Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SULFONATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

A glucose sensor via stable immobilization of the GOx enzyme on an organic transistor using a polymer brush

Recently, there has been significant research in the area of organic electrochemical transistors (OECTs) because of their superior aptitude of chemical and biological sensing. Here it is shown for the first time the incorporation of polymer brushes to a transistor. Polymer brushes were chosen for their biocompatible properties and their ability to covalently tether enzymes and other biomolecules to different surfaces. OECTs were fabricated from the conducting polymer poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate), PEDOT:PSS, and polymerized from the surface a mixed polymer brush of poly(glycidyl methacrylate) and poly(2-hydroxyethyl methacrylate). The brushes were functionalized with glucose oxidase and measured in terms of electrical performance and long-term stability.

59 BASIC BIOLOGICAL SCIENCES↗

Novel Acid Catalysts from Waste-Tire-Derived Carbon: Application in Waste-to-Biofuel Conversion

Many inexpensive biofuel feedstocks, including those containing free fatty acids (FFAs) in high concentrations, are typically disposed of as waste due to our inability to efficiently convert them into usable biofuels. Here we demonstrate that carbon derived from waste tires could be functionalized with sulfonic acid (-SO 3 H) to effectively catalyze the esterification of oleic acid or a mixture of fatty acids to usable biofuels. Waste tires were converted to hard carbon, then functionalized with catalytically active -SO 3 H groups on the surface through an environmentally benign process that involved the sequential treatment with L-cysteine, dithiothreitol, and H 2 O 2 . In conclusion, when benchmarked against the same waste-tire derived carbon material treated with concentrated sulfuric acid at 150 °C, similar catalytic activity was observed. Both catalysts could also effectively convert oleic acid or a mixture of fatty acids and soybean oil to usable biofuels at 65 °C and 1 atm without leaching of the catalytic sites.

09 BIOMASS FUELS↗

Quasi‐Solid‐State Dye‐Sensitized Solar Cells Containing a Charged Thermoplastic Elastomeric Gel Electrolyte and Hydrophilic/phobic Photosensitizers

As the threat of global climate change due to combustion emissions becomes increasingly alarming, the search for clean and sustainable alternative energy is of paramount importance. With this objective in mind, harnessing solar energy is particularly attractive due to ongoing improvements in silicon‐, perovskite‐, and organic‐based solar cells. Of these, dye‐sensitized solar cells (DSSCs) constitute a promising technology due to their relatively low cost, moderate conversion efficiency, and robust mechanical properties. An important breakthrough in the development of DSSCs is the use of polymer gel electrolytes. In this work, we employ amphi­philic thermoplastic elastomers (TPEs) in the form of sulfonated block ionomer (SBI) homologs for this purpose. Since the midblock of each charged copolymer is hydrophilic, the resultant microphase‐separated nanostructures consist of continuous ionic channels that facilitate electron diffusion. A unique characteristic of the SBI archetype studied here is that the morphology can be solvent‐templated. We exploit this feature by introducing either hydrophilic or hydrophobic photosensitizers into the DSSCs. When the SBI exhibits a primarily lamellar morphology, a hydrophilic dye yields the highest efficiency (7.0%), whereas the opposite is observed when the nanostructure consists of a solvent‐templated nonpolar matrix. Photosensi­tizer tunability is augmented by the intrinsic mechanical and adhesive properties of a TPE.

Al‐Mohsin, Heba A.↗

Super Flexible Transparent Conducting Oxide-Free Organic–Inorganic Hybrid Perovskite Solar Cells with 19.01% Efficiency (Active Area=1 cm 2 )

