Gradient Composition Sol-Gel Materials
The STARDUST Mission, which launched in February of 1999, plans to fly through the coma of Comet 81P/Wild2, capture some of the material ejected by the comet, and return the samples to Earth in 2006.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The STARDUST Mission, which launched in February of 1999, plans to fly through the coma of Comet 81P/Wild2, capture some of the material ejected by the comet, and return the samples to Earth in 2006.
Spacecraft flybys of small solar system bodies provide important science return in the form of images of the target body taken around closest approach. In order to maximize the number of images taken of the target, an autonomous closed-loop tracking system has been developed to maintain lock on the target during the flyby. The system uses images to estimate the spacecrafts target-relative position and attitude, which is then used to point the camera. The system has been successfully used twice: the Deep Space 1 flyby of comet Borrelly and the Stardust flyby of asteroid Annefrank. This paper describes in detail the tracking algorithms and flight results.
Samples of outer solar system carbon in various forms are available for analysis in the laboratory. The Stardust Mission returned organics and a few carbonate grains from Jupiter Class comet Wild-2 [1]. These complement similar phases available in chondritic interplanetary dust particles, some of which derive from comets, although it is not definitively known which have that origin. Carbonaceous chondrites probably derive from C-complex asteroids which may have outer solar system origins, though this origin is model dependent. There are rare carbonaceous xenoliths in, principally, ordinary chondrites and ureilites whose bulk isotopic and bulk chemical compositions suggest an origin farther from the Sun that the remainder of carbonaceous chondrites [2,3]. These contain abundant carbonaceous materials, including organic-bearing aqueous fluid inclusions [4]. The Hayabusa2 spacecraft recently returned samples of C-class asteroid Ryugu to Earth, now being analyzed in labs worldwide. These materials are expected to be dominated by materials similar to C1 and C2 carbonaceous chondrites [5].
The cleanrooms used to curate NASA’s Astromaterials samples are carefully monitored for particulate and inorganic contamination. The clean labs also have a very limited set of acceptable materials and cleaning agents to further minimize the potential for contamination. Labs are cleaned primarily with isopropyl alcohol. Astromaterials samples are handled with tools made of stainless steel (304 or 316), Teflon, or aluminum alloy (6061). Although our current collections are not particularly susceptible to biological alteration or organic contamination, this will not be the case for new collections from the OSIRIS-REx mission, Hayabusa2, and from Mars Sample Return. Therefore, it is necessary to develop and test methods to reduce the bioburden in astromaterials cleanrooms without introducing unwanted contaminants. We will report on the results of three case studies where 7.5 wt% hydrogen peroxide was prepared from a stock solution of ultrapure 30 wt% hydrogen peroxide (JT Baker) using curation-grade ultrapure water. We followed CDC (Center for Disease Control) guidelines for using hydrogen peroxide as a high level disinfectant. This solution was used to clean a glovebox prior to processing Apollo samples, as well as surfaces in the Antarctic meteorite processing lab and Stardust lab after facilities monitoring indicated an unwanted increase in bioburden. In all three instances, the culturable bioburden was significantly reduced after a 30 min. exposure to the 7.5% hydrogen peroxide solution without a corresponding increase in inorganic or organic contamination. We observed 77 to 100% reductions in the bioburden recovery rate. In one case study, we also performed amplicon DNA sequencing on samples collected from the surfaces before and after cleaning. We observed a significant change in microbial community composition after peroxide cleaning. These results suggest that routine cleaning with hydrogen peroxide could be an effective way to control bioburden in astromaterials cleanrooms and other facilities with strict contamination control requirements.
