SEARCH · Engineering Papers

Results for “Solid Works”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

All sources NASA NTRS DOE OSTI

NASA NTRS2009

Investigating Liquid CO2 as a Coolant for a MTSA Heat Exchanger Design

Metabolic heat regenerated Temperature Swing Adsorption (MTSA) technology is being developed for thermal and carbon dioxide (CO 2) control for a future Portable Life Support System (PLSS), as well as water recycling. CO 2 removal and rejection is accomplished by driving a sorbent through a temperature swing of approximately 210 K to 280 K . The sorbent is cooled to these sub-freezing temperatures by a Sublimating Heat Exchanger (SHX) with liquid coolant expanded to sublimation temperatures. Water is the baseline coolant available on the moon, and if used, provides a competitive solution to the current baseline PLSS schematic. Liquid CO2 (LCO2) is another non-cryogenic coolant readily available from Martian resources which can be produced and stored using relatively low power and minimal infrastructure. LCO 2 expands from high pressure liquid (~5800 kPa) to Mars ambient (0.8 kPa) to produce a gas / solid mixture at temperatures as low as 156 K. Analysis and experimental work are presented to investigate factors that drive the design of a heat exchanger to effectively use this sink. Emphasis is given to enabling efficient use of the CO 2 cooling potential and mitigation of heat exchanger clogging due to solid formation. Minimizing mass and size as well as coolant delivery are also considered. The analysis and experimental work is specifically performed in an MTSA-like application to enable higher fidelity modeling for future optimization of a SHX design. In doing so, the work also demonstrates principles and concepts so that the design can be further optimized later in integrated applications (including Lunar application where water might be a choice of coolant).

Paul, Heather L.↗

DOE OSTI2025

Solid structure of Li 2 BeF 4 (FLiBe) from room temperature to melting studied by neutron and X-ray diffraction

Molten fluoride salts such as Li 2 BeF 4 (FLiBe) are used in molten salt reactors, fluoride-salt-cooled high-temperature reactors and fusion reactors as a fuel solvent, coolant and/or tritium breeding medium. In engineered systems that use molten salt, solid-state material will be present during melting and freezing scenarios, and therefore the temperature-dependent properties of the solid and solid/liquid phase transition merit investigation. To observe the behavior of the solid state of Li 2 BeF 4 from room temperature to melting, this work used neutron and X-ray diffraction to measure the changes in the lattice parameters and volume of the crystalline unit cell and compared the results with prior low-temperature data for solid Li 2 BeF 4 . From neutron diffraction data it is also possible to identify anisotropy: centimetre-scaled crystals align preferentially with the a axes parallel to the direction of freezing front propagation, and the c axes expand 54% more than the a axes. This work provides the lattice constants as a function of temperature, quantifies the thermal expansion, and determines the equation describing the change in density for solid Li 2 BeF 4 from room temperature to 459°C to be ρ solid (kg m −3 ) = 2182 (3) − 0.115 (2) T (°C) and the volume expansion upon melting to be less than 5%. This density changes depending on molecular weight and enrichment.

36 MATERIALS SCIENCE↗

NASA NTRS1991

Multi-dimensional modeling of a thermal energy storage canister

The Solar Dynamic Power Module being developed for Space Station Freedom uses a eutectic mixture of LiF-CaF2 phase change material (PCM) contained in toroidal canisters for thermal energy storage. Presented are the results from heat transfer analyses of a PCM containment canister. One and two dimensional finite difference computer models are developed to analyze heat transfer in the canister walls, PCM, void, and heat engine working fluid coolant. The modes of heat transfer considered include conduction in canister walls and solid PCM, conduction and pseudo-free convection in liquid PCM, conduction and radiation across PCM vapor filled void regions, and forced convection in the heat engine working fluid. Void shape, location, growth or shrinkage (due to density difference between the solid and liquid PCM phases) are prescribed based on engineering judgment. The PCM phase change process is analyzed using the enthalpy method. The discussion of the results focuses on how canister thermal performance is affected by free convection in the liquid PCM and void heat transfer. Characterizing these effects is important for interpreting the relationship between ground-based canister performance (in 1-g) and expected on-orbit performance (in micro-g). Void regions accentuate canister hot spots and temperature gradients due to their large thermal resistance. Free convection reduces the extent of PCM superheating and lowers canister temperatures during a portion of the PCM thermal charge period. Surprisingly small differences in canister thermal performance result from operation on the ground and operation on-orbit. This lack of a strong gravity dependency is attributed to the large contribution of container walls in overall canister energy redistribution by conduction.

