Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Single Crystal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Single-crystal investigation of the proposed type-II Weyl semimetal CeAlGe

We present details of materials synthesis, crystal structure, and anisotropic magnetic properties of single crystals of CeAlGe, a proposed type-II Weyl semimetal. Single-crystal x-ray diffraction confirms that CeAlGe forms in a noncentrosymmetric I4 1 md space group, in line with predictions of nontrivial topology. Magnetization, specific heat, and electrical transport measurements were used to confirm antiferromagnetic order below 5 K, with an estimated magnon excitation gap of Δ = 9.11 K from heat capacity and hole-like carrier density of 1.4 × 10 20 cm –3 from Hall effect measurements. The easy magnetic axis is along the [100] crystallographic direction, indicating that the moment lies in the tetragonal ab plane below 7 K. A spin-flop transition to less than 1 μ B /Ce is observed to occur below 30 kOe at 1.8 K in the M(H) (H ∥ a) data. Furthermore, small magnetic fields of 3 and 30 kOe are sufficient to suppress magnetic order when applied along the a and c axes, respectively, resulting in a complex T–H phase diagram for H ∥ a and a simpler one for H ∥ c.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A pathway to synthesizing single-crystal Fe and FeCr films

Nuclear reactor environments provide a unique scientific and engineering challenge wherein materials must tolerate prolonged exposure to concurrent irradiation, elevated temperatures, and corrosive media. However, uncontrolled variability in material composition and structure often prohibits truly single-variable experiments that can reveal basic aspects of environmental damage. Here, Magnetron sputtering is used to provide a more controlled model system for these fundamental studies, yielding reproducible single-crystal Fe and FeCr thin films containing 8 and 18 at.% Cr. Electron microscopy is used to determine the systematic correlations between growth conditions and the resulting film microstructure and surface morphology. It is found that the substrate temperature and applied radio frequency (RF) bias can be tuned to obtain consistent homogeneous and single crystal films with a minimal amount of Ar impurities from the RF bias process. Epitaxial, single-crystal Fe films are obtained on MgO substrates at 500 °C with 10 Watt (W) RF bias deposition. However, when Cr is alloyed with Fe, higher substrate temperatures (600 °C) and applied RF biases (15 W) are required to achieve a similar epitaxial single-crystal FeCr film. Accelerated molecular dynamics simulations reveal that Cr impedes surface transport, explaining the need for higher temperature and bias during the growth of the Cr-bearing films.

36 MATERIALS SCIENCE↗

Continuous single crystal growth of graphene

Systems and methods for synthesizing continuous single crystal graphene are provided. A catalytic substrate is drawn through a chemical vapor deposition chamber in a first lengthwise direction while flowing a hydrogen gas through the chemical vapor deposition chamber in the same lengthwise direction. A hydrocarbon precursor gas is supplied directly above a surface of the catalytic substrate. A high concentration gradient of the hydrocarbon precursor at the crystal growth front is generated to promote the growth of a continuous single crystal graphene film while suppressing the growth of seed domains ahead of the crystal growth front.

36 MATERIALS SCIENCE↗

Structural Characterization of Doped GaSb Single Crystals by X-ray Topography

We characterized GaSb single crystals containing different dopants (Al, Cd and Te), grown by the Czochralski method, by x-ray topography and high angular resolution x-ray diffraction. Lang topography revealed dislocations parallel and perpendicular to the crystal's surface. Double-crystal GaSb 333 x-ray topography shows dislocations and vertical stripes than can be associated with circular growth bands. We compared our high-angular resolution x-ray diffraction measurements (rocking curves) with the findings predicted by the dynamical theory of x-ray diffraction. These measurements show that our GaSb single crystals have a relative variation in the lattice parameter ({Delta}d/d) on the order of 10{sup -5}. This means that they can be used as electronic devices (detectors, for example) and as x-ray monochromators.