This paper compares recent Hayabusa 2 spectral measurements with state-of-the-art shock-layer radiation simulations resulting from the LAURA/HARA code suite. These simulations include coupled ablation, which accounts for the injection of ablation products into the flowfield, and coupled radiation, which accounts for radiative energy loss in the flowfield. To enable the coupled ablation simulations, a best-estimate model is developed for Hayabusa’s carbon-phenolic ablator, based on the limited available published information. The comparison between the simulations and measurements focuses on two atomic nitrogen lines and two atomic oxygen lines, as well as the CN Violet band system. For the atomic lines, the measurements and simulations agree within 25% over most of the trajectory. This excellent agreement is unprecedented for observed radiation measurements of atomic lines, where previous Stardust and Hayabusa 1 comparisons were significantly worse. The improved agreement for these Hayabusa 2 comparisons is both the result of improved measurement quality and enhanced flowfield/radiation modeling. To provide a link between these observed radiation measurements and the radiative heating to a vehicle surface, the recently developed flowfield property binning approach is used to identify flowfield properties that provide the dominant emission contribution to the measured spectrum. These identified flowfield properties are then shown to match those for the surface radiative heating to the currently developed Mars Sample Return (MSR) Earth Entry System (EES) at a specific trajectory point and surface location. This matching of flowfield properties indicates that this EES radiative heating and Hayabusa 2 observed radiation simulations are equivalent radiation problems. Therefore, the excellent agreement between Hayabusa 2 measurements and simulations may be leveraged to inform the radiation heating margin for the MSR EES.
The cleanrooms used to curate NASA’s Astromaterials samples are carefully monitored for particulate and inorganic contamination. The clean labs also have a very limited set of acceptable materials and cleaning agents to further minimize the potential for contamination. Labs are cleaned primarily with isopropyl alcohol. Astromaterials samples are handled with tools made of stainless steel (304 or 316), Teflon, or aluminum alloy (6061). Although our current collections are not particularly susceptible to biological alteration or organic contamination, this will not be the case for new collections from the OSIRIS-REx mission, Hayabusa2, and from Mars Sample Return. Therefore, it is necessary to develop and test methods to reduce the bioburden in astromaterials cleanrooms without introducing unwanted contaminants. We will report on the results of three case studies where 7.5 wt% hydrogen peroxide was prepared from a stock solution of ultrapure 30 wt% hydrogen peroxide (JT Baker) using curation-grade ultrapure water. We followed CDC (Center for Disease Control) guidelines for using hydrogen peroxide as a high level disinfectant. This solution was used to clean a glovebox prior to processing Apollo samples, as well as surfaces in the Antarctic meteorite processing lab and Stardust lab after facilities monitoring indicated an unwanted increase in bioburden. In all three instances, the culturable bioburden was significantly reduced after a 30 min. exposure to the 7.5% hydrogen peroxide solution without a corresponding increase in inorganic or organic contamination. We observed 77 to 100% reductions in the bioburden recovery rate. In one case study, we also performed amplicon DNA sequencing on samples collected from the surfaces before and after cleaning. We observed a significant change in microbial community composition after peroxide cleaning. These results suggest that routine cleaning with hydrogen peroxide could be an effective way to control bioburden in astromaterials cleanrooms and other facilities with strict contamination control requirements.
The Origins, Spectral Interpretation, Resource Identification, Security, Regolith Explorer (OSIRIS-REx) is a NASA asteroid sampling mission that launched on September 8, 2016. Its objectives are to study the asteroid Bennu for up to 505 days and obtain at least 60 grams of pristine regolith. The sample return to Earth is planned for September 2023. For contingency planning and risk assessment of a potential off-nominal Earth-return trajectory, a re-entry breakup analysis was performed to determine the response of the spacecraft to the environment and predict the breakup sequence and timeline, debris survival, and debris impact conditions. The failure scenario assumed a failure to separate between the bus and the sample return capsule (SRC), resulting in the combined bus+SRC configuration for the re-entry vehicle. Furthermore, consistent overburns or underburns were considered to produce three sets of initial conditions for the analysis consisting of nominal, steep, and shallow entry flight path angles. The results were compared to the breakup analysis performed for a similar vehicle, the Stardust spacecraft, which returned samples from the comet Wild 2 in 2006. This paper describes the OSIRIS-REx spacecraft and presents the results of the re-entry breakup analysis.
Phenolic Impregnated Carbon Ablator (PICA) gained heritage during the Stardust mission and is the baseline thermal protection system (TPS) material for missions to Mars. However, PICA is friable, so a thin layer of siloxane resin (NuSil) is applied to the surface of the heatshield to suppress the spread of particulate matter during cleanroom activities. Until recently, the thermochemical response of NuSil had not been accounted for in material response models. Therefore, a test campaign was executed at the Hypersonic Materials Environmental Test System (HyMETS) facility to investigate the material response of NuSil and provide crucial insight for model development. Finally, salient results from an experiment supported by the Asteroid Threat Assessment Project (ATAP) will be discussed, which probed the material response of the Tamdakht meteorite and notable analogs. Bio: Dr. Bessire is a senior research scientist in the thermal protection system materials branch at the NASA Ames Research Center. His research focuses on developing analytical techniques designed to inform and validate the development of material response models.