Highly efficient organic-inorganic hybrid perovskite solar cells (OIHP-SCs) are often fabricated on a transparent conducting oxide (TCO) substrate such as indium tin oxide (ITO). However, the presence of TCOs is disadvantageous to the development of flexible OIHP-SCs due to the brittle nature of ITO which is easily breakable during bending. Herein, a flexible TCO-free OIHP-SC is demonstrated by using lithium bis(trifluoromethane)sulfonimide (Li-TFSI) as a codopant for the single-layer graphene transparent conducting electrode and poly(triarylamine) hole-transporting material (HTM) on a flexible polydimethylsiloxane substrate. The optical and electrical properties of the Li-TFSI-doped graphene substrate are measured by controlling the doping amount and the best conditions for charge extraction are established at a doping concentration of 20 mm Li-TFSI, thus optimizing the device photovoltaic performance. As a result, a highest power conversion efficiency of 19.01% is demonstrated by the flexible TCO-free OIHP-SC devices with an active area of 1 cm 2 . In addition, the flexible TCO-free OIHP-SCs exhibit good bending stability after 5000 bending cycles at radii of 6, 4, and 2 mm and excellent light soaking stability under 1 Sun light intensity over 1000 h as opposed to the poor stability when using poly(3,4-ethylenedioxythiophene) polystyrene sulfonate as the HTM.

14 SOLAR ENERGY↗

Description of the first fungal dye-decolorizing peroxidase oxidizing manganese(II)

Two phylogenetically divergent genes of the new family of dye-decolorizing peroxidases (DyPs) were found during comparison of the four DyP genes identified in the Pleurotus ostreatus genome with over 200 DyP genes from other basidiomycete genomes. The heterologously expressed enzymes ( Pleos -DyP1 and Pleos -DyP4, following the genome nomenclature) efficiently oxidize anthraquinoid dyes (such as Reactive Blue 19), which are characteristic DyP substrates, as well as low redox-potential dyes (such as 2,2-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid)) and substituted phenols. However, only Pleos -DyP4 oxidizes the high redox-potential dye Reactive Black 5, at the same time that it displays high thermal and pH stability. Unexpectedly, both enzymes also oxidize Mn 2+ to Mn 3+ , albeit with very different catalytic efficiencies. Pleos -DyP4 presents a Mn 2+ turnover (56 s –1 ) nearly in the same order of the two other Mn 2+ -oxidizing peroxidase families identified in the P. ostreatus genome: manganese peroxidases (100 s–1 average turnover) and versatile peroxidases (145 s –1 average turnover), whose genes were also heterologously expressed. Oxidation of Mn 2+ has been reported for an Amycolatopsis DyP (24 s –1 ) and claimed for other bacterial DyPs, albeit with lower activities, but this is the first time that Mn 2+ oxidation is reported for a fungal DyP. Interestingly, Pleos -DyP4 (together with ligninolytic peroxidases) is detected in the secretome of P. ostreatus grown on different lignocellulosic substrates. In conclusion, it is suggested that generation of Mn 3+ oxidizers plays a role in the P. ostreatus white-rot lifestyle since three different families of Mn 2+ -oxidizing peroxidase genes are present in its genome being expressed during lignocellulose degradation.

59 BASIC BIOLOGICAL SCIENCES↗

First Human Experience with Directly Image-able Iodinated Embolization Microbeads

PurposeTo describe first clinical experience with a directly image-able, inherently radio-opaque microspherical embolic agent for transarterial embolization of liver tumors.MethodologyLC Bead LUMI™ is a new product based upon sulfonate-modified polyvinyl alcohol hydrogel microbeads with covalently bound iodine (~260 mg I/ml). 70–150 μ LC Bead LUMI™ iodinated microbeads were injected selectively via a 2.8 Fr microcatheter to near complete flow stasis into hepatic arteries in three patients with hepatocellular carcinoma, carcinoid, or neuroendocrine tumor. A custom imaging platform tuned for LC LUMI™ microbead conspicuity using a cone beam CT (CBCT)/angiographic C-arm system (Allura Clarity FD20, Philips) was used along with CBCT embolization treatment planning software (EmboGuide, Philips).ResultsLC Bead LUMI™ image-able microbeads were easily delivered and monitored during the procedure using fluoroscopy, single-shot radiography (SSD), digital subtraction angiography (DSA), dual-phase enhanced and unenhanced CBCT, and unenhanced conventional CT obtained 48 h after the procedure. Intra-procedural imaging demonstrated tumor at risk for potential under-treatment, defined as paucity of image-able microbeads within a portion of the tumor which was confirmed at 48 h CT imaging. Fusion of pre- and post-embolization CBCT identified vessels without beads that corresponded to enhancing tumor tissue in the same location on follow-up imaging (48 h post).ConclusionLC Bead LUMI™ image-able microbeads provide real-time feedback and geographic localization of treatment in real time during treatment. The distribution and density of image-able beads within a tumor need further evaluation as an additional endpoint for embolization.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Spectrophotometric Determination of Tris(2-Chloroethyl)Amine Using Acid Dyes

