Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sparse estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Uncertainty and Sensitivity Analysis of Afterbody Radiative Heating Predictions for Earth Entry

The objective of this work was to perform sensitivity analysis and uncertainty quantification for afterbody radiative heating predictions of Stardust capsule during Earth entry at peak afterbody radiation conditions. The radiation environment in the afterbody region poses significant challenges for accurate uncertainty quantification and sensitivity analysis due to the complexity of the flow physics, computational cost, and large number of un-certain variables. In this study, first a sparse collocation non-intrusive polynomial chaos approach along with global non-linear sensitivity analysis was used to identify the most significant uncertain variables and reduce the dimensions of the stochastic problem. Then, a total order stochastic expansion was constructed over only the important parameters for an efficient and accurate estimate of the uncertainty in radiation. Based on previous work, 388 uncertain parameters were considered in the radiation model, which came from the thermodynamics, flow field chemistry, and radiation modeling. The sensitivity analysis showed that only four of these variables contributed significantly to afterbody radiation uncertainty, accounting for almost 95% of the uncertainty. These included the electronic- impact excitation rate for N between level 2 and level 5 and rates of three chemical reactions in uencing N, N(+), O, and O(+) number densities in the flow field.

West, Thomas K., IV↗

Forecasting with the GEOS-CF System and Other NASA Resources to Support Air Quality Management

Air quality (AQ) is a major and growing concern for public health around the world. Economic development, population growth, and climate change are all expected to exacerbate already poor AQ in many regions. Furthermore, AQ is often only sparsely monitored with reference-grade in-situ instruments. NASA resources and products have the potential to help in addressing this AQ data gap. The GEOS-CF (Goddard Earth Observing System – Composition Forecasting) global atmospheric composition modeling system is run each day at a global scale to provide recent estimates and five-day forecasts at hourly temporal resolution of atmospheric constituents relevant to AQ. NASA satellite missions (along with those of other space agencies) provide remotely-sensed estimates of atmospheric composition relevant to AQ. This paper gives a brief overview of these capabilities, and outlines the efforts underway to combine model forecasts, satellite retrievals, and surface-based measurements to provide more comprehensive and accurate estimates and forecasts of local AQ which will be broadly applicable and accessible globally.

GEOS-CF↗

Forecasting with the GESO-CF System and Other NASA Resources to Support Air Quality Management

Air quality (AQ) is a major and growing concern for public health around the world. Economic development, population growth, and climate change are all expected to exacerbate already poor AQ in many regions. Further-more, AQ is often only sparsely monitored with reference-grade in-situ instruments. NASA resources and products have the potential to help in addressing this AQ data gap. The GEOS-CF (Goddard Earth Observing System –Composition Forecasting) global atmospheric composition modeling system is run each day at a global scale to provide recent estimates and five-day forecasts at hourly temporal resolution of atmospheric constituents relevant to AQ. NASA satellite missions (along with those of other space agencies) provide remotely-sensed estimates of atmospheric composition relevant to AQ. This paper gives a brief over-view of these capabilities, and outlines the efforts underway to combine model forecasts, satellite retrievals, and surface-based measurements to provide more comprehensive and accurate estimates and forecasts of local AQ which will be broadly applicable and accessible globally.

Forecasting↗

Adaptive polynomial chaos techniques for uncertainty quantification of a gas cooled fast reactor transient

Uncertainty quantification plays an increasingly important role in the nuclear community, especially with the rise of Best Estimate Plus Uncertainty methodologies. Sensitivity analysis, surrogate models, Monte Carlo sampling and several other techniques can be used to propagate input uncertainties. In recent years however polynomial chaos expansion has become a popular alternative providing high accuracy at affordable computational cost. This paper presents such polynomial chaos (PC) methods using adaptive sparse grids and adaptive basis set construction, together with an application to a Gas Cooled Fast Reactor transient. Comparison is made between a new sparse grid algorithm and the traditionally used technique proposed by Gerstner. An adaptive basis construction method is also introduced and is proved to be advantageous both from an accuracy and a computational point of view. As a demonstration the uncertainty quantification of a 50% loss of flow transient in the GFR2400 Gas Cooled Fast Reactor design was performed using the CATHARE code system. The results are compared to direct Monte Carlo sampling and show the superior convergence and high accuracy of the polynomial chaos expansion. Since PC techniques are easy to implement, they can offer an attractive alternative to traditional techniques for the uncertainty quantification of large scale problems. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Numerical Methods for Large-Scale Data Factorization (Final Report (Milestone Date 9/30/11) for Subcontract No. B594099)

