SEARCH · Engineering Papers

Results for “Simplified Simulator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Effective parameterization of phase-field models of fission gas bubble growth

Fission gas bubbles are one of the most important microstructural features of ceramic nuclear fuels. As gas bubbles grow and interconnect, they allow release of gases, with important consequences for fuel performance. Phase-field modeling has been increasingly used to simulate the evolution of fission gas bubble microstructural because of its capability to capture complex microstructural features. However, computational performance limitations have made it difficult to simulate all the defects present in fuels during operation. For this reason, phase-field models have often simulated only vacancies and used multiple approaches to include the effect of vacancy-interstitial recombination and sinks in a simplified way. Here, we compare some of the most prevalent approaches, including source-only and source/sink. The kinetics of bubble growth using these approaches are analyzed analytically, and simulations with these approaches are compared to a full vacancy-interstitial model.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

NASA NTRS1976

MHD solution of interplanetary disturbances generated by simulated velocity perturbations

An MHD time-dependent numerical simulation, restricted to the solar equatorial plane, is used to demonstrate the interplanetary disturbances caused by several simplified coronal holes. Each 'hole' is assumed to have a configuration such that the higher solar wind velocity produced within their longitudinal extent is Gaussian over a 7-day period at the inner boundary (0.3 AU) of the numerical simulation. A second, twin coronal hole is assumed to rotate on the solar disk behind its predecessor. It is shown that the first coronal hole-produced interplanetary shock ensemble is overtaken by the second ensemble because of the higher velocity, lower density environment into which the latter propagates. A number of features predicted by MHD similarity theory are confirmed by the numerical simulation. These features include (1) strong azimuthal magnetic and plasma density compression, accompanied with average temperature depression, at the contact surface between forward and reverse shock ensembles, and (2) increasing spatial separation distance between forward and reverse shocks.

Dryer, M.↗

NASA NTRS1996

Computational considerations for the simulation of shock-induced sound

The numerical study of aeroacoustic problems places stringent demands on the choice of a computational algorithm, because it requires the ability to propagate disturbances of small amplitude and short wavelength. The demands are particularly high when shock waves are involved, because the chosen algorithm must also resolve discontinuities in the solution. The extent to which a high-order-accurate shock-capturing method can be relied upon for aeroacoustics applications that involve the interaction of shocks with other waves has not been previously quantified. Such a study is initiated in this work. A fourth-order-accurate essentially nonoscillatory (ENO) method is used to investigate the solutions of inviscid, compressible flows with shocks in a quasi-one-dimensional nozzle flow. The design order of accuracy is achieved in the smooth regions of a steady-state test case. However, in an unsteady test case, only first-order results are obtained downstream of a sound-shock interaction. The difficulty in obtaining a globally high-order-accurate solution in such a case with a shock-capturing method is demonstrated through the study of a simplified, linear model problem. Some of the difficult issues and ramifications for aeroacoustics simulations of flows with shocks that are raised by these results are discussed.

Casper, Jay↗

NASA NTRS2010

A Simplified Model for Detonation Based Pressure-Gain Combustors

A time-dependent model is presented which simulates the essential physics of a detonative or otherwise constant volume, pressure-gain combustor for gas turbine applications. The model utilizes simple, global thermodynamic relations to determine an assumed instantaneous and uniform post-combustion state in one of many envisioned tubes comprising the device. A simple, second order, non-upwinding computational fluid dynamic algorithm is then used to compute the (continuous) flowfield properties during the blowdown and refill stages of the periodic cycle which each tube undergoes. The exhausted flow is averaged to provide mixed total pressure and enthalpy which may be used as a cycle performance metric for benefits analysis. The simplicity of the model allows for nearly instantaneous results when implemented on a personal computer. The results compare favorably with higher resolution numerical codes which are more difficult to configure, and more time consuming to operate.

Paxson, Daniel E.↗

DOE OSTI2020

Framework for Large-scale Implementation of Wholesale-Retail Transactive Control Mechanism

Transactive energy is a control technique that uses market mechanisms to achieve desired control objectives. Several simulation studies and field demonstrations were carried out in recent years, but all focused on small scale systems and purpose-built simplified models which are not always capable of pointing out all the advantages and shortcomings of transac- tive energy methods. This work describes a co-simulation framework built on a hierarchical control architecture that allows for conducting studies of the impacts of a very large-scale deployment of transactive energy. The hierarchical transactive control architecture adopted in this work helps with alleviating computation and communication burden to facilitate a more effective large scale real-time market operation among device level resources and the system level operators. The co-simulation framework is evaluated an integrated power sys- tem model of unprecedented scale composed of the Western Electricity Coordination Council (WECC) transmission system with tens of thousands of distribution systems deployed with flexible device-level distributed energy resources (DERs) using off-the-shelf simulators.