Methods of extraction-spectrophotometric determination of tris(2-chloroethyl)amine using nine acid dyes from the groups of sulfonephthaleins, sulfonated anthraquinones, and azo dyes have been developed. These procedures are based on the formation of the ion associates of the reactants and their extraction into chloroform. The conditions of the determination were optimized to determine the optimal pH for extraction from the water phase, the optimal excess of the dye, and the time needed for the extraction. The limits of detection and determination, the molar absorptivities of ion associates, extraction efficiency, distribution ratio, and conditional extraction constants for the separate procedures of determination were calculated. Of the studied acid dyes, the most suitable agents for determining the analyte were bromothymol blue and Acid Blue 129. These procedures are relatively undemanding in terms of time and instruments required and can be applied in field analysis of nitrogen mustards.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chitosan/Polyaniline Conductive Blends for Developing Packaging: Electrical, Morphological, Structural and Thermal Properties

The present study aim to evaluate the development of electrical conducting blends made from the biodegradable polymer, chitosan (Cs), and polyaniline (PANI) doped with dodecylbenzene sulfonic acid dissolved in acid solution chitosan, to enable development of conductive and smart packages that help to monitor exposure conditions of food aimed to reduce food waste. Concentration of Cs is fixed (2%), and PANI (80, 100 mg mL{sup −1}) and glutaraldehyde (Glut) (0.625 × 10{sup −3} μL) concentrations are alter. Morphological (SEM), structural (FTIR, RAMAN), thermal (TGA) and electrical (Hall effect) properties are evaluate. Blends were predominantly negative carriers, with conductivity in order of 10{sup −1} S cm{sup −1}. Best formulations are those make without of Glut. Analyses show an interaction between components. FTIR show bands characteristic of benzene and quinoid rings of PANI, and RAMAN exhibit a band related to PANI’s protonation. TGA show maintenance of maximum degradation temperature of PANI. This results evidence maintenance of PANI’s conducting structures even after blends synthesis.

36 MATERIALS SCIENCE↗

Poisoning of Ru/C by homogeneous Brønsted acids in hydrodeoxygenation of 2,5-dimethylfuran via catalytic transfer hydrogenation

It has been proposed that the combination of metal and acid sites is critical for effective ring opening of biomass-derived furans to linear molecules, a reaction that holds promise for the production of renewable polymer precursors and alkanes. As such, in this work, we use 2,5-dimethylfuran (DMF) as a model compound to investigate hydrogenolysis and hydrogenation pathways using a combination of H 2 SO 4 and Ru-mediated catalytic transfer hydrogenation in 2-propanol. Acid-catalyzed hydrolytic ring opening of DMF to 2,5-hexanedione (HDN) occurs readily at 80 °C with a selectivity of 89% in 2-propanol. Over Ru/C, HDN is fully converted after only 2 h at 80 °C, forming a mixture of both ring-closed products (~68% total yield), i.e., 2,5-dimethyltetrahydrofuran (DMTHF) and 2,5-dimethyl-2,3-dihydrofuran (DMDHF), as well as ring opened products (~28% total yield), i.e., 2,5-hexanediol (2,5-HDL) and 2-hexanol (HOL). Rather than observing sequential hydrolysis/hydrogenation reactions, we observe severe suppression of metal chemistry when having both Ru/C and H 2 SO 4 in the reaction system. While minor leaching of Ru occurs in the presence of mineral acids, X-ray photoelectron spectroscopy coupled with CO chemisorption studies suggest that the primary cause of the lack of Ru-mediated chemistry is poisoning by strongly adsorbed sulfate species. This hypothesis is supported by the observation of Ru-catalyzed chemistry when replacing H 2 SO 4 with Nafion, a solid Brønsted acid, as sulfonic acid groups tethered to the polymer backbone cannot adsorb on the metal sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single-unit-cell layer established Bi 2 WO 6 3D hierarchical architectures: Efficient adsorption, photocatalysis and dye-sensitized photoelectrochemical performance

