electrons turns the parametric instability into a stimulated Compton scattering process where growth rate scales as the square of the pump amplitude. The large phase velocity waves thus generated can potentially generate relativistic electrons.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Results on the Spin Structure of the Nucleon from COMPASS

Highlights of the nucleon spin studies from the COMPASS experiment at CERN are presented. Three independent measurements of the gluon polarization give values compatible with zero for x close to 0.1. The quark helicity distributions are determined for all flavors. On the transversity side, Collins and Sivers asymmetries are measured for proton and deuteron targets. Plans for COMPASS-II include DVCS as well as polarized Drell-Yan measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Plasma Physics found in JT-60 Tokamak over the Last 20 years

This paper summarizes major plasma physics obtained during the period of JT-60 operation for 23 years with special emphasis on research towards steady-state operation of tokamak. Topics included are observation of large bootstrap current fraction, negative shear scenario, demonstration of efficient beam and EC current drive, discovery of current hole, stabilization of the RWM, discovery of ITB (internal transport barrier).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Minority Ion Measurements During ICRF Experiments in Alcator C-Mod

ICRF is the primary auxiliary heating in C-Mod where both H or {sup 3}He minority and mode conversion regimes are utilized. For transport analysis, the power deposition profile is critical and measuring the resulting fast ion distribution provides a direct means to constrain and validate ICRF simulations used to calculate power deposition. In mode conversion, measurement of the minority ion density, temperature, and velocity profiles is critical for the wave physics and may provide some insight into the fundamental physics of flow drive. Using active charge exchange, the He{sup +1} 4686A or H 6563A line is observed to find whether fast ion and relevant thermal ion measurements are practical. Results of these experiments yield fast ion and thermal ion measurements in D(He). A new analysis technique to extract information from high noise fast ion spectra is developed. A development path for improved D({sup 3}He) and D(H) is indicated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stability and variations of plasma parameters in the L-2M stellarator during excitation of the induction current in the regime of ECR plasma heating

Results are presented from experimental studies of variations in the plasma parameters during the excitation of a multiaxis magnetic configuration by the induction current (up to 17 kA) in the basic magnetic configuration of the L-2M stellarator in the regime of ECR heating at a microwave power of {approx}200 kW ({approx}1 MW m{sup -3}) and an average plasma density of (1-2) x 10{sup 19} m{sup -3}. The current direction was chosen to reduce the net rotational transform (the so-called 'negative' current). The current was high enough for the rotational transform to change its sign inside the plasma column. Computer simulations of the L-2M magnetic structure showed that the surface with a zero rotational transform is topologically unstable and gives rise to magnetic islands, i.e., to a multiaxis magnetic configuration. Magnetic measurements showed that, at negative currents above 10 kA, intense bursts of MHD oscillations with a clearly defined toroidal mode number n = 0 were observed in the frequency range of several kilohertz. Unfortunately, the experimental data are insufficient to draw the final conclusion on the transverse structure of these oscillations. The radial temperature profiles along the stellarator major radius in the equatorial plane were studied. It is found that the electron temperature decreases by a factor of 1.3 in the plasma core (r/a {<=} 0.6) and that the temperature jump is retained near the boundary. A change in turbulent fluctuations of the plasma density during the excitation of a negative current was studied using wave scattering diagnostics. It is found that the probability density function of the increments of fluctuations in the plasma core differs from a Gaussian distribution. The measured distribution is heavy-tailed and broadens in the presence of the current. It is found that the spectrum of turbulent fluctuations and their Doppler shift near the plasma boundary are nonuniform in the radial direction. This may be attributed to the shear of the poloidal velocity. The experimental results indicate that the formation of regions with a zero rotational transform in the plasma core somewhat intensifies plasma transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron thermal transport within magnetic islands in the reversed-field pinch