Transactive energy, market-based controls, DER int↗

DOE OSTI2021

Disentangling the Effects of Vapor Pressure Deficit and Soil Water Availability on Canopy Conductance in a Seasonal Tropical Forest During the 2015 El Niño Drought

In land models used in Earth system models, vegetation water stress is heuristically related to soil water matric potential, and root water uptake in soil layers is simply proportional to root density to meet the transpiration demand. The efficiency of roots utilizing deeper soil water under water stress cannot be well represented, but it is of critical importance for transpiration regulation and carbon flux. To improve modeling of tropical forest response to drought, a plant hydrodynamic scheme (HYDRO), adapted from a trait-based model in the Functionally Assembled Terrestrial Ecosystem Simulator (FATES), has been implemented in the Energy Exascale Earth System Model (E3SM) Land Model (ELM) to represent the hydraulic dynamics and root water uptake strategy. The adapted model conforms to the big-leaf photosynthesis model in ELM. Vegetation water stress in the model is a function of prognostic leaf water potential and is used to regulate stomatal conductance. Point simulations were performed at two tropical forest sites in the Amazon and Panama. Model sensitivity to the numerical solver, plant hydraulic traits, soil properties, and atmospheric forcing has been evaluated. Our results showed that, even though water stress factors calculated at our study sites using HYDRO are comparable to that simulated by the heuristic water stress model, soil moisture prediction is improved with soil water redistributions through roots. Simulated results using HYDRO is not as sensitive to plant hydraulic traits measured for different tree species as to the soil properties and atmospheric forcing. Simplified numerical solver may cause inaccuracy as to where roots uptake water. This study suggests that plant hydrodynamic representation is critical for improved simulations of soil moisture under water stresses.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Tropical Cirrus in Global Storm-Resolving Models. Part II: Cirrus Life Cycle and Top-of-Atmosphere Radiative Fluxes

Cirrus clouds of various thicknesses and radiative characteristics extend over much of the tropics, especially around deep convection. They are difficult to observe due to their high altitude and sometimes small optical depths. They are also difficult to simulate in conventional global climate models, which have coarse grid spacings and simplified parameterizations of deep convection and cirrus formation. We investigate the representation of tropical cirrus in global storm-resolving models (GSRMs), which have higher spatial resolution and explicit convection and could more accurately represent cirrus cloud processes. This study uses GSRMs from the DYnamics of the Atmospheric general circulation Modeled On Non-hydrostatic Domains (DYAMOND) project. The aggregate life cycle of tropical cirrus is analyzed using joint albedo and outgoing longwave radiation (OLR) histograms to assess the fidelity of models in capturing the observed cirrus cloud populations over representative tropical ocean and land regions. The proportions of optically-thick deep convection, anvils, and cirrus vary across models and are portrayed in the vertical distribution of cloud cover and top-of-atmosphere radiative fluxes. Model differences in cirrus populations, likely driven by subgrid processes such as ice microphysics, dominate over regional differences between convectively-active tropical land and ocean locations.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Turbulent dynamo action and its effects on the mixing at the convective boundary of an idealized oxygen-burning shell

Convection is one of the most important mixing processes in stellar interiors. Hydrodynamic mass entrainment can bring fresh fuel from neighboring stable layers into a convection zone, modifying the structure and evolution of the star. Because flows in stellar convection zones are highly turbulent, multidimensional hydrodynamic simulations are fundamental to accurately capture the physics of mixing processes. Under some conditions, strong magnetic fields can be sustained by the action of a turbulent dynamo, adding another layer of complexity and possibly altering the dynamics in the convection zone and at its boundaries. In this study, we used our fully compressible S EVEN -L EAGUE H YDRO code to run detailed and highly resolved three-dimensional magnetohydrodynamic simulations of turbulent convection, dynamo amplification, and convective boundary mixing in a simplified setup whose stratification is similar to that of an oxygen-burning shell in a star with an initial mass of 25 M ⊙ . We find that the random stretching of magnetic field lines by fluid motions in the inertial range of the turbulent spectrum (i.e., a small-scale dynamo) naturally amplifies the seed field by several orders of magnitude in a few convective turnover timescales. During the subsequent saturated regime, the magnetic-to-kinetic energy ratio inside the convective shell reaches values as high as 0.33, and the average magnetic field strength is ∼10 10 G. Such strong fields efficiently suppress shear instabilities, which feed the turbulent cascade of kinetic energy, on a wide range of spatial scales. The resulting convective flows are characterized by thread-like structures that extend over a large fraction of the convective shell. The reduced flow speeds and the presence of magnetic fields with strengths up to 60% of the equipartition value at the upper convective boundary diminish the rate of mass entrainment from the stable layer by ≈20% as compared to the purely hydrodynamic case.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2020