The following work has been performed by PI Hans De Sterck and graduate student Manda Winlaw for the required tasks 1-5 (as listed in the Statement of Work). Graduate student Manda Winlaw has visited LLNL January 31-March 11, 2011 and May 23-August 19, 2010, working with Van Henson and Mike O'Hara on non-negative matrix factorizations (NMF). She has investigated the dense subgraph clustering algorithm from 'Finding Dense Subgraphs for Sparse Undirected, Directed, and Bipartite Graphs' by Chen and Saad, testing this method on several term-document matrices and adapting it to cluster based on the rank of the subgraphs instead of the density. Manda Winlaw was awarded a first prize in the annual LLNL summer student poster competition for a poster on her NMF research. PI Hans De Sterck has developed a new adaptive algebraic multigrid algorithm for computing a few dominant or minimal singular triplets of sparse rectangular matrices. This work builds on adaptive algebraic multigrid methods that were further developed by the PI and collaborators (including Sanders and Henson) for Markov chains. The method also combines and extends existing multigrid algorithms for the symmetric eigenproblem. The PI has visited LLNL February 22-25, 2011, and has given a CASC seminar 'Algebraic Multigrid for the Singular Value Problem' on this work on February 23, 2011. During his visit, he has discussed this work and related topics with Van Henson, Geoffrey Sanders, Panayot Vassilevski, and others. He has tested the algorithm on PDE matrices and on a term-document matrix, with promising initial results. Manda Winlaw has also started to work, with O'Hara, on estimating probability distributions over undirected graph edges. The goal is to estimate probabilistic models from sets of undirected graph edges for the purpose of prediction, anomaly detection and support to supervised learning. Graduate student Manda Winlaw is writing a paper on the results obtained with O'Hara which will be submitted some time later in 2011 to a data mining conference. PI Hans De Sterck has developed a new optimization algorithm for canonical tensor approximation, formulating an extension of the nonlinear GMRES method to optimization problems. Numerical results for tensors with up to 8 modes show that this new method is efficient for sparse and dense tensors. He has written a paper on this which has been submitted to the SIAM Journal on Scientific Computing. PI Hans De Sterck has further developed his new optimization algorithm for canonical tensor approximation, formulating an extension in terms of steepest-descent preconditioning, which makes the approach generally applicable for nonlinear optimization. He has written a paper on this extension which has been submitted to Numerical Linear Algebra with Applications.

97 MATHEMATICS AND COMPUTING↗

Uncertainty propagation of p-boxes using sparse polynomial chaos expansions

In modern engineering, physical processes are modelled and analysed using advanced computer simulations, such as finite element models. Furthermore, concepts of reliability analysis and robust design are becoming popular, hence, making efficient quantification and propagation of uncertainties an important aspect. In this context, a typical workflow includes the characterization of the uncertainty in the input variables. In this paper, input variables are modelled by probability-boxes (p-boxes), accounting for both aleatory and epistemic uncertainty. The propagation of p-boxes leads to p-boxes of the output of the computational model. A two-level meta-modelling approach is proposed using non-intrusive sparse polynomial chaos expansions to surrogate the exact computational model and, hence, to facilitate the uncertainty quantification analysis. The capabilities of the proposed approach are illustrated through applications using a benchmark analytical function and two realistic engineering problem settings. They show that the proposed two-level approach allows for an accurate estimation of the statistics of the response quantity of interest using a small number of evaluations of the exact computational model. This is crucial in cases where the computational costs are dominated by the runs of high-fidelity computational models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characterizing and Mitigating Intraday Variability: Reconstructing Source Structure in Accreting Black Holes with mm-VLBI