43 PARTICLE ACCELERATORS↗

Crystallographic and magnetic properties of (Cu{sub 1-x}V{sub x})V{sub 2}S{sub 4} (x{approx}0.3) single crystals with the layered defect NiAs structure synthesized under high pressure

We report on the reproducible growth of (Cu{sub 1-x}V{sub x})V{sub 2}S{sub 4} single crystals of sizable dimensions ({approx}0.3 mm) and homogeneous composition (x{approx}0.3) by means of high-pressure synthesis. The refinement of single crystal X-ray diffraction data indicates that the crystal structure is of the monoclinic defect NiAs-type, which consists of a stacking of VS{sub 2} layers with CdI{sub 2}-type structure and chains of edge-sharing (Cu{sub 1-x}V{sub x})S{sub 6} octahedra. Layers and chains form a network of face-sharing octahedra with no Cu-V intra-chain ordering. A combined X-ray photoelectron spectroscopy and bond valence sum analysis indicates that the valence of the V and Cu ions are 3+ and 1+, respectively. Magnetic susceptibility measurements unveil the coexistence of a large Pauli-like and of a small Curie-like paramagnetic contributions, with no evidence of any long range order down to 2 K. This result suggests a picture of predominantly itinerant 3d V electrons with significant electron-electron correlations. - Graphical Abstract: Crystallographic structure of (Cu{sub 0.69}V{sub 0.31})V{sub 2}S{sub 4}. For clarity, the octahedral environment of (Cu{sub 0.69}V{sub 0.31}) site is not shown. Highlights: > Synthesis of new single-crystals in the Cu-V-S system using high pressure and high temperature. > Structural analysis revealed the single-crystals to be of the defect NiAs-type structure. > Bond valence sum analysis combined to X-ray photoemission spectroscopy revealed Cu{sup 1+} and a majority of V{sup 3+}. > Magnetic susceptibility has been measured. > Charge carriers are of two types, localized and itinerant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrical properties of In{sub 2}Se{sub 3} single crystals and photosensitivity of Al/In{sub 2}Se{sub 3} Schottky barriers

In{sub 2}Se{sub 3} single crystals {approx}40 mm long and 14 mm in diameter were grown by the Bridgman method. The composition of grown single crystals and their crystal structure were determined. The conductivity ({sigma}) and Hall constant (R) of grown single crystals were measured and the first Schottky barriers Al/n-In{sub 2}Se{sub 3} were fabricated. Rectification and photovoltaic effect were detected in the new structures. Based on the study of the photosensitivity spectra of Al/n-In{sub 2}Se{sub 3} structures, the nature of the interband transitions and band gap of In{sub 2}Se{sub 3} crystals were determined. It was concluded that the new structures can be applied to develop broadband photoconverters of optical radiation.

36 MATERIALS SCIENCE↗

Structural and Phase Transformations in Superlocalization Band in Ni{sub 3}Ge Single Crystal

The paper studies the high-temperature plastic deformation in Ni{sub 3}Ge alloy single crystals localizing in a band a few tens of microns wide that reaches the shear strain of thousands of percent. The electron backscatter diffraction and synchrotron radiation techniques allow investigating the structure of the single crystal in the band of super-localized plastic deformation. It is shown that super-localization of plastic deformation occurs due to the formation of polycrystalline multi-level substructure in the initial single crystal. The grain size and grain misorientation bimodal distributions are determined in the polycrystalline substructure. Also, regions of amorphous state are observed in the super-localization band at high homologous temperature Т > 0.5T{sub m}. A partial destruction of the far atomic order is detected.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A perspective on single-crystal layered oxide cathodes for lithium-ion batteries

As the demand for lithium-ion batteries grows exponentially to feed the nascent electric-vehicle and grid-storage markets, the need for higher energy density and longer cycle life becomes more apparent. Increasing the nickel content in the layered-oxide cathodes has been a dominant strategy to increase energy density, but this has exacerbated the surface reactivity concerns. Furthermore, the high states of charge associated with increased capacity lead to cracking of the polycrystalline cathode particles, which exposes fresh surfaces and accelerates capacity fade. Single-crystal cathode particles with low susceptibility to cracking have recently taken on intense interest due to their remarkable cyclability. Many different approaches to single-crystal synthesis have been explored, but there has been no systematic analysis of the different techniques to date. Additionally, many reports have taken on a trial-and-error approach, ignoring well established literature on grain growth outside the battery field. This perspective reviews the literature on single-crystal cathode synthesis through the lens of classic grain growth theories, providing insight and hopefully accelerating the adoption of the promising single-crystal cathode morphology.