Kerslake, Thomas W.↗

NASA NTRS2024

Residual Thrust in a Solid Rocket Motor: A Model Applied to the Mars Ascent Vehicle

A model for solid rocket motor residual thrust is built from the concept that hot nozzle phenolic or carbon materials provide a radiating source of heat flux to the insulation, leading to continued off-gassing by pyrolysis. This model is 1. Fitted to flight datasets and scaled to the Mars Ascent Vehicle second stage motor (MAV SRM2), and 2. Derived with MAV SRM2 design and material estimates. The two methods show a potential range of modeling uncertainty for use by mission analysts. Further loss methods that could reduce the maximum residual impulse are identified but left to further work to evaluate.

Solid rocket motors↗

NASA NTRSDate not supplied

Residual Thrust in a Solid Rocket Motor: A Model Applied to the Mars Ascent Vehicle

Solid rocket motors↗

DOE OSTI2026

Stable Co-valorization of Carbon Dioxide and Methane via Dynamic Reconstruction of a Metal Oxide Solid Solution Catalyst

Dry reforming of methane (DRM) is a process that converts two greenhouse gases (methane and carbon dioxide) into syngas, a mixture of H 2 and CO, that can lead to a variety of value-added chemicals. Owing to its endothermic nature, high reaction temperatures up to 800 °C are typically required and the grand challenge lies in developing robust catalysts without sintering and coking-induced deactivation during the long-term on-stream operation. Towards this aim, herein, a robust complex oxide-supported NiCu alloy catalyst was generated in situ during DRM. By leveraging the configurational stability of a solid oxide solution precursor, tightly anchored NiCu bimetallic nanoparticles were in situ exsoluted and acted as the active sites in DRM. The as-afforded catalyst exhibited stable performance for DRM due to the ability to repel coke off the surface as the reaction proceeds. Kinetic experiments along with top surface characterization detail the reconstruction behavior of the solid oxide solution under DRM reaction conditions. In conclusion, the fundamental insights from this work provide guidance on generating resistant and flexible catalysts via in situ active sites formation from easily synthesized metal oxide solid solutions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2026

Effects of He-Ion Radiation on Solid-State Uranyl Nitrate Compounds under Dry and Hydrated Atmospheric Conditions

Radioactive decay of uranium (U) and its related daughter/fission products emit ionizing radiation, including γ (γ) rays and α (α) particles, that result in the formation of radical species and induce chemical reactivity in materials. While radioactivity is inherent to the chemistry of U there are limited studies that detail changes at an atomistic level. Here, this work describes the He-ion radiolysis of four solid-state U(VI) species: [UO 2 (NO 3 ) 2 ]·3(H 2 O) and M[UO 2 (NO 3 ) 3 ] (M = K + , Rb + , Cs + ). These materials were irradiated under different conditions (i.e. closed, open – Ar gas, or open – H 2 O-saturated Ar gas) to further evaluate the impact of water radiolysis on the chemical modification of these materials. Pre- and post-irradiation analyses were conducted using EPR, Raman, and ATR-IR spectroscopy on materials irradiated to 0, 5, 10, and 25 MGy. The results indicated the presence of nitrate radical (NO 3 • ) formation in all solid-state materials with similarities to those observed in γ-radiation studies. Irradiation of [UO 2 (NO 3 ) 2 ]·3(H 2 O) did not show evidence of reactive oxygen species bound to the U(VI) cation under inert conditions; however, surface reactivity was observed for samples irradiated in the H 2 O-saturated environment. Similar chemical changes were observed in the uranyl trinitrato compounds irradiated in the presence of H 2 O vapor and there were observed differences in the reactivity depending on the identity of the alkali cation.