The extraordinary physical resolution afforded by the Event Horizon Telescope has opened a window onto the astrophysical phenomena unfolding on horizon scales in two known black holes, M87* and Sgr A*. However, with this leap in resolution has come a new set of practical complications. Sgr A* exhibits intraday variability that violates the assumptions underlying Earth aperture synthesis, limiting traditional image reconstruction methods to short timescales and data sets with very sparse (u, v) coverage. We present a new set of tools to detect and mitigate this variability. We develop a data-driven, model-agnostic procedure to detect and characterize the spatial structure of intraday variability. This method is calibrated against a large set of mock data sets, producing an empirical estimator of the spatial power spectrum of the brightness fluctuations. We present a novel Bayesian noise modeling algorithm that simultaneously reconstructs an average image and statistical measure of the fluctuations about it using a parameterized form for the excess variance in the complex visibilities not otherwise explained by the statistical errors. These methods are validated using a variety of simulated data, including general relativistic magnetohydrodynamic simulations appropriate for Sgr A* and M87*. We find that the reconstructed source structure and variability are robust to changes in the underlying image model. We apply these methods to the 2017 EHT observations of M87*, finding evidence for variability across the EHT observing campaign. The variability mitigation strategies presented are widely applicable to very long baseline interferometry observations of variable sources generally, for which they provide a data-informed averaging procedure and natural characterization of inter-epoch image consistency.

79 ASTRONOMY AND ASTROPHYSICS↗

Cloud condensation nuclei concentrations derived from the CAMS reanalysis

Determining number concentrations of cloud condensation nuclei (CCN) is one of the first steps in the chain in analysis of cloud droplet formation, the direct microphysical link between aerosols and cloud droplets, and a process key for aerosol–cloud interactions (ACI). However, due to sparse coverage of in situ measurements and difficulties associated with retrievals from satellites, a global exploration of their magnitude, source as well as temporal and spatial distribution cannot be easily obtained. Thus, a better representation of CCN numbers is one of the goals for quantifying ACI processes and achieving uncertainty-reduced estimates of their associated radiative forcing. Here, we introduce a new CCN dataset which is derived based on aerosol mass mixing ratios from the latest Copernicus Atmosphere Monitoring Service reanalysis (CAMSRA) in a diagnostic model that uses CAMSRA aerosol properties and a simplified kappa-Köhler framework suitable for global models. The emitted aerosols in CAMSRA are not only based on input from emission inventories using aerosol observations, they also have a strong tie to satellite-retrieved aerosol optical depth (AOD) as this is assimilated as a constraining factor in the reanalysis. Furthermore, the reanalysis interpolates for cases of poor or missing retrievals and thus allows for a full spatiotemporal quantification of CCN numbers. The derived CCN dataset captures the general trend and spatial and temporal distribution of total CCN number concentrations and CCN from different aerosol species. A brief evaluation with ground-based in situ measurements demonstrates the improvement of the modelled CCN over the sole use of AOD as a proxy for CCN as the overall correlation coefficient improved from 0.37 to 0.71. However, we find the modelled CCN from CAMSRA to be generally high biased and find a particular erroneous overestimation at one heavily polluted site which emphasises the need for further validation. The CCN dataset (https://doi.org/10.26050/WDCC/QUAERERE_CCNCAMS_v1, Block, 2023), which is now freely available to users, features 3-D CCN number concentrations of global coverage for various supersaturations and aerosol species covering the years 2003–2021 with daily frequency. This dataset is one of its kind as it offers lots of opportunities to be used for evaluation in models and in ACI studies.

