SEARCH · Engineering Papers

Results for “Stokes equations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

All sources NASA NTRS DOE OSTI

NASA NTRS1993

Design efficiency evaluation for transonic airfoil optimization - A case for Navier-Stokes design

A constrained-optimization design method which improves the aerodynamic performance of transonic airfoils is evaluated from a design-quality and design-efficiency viewpoint. Design efficiency is a measure of the performance improvement and the design time (CPU time). Total-airfoil design and upper-surface design are performed using the Euler and Navier-Stokes equations with several grids, and are evaluated using the Navier-Stokes equations to determine the anticipated physical design response. Even though the cost of the Euler design is lower than Navier-Stokes design, the Navier-Stokes evaluation indicates that the Euler design does not necessarily improve the aerodynamic performance. Therefore, the design optimization should be based on an accurate flow simulation to achieve an actual performance improvement, and the design time is a secondary concern.

Hager, J. O.↗

NASA NTRS1973

Partial implicitization

The steady-state solution to the full Navier-Stokes equations for complicated flows is generally difficult to obtain. The Burgers (1948) equation is used as a model of the Navier-Stokes equations. The steady-state solution is obtained by a one-step explicit technique resulting from a partial implicitization of the difference equation. Stability analysis shows that the technique is unconditionally stable, and numerical tests show the technique to be accurate.

Graves, R. A., Jr.↗

NASA NTRS1988

Navier-Stokes solutions of flowfield characteristics produced by ice accretion

The flowfield and resultant heat transfer rates over a series of ice accretion shapes have been obtained through numerical solutions of the Navier-Stokes equations. The influence of roughness is modeled by including blockage, form drag and stagnation heating effects as source terms in the governing equations. Using the flowfield information obtained from the Navier-Stokes equations the droplet impingement efficiencies are computed using a PNS-type solving scheme. Good agreement is achieved between the numerical results and experimental data.

Scott, J. N.↗

NASA NTRS1989

Numerical modeling of turbulent supersonic reacting coaxial jets

The paper considers the mixing and subsequent combustion within turbulent reacting shear layers. A computer program was developed to solve the axisymmetric Reynolds averaged Navier-Stokes equations. The numerical method integrates the Reynolds averaged Navier-Stokes equations using a finite volume approach while advancing the solution forward in time using a Runge-Kutta scheme. Three separate flowfields are investigated and it is found that no single turbulence model considered could accurately predict the degree of mixing for all three cases.

Eklund, Dean R.↗

NASA NTRS1991

Adjoint operator approach to shape design for internal incompressible flows

The problem of determining the profile of a channel or duct that provides the maximum static pressure rise is solved. Incompressible, laminar flow governed by the steady state Navier-Stokes equations is assumed. Recent advances in computational resources and algorithms have made it possible to solve the direct problem of determining such a flow through a body of known geometry. It is possible to obtain a set of adjoint equations, the solution to which permits the calculation of the direction and relative magnitude of change in the diffuser profile that leads to a higher pressure rise. The solution to the adjoint problem can be shown to represent an artificially constructed flow. This interpretation provides a means to construct numerical solutions to the adjoint equations that do not compromise the fully viscous nature of the problem. The algorithmic and computational aspects of solving the adjoint equations are addressed. The form of these set of equations is similar but not identical to the Navier-Stokes equations. In particular some issues related to boundary conditions and stability are discussed.

Cabuk, H.↗

NASA NTRS1992

Optimum design of ninety degree bends

An algorithm for the optimum design of an internal flow component to obtain the maximum pressure rise is presented. Maximum pressure rise in a duct with simultaneous turning and diffusion is shown to be related to the control of flow separation on the passage walls. Such a flow is usually associated with downstream conditions that are desirable in turbomachinery and propulsion applications to ensure low loss and stable performance. The algorithm requires the solution of an 'adjoint' problem in addition to the 'direct' equations governing the flow in a body, which in the present analysis are assumed to be the laminar Navier-Stokes equations. The theoretical framework and computational algorithms presented in this study are for the steady Navier-Stokes equations. A procedure is developed for the numerical solution of the adjoint equations. This procedure is coupled with a direct solver in a design iteration loop, that provides a new shape with a higher pressure rise. This procedure is first validated for the design of optimum plane diffusers in two-dimensional flow. The direct Navier-Stokes and the 'adjoint' equations are solved using a finite volume formulation for spatial discretization in an artificial compressibility framework. A simplified version of the above approach is then utilized to design ninety degree diffusing bends. Calculations were carried out for a mean radius ratio at inlet of 2.5 and Reynolds numbers varying from 100 to 500. While at this stage laminar flows is assumed, it is shown that a similar approach can be conceived for turbulent flows.

