Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shock structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

A correlative study of ssc's, interplanetary shocks, and solar activity

Ninety-three ssc's during the 4-year period from 1968 to 1971 at and near the peak of the solar activity cycle were examined. Of the 93 ssc's, 81 could be associated with solar activity such as solar flares and type 2 and type 4 radio bursts. Disturbances associated with 48 of the ssc's have been studied in detail by using the corresponding interplanetary (IP) magnetic field and plasma data when they were available. It was found that 41 of the 48 disturbances corresponded to IP shock waves, and the remaining 7 events were tangential discontinuities. Thirty per cent of the IP shocks had thick structure (i.e., the magnetic field jump across the shock occurred over a distance much greater than 50 proton Larmor radii). By considering the orientations of 22 well-determined shock normals in relation to the positions of the parent flares on the solar disk, it is suggested that a typical shock front propagating out from the sun at 1 AU has a radius of curvature of the order of 1 AU.

Chao, J. K.↗
NASA NTRS1986

Interaction of two collisionless shocks

Kinetic simulations of the interaction between two collisionless shocks are presented. During the collision of two perpendicular shocks, the shock electromagnetic field structures pass through each other, while the previously shocked ions are kept separate by the electric field arising in the collision. When two supercritical shocks collide, a fraction of ions are accelerated up to an order of magnitude in energy by first being reflected at one shock, then interacting with the electric fields of the other shock.

Cargill, P. J.↗
NASA NTRS1990

Effects of shock on the stability of hypersonic boundary layers

A set of linearized shock boundary conditions is derived, which is then imposed at the shock to account for the interaction of the shock wave with the boundary/shock layer instability wave; these boundary conditions are used to study the effect of shock on hypersonic boundary layer stability under the assumption of quasi-parallel flow. The result show that the shock has little effect on the boundary layer instability (subsonic first and second mode disturbances) when the shock is located outside the boundary layer edge. When the shock is located near the boundary layer edge, it exerts a stabilizing influence on the first and second modes. The shock also induces unstable supersonic modes with oscillatory structure in the shock layer, but these modes grow slower than the subsonic modes.

Chang, Chau-Lyan↗
NASA NTRS1995

A numerical study of fundamental shock noise mechanisms

The results of this thesis demonstrate that direct numerical simulation can predict sound generation in unsteady aerodynamic flows containing shock waves. Shock waves can be significant sources of sound in high speed jet flows, on helicopter blades, and in supersonic combustion inlets. Direct computation of sound permits the prediction of noise levels in the preliminary design stage and can be used as a tool to focus experimental studies, thereby reducing cost and increasing the probability of a successfully quiet product in less time. This thesis reveals and investigates two mechanisms fundamental to sound generation by shocked flows: shock motion and shock deformation. Shock motion is modeled by the interaction of a sound wave with a shock. During the interaction, the shock wave begins to move and the sound pressure is amplified as the wave passes through the shock. The numerical approach presented in this thesis is validated by the comparison of results obtained in a quasi-one dimensional simulation with linear theory. Analysis of the perturbation energy demonstrated for the first time that acoustic energy is generated by the interaction. Shock deformation is investigated by the numerical simulation of a ring vortex interacting with a shock. This interaction models the passage of turbulent structures through the shock wave. The simulation demonstrates that both acoustic waves and contact surfaces are generated downstream during the interaction. Analysis demonstrates that the acoustic wave spreads cylindrically, that the sound intensity is highly directional, and that the sound pressure level increases significantly with increasing shock strength. The effect of shock strength on sound pressure level is consistent with experimental observations of shock noise, indicating that the interaction of a ring vortex with a shock wave correctly models a dominant mechanism of shock noise generation.