54 ENVIRONMENTAL SCIENCES↗

Efficient spares matrix multiplication scheme for the CYBER 203

This work has been directed toward the development of an efficient algorithm for performing this computation on the CYBER-203. The desire to provide software which gives the user the choice between the often conflicting goals of minimizing central processing (CPU) time or storage requirements has led to a diagonal-based algorithm in which one of three types of storage is selected for each diagonal. For each storage type, an initialization sub-routine estimates the CPU and storage requirements based upon results from previously performed numerical experimentation. These requirements are adjusted by weights provided by the user which reflect the relative importance the user places on the resources. The three storage types employed were chosen to be efficient on the CYBER-203 for diagonals which are sparse, moderately sparse, or dense; however, for many densities, no diagonal type is most efficient with respect to both resource requirements. The user-supplied weights dictate the choice.

Lambiotte, J. J., Jr.↗

Efficient Parametric Uncertainty Analysis of an Earth Entry Vehicle Concept Using Least Angle Regression

The objective of this work was to outline and apply an efficient and accurate parametric un-certainty propagation approach to the analysis of convective heating on an Earth entry vehicle concept. The described approach was based on Least Angle Regression used to solve a sparse and underdetermined linear system in the point-collocation non-intrusive polynomial chaos surrogate method. This approach involved an iterative process to computing the non-zero terms of the underlying polynomial chaos model using only enough samples to converge uncertainty interval predictions and Sobol index values based global nonlinear sensitivity estimates. The Earth entry vehicle was analyzed at three points along a representative trajectory for a Mars return mission. 329 sources of uncertainty were identified in the computational fluid dynamics model used to predict the forebody convective heating. These included uncertainty in flow field chemical rates, collision integrals, heats of formation, surface finite rate char model reaction rates, wall roughness height, and the turbulent Schmidt number. Results from this study showed that convective heating uncertainty as high as 50% of the nominal was predicted with only about 50 evaluations of the computational model. This was far fewer than would be required for a sampling-based approach or a full basis polynomial chaos model, which would have required over 50,000 samples. Additionally, results showed that over 90% of the total convective heating uncertainty was due to uncertainty in the N2catalytic rate on the surface, while the remainder of the uncertainty was attributed to the turbulent Schmidt number and the wall roughness uncertainties.

Thomas K West IV↗

Improved Sampling Algorithms in the Risk-Informed Safety Margin Characterization Toolkit

The RISMC approach is developing advanced set of methodologies and algorithms in order to perform Probabilistic Risk Analyses (PRAs). In contrast to classical PRA methods, which are based on Event-Tree and Fault-Tree methods, the RISMC approach largely employs system simulator codes applied to stochastic analysis tools. The basic idea is to randomly perturb (by employing sampling algorithms) timing and sequencing of events and internal parameters of the system codes (i.e., uncertain parameters) in order to estimate stochastic parameters such as core damage probability. This approach applied to complex systems such as nuclear power plants requires to perform a series of computationally expensive simulation runs given a large set of uncertain parameters. These types of analysis are affected by two issues. Firstly, the space of the possible solutions (a.k.a., the issue space or the response surface) can be sampled only very sparsely, and this precludes the ability to fully analyze the impact of uncertainties on the system dynamics. Secondly, large amounts of data are generated and tools to generate knowledge from such data sets are not yet available. This report focuses on the first issue and in particular employs novel methods that optimize the information generated by the sampling process by sampling unexplored and risk-significant regions of the issue space: adaptive (smart) sampling algorithms. They infer system response from surrogate models constructed from existing samples and predict the most relevant location of the next sample. It is therefore possible to understand features of the issue space with a small number of carefully selected samples. In this report, we will present how it is possible to perform adaptive sampling using the RISMC toolkit and highlight the advantages compared to more classical sampling approaches such Monte-Carlo. We will employ RAVEN to perform such statistical analyses using both analytical cases but also another RISMC code: RELAP-7.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DISCOVERY OF Hα EMISSION FROM THE CLOSE COMPANION INSIDE THE GAP OF TRANSITIONAL DISK HD 142527

