Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solar coronagraph”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

591 records · Page 33

INTERCHANGE RECONNECTION FORCED BY THE FILAMENT ERUPTION INSIDE A PSEUDO-STREAMER

We present rare observational signatures of interchange reconnection (IR) forced by the filament eruption inside a pseudo-streamer (PS). The PS was centered above a positive-polarity region bounded by two negative-polarity coronal holes (CHs), and thus its base contained two polarity inversion lines and a pair of loop arcades where two filaments were harbored. In white-light coronagraph data from two different views, it showed up as a fan-shaped structure consisting of fine rays and a coronal streamer. Followed by a two-ribbon flare and a coronal mass ejection, one of the filaments and its overlying arcade erupted away from the nearby CH and flew over the other arcade to interact with the PS's remote CH. As a result, distinct ribbon-like remote brightenings formed along the remote CH boundary and were connected to the positive-polarity flare ribbon by a loop system, but the nearby open-field region largely remained unchanged except that compact brightenings and a following small coronal dimming appeared close to one end of the erupted filament. In combination with the coronal magnetic configuration that derived from the potential-field source-surface model, these observations can be interpreted as follows: the erupting field was first deflected and guided by the nearby CH's open field and then reconnected with the oppositely oriented open field of the remote CH, during which both the closed field bridging the erupted filament and the remoter CH's open field were transported in the opposite direction. The observations thus supported the idea that PSs provide favorable environments for IR to take place and remote brightenings along their CH boundaries represent a credible IR signature on the solar surface.

79 ASTRONOMY AND ASTROPHYSICS↗

DISTRIBUTION OF PLASMOIDS IN POST-CORONAL MASS EJECTION CURRENT SHEETS

Recently, the fragmentation of a current sheet in the high-Lundquist-number regime caused by the plasmoid instability has been proposed as a possible mechanism for fast reconnection. In this work, we investigate this scenario by comparing the distribution of plasmoids obtained from Large Angle and Spectrometric Coronagraph (LASCO) observational data of a coronal mass ejection event with a resistive magnetohydrodynamic simulation of a similar event. The LASCO/C2 data are analyzed using visual inspection, whereas the numerical data are analyzed using both visual inspection and a more precise topological method. Contrasting the observational data with numerical data analyzed with both methods, we identify a major limitation of the visual inspection method, due to the difficulty in resolving smaller plasmoids. This result raises questions about reports of log-normal distributions of plasmoids and other coherent features in the recent literature. Based on nonlinear scaling relations of the plasmoid instability, we infer a lower bound on the current sheet width, assuming the underlying mechanism of current sheet broadening is resistive diffusion.

79 ASTRONOMY AND ASTROPHYSICS↗

The 0.5-2.22 micrometer Scattered Light Spectrum of the Disk around TW Hya: Detection of a Partially Filled Disk Gap at 80 AU*

We present a 0.5-2.2 micrometer scattered light spectrum of the circumstellar disk around TW Hya from a combination of spatially resolved Hubble Space Telescope STIS spectroscopy and NICMOS coronagraphic images of the disk. We investigate the morphology of the disk at distances greater than 40 AU over this wide range of wavelengths, and identify the presence of a depression in surface brightness at approximately 80 AU that could be caused by a gap in the disk. Additionally, we quantify the surface brightness, azimuthal symmetry, and spectral character of the disk as a function of radius. Our analysis shows that the scattering efficiency of the dust is largely neutral to blue over the observed wavelengths. We model the disk as a steady α-disk with an ad hoc gap structure. The thermal properties of the disk are selfconsistently calculated using a three-dimensional radiative transfer code that uses ray tracing to model the heating of the disk interior and scattered light images. We find a good fit to the data over a wide range of distances from the star if we use a model disk with a partially filled gap of 30% depth at 80 AU and with a self-similar truncation knee at 100 AU. The origin of the gap is unclear, but it could arise from a transition in the nature of the disk's dust composition or the presence of a planetary companion. Based on scalings to previous hydrodynamic simulations of gap-opening criteria for embedded proto-planets, we estimate that a planetary companion forming the gap could have a mass between 6 and 28 solar mass.

radiative transfer↗

IMPLEMENTATION OF THE GRADUATED CYLINDRICAL SHELL MODEL FOR THE THREE-DIMENSIONAL RECONSTRUCTION OF CORONAL MASS EJECTIONS