Meadows, Kristine R.↗
NASA NTRS2013

Characterizing the Response of Composite Panels to a Pyroshock Induced Environment Using Design of Experiments Methodology

This experimental study seeks to quantify the impact various composite parameters have on the structural response of a composite structure in a pyroshock environment. The prediction of an aerospace structure's response to shock induced loading is largely dependent on empirical databases created from collections of development and flight test data. While there is significant structural response data due to shock induced loading for metallic structures, there is much less data available for composite structures. One challenge of developing a composite shock response database as well as empirical prediction methods for composite structures is the large number of parameters associated with composite materials. This experimental study uses data from a test series planned using design of experiments (DOE) methods. Statistical analysis methods are then used to identify which composite material parameters most greatly influence a flat composite panel's structural response to shock induced loading. The parameters considered are panel thickness, type of ply, ply orientation, and shock level induced into the panel. The results of this test will aid in future large scale testing by eliminating insignificant parameters as well as aid in the development of empirical scaling methods for composite structures' response to shock induced loading.

Parsons, David↗
NASA NTRS1989

Molecule formation and infrared emission in fast interstellar shocks. III - Results for J shocks in molecular clouds

The structure and emission spectrum of J shocks in molecular gas are studied over a broad range of conditions. It is found that at high densities chemistry has a profound effect on the emission spectrum: the density behind the shock is sufficiently high that some of the internal energy of the newly formed H2 molecules is transformed to the gas as heat by collisional deexcitations, producing the H2 formation plateau. In this temperature plateau, endothermal reactions and neutral-neutral chemical reactions with activation energies can proceed efficiently, producing significant quantities of warm H2, CO, OH, and H2O and enhanced columns of warm atoms and ions. The heat generated by the H2 formation is radiated in collisionally excited atomic fine-structure lines.

Hollenbach, David↗
NASA NTRS1988

Effects of variables upon pyrotechnically induced shock response spectra, part 2

Throughout the aerospace industry, large variations of 50 percent (6 dB) or more in shock response spectra (SRS) derived from pyrotechnic separation events continue to be reported from actual spaceflight data and from laboratory tests. As a result of these variations, NASA funded a research program for 1984 through 1986. The purpose of the 1984 through 1986 project was to analyze variations in pyrotechnically induced SRS and to determine if and to what degree manufacturing and assembly variables and tolerances, distance from the shock source, data acquisition instrumentation, and shock energy propagation affect the SRS. Sixty-four free-free boundary plate tests were performed. NASA funded an additional study for 1987 through 1988. This paper is a summary of the additional study. The purpose was to evaluate shock dissipation through various spacecraft structural joint types, to evaluate shock variation for various manufacturing and assembly variables on clamped boundary test plates, and to verify data correction techniques. Five clamped boundary plate tests investigated manufacturing and assembly variables and mass loading effects. Six free-free boundary plate tests investigated shock dissipation across spacecraft joint structures.

Smith, James Lee↗
NASA NTRS1985

Shock tube study of the fuel structure effects on the chemical kinetic mechanisms responsible for soot formation, part 2

Soot formation in oxidation of allene, 1,3-butadiene, vinylacetylene and chlorobenzene and in pyrolysis of ethylene, vinylacetylene, 1-butene, chlorobenzene, acetylen-hydrogen, benzene-acetylene, benzene-butadiene and chlorobenzene-acetylene argon-diluted mixtures was studied behind reflected shock waves. The results are rationalized within the framework of the conceptual models. It is shown that vinylacetylene is much less sooty than allene, which indicates that conjugation by itself is not a sufficient factor for determining the sooting tendency of a molecule. Structural reactivity in the context of the chemical kinetics is the dominant factor in soot formation. Detailed chemical kinetic modeling of soot formation in pyrolysis of acetylene is reported. The main mass growth was found to proceed through a single dominant route composed of conventional radical reactions. The practically irreversible formation reactions of the fused polycyclic aromatics and the overshoot by hydrogen atom over its equilibrium concentration are the g-driving kinetic forces for soot formation.