We utilized the new high-order 585 actuator Magellan Adaptive Optics system (MagAO) to obtain very high-resolution visible light images of HD 142527 with MagAO's VisAO science camera. In the median seeing conditions of the 6.5 m Magellan telescope (0.''5–0.''7), we find MagAO delivers 24%-19% Strehl at Hα (0.656 μm). We detect a faint companion (HD 142527B) embedded in this young transitional disk system at just 86.3 ± 1.9 mas (∼12 AU) from the star. The companion is detected in both Hα and a continuum filter (Δmag = 6.33 ± 0.20 mag at Hα and 7.50 ± 0.25 mag in the continuum filter). This provides confirmation of the tentative companion discovered by Biller and co-workers with sparse aperture masking at the 8 m Very Large Telescope. The Hα emission from the ∼0.25 solar mass companion (EW = 180 Å) implies a mass accretion rate of ∼5.9 × 10{sup –10} M {sub sun} yr{sup –1} and a total accretion luminosity of 1.2% L {sub sun}. Assuming a similar accretion rate, we estimate that a 1 Jupiter mass gas giant could have considerably better (50-1000×) planet/star contrasts at Hα than at the H band (COND models) for a range of optical extinctions (3.4-0 mag). We suggest that ∼0.5-5 M {sub jup} extrasolar planets in their gas accretion phase could be much more luminous at Hα than in the NIR. This is the motivation for our new MagAO GAPplanetS survey for extrasolar planets.

79 ASTRONOMY AND ASTROPHYSICS↗

Convergence of Probability Densities Using Approximate Models for Forward and Inverse Problems in Uncertainty Quantification

Here, we analyze the convergence of probability density functions utilizing approximate models for both forward and inverse problems. We consider the standard forward uncertainty quantification problem where an assumed probability density on parameters is propagated through the approximate model to produce a probability density, often called a push-forward probability density, on a set of quantities of interest (QoI). The inverse problem considered in this paper seeks to update an initial probability density assumed on model input parameters such that the subsequent push-forward of this updated density through the parameter-to-QoI map matches a given probability density on the QoI. We prove that the densities obtained from solving the forward and inverse problems, using approximate models, converge to the true densities as the approximate models converge to the true models. Numerical results are presented to demonstrate convergence rates of densities for sparse grid approximations of parameter-to-QoI maps and standard spatial and temporal discretizations of PDEs and ODEs.

97 MATHEMATICS AND COMPUTING↗

Benchmarking the performance of uncertainty quantification methods for neural network-based interatomic potentials

Machine-learned interatomic potentials (ML-IAPs) continue to gain popularity as accurate, computationally efficient replacements for traditional, physics-based interatomic potentials and expensive ab initio methods. Uncertainty quantification (UQ) of ML-IAPs is a growing area of research as UQ is critical in many applications of IAPs, such as developing curated datasets, active learning-based data augmentation, self-improving models, and estimating the uncertainty of molecular dynamics simulations. In this paper, we construct and benchmark a series of different neural network potentials (NNPs) with varying network architectures to determine the performance of these models with respect to both the mean and uncertainty calibration error. Each NNP method is specifically designed to predict either epistemic or aleatoric uncertainty with particular focus on the differences in behavior between the epistemic and aleatoric uncertainty estimates. We benchmark these methods using multiple datasets common in the ML-IAP literature. The results show that the aleatoric uncertainty from single-shot model architectures is a competitive alternative to ensemble-based epistemic uncertainty predictions in regions of sufficient data-density. However, in regions where the representative data is sparse, aleatoric uncertainty models tend to overpredict and epistemic methods tend to underpredict the actual model error. We conclude that the type of UQ is crucial when discussing performance of probabilistic model results as different methods have different performance characteristics depending on the regime in which they are evaluated. Therefore, the type of UQ method should be carefully evaluated against both the data characteristics and requirements for the intended application.