The graduated cylindrical shell (GCS) model developed by Thernisien et al. has been used with the goal of studying the three-dimensional morphology, position, and kinematics of coronal mass ejections observed by coronagraphs. These studies focused more on the results rather than the details of the model itself. As more researchers begin to use the model, it becomes necessary to provide a deeper discussion on how it is derived, which is the purpose of this paper. The model is built using the following features and constraints: (1) the legs are conical, (2) the front is pseudo-circular, (3) the cross section is circular, and (4) it expands in a self-similar way. We derive the equation of the model from these constraints. We also show that the ice-cream cone model is a limit of the GCS when the two legs overlap completely. Finally, we provide formulae for the calculation of various geometrical dimensions, such as angular width and aspect ratio, as well as the pseudo-code that is used for its computer implementation.

79 ASTRONOMY AND ASTROPHYSICS↗

Theoretical Reflectance Spectra of Earth-like Planets through Their Evolutions: Impact of Clouds on the Detectability of Oxygen, Water, and Methane with Future Direct Imaging Missions

In the near-future, atmospheric characterization of Earth-like planets in the habitable zone will become possible via reflectance spectroscopy with future telescopes such as the proposed LUVOIR and HabEx missions. While previous studies have considered the effect of clouds on the reflectance spectra of Earth-like planets, the molecular detectability considering a wide range of cloud properties has not been previously explored in detail. In this study, we explore the effect of cloud altitude and coverage on the reflectance spectra of Earth-like planets at different geological epochs and examine the detectability of O{sub 2},H{sub 2}O, and CH{sub 4} with test parameters for the future mission concept, LUVOIR, using a coronagraph noise simulator previously designed for WFIRST-AFTA. Considering an Earth-like planet located at 5 pc away, we have found that for the proposed LUVOIR telescope, the detection of the O{sub 2} A-band feature (0.76 μm) will take approximately 100, 30, and 10 hr for the majority of the cloud parameter space modeled for the atmospheres with 10%, 50%, and 100% of modern Earth O{sub 2} abundances, respectively. In particular, for the case of ≳50% of modern Earth O{sub 2} abundance, the feature will be detectable with an integration time ≲10 hr as long as there are lower-altitude (≲8 km) clouds with a global coverage of ≳20%. For the 1% of the modern Earth O{sub 2} abundance case, however, it will take more than 100 hr for all the cloud parameters we modeled.

79 ASTRONOMY AND ASTROPHYSICS↗

PLASMOID RELEASES IN THE HELIOSPHERIC CURRENT SHEET AND ASSOCIATED CORONAL HOLE BOUNDARY LAYER EVOLUTION

As the heliospheric current sheet (HCS) is corotating past STEREO-B, near-Earth spacecraft ACE, Wind and Cluster, and STEREO-A over more than three days between 2008 January 10 and 14, we observe various sections of (near-pressure-balanced) flux-rope- and magnetic-island-type plasmoids in the associated heliospheric plasma sheet (HPS). The plasmoids can qualify as slow interplanetary coronal mass ejections and are relatively low proton beta (<0.5) structures, with small length scales (an order of magnitude lower than typical magnetic cloud values) and low magnetic field strengths (2-8 nT). One of them, in particular, detected at STEREO-B, corresponds to the first reported evidence of a detached plasmoid in the HPS. The in situ signatures near Earth are associated with a long-decay X-ray flare and a slow small-scale streamer ejecta, observed remotely with white-light coronagraphs aboard STEREO-B and SOHO and tracked by triangulation. Before the arrival of the HPS, a coronal hole boundary layer (CHBL) is detected in situ. The multi-spacecraft observations indicate a CHBL stream corotating with the HCS but with a decreasing speed distribution suggestive of a localized or transient nature. While we may reasonably assume that an interaction between ejecta and CHBL provides the source of momentum for the slow ejecta's acceleration, the outstanding composition properties of the CHBL near Earth provide here circumstantial evidence that this interaction or possibly an earlier one, taking place during streamer swelling when the ejecta rises slowly, results in additional mixing processes.