Introduction: NASA has constructed two new cleanrooms to house materials from the OSRIS-REx and Hayabusa2 missions to the asteroids Ryugu (162173) and Bennu (101955), respectively. In accordance with standard astromaterials curation practices, these cleanrooms will be monitored for particulate contamination and maintained to ISO 5 equivalent standards1. Since the samples in these collections are expected to contain prebiotic organic compounds that may help explain the origin of life on Earth, these labs will also be monitored for organic and biological contamination2. Samples from Ryugu arrived on Earth in December, 2020. After basic characterization in Japan, NASA received a subset of these samples at the astromaterials curation facility in Houston in December of 2021. OSIRIS-REx is expected to return samples in September, 2023. Here we present preliminary microbial monitoring results from monthly monitoring of these new labs and the connected microtomy and staging areas that support them, as they are being commissioned. We also compare these results to baseline values for other astromaterials curation labs. We will also briefly describe additional cleaning efforts employed to reduce the bioburden in these new cleanrooms. Methods: Microbial samples were collected from surfaces using a dry macrofoam swab (Puritan Brand 2518051PFRNDFD). Swabs were also opened in the lab but not touched to any surfaces to function as negative controls. Samples and controls were processed inside a class II biosafety cabinet to avoid inadvertent cross contamination. The swabs were suspended in 15 ml of PBS (Phosphate Buffered Saline) and vortexed for 20 seconds to remove cells from the swab surface. The PBS was used to inoculate Petri dishes filled with TSA (Tryptic Soy Agar), Blood Agar, or Reasoners 2 agar to check for microbial growth. Each plate was inoculated with 0.1 ml of PBS. The TSA and blood agar plates were incubated at 35˚C and the Reasoners 2 agar plates were incubated at 25˚C for seven days. Petri dishes filled with Potato dextrose agar, Saboraud dextrose agar, or Saboraud dextrose agar with 0.1 mg/ml of chloramphenicol, an antibiotic, were used to check for fungal growth. These plates were inoculated with 0.3 ml of PBS and incubated at 30˚C. The remaining PBS was frozen at -80 ˚C for DNA sequencing. After incubation, isolates were counted and reisolated for identification. Isolates were identified using the VITEK23 system or by sequencing a portion of the 16S rRNA gene for bacteria or the ribosomal internal transcribed spacer (ITS) for fungi. Sequencing was performed with an ABI 3500 Sanger sequencer. Results: During our initial sampling, six of the seven sites sampled (86%) displayed bacterial or fungal growth. Samples collected from the staging areas and microtomy labs are not included in this calculation since those areas are maintained at a lower ISO 7 equivalent cleanliness standard. A month later, only three of the seven sites (43%) displayed bacterial growth. No fungal growth was detected in the second sampling. Since new equipment had been introduced to the Hayabusa2 lab since the first round of sampling, an additional three sampling sites were included in the second round of sampling. None of these sites displayed microbial growth. These sites will be included in all future sampling efforts. Bacterial isolates have been identified from the following genera at multiple time points: Micrococcus, Staphylococcus, and Bacillus. Isolates from the genera: Microbacterium, Nocardioides, Methylocystis, and Microvirga were identified in the initial sampling, but were not present at later time points. Identification of fungal isolates is in progress. Results are summarized in Table 1. Discussion: The recovery rate or percentage of positive samples4 was initially 86%, which is higher than the median recovery rate for comparable ISO 5 equivalent curation labs like Stardust (33%), Hayabusa (33%), and Cosmic Dust (50%). However, after a month of operation, the recovery rate for these same sites decreased to 43%, which is similar to what we observe in comparable curation cleanrooms with no microbial control requirements. Adding in the new sampling sites further decreases the recovery rate to 30%. With the reduction in recovery rate, we also observed a decrease in microbial diversity. At the first time point, we observed at least 10 different bacterial species and at least two different fungi. This is a higher diversity than the median values for comparable ISO 5 equivalent labs (2-4 isolates per sampling event). After the second sampling, we observed at least 4 bacterial species and no fungi, which is more consistent with comparable labs. We expect the recovery rate and diversity in both labs to continue