97 MATHEMATICS AND COMPUTING↗

Random Variables with Moment-Matching Staircase Density Functions

This paper proposes a family of random variables for uncertainty modeling. The variables of interest have a bounded support set, and prescribed values for the first four moments. We present the feasibility conditions for the existence of any of such variables, and propose a class of variables that conforms to such constraints. This class is called staircase because the density of its members is a piecewise constant function. Convex optimization is used to calculate their distributions according to several optimality criteria, including maximal entropy and maximal log-likelihood. The flexibility and efficiency of staircases enable modeling phenomena having a possibly skewed and/or multimodal response at a low computational cost. Furthermore, we provide a means to account for the uncertainty in the distribution caused by estimating staircases from data. These ideas are illustrated by generating empirical staircase predictor models. We consider the case in which the predictor matches the sample moments exactly (a setting applicable to large datasets), as well as the case in which the predictor accounts for the sampling error in such moments (a setting applicable to sparse datasets). A predictor model for the dynamics of an aeroelastic airfoil subject to flutter instability is used as an example. The resulting predictor not only describes the system's response accurately, but also enables carrying out a risk analysis for safe flight.

Luis G. Crespo↗

Lessons from Earth Bioaerosol Sampling for Venus Habitability & Biosignature Science

Venus’s clouds are often discussed as a potential habitat. Several high-priority science goals – cloud aerosol composition, internal radiative flux, and aerosol residence time and circulation models – will improve our understanding of Venus in an astrobiology context. Lessons from Earth’s aerobiosphere can inform these requirements and interpretation of results. A stable Venus aerobiosphere would need microorganisms to reproduce faster than they settle out due to gravity. This is a joint constraint of the potential nutrients and energy influx, bioenergetic costs such as desiccation and radiation damage, and aerosol dynamics. Though life cycles involving S- and Fe-based redox metabolism have been proposed, at an optimistic estimate of 75% H2SO4, Venus aerosol water activity (aw) is still ~0.02, far below the observed microbial growth limit of ~0.6. Long-term desiccation with brief spurts of repair, growth and reproduction in response to transient water influx (perhaps volcanism) is the most likely model for Earth-like life on Venus – a ‘desert bloom’ scenario. In Earth’s troposphere, clouds can carry 103 – 105 cells/mL, some metabolically active. A better analogue may be Earth’s stratospheric sulfate aerosol layer: supercooled sulfuric acid aerosols (acid weight fraction 0.6 – 0.85, 0.1 – 1 µm diameter, 0.1 – 1 cm-3) with little water activity, long residence times, high UV radiation, and only sporadic influx from surface particle sources. Viable cells isolated from this region are rare (~102 cells/m3), though ‘hot spots’ at tropospheric mixing occur. Cells are primarily in inactive forms such as spores, and it is unclear if any are associated with sulfate aerosols or simply co-located. Given the heterogeneities in Venus clouds and the model of a sparse, largely dormant ecosystem, a single transect on descent would most likely pass through a low-water, inactive region, missing potential signs of habitability or biosignatures. Even a passive aerial platform (balloon) may end up following a single air mass over its lifetime. A better strategy for Venus would target an aerial region with some upwelling from surface sources, and take multiple transects separated in time and space. Earth’s stratospheric bioaerosol population could provide a starting point for estimating the required lower volume and detection limits.

Earth↗

Co-benefits of global and regional greenhouse gas mitigation for US air quality in 2050