Modi, Vijay↗

NASA NTRS1994

Numerical study of the effects of icing on viscous flow over wings

An improved hybrid method for computing unsteady compressible viscous flows is presented. This method divides the computational domain into two zones. In the outer zone, the unsteady full-potential equation (FPE) is solved. In the inner zone, the Navier-Stokes equations are solved using a diagonal form of an alternating-direction implicit (ADI) approximate factorization procedure. The two zones are tightly coupled so that steady and unsteady flows may be efficiently solved. Characteristic-based viscous/inviscid interface boundary conditions are employed to avoid spurious reflections at that interface. The resulting CPU times are less than 60 percent of that required for a full-blown Navier-Stokes analysis for steady flow applications and about 60 percent of the Navier-Stokes CPU times for unsteady flows in non-vector processing machines. Applications of the method are presented for a rectangular NACA 0012 wing in low subsonic steady flow at moderate and high angles of attack, and for an F-5 wing in steady and unsteady subsonic and transonic flows. Steady surface pressures are in very good agreement with experimental data and are essentially identical to Navier-Stokes predictions. Density contours show that shocks cross the viscous/inviscid interface smoothly, so that the accuracy of full Navier-Stokes equations can be retained with a significant savings in computational time.

Sankar, L. N.↗

NASA NTRS1991

Calculation of hypersonic shock structure using flux-split algorithms

There exists an altitude regime in the atmosphere that is within the continuum domain, but wherein the conventional Navier-Stokes equations cease to be accurate. The altitude limits for this so called continuum transition regime depend on vehicle size and speed. Within this regime the thickness of the bow shock wave is no longer negligible when compared to the shock stand-off distance and the peak radiation intensity occurs within the shock wave structure itself. For this reason it is no longer valid to treat the shock wave as a discontinuous jump and it becomes necessary to compute through the shock wave itself. To accurately calculate hypersonic flowfields, the governing equations must be capable of yielding realistic profiles of flow variables throughout the structure of a hypersonic shock wave. The conventional form of the Navier-Stokes equations is restricted to flows with only small departures from translational equilibrium; it is for this reason they do not provide the capability to accurately predict hypersonic shock structure. Calculations in the continuum transition regime, therefore, require the use of governing equations other than Navier-Stokes. Several alternatives to Navier-Stokes are discussed; first for the case of a monatomic gas and then for the case of a diatomic gas where rotational energy must be included. Results are presented for normal shock calculations with argon and nitrogen.

Eppard, W. M.↗

NASA NTRS1991

Development of a grid-independent approximate Riemannsolver

A grid-independent approximate Riemann solver for use with the Euler and Navier-Stokes equations was introduced and explored. The two-dimensional Euler and Navier-Stokes equations are described in Cartesian and generalized coordinates, as well as the traveling wave form of the Euler equations. The spatial and temporal discretization are described for both explicit and implicit time-marching schemes. The grid-aligned flux function of Roe is outlined, while the 5-wave grid-independent flux function is derived. The stability and monotonicity analysis of the 5-wave model are presented. Two-dimensional results are provided and extended to three dimensions. The corresponding results are presented.