79 ASTRONOMY AND ASTROPHYSICS↗

Origin of the Sheared Magnetic Fields that Erupt in Flares and Coronal Mass Ejections

From a search of the Yohkoh/SXT whole-Sun movie in the years 2000 and 2001, we found 37 flare-arcade events for which there were full-disk magnetograms from SOHO/MDI, coronagraph movies from SOHO/LASCO, and before and after full-disk chromospheric images from SOHOBIT and/or from ground-based observatories. For each event, the observations show or strongly imply that the flare arcade was produced in the usual way by the eruption of sheared core field (as a flux rope) from along the neutral line inside a mature bipolar magnetic arcade. Two-thirds (25) of these arcades had the normal leading-trailing magnetic polarity arrangement of the active regions in the hemisphere of the arcade, but the other third (12) had reversed polarity, their leading flux being the trailing-polarity remnant of one or more old active regions and their trailing flux being the leading-polarity remnant of one or more other old active regions. From these observations, we conclude: (1) The sheared core field in a reversed-polarity arcade must be formed by processes in and above the photosphere, not by the emergence of a twisted flux rope bodily from below the photosphere. (2) The sheared core fields in the normal-polarity arcades were basically the same as those in the reversed-polarity arcades: both showed similar sigmoidal form and produced similar explosions (similar flares and CMEs). (3) Hence, the sheared core fields in normal-polarity mature arcades are likely formed mainly by the same processes as in reversed-polarity arcades. (4) These processes should be discernible in high-resolution magnetogram sequences and movies of the photosphere, chromosphere, and corona such those to come from Solar-B

Moore, Ronald L.↗

ERUPTING FILAMENTS WITH LARGE ENCLOSING FLUX TUBES AS SOURCES OF HIGH-MASS THREE-PART CMEs, AND ERUPTING FILAMENTS IN THE ABSENCE OF ENCLOSING FLUX TUBES AS SOURCES OF LOW-MASS UNSTRUCTURED CMEs

The 3-part appearance of many coronal mass ejections (CMEs) arising from erupting filaments emerges from a large magnetic flux tube structure, consistent with the form of the erupting filament system. Other CMEs arising from erupting filaments lack a clear 3-part structure and reasons for this have not been researched in detail. This paper aims to further establish the link between CME structure and the structure of the erupting filament system and to investigate whether CMEs which lack a 3-part structure have different eruption characteristics. A survey is made of 221 near-limb filament eruptions observed from 2013 May 03 to 2014 June 30 by Extreme UltraViolet (EUV) imagers and coronagraphs. Ninety-two filament eruptions are associated with 3-part structured CMEs, 41 eruptions are associated with unstructured CMEs. The remaining 88 are categorized as failed eruptions. For 34% of the 3-part CMEs, processing applied to EUV images reveals the erupting front edge is a pre-existing loop structure surrounding the filament, which subsequently erupts with the filament to form the leading bright front edge of the CME. This connection is confirmed by a flux-rope density model. Furthermore, the unstructured CMEs have a narrower distribution of mass compared to structured CMEs, with total mass comparable to the mass of 3-part CME cores. This study supports the interpretation of 3-part CME leading fronts as the outer boundaries of a large pre-existing flux tube. Unstructured (non 3-part) CMEs are a different family to structured CMEs, arising from the eruption of filaments which are compact flux tubes in the absence of a large system of enclosing closed field.

79 ASTRONOMY AND ASTROPHYSICS↗

CMEs FROM AR 10365: MORPHOLOGY AND PHYSICAL PARAMETERS OF THE EJECTIONS AND OF THE ASSOCIATED CURRENT SHEET

We study the evolution and physical parameters of three consecutive coronal mass ejections (CMEs) that occurred at the west limb of the Sun on 2003 June 2 at 00:30, 08:54, 16:08 UT, respectively. The Large Angle and Spectrometric Coronagraph Experiment (LASCO) CME catalog shows that the CMEs entered the C2 field of view with position angles within a 5 deg. interval. This suggests a common origin for the ejections, to be identified with the magnetic system associated with the active region that lies below the CMEs. The close proximity in time and source location of the events prompted us to analyze LASCO white light data and Ultraviolet Coronagraph Spectrometer (UVCS) spectra with the aim of identifying similarities and differences among the three CMEs. It turns out that two of them display the typical three-part structure, while no conclusion can be drawn about the morphology of the third ejection. The CMEs plasma is 'cool', i.e., electron temperatures in the CMEs front are of the order of 2 x 10{sup 5} K, with no significant variation between different events. However, ejection speeds vary by a factor of approx1.5 between consecutive events and electron densities (more precisely emission measures) by a factor of approx6 between the first CME and the second and third CMEs. In the aftermath of all events, we found evidence of current sheets (CSs) both in LASCO and UVCS. We give here the CS physical parameters (electron temperature, density, and kinetic temperature) and follow, in one of the events, their temporal evolution over a 6 hr time interval. A discussion of our results, in the framework of previous findings, concludes the paper.