Policies to mitigate greenhouse gas (GHG) emissions will not only slow climate change but can also have ancillary benefits of improved air quality. Here we examine the co-benefits of both global and regional GHG mitigation for US air quality in 2050 at fine resolution, using dynamical downscaling methods, building on a previous global co-benefits study (West et al., 2013). The co-benefits for US air quality are quantified via two mechanisms: through reductions in co-emitted air pollutants from the same sources and by slowing climate change and its influence on air quality, following West et al. (2013). Additionally, we separate the total co-benefits into contributions from domestic GHG mitigation vs. mitigation in foreign countries. We use the Weather Research and Forecasting (WRF) model to dynamically downscale future global climate to the regional scale and the Sparse Matrix Operator Kernel Emissions (SMOKE) program to directly process global anthropogenic emissions to the regional domain, and we provide dynamical boundary conditions from global simulations to the regional Community Multi-scale Air Quality (CMAQ) model. The total co-benefits of global GHG mitigation from the RCP4.5 scenario compared with its reference are estimated to be higher in the eastern US (ranging from 0.6 to 1.0 µg m -3 ) than the west (0–0.4 µg m -3 ) for fine particulate matter (PM 2.5 ), with an average of 0.47 µg m -3 over the US; for O 3 , the total co-benefits are more uniform at 2–5 ppb, with a US average of 3.55 ppb. Comparing the two mechanisms of co-benefits, we find that reductions in co-emitted air pollutants have a much greater influence on both PM 2.5 (96 % of the total co-benefits) and O 3 (89 % of the total) than the second co-benefits mechanism via slowing climate change, consistent with West et al. (2013). GHG mitigation from foreign countries contributes more to the US O 3 reduction (76 % of the total) than that from domestic GHG mitigation only (24 %), highlighting the importance of global methane reductions and the intercontinental transport of air pollutants. For PM 2.5 , the benefits of domestic GHG control are greater (74 % of total). Since foreign contributions to co-benefits can be substantial, with foreign O 3 benefits much larger than those from domestic reductions, previous studies that focus on local or regional co-benefits may greatly underestimate the total co-benefits of global GHG reductions. We conclude that the US can gain significantly greater domestic air quality co-benefits by engaging with other nations to control GHGs.

54 ENVIRONMENTAL SCIENCES↗

Evaluating an Automated Approach for Monitoring Forest Disturbances in the Pacific Northwest from Logging, Fire and Insect Outbreaks with Landsat Time Series Data

Forests are the largest aboveground sink for atmospheric carbon (C), and understanding how they change through time is critical to reduce our C-cycle uncertainties. We investigated a strong decline in Normalized Difference Vegetation Index (NDVI) from 1982 to 1991 in Pacific Northwest forests, observed with the National Ocean and Atmospheric Administration's (NOAA) series of Advanced Very High Resolution Radiometers (AVHRRs). To understand the causal factors of this decline, we evaluated an automated classification method developed for Landsat time series stacks (LTSS) to map forest change. This method included: (1) multiple disturbance index thresholds; and (2) a spectral trajectory-based image analysis with multiple confidence thresholds. We produced 48 maps and verified their accuracy with air photos, monitoring trends in burn severity data and insect aerial detection survey data. Area-based accuracy estimates for change in forest cover resulted in producer's and user's accuracies of 0.21 +/- 0.06 to 0.38 +/- 0.05 for insect disturbance, 0.23 +/- 0.07 to 1 +/- 0 for burned area and 0.74 +/- 0.03 to 0.76 +/- 0.03 for logging. We believe that accuracy was low for insect disturbance because air photo reference data were temporally sparse, hence missing some outbreaks, and the annual anniversary time step is not dense enough to track defoliation and progressive stand mortality. Producer's and user's accuracy for burned area was low due to the temporally abrupt nature of fire and harvest with a similar response of spectral indices between the disturbance index and normalized burn ratio. We conclude that the spectral trajectory approach also captures multi-year stress that could be caused by climate, acid deposition, pathogens, partial harvest, thinning, etc. Our study focused on understanding the transferability of previously successful methods to new ecosystems and found that this automated method does not perform with the same accuracy in Pacific Northwest forests. Using a robust accuracy assessment, we demonstrate the difficulty of transferring change attribution methods to other ecosystems, which has implications for the development of automated detection/attribution approaches. Widespread disturbance was found within AVHRR-negative anomalies, but identifying causal factors in LTSS with adequate mapping accuracy for fire and insects proved to be elusive. Our results provide a background framework for future studies to improve methods for the accuracy assessment of automated LTSS classifications.

Landsat↗