38 - RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCL↗

DOE OSTI2025

Effect of Propagating Dopant Reactivity on Lattice Oxygen Loss in LLZO Solid Electrolyte Contacted with Lithium Metal

Lithium lanthanum zirconium oxide (LLZO) is widely known as the most stable solid electrolyte against lithium metal electrodes. This thermodynamic stability can be lost by the presence of dopants which are required to stabilize the cubic phase of LLZO and can be reduced by lithium metal. However, the role of oxygen in such reactions is taken for granted. In this work, the reduction of Nb-substituted LLZO (Nb-LLZO) is explored by Li metal and shows that interfacial reactions propagate and lead to the decomposition with substantial Nb 5+ reduction deep into the bulk electrolyte. Scanning Transmission Electron Microscopy with Energy Dispersive X-ray Spectroscopy and thermogravimetric analyses show much of the reduction is due to oxygen vacancies formed, leading to increased electronic conductivity mapped with conductive Atomic Force Microscopy. Density functional theory calculations indicate oxygen release is favored by increased excess lithiation of Nb-LLZO. Electrochemical impedance of polycrystalline Nb-LLZO shows the continuous evolution of ionically resistive interphases near the lithium metal interface with Nb-LLZO while single crystals show little reactivity at room temperature and self-limiting reduction at 60°C. This work underlines the role of grain boundaries in propagating destructive solid electrolyte reactions and highlights previously unseen mechanisms involving lattice oxygen in LLZO.

Li metal, solid-state electrolytes↗

DOE OSTI2020

Nonuniform Ionic and Electronic Transport of Ceramic and Polymer/Ceramic Hybrid Electrolyte by Nanometer-Scale Operando Imaging for Solid-State Battery

Replacing the liquid electrolyte in lithium batteries with solid-state ion conductor is promising for next-generation energy storage that is safe and has high energy density. In this work, nanometer-resolution ionic and electronic transport imaging of Li 3 PS 4 (LPS), a solid-state electrolyte (SSE), is reported. This nm resolution is achieved by using a logarithm-scale current amplifier that enhances the current sensitivity to the fA range. Large fluctuations of ion current—one to two orders of magnitude on the LPS and on the LPS region of a polymer/LPS bulk hybrid SSE—that must be mitigated to eliminate Li dendrite formation and growth, are found. This ion current fluctuation is understood in terms of highly anisotropic transport kinetic barriers along the different crystalline axes due to different grain orientations in the polycrystalline and glass ceramic materials. The results on the bulk hybrid SSE show a sharp transition of ionic and electronic transport at the LPS/polymer boundary and decreases in average ionic current with decreasing polyimine particle size and with extensive cycling. The results elucidate the mechanism of polyimine extension into interparticles to prevent Li dendrite growth. This work opens up novel characterization of charge transport, which relates to Li plating and stripping for solid-state-batteries.

Li3PS4↗

NASA NTRS1961

Friction, Wear, and Evaporation Rates of Various Materials in Vacuum to 10(exp -7) mm Hg

The requirements for bearings and seals to operate in the environment of space dictate a new area for lubrication research. The low ambient pressures encountered in space can be expected to influence the behavior of oil, grease, and solid-film lubricants. The property of these materials most significantly affected by low ambient pressures is the evaporation rate. Various investigators have therefore measured the evaporation rates of oils and greases in vacuum as one method of establishing their relative merit for space applications (1-3). The results of this work have given some indication as to the oils and greases with the greatest stability at reduced ambient pressures. Only limited experimental work, however, has been reported in the literature for inorganic solids and soft metals which have potential use as solid lubricant films or coatings for hard alloy substrates [e.g. Reference ( 4 )]. In general, the evaporation rates of these materials would be lower than those of oils and greases. These films might therefore be very attractive as lubricants for high vacuum service.