to decrease as routine operation continues. We will use ultrapure hydrogen peroxide to disinfect equipment and work areas prior to opening any sample containers. Most of the bacterial and fungal isolates were detected on samples from the cleanroom floors. This is consistent with baseline results from other curation labs. Organisms from the genera Bacillus, Staphylococcus, and Micrococcus that were repeatedly detected are common in cleanrooms and on human skin5,6. These organisms are generally thought to be introduced when people enter the cleanroom. Microbacterium, Nocardioides, and Microvirga have also previously been identified in astromaterials cleanrooms, but not as frequently as Bacillus, Staphylococcus, and Micrococcus. Methylocystis is a novel genus in the astromaterials cleanrooms, but it was identified with low accuracy (93% match in the sequenced region of the 16S rRNA gene) and further work is needed to confirm this identification. Microbacterium is a diverse genus with isolates identified from terrestrial and aquatic sediments. Some species of Microbacterium are capable of degrading complex organic compounds found in crude oil. The presence of these bacteria in the OSIRIS REx and Hayabusa2 cleanrooms should be closely monitored. Methylocystis is a genus of methanotrophic bacteria capable of oxidizing methane. If this identification proves to be correct and it is detected again, it should be closely monitored as well. Under nominal operating conditions, samples should not ever encounter the cleanroom floor or other high traffic areas. If we observe an increase in the bioburden in sensitive work areas that appears to be influenced by organism transfer from high traffic areas like the floors, we can employ additional hydrogen peroxide treatments to disinfect high traffic areas. Routine microbial monitoring of these labs will ensure that NASA’s astromaterials collections remain pristine and useful for scientific study. Table 1. Sampling Locations and Colony Counts Bacterial CFUa Fungal CFU Bacterial CFU Fungal CFU Lab - Location 11/2/2021 11/2/2021 12/13/2021 12/13/2021 H2b-Floor 4 8 1 0 H2-staging pass through 3 0 0 0 H2-microtomy pass through TNTCc 0 0 0 H2 Microscope 1 NA NA 0 0 H2 Microscope 2 NA NA 0 0 H2-Table NA NA 0 0 OREXd- microtomy pass through 0 0 6 0 OREX – Anteroom pass through 0 0 0 0 OREX – Floor 1 2 0 0 OREX Witness Foil Table 3 0 1 0 Staging-Floor 16 0 15 0 Microtomy-Floor 3 0 2 0 a: CFU = Colony Forming Unit b: H2 = Hayabusa2 Lab c: TNTC = too numerous to count d: OREX = OSIRIS-REx Lab References: 1. ISO 14644-1:2015 - Cleanrooms and associated controlled environments -- Part 1: Classification of air cleanliness by particle concentration. 37 (2015). 2. McCubbin, F. M. et al. Space Sci Rev 215, (2019). 3. Pincus, D. H. Encyclopedia of Rapid Microbiological Methods (2005). 4. The United States Pharmacopeial Convention. USP General Chapter <1116> 17, 784–794 (2013). 5. Sheraba, N. S., Yassin, A. S. & Amin, M. BMC Research Notes 3, 278 (2010). 6. Utescher, C. L. de A., Franzolin, M. R., Trabulsi, L. R. & Gambale, V. Brazilian Journal of Microbiology 38, 710–716 (2007).
Phenolic Impregnated Carbon Ablator (PICA) gained heritage during the stardust mission and is the baseline material for missions to Mars. The phenolic phase of PICA is friable, and therefore the surface is treated with a siloxane resin (NuSil) to mitigate the shedding of particulate matter. Historically, material response models have not accounted for the presence of this coating. Therefore, a test campaign was executed at the Hypersonic Materials Environmental Test System (HyMETS) to investigate the performance of NuSil under multiple heating rates and gas composition. Sphere-cone models were instrumented with thermocouples to measure the in-depth temperature response, and surface temperatures were monitored with a pyrometer. Furthermore, emission spectrometers were used to collect spectra from species emitting at the surface of the test article and the post-shock stagnation region. Post-test analysis suggests that the coating decomposes according to multiple stages. Inspection of silicon emission data reveals a rapid rise and decline in intensity within the first couple of seconds of testing, which is attributed to pyrolysis of NuSil. Pyrolysis is followed by a stagnation in silicon emission and surface temperature which are attributed to the formation of a thin layer of oxidation-resistant silicon oxycarbide. Moreover, the presence of the silicon oxycarbide layer significantly reduces the in-depth thermal response when compared to the baseline material. Eventually, the silicon oxycarbide layer decomposes via high-temperature reactions, which expose the underlying char layer to a highly reactive flow.