79 ASTRONOMY AND ASTROPHYSICS↗

THERMAL STRUCTURE OF CORONAL LOOPS AS SEEN WITH NORIKURA CORONAGRAPH

The thermal structure of a coronal loop, both along and across the loop, is vital in determining the exact plasma heating mechanism. High-resolution spectroscopic observations of the off-limb corona were made using the 25 cm Norikura coronagraph, located at Norikura, Japan. Observations on a number of days were made simultaneously in four forbidden iron emission lines, namely, the [Fe XI] 7892 A line, the [Fe XIII] 10747 A and 10798 A lines, and the [Fe XIV] 5303 A line and on some days made only in the [Fe XI] 7892 A and [Fe X] 6374 A lines. Using temperature sensitive emission line ratios [Fe XIV] 5303 A/[Fe XIII] 10747 A and [Fe XI] 7892 A/[Fe X] 6374 A, we compute the electron temperatures along 18 different loop structures observed on different days. We find a significant negative temperature gradient in all of the structures observed in Fe XIV and Fe XIII and a positive temperature gradient in the structures observed in Fe XI and Fe X. Combining these results with the previous investigations by Singh and his collaborators, we infer that the loop tops, in general, appear hotter when observed in colder lines and colder when observed in relatively hotter lines as compared to their coronal foot points. We suggest that this contrasting trend observed in the temperature variation along the loop structures can be explained by a gradual interaction of different temperature plasma. The exact mechanism responsible for this interaction must be investigated further and has the potential to constrain loop heating models.

79 ASTRONOMY AND ASTROPHYSICS↗

ACCELERATION OF CORONAL MASS EJECTIONS FROM THREE-DIMENSIONAL RECONSTRUCTION OF STEREO IMAGES

We employ a three-dimensional (3D) reconstruction technique for the first time to study the kinematics of six coronal mass ejections (CMEs), using images obtained from the COR1 and COR2 coronagraphs on board the twin STEREO spacecraft, and also the eruptive prominences (EPs) associated with three of them using images from the Extreme UltraViolet Imager. A feature in the EPs and leading edges (LEs) of all the CMEs was identified and tracked in images from the two spacecraft, and a stereoscopic reconstruction technique was used to determine the 3D coordinates of these features. True velocity and acceleration were determined from the temporal evolution of the true height of the CME features. Our study of the kinematics of the CMEs in 3D reveals that the CME LE undergoes maximum acceleration typically below 2 R{sub sun}. The acceleration profiles of CMEs associated with flares and prominences exhibit different behaviors. While the CMEs not associated with prominences show a bimodal acceleration profile, those associated with prominences do not. Two of the three associated prominences in the study show a high and increasing value of acceleration up to a distance of almost 4 R{sub sun}, but acceleration of the corresponding CME LE does not show the same behavior, suggesting that the two may not be always driven by the same mechanism. One of the CMEs, although associated with a C-class flare, showed unusually high acceleration of over 1500 m s{sup -2}. Our results therefore suggest that only the flare-associated CMEs undergo residual acceleration, which indicates that the flux injection theoretical model holds well for the flare-associated CMEs, but a different mechanism should be considered for EP-associated CMEs.