Frenklach, M.↗
NASA NTRSDate not supplied

Fluid-Thermal-Structural Interactions Induced by an Asymmetric Shock-Wave/Boundary-Layer Interaction in a Mach-6 Compression Corner

An experimental study is conducted of the fluid-thermal-structural interaction of a clamped compliant panel exposed to a three dimensional shock-wave/boundary-layer interaction (SWBLI) induced by a Mach-6 compression ramp with a spanwise nonuniform incoming boundary layer. The nonuniform boundary layer was produced by placing trips on one side of the upstream flat plate, resulting in largely turbulent flow on the tripped side and transitional flow on the untripped side. Measurements of the flowfield confirmed that the tripped boundary layer contained elevated levels of unsteadiness, and the SWBLI was observed to vary from attached to fully separated as the ramp angle was increased from 10◦ to 38◦; the separation region on the tripped side of the panel was noticeably smaller, showing the elevated turbulence levels of the tripped-side flow to remain relatively localized rather than diffusing across the whole model. Full-field, time-resolved panel deformations were measured using high-speed photogrammetry and the vibrational response at each compression angle was characterized. Although the measured modes conformed largely to those from classical clamped-plate theory, some skewing of the mode shapes was observed. IR thermography highlighted regions of the compliant region where elevated temperatures were likely to promote thermal softening effects to the transient panel response. The quasi-static deformation and stress field was used to characterize the internal stress factor of each mode and showed a meaningful relationship between transient panel response and stress contained within each mode: modes with antinodes lying in high-stress areas of the plate tended to exhibit increases in vibrational frequency and decreases in vibrational power, whereas the opposite was true for modes with antinodes in low-stress areas.

Spectral Proper Orthogonal Decomposition↗
NASA NTRS1983

Upstream gyrophase bunched ions - A mechanism for creation at the bow shock and the growth of velocity space structure through gyrophase mixing

The conditions necessary for the production of gyrophase bunched ions at the bow shock are developed. The conditions are applied to the reflection mechanism presented by Paschmann et al. (1980), showing that when in their model a portion of the incident parallel velocity is converted into reflected perpendicular velocity, the reflected particles are gyrophase bunched. The growth of velocity space structure in the gyrophase bunched distribution through gyrophase mixing is also explored. The structure is found to be similar to that reported in diffuse and dispersed ion events. This together with the close correlation of the observation of gyrophase bunched ions with diffuse and dispersed ions has led us to speculate that these two populations may be closely related.

Gurgiolo, C.↗
NASA NTRS1978

The Shock and Vibration Bulletin. Part 3: Structure Medium Interaction, Case Studies in Dynamics

Structure and medium interactions topics are addressed. Topics include: a failure analysis of underground concrete structures subjected to blast loadings, an optimization design procedure for concrete slabs, and a discussion of the transient response of a cylindrical shell submerged in a fluid. Case studies in dynamics are presented which include an examination of a shock isolation platform for a seasparrow launcher, a discussion of hydrofoil fatigue load environments, and an investigation of the dynamic characteristics of turbine generators and low tuned foundations.

Director of Defense Research and Engineering↗
NASA NTRSDate not supplied

Twinned magnetite in granitic samples from the Siljan impact structure, Sweden

Impact cratering is a ubiquitous process throughout the solar system and has played a key role for the geologic evolution of Earth and other planets [1]. Magnetic anomalies are common characteristics of impact craters [2], so understanding how magnetite (Fe23+Fe2+O42-), an important magnetic carrier in both terrestrial and extraterrestrial rocks, is affected by shock waves, especially structurally and magnetically, is crucial. Magnetic minerals have been studied to gain insight into the geologic evolution of Mars, with specific focus including understanding the Martian crustal structure and the oxidization state of Martian rocks (e.g., [3,4,5]). Shock waves permanently alter the intrinsic magnetic properties of rocks (e.g., [6]), as do twinning in natural environments with less extreme P/T conditions [7]. In fact, pressure conditions induced by impacts have been suggested to explain demagnetization signatures observed around Martian impact basins [8]. It is still poorly understood what effects shock has on the crystallographic structure of magnetite and thus it’s intrinsic magnetic properties, and , how that affects the bulk magnetic properties of rocks (e.g., [9]). Limited experimental studies have investigated the effects of shock compression on magnetite, especially with the aim of describing crystallographic deformation (e.g., [9] and references therein). In this work we report preliminary results of an investigation of microstructures in magnetite, an “unconventional” mineral in shock studies, in granitic samples from the ca. 380 Ma ~52 km-in-diameter Siljan impact structure, located in south-central Sweden.

shock metamorphism↗
NASA NTRS1987

Initial dynamic load estimates during configuration design

This analysis includes the structural response to shock and vibration and evaluates the maximum deflections and material stresses and the potential for the occurrence of elastic instability, fatigue and fracture. The required computations are often performed by means of finite element analysis (FEA) computer programs in which the structure is simulated by a finite element model which may contain thousands of elements. The formulation of a finite element model can be time consuming, and substantial additional modeling effort may be necessary if the structure requires significant changes after initial analysis. Rapid methods for obtaining rough estimates of the structural response to shock and vibration are presented for the purpose of providing guidance during the initial mechanical design configuration stage.