Circuit Modelling of the Mechanical-Motion-Rectifier for Electrical Simulation of Ocean Wave Power Take-off

As is the case with several other mechanical power takeoffs (PTOs), the mechanical-motion-rectifier (MMR) based PTO consists of components such as one-way clutches, gears, a ball screw, mechanical couplings, and a generator. Equivalent circuit models have been created in this paper to describe the dry frictions, viscous damping, and mechanical compliances in these components, so the non-ideal efficiency and nonlinear force of the PTO can be predicted in electrical simulations by integrating these sub-circuit models. The circuit model is simplified, and its parameters are categorized as dc and ac unknowns. The dc and ac tests on the PTO are performed sequentially to extract two sets of parameters through linear regression or nonlinear curve fitting. Then, the model is validated through its prediction capability over 25 test conditions on input forces, output voltages, and efficiencies, with correlation coefficients of 0.9, 0.98, and 0.981, respectively.

42 ENGINEERING↗

DOE OSTI2025

Metallurgical Analysis and Forward Modeling of Weld Distortion in SMR Containment Vessels

This work aimed to apply Sandia’s expertise in metallurgy and modeling to enable the use of hybrid laser arc welding for building nuclear reactor containment structures, via a collaboration with Holtec International. Experimental observations were coupled with finite element analysis to resolve microstructure development, mechanical properties, distortion, and residual stress in welds relevant to the production of the Holtec SMR-160. High residual stresses were observed in welds that were not subjected to preheat. Meanwhile, the microstructure of the welds generally exhibited a narrow heat affected zone relative to conventional arc welds. FEA appeared to be effective in simulating the thermal/mechanical conditions that occur during hybrid laser arc welding of simplified and instrumented test welds. Subsequently, FEA was used to perform sensitivity analyses for various weld geometries that would be prohibitively costly to assess with physical experiments. Insights from the study were used to inform Holtec’s welding process, and successful production welds were performed in 2025.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2025

LBNF Material Activation Study

This poster presents a study on material activation at the Fermilab Long-Baseline Neutrino Facility (LBNF), focusing on understanding how high-energy beams interact with surrounding materials to produce radioactive isotopes. Using a simplified model of the LBNF-20 bunker and the FLUKA Monte Carlo simulation tool, the project quantifies isotope production at key locations inside and outside the shielding structures. The study employs a two-step simulation process, tracking primary and secondary particles, and explores the impact of different geometric and material configurations on activation rates. Results include preliminary comparisons of simulated activation rates and suggest methods for refining geometry, improving accuracy, and efficiently simulating future configurations. This work informs the design and operation of the LBNF facility, aiding in radiation safety and shielding optimization. Future efforts will focus on sample iteration, automated simulations, and detailed residual isotope analyses to further enhance the understanding of material activation in high-energy physics environments.

Pietraszek, Jacob [Unlisted, US]↗

DOE OSTI2025

Particle Swarm Optimization of Dynamic Load Model Parameters in Large Systems

This paper considers two dynamic load models that are widely used in industry to account for induction motor behavior: CMLD and CLOD. These models must be parametrized for the specific utility system in a general way so that they can be used in planning studies and provide a conservative but realistic representation of load behavior. This study considers a measurement-based approach to tuning both models. The load modeling study compares the response of the tuned models to generic candidate models using historical events. This study considers one area-based subsystem to simplify the modeling approach and reduce the number of models required for simulations. Additionally, because dynamic load models often produce similar results for different sets of parameters, a sensitivity study was conducted to assess the parameter impacts on the voltage response. The sensitivity study covers the parameters that are tuned using event measurements. The process to estimate the parameters uses the particle-swarm optimization algorithm. Overall, the performance of the tuned model more accurately captures recovery voltage, delayed recovery, and settling voltage than its predecessor models while not being overly tuned so that it remains general for peak summer conditions.