Phenolic Impregnated Carbon Ablator (PICA) is a low-density ablator that has been used as the planetary entry heatshield for several NASA missions since the late 90’s. Its low density and efficient performance characteristics have proven effective for use from Discovery to Flag-ship class missions, from Sample Return missions such as Stardust, OSIRIS-REx to large Mars Lander missions such as Mars Science Lab (MSL) and Mars 2020. The rayon-based carbon precursor raw material used in PICA preform manufacturing has experienced multiple supply chain issues. The challenge involved in finding a replacement fiber source is in processing as well as in the final performance of the ablator. Each replacement necessitates the requalification of the PICA. This has happened at least twice in the past 25 years, and a third substitution is now needed. Due to the obsolescence of the input foreign rayon fiber source, a new variant of PICA has been developed using a domestic rayon-like fiber source, Lyocell. Due to its flight heritage and proven capability, PICA is baselined as the Thermal Protection System (TPS) for Dragonfly and Mars Sample Return Sample Retrieval Lander mission and is being considered for the backshell of the Mars Sample Return Earth Entry System. All three missions are due to be launched between 2026 and 2028. The challenge this time is to ensure the PICA made with domestic material is a suitable replacement to the heritage PICA used in MSL and Mars 2020 so that the design of the heatshield can be matured without much risk. Results are presented from the recent efforts of 22 PICA-D billets that were Lot Acceptance Tested. Thermal, mechanical, and representative environment arc-jet tests have been conducted. Testing of PICA-Domestic (PICA-D) indicates very comparable performance with respect to “heritage” PICA materials and thus PICA-D is expected to be a sustainable and nearly a “drop-in” replacement solution for future NASA missions.
Recent Hayabusa 2 spectral measurements are compared with state-of-the-art shock-layer radiation simulations resulting from the LAURA/HARA code suite. These simulations include coupled ablation, which accounts for the injection of ablation products into the flowfield, and coupled radiation, which accounts for radiative energy loss in the flowfield. To enable the cou- pled ablation simulations, a best-estimate model is developed for Hayabusa’s carbon-phenolic ablator based on available published information. The comparison between the simulations and measurements focuses on three atomic nitrogen lines, two atomic oxygen lines, one atomic hydrogen line, and the CN Violet band system. Parametric uncertainties are evaluated for these features using a recently developed capability in LAURA/HARA. These uncertainties capture the impact of flowfield and radiation modeling uncertainties on the observed radiation simulations, and include the impact of coupled radiation and ablation product emission. The resulting parametric uncertainties range from 50 to over 100% for the atomic lines, and 80% for CN Violet. Uncertainties in flowfield kinetics and non-Boltzmann modeling provide the dominant contribution to these uncertainties. For the atomic nitrogen and oxygen lines, com- parisons between the nominal simulations and measurements show agreement well within these simulation uncertainty bounds, with the measurements within 20% of the nominal simulation over most of the trajectory, and within 10% at peak emission. This excellent agreement is un- precedented for observed radiation measurements of atomic lines, where previous Stardust and Hayabusa 1 comparisons were significantly worse. The improved agreement for these Hayabusa 2 comparisons is both the result of improved measurement quality and enhanced flowfield and radiation modeling. For the ablation product emission from the 656 nm atomic hydrogen line, the agreement between measurements and simulations is within ±20% for all trajectory points except one outlier. This good comparison is surprising considering this species depends on the ablation rate and is shown to have strong wake contribution, which both contribute to the large ≈±70% parametric uncertainty. For the ablation product emission from CN Violet, the simulations over-predict the measurements by over a factor of two early in the trajectory, with the comparison improving later in the trajectory. This disagreement for CN Violet is consistent with the ≈±80% parametric uncertainty bounds evaluated for the simulations. To utilize the excellent agreement between the atomic line simulations and measurements in the assessment of the radiative heating margin for a future flight vehicle, the flowfield property binning (FPB) approach is applied. Using the Mars Sample Return (MSR) Earth Entry System (EES) as an example, the combination of the excellent Hayabusa comparisons and the FPB analysis justify nearly a 10% reduction in the radiative heating margin from an assumed baseline margin of 30%. This direct quantitative link between observed radiation measurements and the radia- tive heating margin of future flight vehicles demonstrates the value of these observed radiation measurements.