Buckley, Donald H.↗

DOE OSTI2021

A Bi-Layer Dense/Porous Solid Electrolyte Interphase for Enhanced Lithium-Metal Stability

Due to its high theoretical capacity and low electrochemical potential, lithium metal is a highly investigated anode for next-generation high-energy batteries. However, the unstable chemical and topographical heterogeneous surface of lithium gives rise to safety and efficiency concerns that prevent it from being utilized in practical applications. Exposure to electrolyte leads to non-uniform, mixed organic-inorganic solid-electrolyte interphase (SEI) formation, starting a cascading to non-uniform flux distribution, consumption of active materials, and dendrite growth. The SEI is the key feature that will lead to harnessing the capabilities possible with lithium metal. In this work, the formation of a closed-host bi-layer solid electrolyte interphase (SEI) improves the stability of lithium anode. This is successfully realized by forming an interconnected porous LiF-rich artificial SEI in contact with Li metal, and a dense, stable in-situ formed upper layer SEI. The porous layer increases the number of Li/LiF interfaces, which reduces local volume fluctuations and improves Li+ diffusion along these interfaces. Additionally, the tortuous porous structure guides uniform Li+ flux distribution and mechanically suppresses dendrite propagation. The dense upper layer of the SEI accomplishes a closed-host design through reaction with LiNO3 additive and prevents continuous consumption of active materials seen without the additive included in the electrolyte. The duality of a dense top layer with porous bottom layer led to extended cycle life and improved rate performance, evidenced with symmetric cell testing, as well as full cell testing paired with sulfur and LiFePO4 (LFP) cathodes. This work is a good example of a rational design of the SEI, based on comprehensive consideration of various critical factors to improve Li-metal anode stability, and highlights a new pathway to improve cycling and rate performances of Li metal batteries.

25 ENERGY STORAGE↗

DOE OSTI2024

In-House Developed Multiphysics Simulation for the Performance of Solid Oxide Cells (SOCs)

Reversible solid oxide cells(rSOCs) are an enabling energy storage/production technology for a dynamic grid environment. Reversible operation requires strong working knowledge of fuel cell (SOFC) and electrolyzer (SOEC). Performance degradation of SOECs has been observed; however, the details of physical processes related to the performance degradation remain unknown. Multiphysics simulations were performed to investigate the performance degradation of solid oxide electrolysis cells under various working conditions.

Yang, Tao↗

DOE OSTI2022

Spin-triplet superconductivity from excitonic effect in doped insulators

Despite being of fundamental importance and potential interest for topological quantum computing, spin-triplet superconductors remain rare in solid state materials after decades of research. In this work, we present a three-particle mechanism for spin-triplet superconductivity in multiband systems, where an effective attraction between doped electrons is produced from the Coulomb repulsion via a virtual interband transition involving a third electron [V. Crépel, L. Fu, Sci. Adv. 7, eabh2233 (2021)]. Our theory is analytically controlled by an interband hybridization parameter and explicitly demonstrated in doped band insulators with the example of an extended Hubbard model. Our theory of exciton-mediated pairing reveals how, as a matter of principle, a two-particle bound state can arise from the strong electron repulsion upon doping, opening a viable path to Bose–Einstein condensate (BEC)–Bardeen–Cooper–Schrieffer (BCS) physics in solid state systems. In light of this theory, we propose that recently discovered dilute superconductors such as ZrNCl, WTe 2 , and moiré materials can be spin-triplet and compare the expected consequences of our theory with experimental data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2023

Design, Manufacture, and Testing of an Open-Source Benchmark Composite Hydrokinetic Turbine Blade: Preprint

In a trend toward clean energy alternatives, recent years have seen great strides in the marine energy space. Consequently, there is a pressing need for the design, development, and validation of novel energy harvesting technologies such as hydrokinetic devices, which capture kinetic energy from waves, tides, and currents. However, these devices span numerous concepts and designs that often lack solid benchmark research that can be freely referenced throughout their development. This work focuses on the design process of an open-source composite hydrokinetic turbine blade for a three-bladed marine turbine rotor assembly with a diameter of 2.5 m. The proposed blade consists of two structural composite skins that are bonded with an adhesive and filled with a foam core. This study also explores and contrasts the efficiency and resolution of low-fidelity rapid design methodologies and comprehensive high-fidelity approaches in the context of blade design, modeling, and analysis efforts, a key objective in this research. Blade hydrodynamic loads were modeled and applied to finite-element blade models to study deformations and potential failure. Ongoing and upcoming efforts will result in blade manufacture and structural testing at the National Renewable Energy Laboratory. In future work, multiple blades will be deployed at the Living Bridge site at the University of New Hampshire and will be compared to rigid aluminum blades of the same geometry, developed by Sandia National Laboratories. Ultimately, this research will lay foundational groundwork for researchers and manufacturers, establishing a baseline composite blade design that will serve as a benchmark in the development of future hydrokinetic turbine blades.