79 ASTRONOMY AND ASTROPHYSICS↗

GRADUAL INFLATION OF ACTIVE-REGION CORONAL ARCADES BUILDING UP TO CORONAL MASS EJECTIONS

The pre-coronal mass ejection (pre-CME) structure is of great importance to understanding the origin of CMEs, which, however, has been largely unknown for CMEs originating from active regions. In this paper, we investigate this issue using the wavelet-enhanced EUV Imaging Telescope (EIT) observations combined with the Large Angle and Spectrometric Coronagraph, Michelson Doppler Imager, and GOES soft X-ray observations. Selected for studying are 16 active-region coronal arcades whose gradual inflation lead up to CMEs. Twelve of them clearly build upon post-eruptive arcades resulting from a preceding eruption; the remaining four are located high in the corona in the first place and/or have existed for days. The observed inflation lasts for 8.7 {+-} 4.1 hr, with the arcade rising from 1.15 {+-} 0.06 R{sub sun} to 1.36 {+-} 0.07 R{sub sun} within the EIT field of view (FOV). The rising speed is less than 5 km s{sup -1} most of the time. Only at the end of this quasi-static stage does it increase to tens of kilometers per second over tens of minutes. The arcade then erupts out of the EIT FOV as a CME with similar morphology. This pre-CME structure is apparently unaffected by the flares occurring during its quasi-static inflation phase, but is closely coupled with the flare occurring during its acceleration phase. For four events that are observed on the disk, it is found that the gradual inflation of the arcade is accompanied by significant helicity injection from the photosphere. In particular, a swirling structure, which is reminiscent of a magnetic flux rope, was observed in one of the arcades over 4 hr prior to the subsequent CME, and the growth of the arcade is associated with the injection of helicity of opposite sign into the active region via flux emergence. We propose a four-phase evolution paradigm for the observed CMEs, i.e., a quasi-static inflation phase which corresponds to the buildup of magnetic free energy in the corona, followed by the frequently observed three-phase paradigm, including an initial phase, an acceleration phase, and a gradual phase.

79 ASTRONOMY AND ASTROPHYSICS↗

SIDE MAGNETIC RECONNECTIONS INDUCED BY CORONAL MASS EJECTIONS: OBSERVATIONS AND SIMULATIONS

Over the last few years coronagraphic and spectroscopic observations have demonstrated that small-scale eruptions, such as 'jets', 'narrow coronal mass ejections (CMEs)', 'mini CMEs', 'streamer puffs', 'streamer detachments', and others, occur ubiquitously on the Sun. Nevertheless, the origin of small-scale eruptive events and how these are interrelated with larger scale CMEs have been poorly investigated so far. In this work, we study a series of small-scale side eruptions that occurred during and after a large-scale CME. Observations show that a CME can be associated not only with a single reconnection process, leading to the large-scale phenomenon, but also with many other side reconnections occurring at different locations and times around the main flux rope, possibly induced by the CME expansion in the surrounding corona. White light and EUV observations of a slow CME acquired by the SOHO/LASCO and SOHO/UVCS instruments are analyzed here to characterize the locations of side reconnections induced by the CME. The magnetic reconnection rate M has been estimated from the UVCS data from the ratio between the inflows and outflows observed around the reconnection region, and from the LASCO data from the observed aperture angles between the slow mode shocks (SMSs) associated with the reconnection. It turns out that M {approx_equal} 0.05 at the heliocentric distance of 1.8 R{sub sun}, while between {approx}2.5 and 5.5 R{sub sun}, M values progressively decrease with time/altitude from M {approx} 1 down to M {approx} 0.3. Such large values of M are theoretically acceptable only if flux pile-up reconnection is envisaged. The observed occurrence of multiple reconnections associated with a CME is verified by numerical simulations of an eruption occurring within multiple helmet streamers. The simulations confirm that small side reconnections are a consequence of CME expansion against the surrounding coronal streamers. The simulated and observed evolution of aperture angles between the SMSs are in good agreement as well. These results demonstrate the effect of the global coronal magnetic field in the occurrence of small-scale eruptions due to lateral reconnection in a preceding CME event.

30 DIRECT ENERGY CONVERSION↗

Quantifying Errors in 3D CME Parameters Derived from Synthetic Data Using White-Light Reconstruction Techniques