Phenolic Impregnated Carbon Ablator (PICA) is a low-density ablator that has been used as the planetary entry heatshield for several NASA missions since the late 90’s. Its low density and efficient performance characteristics have proven effective for use from Discovery to Flag-ship class missions, from Sample Return missions such as Stardust, OSIRIS-REx to large Mars Lander missions such as Mars Science Lab (MSL) and Mars 2020. The rayon-based carbon precursor raw material used in PICA preform manufacturing has experienced multiple supply chain issues. The challenge involved in finding a replacement fiber source is in processing as well as in the final performance of the ablator. Each replacement necessitates the requalification of the PICA. This has happened at least twice in the past 25 years, and a third substitution is now needed. Due to the obsolescence of the input foreign rayon fiber source, a new variant of PICA has been developed using a domestic rayon-like fiber source, Lyocell. Due to its flight heritage and proven capability, PICA is baselined as the Thermal Protection System (TPS) for Dragonfly and Mars Sample Return Sample Retrieval Lander mission and is being considered for the backshell of the Mars Sample Return Earth Entry System. All three missions are due to be launched between 2026 and 2028. The challenge this time is to ensure the PICA made with domestic material is a suitable replacement to the heritage PICA used in MSL and Mars 2020 so that the design of the heatshield can be matured without much risk. Results are presented from the recent efforts of 22 PICA-D billets that were Lot Acceptance Tested. Thermal, mechanical, and representative environment arc-jet tests have been conducted. Testing of PICA-Domestic (PICA-D) indicates very comparable performance with respect to “heritage” PICA materials and thus PICA-D is expected to be a sustainable and nearly a “drop-in” replacement solution for future NASA missions.
The Tension Adjustable Network for Deploying Entry Membrane (TANDEM) concept is a phase II NASA Innovative Advanced Concepts (NIAC) project. One of the goals for this project was to extend the application of tensegrity-based rovers to a rideshare concept for a Titan mission. This report provides preliminary details of the TANDEM concept for Titan. System analyses of the entry vehicle were performed and compared to data from the Huygens mission to Titan. The entry aeroshell was based on Huygens and Stardust aeroshells. Modeling, simulation and design of the tensegrity deployment were performed using a nonlinear optimization form-finding algorithm. Lastly, a neuroevolution-based machine learning control strategy was applied, which produced efficient rolling locomotion gaits.
Phenolic impregnated carbon ablator (PICA) is a thermal protection system (TPS) that gained heritage during the Stardust mission and is the baseline TPS material for expeditions to Mars (e.g., Mars Science Laboratory and Mars 2020).1 PICA is friable; therefore, a polysiloxane resin (NuSil CV-1144-0) is deposited onto the surface of flight hardware before assembly, test, and launch operations (ATLO) to mitigate particle shedding. Furthermore, the Mars Science Laboratory (MSL) and Mars 2020 heatshields were instrumented with an array of thermocouple plugs (MEDLI Integrated Sensor Plugs or MISP) designed to measure the in-depth thermal response of PICA during flight. Post-flight analysis of MISP data suggests that recession was lower than predicted, and NuSil is suspected as a reasonable cause. NuSil primarily consists of a copolymer blend of dimethyl and diphenyl-substituted polysiloxane resin. Four decades of research in the field of polymer-derived ceramics demonstrate that polysiloxane resins form oxidation-resistant silicon oxycarbide materials at pyrolysis temperatures as low as 800 °C. -2 Furthermore, silicon oxycarbide materials exhibit excellent thermal stability at relatively high-temperatures (< 1200 °C) but eventually decompose via carbothermal reduction. -3 Therefore, it is reasonable to suggest that NuSil forms an oxidation-resistant thermal barrier coating on the TPS surface and influences the material response during atmospheric entry. Evidence for this notion was observed during prior arc-jet testing at both the Aerodynamic Heating Facility (AHF) and the Panel Test Facility (PTF) at the NASA Ames Research Center. Articles of PICA were subjected to testing in airflow, and a temperature discontinuity was recorded at the surface of coupons coated with NuSil. A glassy coating was observed to form at the surface in shear flow configurations (wedge and panel) under moderate heat fluxes. Furthermore, state-of-the-art material response models have yet to account for the underlying physics and chemistry of the temperature discontinuity. To this end, a pathfinder test campaign was executed at the Hypersonic Materials Environmental Test System (HyMETS) to enhance the fundamental understanding of PICA-NuSil ablation phenomena and provide a preliminary data set to aid in the development of material response models.