25 ENERGY STORAGE↗

Anisotropic constitutive modeling for nickel-base single crystal superalloys

An anisotropic constitutive model was developed based on crystallographic slip theory for nickel base single crystal superalloys. The constitutive equations developed utilizes drag stress and back stress state variables to model the local inelastic flow. Specially designed experiments were conducted to evaluate the existence of back stress in single crystal superalloy Rene N4 at 982 C. The results suggest that: (1) the back stress is orientation dependent; and (2) the back stress state variable is required for the current model to predict material anelastic recovery behavior. The model was evaluated for its predictive capability on single crystal material behavior including orientation dependent stress-strain response, tension/compression asymmetry, strain rate sensitivity, anelastic recovery behavior, cyclic hardening and softening, stress relaxation, creep and associated crystal lattice rotation. Limitation and future development needs are discussed.

Sheh, Michael Y.↗

Effect of annealing ambient on anisotropic retraction of film edges during solid-state dewetting of thin single crystal films

During solid-state dewetting of thin single crystal films, film edges retract at a rate that is strongly dependent on their crystallographic orientations. Edges with kinetically stable in-plane orientations remain straight as they retract, while those with other in-plane orientations develop in-plane facets as they retract. Kinetically stable edges have retraction rates that are lower than edges with other orientations and thus determine the shape of the natural holes that form during solid-state dewetting. In this paper, measurements of the retraction rates of kinetically stable edges for single crystal (110) and (100) Ni films on MgO are presented. Relative retraction rates of kinetically stable edges with different crystallographic orientations are observed to change under different annealing conditions, and this accordingly changes the initial shapes of growing holes. The surfaces of (110) and (100) films were also characterized using low energy electron diffraction, and different surface reconstructions were observed under different ambient conditions. The observed surface structures were found to correlate with the observed changes in the relative retraction rates of the kinetically stable edges.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Application of single crystal superalloys for Earth-to-orbit propulsion systems

Single crystal superalloys were first identified as potentially useful engineering materials for aircraft gas turbine engines in the mid-1960's. Although they were not introduced into service as turbine blades in commercial aircraft engines until the early 1980's, they have subsequently accumulated tens of millions of flight hours in revenue producing service. The space shuttle main engine (SSME) and potential advanced earth-to-orbit propulsion systems impose severe conditions on turbopump turbine blades which for some potential failure modes are more severe than in aircraft gas turbines. Research activities which are directed at evaluating the potential for single crystal superalloys for application as turbopump turbine blades in the SSME and advanced rocket engines are discussed. The mechanical properties of these alloys are summarized and the effects of hydrogen are noted. The use of high gradient directional solidification and hot isostatic pressing to improve fatigue properties is also addressed.

Dreshfield, R. L.↗

Application of single crystal superalloys for earth-to-orbit propulsion systems

Single crystal superalloys were first identified as potentially useful engineering materials for aircraft gas turbine engines in the mid-1960s. Although they were not introduced into service as turbine blades in commercial aircraft engines until the early 1980's, they have subsequently accumulated tens of millions of flight hours in revenue producing service. The Space Shuttle main engine (SSME) and potential advanced earth-to-orbit propulsion systems impose severe conditions on turbopump turbine blades which for some potential failure modes are more severe than in aircraft gas turbines. Research activities which are directed at evaluating the potential for single crystal superalloys for application as turbopump turbine blades in the SSME and advanced rocket engines are discussed. The mechanical properties of these alloys are summarized and the effects of hydrogen are noted. The use of high gradient directional solidification and hot isostatic pressing to improve fatigue properties is also addressed.

Dreshfield, R. L.↗

Orientation dependent spall strength of tantalum single crystals

We report that it is generally recognized that single crystals exhibit orientation-dependent elastic and plastic responses. However, it is less known how the dynamic tensile, or spall, strength depends on crystalline orientation, especially for BCC materials. It has been previously shown that the dynamic tensile strength of FCC materials is highly dependent on their plastic response under compression, with a direct correlation between plastic deformation and spall strength. In BCC materials like Ta, where the primary deformation mechanism at high strain rates is a combination of slip and twinning, the quantitative dependence of spall strength on these deformation mechanisms is less understood. To fill this gap in our knowledge, a series of non-equilibrium molecular dynamics simulations are completed for six tantalum single crystal orientations: <001>, <011>, <111>, <013>, <112>, <149>, to explore the role of directional anisotropy on ductile spallation. Our results show that due to the role of non-Schmid and release effects in BCC Ta, the evolution of plasticity follows a complex trajectory through shock compression, release, and tension. Orientations that contain residual twinning deformation have a reduced spall strength proportional to the amount of twinning present. Lastly, twins and their intersections function as regions of increased stress localization within the system due to compatibility requirements and their interactions with dislocations.