Rumsey, Christopher Lockwood↗

NASA NTRS1992

CAN-DO, CFD-based Aerodynamic Nozzle Design and Optimization program for supersonic/hypersonic wind tunnels

A design program is developed which incorporates a modern approach to the design of supersonic/hypersonic wind-tunnel nozzles. The approach is obtained by the coupling of computational fluid dynamics (CFD) with design optimization. The program can be used to design a 2D or axisymmetric, supersonic or hypersonic, wind-tunnel nozzles that can be modeled with a calorically perfect gas. The nozzle design is obtained by solving a nonlinear least-squares optimization problem (LSOP). The LSOP is solved using an iterative procedure which requires intermediate flowfield solutions. The nozzle flowfield is simulated by solving the Navier-Stokes equations for the subsonic and transonic flow regions and the parabolized Navier-Stokes equations for the supersonic flow regions. The advantages of this method are that the design is based on the solution of the viscous equations eliminating the need to make separate corrections to a design contour, and the flexibility of applying the procedure to different types of nozzle design problems.

Korte, John J.↗

NASA NTRS1993

Preconditioned conjugate-gradient methods for low-speed flow calculations

An investigation is conducted into the viability of using a generalized Conjugate Gradient-like method as an iterative solver to obtain steady-state solutions of very low-speed fluid flow problems. Low-speed flow at Mach 0.1 over a backward-facing step is chosen as a representative test problem. The unsteady form of the two dimensional, compressible Navier-Stokes equations is integrated in time using discrete time-steps. The Navier-Stokes equations are cast in an implicit, upwind finite-volume, flux split formulation. The new iterative solver is used to solve a linear system of equations at each step of the time-integration. Preconditioning techniques are used with the new solver to enhance the stability and convergence rate of the solver and are found to be critical to the overall success of the solver. A study of various preconditioners reveals that a preconditioner based on the Lower-Upper Successive Symmetric Over-Relaxation iterative scheme is more efficient than a preconditioner based on Incomplete L-U factorizations of the iteration matrix. The performance of the new preconditioned solver is compared with a conventional Line Gauss-Seidel Relaxation (LGSR) solver. Overall speed-up factors of 28 (in terms of global time-steps required to converge to a steady-state solution) and 20 (in terms of total CPU time on one processor of a CRAY-YMP) are found in favor of the new preconditioned solver, when compared with the LGSR solver.

Ajmani, Kumud↗

NASA NTRS1993

Preconditioned Conjugate Gradient methods for low speed flow calculations

An investigation is conducted into the viability of using a generalized Conjugate Gradient-like method as an iterative solver to obtain steady-state solutions of very low-speed fluid flow problems. Low-speed flow at Mach 0.1 over a backward-facing step is chosen as a representative test problem. The unsteady form of the two dimensional, compressible Navier-Stokes equations are integrated in time using discrete time-steps. The Navier-Stokes equations are cast in an implicit, upwind finite-volume, flux split formulation. The new iterative solver is used to solve a linear system of equations at each step of the time-integration. Preconditioning techniques are used with the new solver to enhance the stability and the convergence rate of the solver and are found to be critical to the overall success of the solver. A study of various preconditioners reveals that a preconditioner based on the lower-upper (L-U)-successive symmetric over-relaxation iterative scheme is more efficient than a preconditioner based on incomplete L-U factorizations of the iteration matrix. The performance of the new preconditioned solver is compared with a conventional line Gauss-Seidel relaxation (LGSR) solver. Overall speed-up factors of 28 (in terms of global time-steps required to converge to a steady-state solution) and 20 (in terms of total CPU time on one processor of a CRAY-YMP) are found in favor of the new preconditioned solver, when compared with the LGSR solver.

Ajmani, Kumud↗

NASA NTRS1991

Stationary turbulent closure via the Hopf functional equation

Explicit solutions of the stationary Hopf equation are discussed and their computational possibilities are explored. The motivation is to circumvent the infinite hierarchy of coupled equations for the velocity moments and obtain an exact closure of the steady-state 3D Navier-Stokes equations, without modeling assumptions or truncation. The Hopf formulation of the Navier-Stokes equation is reviewed. A stationary homogeneous solution for 2D flow is displayed and discussed. It is shown how depletion of nonlinearity may arise for 3D forced homogeneous flow. The general 3D forced case is considered and a method for closing the 3D unforced equations with arbitrary boundary conditions is derived.