The current work presents an efficient simulation framework for rigorously modeling radiative fields emanating from non-equilibrium planetary entry flows in complex three-dimensional domains. Key to this endeavor is adoption of finite-volume discretization in lieu of brute-force ray tracing. This change in conjunction with mesh sweeping and Lebedev-type quadrature for angular integration allows spatial-angular resolution of radiative transfer to be performed in a computationally tractable manner. Additionally, a new methodology has been established to build standalone reduced-order spectral databases for non-equilibrium radiative properties that can be applied to a broad range of hypersonic planetary entry problems with minimal loss in accuracy. The efficacy of the new framework has been demonstrated on the atomic nitrogen radiative system. The resulting reduced-order model requires three orders-of-magnitude fewer spectral evaluations and results in a 95% decrease in memory footprint. A comparative study for representative forebody and afterbody lines-of-sight from Stardust, FIRE II, and meteor entries into the Earth atmosphere indicates that both total intensity variation and detailed spectra can be retrieved with as few as 625 reduced-order groups (contrasting with the 100,000 frequencies in the original full set model). Similarly, three-dimensional predictions of radiative heating experienced by the Orion forebody are in excellent agreement with legacy radiation solvers while requiring only a sliver (roughly 0.5%) of computing wall time.
Phenolic Impregnated Carbon Ablator (PICA) is a low-density ablator that has been used as the planetary entry heatshield for several NASA missions since the late 90’s. Its low density and efficient performance characteristics have proven effective for use from Discovery to Flag-ship class missions, from Sample Return missions such as Stardust, OSIRIS-REx to large Mars Lander missions such as MSL and Mars 2020. Continued development of a more mass efficient and compliant versions of PICA that use a carbon felt as the substrate will be presented. The felt based versions of PICA known as Conformal PICA (C-PICA) and Soft PICA (S-PICA), are very comparable in terms of peak heat-flux capabilities compared to standard PICA. The lower density and of C-PICA and S-PICA further show a much higher thermal protection efficiency and hence more mass savings. The compliant nature of these materials allows for use on a wide variety of substrates and therefore makes it very attractive for commercial low earth orbit missions as well as NASA’s aerocapture missions to Ice Giants. NASA is currently working with several commercial partners (Varda and Inversion Space) to Technology Transfer C/S-PICA variants for commercial LEO missions. Thermal, mechanical, and representative environment arc-jet tests have been conducted comparing the performance of Conformal and Soft-PICA materials.
Initial development of Conformal Phenolic Impregnated Carbon Ablator (C-PICA) ablative TPS occurred under NASA’s Hypersonics Project in the 2000’s and demonstrated very low through-the-thickness thermal conductivity compared to state-of-the-art Phenolic Impregnated Carbon Ablator (PICA). PICA, which was first demonstrated on Stardust, has some inherent limitations that C-PICA improves on, primarily strain to failure. More recently C-PICA has been further matured and a family of C-PICA materials are now ready for consideration as an enabling technology for New Frontiers and other NASA missions. C-PICA has several improvements compared to PICA including: - Higher strain to failure and lower thermal conductivity (up to 55% less than PICA depending on C-PICA variant) - CTE comparable to typical composite carrier structures and also suitable for metallic substructures given high strain to failure - Temperature independent mechanical properties - Suited for single piece (up to ~ 1.5m) or tiled configurations - Larger tiles leading to reduced integration complexity compared to tiled PICA - Reduced mass compared to PICA due to reduced thermal conductivity C-PICA has been tested at heat fluxes ranging from 250-1850 W/cm^2, and shear pressures of 200Pa at 400W/cm^2 with excellent performance. Expertise on manufacturing and integration of C-PICA reside at NASA, and NASA can transition the technology to interested parties via technology transfer.