36 MATERIALS SCIENCE↗

Effect of tensile mean stress on fatigue behavior of single-crystal and directionally solidified superalloys

Two nickel base superalloys, single crystal PWA 1480 and directionally solidified MAR-M 246 + Hf, were studied in view of the potential usage of the former and usage of the latter as blade materials for the turbomachinery of the Space Shuttle main engine. The baseline zero mean stress (ZMS) fatigue life (FL) behavior of these superalloys was established, and then the effect of tensile mean stress (TMS) on their FL behavior was characterized. A stress range based FL prediction approach was used to characterize both the ZMS and TMS fatigue data. In the past, several researchers have developed methods to account for the detrimental effect of tensile mean stress on the FL for polycrystalline engineering alloys. These methods were applied to characterize the TMS fatigue data of single crystal PWA 1480 and directionally solidified MAR-M 246 + Hf and were found to be unsatisfactory. Therefore, a method of accounting for the TMS effect on FL, that is based on a technique proposed by Heidmann and Manson was developed to characterize the TMS fatigue data of these superalloys. Details of this method and its relationship to the conventionally used mean stress methods in FL prediction are discussed.

Kalluri, Sreeramesh↗

Growth and characterization of nonlinear optical telluromolybdate CoTeMoO{sub 6} single crystals

Nonlinear optical (NLO) crystals CoTeMoO{sub 6} have been grown from high temperature solution by means of spontaneous crystallization. These crystals have been characterized by temperature-dependent X-ray diffraction, infrared and electron absorption methods. Moreover, polarized Raman spectra have been measured at room temperature. These studies showed that the Mo{sup 6+} and Te{sup 4+} ions are in asymmetric coordination environment, and CoTeMoO{sub 6} has the largest flexibility index among MTeMoO{sub 6} family of telluro-molybdates (M=Zn, Mg, Cd, Mn, Co), making this compound attractive NLO material. Raman and IR studies allowed assigning the observed modes to respective motions of atoms in the unit cell. They have also showed evidence for spin–phonon coupling at low temperatures and suggested that CoTeMoO{sub 6} is prospective material for solid-state Raman laser-frequency converters. Analysis of electron absorption data has shown that Co{sup 2+} ions are located in sites of weak crystal field with the crystal field parameters Dq and B equal to 548 cm{sup −1} and 882 cm{sup −1}, respectively. - Graphical abstract: View of CoTeMoO{sub 6} crystal structure along the b-axis. - Highlights: • Single crystals of nonlinear optical telluromolybdate CoTeMoO{sub 6} were grown. • Crystal structure was solved by means of single crystal X-ray diffraction. • Raman and IR spectra were measured and analyzed. • Crystal field strength acting on Co{sup 2+} ions was established from analysis of electron absorption spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical signatures of photoinduced Zn vacancies in ZnO single crystal

193-nm excimer laser interaction with ZnO single-crystal at 0.05–500 KW/cm{sup 2} intensities is investigated under ultra high vacuum conditions by time resolved photoluminescence (PL) spectroscopy. A dominant 3.18 eV PL emission band at 295 K is observed. This band shows unusually long 0.52 ± 0.01 μs lifetime, indicating a defect mediated emission mechanism. The demonstrated negative thermal quenching for this band confirms its free electron to acceptor type transition. The involved acceptor is attributed to zinc vacancy with ∼100 meV shallow acceptor state. This study finds that 193-nm interactions produce Zn vacancies in transient states at 0.05–50 KW/cm{sup 2} excitation intensities and in stable state at 500 KW/cm{sup 2} or above intensities. The transient zinc vacancy production at such low intensities further validates the Frenkel pair creation as mechanism for creating these defects in ZnO single-crystal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