Schiff, Daniel↗
NASA NTRS1979

Snaps in structures

Snaps as a type of shock phenomena which arise in structures employing films, or strings are studied. The sources and the variety of such snaps are defined and a new mathematical model for their investigation is presented.

Zak, M.↗
NASA NTRS1980

Studies of pressure oscillations in a research dump combustor

A coaxial research dump combustor was used to investigate the acoustic modes structure and its effect on the inlet shock system. Acoustic wave structure was determined including the amplitude, frequency, and phase as a function of position. Inlet shock position, shock displacement, shock displacement frequency, and phase relative to acoustic wave structure were also defined. All results were compared to with one dimensional modeling.

Schadow, K. C.↗
NASA NTRS2016

Prompt Injections of Highly Relativistic Electrons Induced by Interplanetary Shocks: A Statistical Study of Van Allen Probes Observations

We conduct a statistical study on the sudden response of outer radiation belt electrons due to interplanetary (IP) shocks during the Van Allen Probes era, i.e., 2012 to 2015. Data from the Relativistic Electron-Proton Telescope instrument on board Van Allen Probes are used to investigate the highly relativistic electron response (E greater than 1.8 MeV) within the first few minutes after shock impact. We investigate the relationship of IP shock parameters, such as Mach number, with the highly relativistic electron response, including spectral properties and radial location of the shock-induced injection. We find that the driving solar wind structure of the shock does not affect occurrence for enhancement events, 25% of IP shocks are associated with prompt energization, and 14% are associated with MeV electron depletion. Parameters that represent IP shock strength are found to correlate best with highest levels of energization, suggesting that shock strength may play a key role in the severity of the enhancements. However, not every shock results in an enhancement, indicating that magnetospheric preconditioning may be required.

Schiller, Q.↗
NASA NTRS1972

Study on multi-satellite, multi-measurement of the structure of the earth's bow shock

The pulsation model of the earth's bow shock proposed a nonuniform shock having both perpendicular (abrupt, monotonic) and oblique (oscillatory, multigradient) properties simultaneously, depending on local orientation of the shock surface to the interplanetary field B sub sw in parallel planes defined by B sub sw and solar wind velocity. Multiple, concurrent, satellite observations of the shock and solar wind conditions were used. Twenty-six potentially useful intervals of concurrent Explorer 33 and 35 data acquisition were examined, of which six were selected for closer study. In addition, two years of OGO-5 and HEOS 1 magnetometer data were examined for possible conjunctions to these spacecraft having applicable data. One case of clear nonuniformity and several of field-dependent structure were documented. A computational aid, called pulsation index, was developed.

Source record↗
NASA NTRS1984

The adiabatic energy change of plasma electrons and the frame dependence of the cross-shock potential at collisionless magnetosonic shock waves

The adiabatic energy gain of electrons in the stationary electric and magnetic field structure of collisionless shock waves was examined analytically in reference to conditions of the earth's bow shock. The study was performed to characterize the behavior of electrons interacting with the cross-shock potential. A normal incidence frame (NIF) was adopted in order to calculate the reversible energy change across a time stationary shock, and comparisons were made with predictions made by the de Hoffman-Teller (HT) model (1950). The electron energy gain, about 20-50 eV, is demonstrated to be consistent with a 200-500 eV potential jump in the bow shock quasi-perpendicular geometry. The electrons lose energy working against the solar wind motional electric field. The reversible energy process is close to that modeled by HT, which predicts that the motional electric field vanishes and the electron energy gain from the electric potential is equated to the ion energy loss to the potential.

Goodrich, C. C.↗