dynamic load modeling↗

DOE OSTI2022

Relativistic Alfvén Waves Entering Charge-starvation in the Magnetospheres of Neutron Stars

Instabilities in a neutron star can generate Alfvén waves in its magnetosphere. Propagation along the curved magnetic field lines strongly shears the wave, boosting its electric current j A . We derive an analytic expression for the evolution of the wavevector k and the growth of j A . In the strongly sheared regime, j A may exceed the maximum current j0 that can be supported by the background e ± plasma. We investigate these charge-starved waves, first using a simplified two-fluid analytic model, then with first-principles kinetic simulations. We find that the Alfvén wave is able to propagate successfully even when κ ≡ j A /j 0 $\ll$ 1. It sustains j A by compressing and advecting the plasma along the magnetic field lines with an increasing Lorentz factor, γ ≳ κ 1/2 . The simulations show how plasma instabilities lead to gradual dissipation of the wave energy. Our results suggest that an extremely high charge-starvation parameter κ ≳ 10 4 may be required in order for this mechanism to power the observed fast radio bursts (FRBs) from SGR 1935+2154. However, cosmological FRBs with much higher luminosities are unlikely to be a result of charge-starvation.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS1975

Further studies of methods for reducing community noise around airports

A simplified method of analysis was used in which all flights at a 'simulated' airport were assumed to operate from one runway in a single direction. For this simulated airport, contours of noise exposure forecast were obtained and evaluated. A flight schedule of the simulated airport which is representative of the 23 major U. S. airports was used. The effect of banning night-time operations by four-engine, narrow-body aircraft in combination with other noise reduction options was studied. The reductions in noise which would occur of two- and three-engine, narrow-body aircraft equipped with a refanned engine was examined. A detailed comparison of the effects of engine cutback on takeoff versus the effects of retrofitting quiet nacelles for narrow-body aircraft was also examined. A method of presenting the effects of various noise reduction options was treated.

Petersen, R. H.↗

NASA NTRS1975

Seasonal changes in the atmospheric heat balance simulated by the GISS general circulation model

Tests of the ability of numerical general circulation models to simulate the atmosphere have focussed so far on simulations of the January climatology. These models generally present boundary conditions such as sea surface temperature, but this does not prevent testing their ability to simulate seasonal changes in atmospheric processes that accompany presented seasonal changes in boundary conditions. Experiments to simulate changes in the zonally averaged heat balance are discussed since many simplified models of climatic processes are based solely on this balance.

Stone, P. H.↗

NASA NTRS1977

Digital controller design: Analysis of the annular suspension pointing system

The annular suspension and pointing system (ASPS) a payload auxiliary pointing device of the space shuttle is briefly described along with the function of the digital controller. The equations of motion of a simplified plan planar model of the ASPS are derived. Results of computer simulations are discussed.

Source record↗

NASA NTRS1981

Numerical simulation of natural convection in a spherical container due to cooling at the center (idealization of the Lal/Kroes experiment)

Natural convection in a spherical container with cooling at the center was numerically simulated using a numerical fluid dynamics computer program. The numerical analysis was simplified by assuming axisymmetric flow in the spherical container, with the symmetry axis being a sphere diagonal parallel to the gravity vector. This axisymmetric spherical geometry was intended as an idealization of the proposed Lal/Kroes crystal growing experiment to be performed on Spacelab. Results were obtained for a range of Rayleigh numbers from 25 to 10,000. The computed velocities were found to be approximately proportional to the Rayleigh number over the range of Rayleigh numbers investigated.

Robertson, S. J.↗

NASA NTRS1983

PDSS configuration control plan and procedures

The payload development support system (PDSS) configuration control plan and procedures are presented. These plans and procedures establish the process for maintaining configuration control of the PDSS system, especially the Spacelab experiment interface device's (SEID) RAU, HRM, and PDI interface simulations and the PDSS ECOS DEP Services simulation. The plans and procedures as specified are designed to provide a simplified but complete configuration control process. The intent is to require a minimum amount of paperwork but provide total traceability of PDSS during experiment test activities.

Source record↗