blade design↗

DOE OSTI2024

Cyber-Physical Simulation of the Cold Startup of Solid Oxide Fuel Cell – Gas Turbine (SOFC-GT) Hybrid Systems

This work introduces experimental studies for the cold startup process (CPS) of the SOFC-GT hybrid system using the cyber-physical simulation approach. The physical gas turbine is coupled with a cyber-physical SOFC stack, which is represented using the integration of a real time dynamic SOFC model with physical components (e.g., pressure chamber, natural gas burner, etc.). Different ramp rates of the turbine speed were tested out during the startup processes. Bypass valves were also used to manipulate the airflow during SOFC-GT hybrid system start-up process. Different ramp rates enable the rapid start-up of the turbine to avoid surge and stall, meanwhile enable acceptable warm rate of the fuel cell stack without damaging the cell material. CPS can enable dynamic characterizations of highly integrated systems at lower cost.

Zhou, Nana↗

NASA NTRS1997

Development of State of the Art Solid State Lasers for Altimetry and other LIDAR Applications

This report describes work performed and research accomplished through the end of 1997. During this time period, we have designed and fabricated two lasers for flight LIDAR applications to medium altitudes (Laser Vegetation Imaging System designs LVIS 1 and LVIS 2), designed one earth orbiting LIDAR transmitter (VCL-Alt), and continued work on a high rep-rate LIDAR laser (Raster Scanned Altimeter, RASCAL). Additionally, a 'White Paper' was prepared which evaluates the current state of the art of Nd:YAG lasers and projects efficiencies to the year 2004. This report is attached as Appendix 1 of this report.

Kay, Richard B.↗

DOE OSTI2022

Unique W-Shape Y6 isomer as effective solid additive for High-Performance PM6:Y6 polymer solar cells

The current top-performing polymer solar cell (PSC) systems are mostly based on PM6:Y6 host blend. To date, numerous materials have been explored as the third component for these systems to form ternary blends or as additives. Vitrification agents are a group of additives proved to be useful in affecting the morphology of organic semiconductors. Here to design a suitable vitrification agent for non-fullerene electron acceptor Y6, an isomer strategy was explored where the thienothiophene wings of the Y6 molecule were inversed to form a W-shaped Y6 isomer of i-Y6. It was found that i-Y6 crystallized poorly with a different packing style than Y6 and could blend well in amorphous phase of Y6. These properties enabled i-Y6 to finely tune the morphology of PM6:Y6 blend at low additive dosages. The power conversion efficiency (PCE) of PM6:Y6 based PSC was raised from 16.827% to 17.433% at a dosage of Y6:i-Y6 ratio of 24:1. This work demonstrated isomerization as a viable strategy for developing solid additives for high performance PSC blends and vitrification agents as effective additives for tuning morphology and improving performances of PSCs.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Proof-of-concept of a neutron time-of-flight ellipsoidal detector

The time-resolved measurement of neutrons emitted from nuclear implosions at inertial confinement fusion facilities is used to characterize the fusing plasma. Several significant quantities are routinely measured by neutron time-of-flight (nToF) detectors in these experiments. Current nToF detectors use scintillators as well as solid-state Cherenkov radiators. The latter has an inherently faster time response and can provide a co-registered γ-ray measurement as well as improved precision in the bulk hot-spot velocity. This work discusses a nToF ellipsoidal detector that also utilizes a solid-state Cherenkov radiator. The detector has the potential to achieve a fast instrument response function allowing for characterization of the γ-ray burn history as well as the ability to field the detector closer to the fusion source. Proof-of-concept testing of the nToF ellipsoidal detector has been conducted at the National Ignition Facility using commercial optics. A time-resolved neutron signal has been measured from the diagnostic. Preliminary simulations corroborate the results.

Jeet, J. (ORCID:0000000291091563)↗