Current efforts in space weather forecasting of CMEs have been focused on predicting their arrival time and magnetic structure. To make these predictions, methods have been developed to derive the true CME speed, size, position, and mass, among others. Difficulties in determining the input parameters for CME forecasting models arise from the lack of direct measurements of the coronal magnetic fields and uncertainties in estimating the CME 3D geometric and kinematic parameters after eruption. White-light coronagraph images are usually employed by a variety of CME reconstruction techniques that assume more or less complex geometries. This is the first study from our International Space Science Institute (ISSI) team “Understanding Our Capabilities in Observing and Modeling Coronal Mass Ejections”, in which we explore how subjectivity affects the 3D CME parameters that are obtained from the Graduated Cylindrical Shell (GCS) reconstruction technique, which is widely used in CME research. To be able to quantify such uncertainties, the “true” values that are being fitted should be known, which are impossible to derive from observational data. We have designed two different synthetic scenarios where the “true” geometric parameters are known in order to quantify such uncertainties for the first time. We explore this by using two sets of synthetic data: 1) Using the ray-tracing option from the GCS model software itself, and 2) Using 3D magnetohydrodynamic (MHD) simulation data from the Magnetohydrodynamic Algorithm outside a Sphere code. Our experiment includes different viewing configurations using single and multiple viewpoints. CME reconstructions using a single viewpoint had the largest errors and error ranges overall for both synthetic GCS and simulated MHD white-light data. As the number of viewpoints increased from one to two, the errors decreased by approximately 4° in latitude, 22° in longitude, 14° in tilt, and 10° in half-angle. Our results quantitatively show the critical need for at least two viewpoints to be able to reduce the uncertainty in deriving CME parameters. We did not find a significant decrease in errors when going from two to three viewpoints for our specific hypothetical three spacecraft scenario using synthetic GCS white-light data. As we expected, considering all configurations and numbers of viewpoints, the mean absolute errors in the measured CME parameters are generally significantly higher in the case of the simulated MHD white-light data compared to those from the synthetic white-light images generated by the GCS model. We found the following CME parameter error bars as a starting point for quantifying the minimum error in CME parameters from white-light reconstructions: Δθ (latitude)=6° +2° -3° , Δϕ (longitude)=11° +18° -6° , Δγ (tilt)=25° +8° -7° , Δx (half-angle)=10° +12° -6° , Δh (height)=0.6 +1.2 -0.4 R ⨀ , and Δκ (ratio)=0.1 +0.03 -0.02 .

Coronal mass ejections↗

Quantifying Errors in 3D CME Parameters Derived From Synthetic Data Using White-Light Reconstruction Techniques

Current efforts in space weather forecasting of CMEs have been focused on predicting their arrival time and magnetic structure. To make these predictions, methods have been developed to derive the true CME speed, size, position, and mass, among others. Difficulties in determining the input parameters for CME forecasting models arise from the lack of direct measurements of the coronal magnetic fields and uncertainties in estimating the CME 3D geometric and kinematic parameters after eruption. White-light coronagraph images are usually employed by a variety of CME reconstruction techniques that assume more or less complex geometries. This is the first study from our International Space Science Institute (ISSI) team “Understanding Our Capabilities in Observing and Modeling Coronal Mass Ejections”, in which we explore how subjectivity affects the 3D CME parameters that are obtained from the Graduated Cylindrical Shell (GCS) reconstruction technique, which is widely used in CME research. To be able to quantify such uncertainties, the “true” values that are being fitted should be known, which are impossible to derive from observational data. We have designed two different synthetic scenarios where the “true” geometric parameters are known in order to quantify such uncertainties for the first time. We explore this by using two sets of synthetic data: 1) Using the ray-tracing option from the GCS model software itself, and 2) Using 3D magnetohydrodynamic (MHD) simulation data from the Magnetohydrodynamic Algorithm outside a Sphere code. Our experiment includes different viewing configurations using single and multiple viewpoints. CME reconstructions using a single viewpoint had the largest errors and error ranges overall for both synthetic GCS and simulated MHD white-light data. As the number of viewpoints increased from one to two, the errors decreased by approximately 4° in latitude, 22° in longitude, 14° in tilt, and 10° in half-angle. Our results quantitatively show the critical need for at least two viewpoints to be able to reduce the uncertainty in deriving CME parameters. We did not find a significant decrease in errors when going from two to three viewpoints for our specific hypothetical three spacecraft scenario using synthetic GCS white-light data. As we expected, considering all configurations and numbers of viewpoints, the mean absolute errors in the measured CME parameters are generally significantly higher in the case of the simulated MHD white-light data compared to those from the synthetic white-light images generated by the GCS model. We found the following CME parameter error bars as a starting point for quantifying the minimum error in CME parameters from white-light reconstructions: Δθ (latitude)=6° +2° -3° , Δϕ (longitude)=11° +18° -6° , Δγ (tilt)=25° +8° -7° , Δx (half-angle)=10° +12° -6° , Δh (height)=0.6 +1.2 -0.4 R ⨀ , and Δκ (ratio)=0.1 +0.03 -0.02 .

Coronal mass ejections↗