Single-layer catalysis sparks huge interests and gains widespread attention owing to its high activity. Simultaneously, three-dimensional (3D) hierarchical structure can afford large surface area and abundant reactive sites, contributing to high efficiency. Herein, we report an absorbing single-unit-cell layer established Bi2WO6 3D hierarchical architecture fabricated by a sodium dodecyl benzene sulfonate (SDBS)-assisted assembled strategy. The DBS- long chains can adsorb on the (Bi2O2)2+ layers and hence impede stacking of the layers, resulting in the single-unit-cell layer. We also uncovered that SDS with a shorter chain is less effective than SDBS. Due to the sufficient exposure of surface O atoms, single-unit-cell layer 3D Bi2WO6 shows strong selectivity for adsorption on multiform organic dyes with different charges. Remarkably, the single-unit-cell layer 3D Bi2WO6 casts profoundly enhanced photodegradation activity and especially a superior photocatalytic H2 evolution rate, which is 14-fold increase in contrast to the bulk Bi2WO6. Systematic photoelectrochemical characterizations disclose that the substantially elevated carrier density and charge separation efficiency take responsibility for the strengthened photocatalytic performance. Additionally, the possibility of single-unit-cell layer 3D Bi2WO6 as dye-sensitized solar cells (DSSC) has also been attempted and it was manifested to be a promising dye-sensitized photoanode for oxygen evolution reaction (ORR). Our work not only furnish an insight into designing single-layer assembled 3D hierarchical architecture, but also offer a multi-functional material for environmental and energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rare-earth element fractionation in uranium ore and its U(VI) alteration minerals

We developed a cation exchange chromatography method employing sulfonated polysterene cation resin (DOWEX AG50-X8) in order to separate rare-earth elements (REEs) from uranium-rich materials. The chemical separation scheme is designed to reduce matrix effects and consequently yield enhanced ionization efficiencies for concentration determinations of REEs without significant fractionation using solution mode-inductively coupled plasma mass spectrometry (ICP-MS) analysis. This method was then applied to determine REE abundances in four uraninite (ideally UO 2 ) samples and their associated U(VI) alteration minerals. In three of the samples analyzed, the concentration of REEs for primary uraninite are higher than those for their corresponding secondary uranium alteration phases. The results for U(VI) alteration minerals of two samples indicate enrichment of the light REEs (LREEs) over the heavy REEs (HREEs). This differential mobilization is attributed to differences in the mineralogical composition of the U(VI) alteration. There is a lack of fractionation of the LREEs in the uraninite alteration rind that is composed of U(VI) minerals containing Ca 2+ as the interlayer cation (uranophane and bequerelite); contrarily, U(VI) alteration minerals containing K + and Pb 2+ as interlayer cations (fourmarierite, dumontite) indicate fractionation (enrichment) of the LREEs. Our results have implications for nuclear forensic analyses since a comparison is reported between the REE abundances for the CUP-2 (processed uranium ore) certified reference material and previously determined values for uranium ore concentrate (UOC) produced from the same U deposit (Blind River/Elliott Lake, Canada). UOCs represent the most common form of interdicted nuclear material and consequently is material frequently targeted for forensic analysis. The comparison reveals similar chondrite normalized REE signatures but variable absolute abundances. Based on the results reported here, the latter may be attributed to the differing REE abundances between primary ore and associated alteration phases, and/or is related to varying fabrication processes adopted during production of UOC.