Tearing mode induced magnetic islands have a significant impact on the thermal characteristics of magnetically confined plasmas such as those in the reversed-field pinch (RFP). New Thomson scattering diagnostic capability on the Madison Symmetric Torus (MST) RFP has enabled measurement of the thermal transport characteristics of islands. Electron temperature (T{sub e}) profiles can now be acquired at 25 kHz, sufficient to measure the effect of an island on the profile as the island rotates by the measurement point. In standard MST plasmas with a spectrum of unstable tearing modes, remnant islands are present in the core between sawtoothlike reconnection events. Associated with these island remnants is flattening of the T{sub e} profile inside the island separatricies. This flattening is characteristic of rapid parallel heat conduction along helical magnetic field lines. In striking contrast, a temperature gradient within an m=1, n=5 island is observed in these same plasmas just after a sawtooth event when the m=1, n=5 mode may briefly come into resonance near the magnetic axis. This suggests local heating and relatively good confinement within the island. Local power balance calculations suggest reduced thermal transport within this island relative to the confinement properties of standard MST discharges between reconnection events. The magnetic field and island structure is modeled with three-dimensional nonlinear resistive magnetohydrodynamic simulations (DEBS code) with Lundquist numbers matching those in MST during standard discharges. During improved confinement plasmas with reduced tearing mode activity, temperature fluctuations correlated with magnetic signals are small with characteristic fluctuation amplitudes of order T-tilde{sub e}/T{sub e}approx2%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Change of Paradigm for the Reversed Field Pinch

The reversed field pinch (RFP) is a magnetic configuration germane to the tokamak, but it produces most of its magnetic field by the currents flowing inside the plasma; external coils provide only a small edge toroidal field whose sign is reversed with respect to the central one, whence the name of the configuration. Because of the presence of magnetic turbulence and chaos, the RFP had been considered for a long period as a terrible confinement configuration. However, recently a change of paradigm occurred for this device. Indeed, when the toroidal current is increased in the RFX-mod RFP in Padua (Italy), a self-organized helical state with an internal transport barrier (ITB) develops, and a broad zone of the plasma becomes hot (above 1 keV for a magnetic field above 0.8 T). The present theoretical picture of the RFP mainly comes from three-dimensional nonlinear visco-resistive MHD simulations whose dynamics has strong similarities with the experimental one, and triggered the experimental search for RFP states with improved confinement. The RFP ohmic state involves a helical electrostatic potential generating, as an electric drift, the so-called dynamo velocity field. The magnetic topology can bifurcate from a magnetic island to kink-like magnetic surfaces with higher resilience to magnetic chaos. This theoretical scenario was found to be relevant when ITB's enclosing a broad hot domain were discovered. The ITBs occur in the vicinity of the maximum of the safety factor. The new paradigm for the RFP supports its reappraisal as a low-external field, non-disruptive, ohmically heated approach to magnetic fusion, exploiting both self-organization and technological simplicity. Furthermore the RFP has the same Greenwald density limit as the tokamak, and it is an excellent test bed for the efficient control of multiple resistive wall modes. Its helical magnetic structure makes it germane to the stellarator too. As a result the RFP is also useful to bring support to the present two main lines of magnetic confinement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Recent Results on Coupling Fast Waves to High Performance Plasmas on DIII-D

Fast Waves (FWs) at 60 MHz and 90 MHz are used in DIII-D for central electron heating and current drive. Coupling of FWs to high-performance discharges is limited by low antenna loading in these regimes. To extend the application of high-power FWs to such regimes, methods of increasing the antenna loading in these regimes are needed. A systematic study of loading enhancement techniques has been carried out in DIII-D, including reduction of the antenna/plasma distance, gas puffing into the far scrape-off layer (SOL), and control of other parameters that affect the particle balance in the far SOL. Quantitative understanding of the physics of the loading resistance and its dependence on edge density profiles is demonstrated. The core FW heating efficiency appeared to be {approx}100% in the Advanced Inductive regime, consistent with the high first-pass direct electron absorption of {approx}75% that is predicted by the ray-tracing code GENRAY in this high electron beta regime.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electron Current Drive by Fusion-Product-Excited Lower Hybrid Drift Instability

We present first principles simulations of the direct collisionless coupling of the free energy of fusion-born ions into electron current in a magnetically confined fusion plasma. These simulations demonstrate, for the first time, a key building block of some 'alpha channeling' scenarios for tokamak experiments. Spontaneously excited obliquely propagating waves in the lower hybrid frequency range undergo Landau damping on resonant electrons, drawing out an asymmetric tail in the electron parallel velocity distribution, which carries a current.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