Shen, Hubert H.↗

NASA NTRS1985

A mixed pseudospectral/finite difference method for a thermally driven fluid in a nonuniform gravitational field

A numerical study of the steady, axisymmetric flow in a heated, rotating spherical shell is conducted to model the Atmospheric General Circulation Experiment (AGCE) proposed to run aboard a later shuttle mission. The AGCE will consist of concentric rotating spheres confining a dielectric fluid. By imposing a dielectric field across the fluid a radial body force will be created. The numerical solution technique is based on the incompressible Navier-Stokes equations. In the method a pseudospectral technique is based on the incompressible Navier-Stokes equations. In the method a pseudospectral technique is used in the latitudinal direction, and a second-order accurate finite difference scheme discretizes time and radial derivatives. This paper discusses the development and performance of this numerical scheme for the AGCE which has been modelled in the past only by pure FD formulations. In addition, previous models have not investigated the effect of using a dielectric force to simulate terrestrial gravity. The effect of this dielectric force on the flow field is investigated as well as a parameter study of varying rotation rates and boundary temperatures. Among the effects noted are the production of larger velocities and enhanced reversals of radial temperature gradients for a body force generated by the electric field.

Macaraeg, M. G.↗

NASA NTRS1986

A verification of unsteady Navier-Stokes solutions around oscillating airfoils

A finite difference solution code for the two dimensional Navier-Stokes equations was combined with a moving-grid system. The thin layer Navier-Stokes equations with a turbulence model are solved in a time-accurate manner in order to study the unsteady aerodynamics around airfoils undergoing small amplitude pitching or heaving motions in the transonic regime. The accuracy of the solutions obtained by the use of the present moving-grid technqiue is investigated. The effects of the minimum grid size and the integrating time-step size on the solutions are also checked. Some of the solutions obtained by the present method are compared with experimental results. It is demonstrated that the unsteady aerodynamics around oscillating airfoils can be predicted fairly well by the present code for cases in which the dynamic angle of attack or displacement is small.

Nakamichi, J.↗

NASA NTRS1990

Combination Of Techniques For Computing Incompressible Flow

Pseudocompressibility, upwind differencing, and other techniques used to solve Navier-Stokes equations. Scheme for finite-difference numerical solution of two-dimensional Navier-Stokes equations of incompressible flow combines several recently developed methods, each developed to increase speed and/or accuracy of computations of this kind.

Kwak, D.↗

NASA NTRS1994

Development of advanced Navier-Stokes solver

The objective of research was to develop and validate new computational algorithms for solving the steady and unsteady Euler and Navier-Stokes equations. The end-products are new three-dimensional Euler and Navier-Stokes codes that are faster, more reliable, more accurate, and easier to use. The three-dimensional Euler and full/thin-layer Reynolds-averaged Navier-Stokes equations for compressible/incompressible flows are solved on structured hexahedral grids. The Baldwin-Lomax algebraic turbulence model is used for closure. The space discretization is based on a cell-centered finite-volume method augmented by a variety of numerical dissipation models with optional total variation diminishing limiters. The governing equations are integrated in time by an implicit method based on lower-upper factorization and symmetric Gauss-Seidel relaxation. The algorithm is vectorized on diagonal planes of sweep using two-dimensional indices in three dimensions. Convergence rates and the robustness of the codes are enhanced by the use of an implicit full approximation storage multigrid method.

Yoon, Seokkwan↗

NASA NTRS1991

A Fourier-Chebyshev pseudospectral method for solving steady 3-D Navier-Stokes and heat equations in cylindrical cavities

A Fourier-Chebyshev pseudospectral method for solving steady 3D Navier-Stokes equations in cylindrical cavities is presented and discussed. The general method is pseudo-unsteady and uses a semi-implicit finite difference scheme for the time discretization. The generalized ADI (Alternating Direction Implicit) procedure is then applied to reduce the problem to a successive solution of one-dimensional problems. The spatial approximation uses a Fourier-Galerkin approximation in the periodic direction and a Chebyshev-collocation approximation in the other directions. Difficulties related to the pressure are surmounted by using the artifical compressibility method. A suitable variable change was chosen to avoid the problem of singularity at the axis generated by cylindrical coordinates. The method is first tested on an advection-diffusion equation and then on the Navier-Stokes equations. Finally, the method is illustrated by a convection problem of a differentially heated fluid.

Pulicani, J. P.↗