58 GEOSCIENCES↗

Surface modification of carbon black nanoparticles enhances photothermal separation and release of CO 2

Here, carbon black nanoparticles (CB) were covalently modified to improve the photothermal regeneration of a CO 2 capture nanofluid through decarboxylation. The photothermal release of CO 2 addresses high energy costs associated with regenerating capture fluids. By incorporating sulfonamides on the surface of CB, we enhance the photothermal separation of CO 2 from MEA by approximately 70% more than the unmodified CB. In contrast, with an anionic sulfonate on the surface, the total CO 2 released fell by approximately 60%. We verified the chemical composition and structure of surface modification using complementary techniques including FT-IR, TGA, XPS, and Raman spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gold nanocatalysts supported on heterostructured PbSO4-MCF mesoporous materials for CO oxidation

Metal oxides are commonly used as the supports of gold nanoparticles for catalytic CO oxidation, whereas metal salts are rarely considered suitable supports. In the present work, we developed a new kind of gold nanocatalyst supported on heterostructured PbSO4-MCF mesoporous materials that was prepared by an in situ growth method using dodecylbenzenesulfonate (SOBS) as a sulfonate precursor. It was found that an Au/PbSO4-MCF (SDBS) catalyst preheated at 300 degrees C showed high CO conversion below 100 degrees C. In addition, the stability of selected catalysts was studied as a function of time on stream. Because of the alteration of surface properties, these Au nanocatalysts were highly sinter-resistant. Published by Elsevier B.V.

Li, Lin↗

Ultra-selective membrane composed of charge-stabilized fixed carrier and amino acid-based ionic liquid mobile carrier for highly efficient carbon capture

Membrane technology has been extensively studied for CO 2 capture applications, especially for flue gas sources. In the past decades, facilitated transport membranes (FTMs) have made breakthroughs overcoming the permeance-selectivity trade-off upper bound restricting traditional CO 2 separation membranes, but are still facing challenges towards practical applications, including limited performance, such as insufficient CO 2 /N 2 selectivity to achieve 95 % CO 2 dry-base purity by one step separation, and long-term stability. Herein, we designed and fabricated a novel FTM structure containing an ionic liquid (1-ethyl-3-methylimidazolium aminoacetate, [Emim][Gly]) as mobile CO 2 -carrier and a polymeric amine (polyethyleneimine, PEI) as fixed CO 2 -carrier. In this study, the fixed carrier is confined within a carbon nanotube (CNT) framework of 230 nm thickness via electrostatic forces adjusted by a polyelectrolyte (polystyrene sulfonate, PSS), while the mobile carrier diffuses freely within the CNT framework. After optimization of the membrane recipe and spray-coating fabrication procedure, following our previous work, the resulting CNT-PSS-PEI ~ IL membranes demonstrated an ultra-high CO 2 /N 2 selectivity up to 1,000 with CO 2 permeance up to 2,400 GPU (Gas Permeation Unit, 1 GPU = 3.348 × 10 -10 mol·s -1 ·m -2 ·Pa -1 ) under vacuum operation condition. Furthermore, one 100-cm 2 flat sheet membrane sample was prepared and exhibited one-stage CO 2 enrichment from 15 % to 95 % purity (dry-base) for the first time amongst all reported CO 2 separation membranes. The membrane retained a stable performance over 50-h operation period under vacuum condition. The extraordinary CO 2 separation performance illustrates the great potential of the CNT-PSS-PEI ~ IL membranes for flue gas carbon capture application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Buried interface modulation via $\mathrm{PEDOT:PSS}$ ionic exchange for the Sn-Pb mixed perovskite based solar cells

To apply Sn-Pb mixed perovskite solar cells for highly efficient single- or multi-junction devices, understanding device-specific buried interfaces is necessary. Poly [3,4-ethylenedioxythiophene]:poly[styrene sulfonate] (PEDOT:PSS) is primarily used as a hole transport layer in Sn-Pb mixed perovskite solar cells. However, the spatial heterogeneity of PEDOT:PSS, caused by its PEDOT-rich and PSS-rich domains, induces many defects at the buried interface in PEDOT:PSS/perovskite, which limits device performance. Here, we present ionic exchange (IE) of PEDOT:PSS via a combination of methylamine iodide (MAI) and dimethyl sulfoxide (DMSO). Through surface analyses and density functional theory (DFT) simulations, we confirm that the IE process preferentially form PEDOT-I and MA-PSS and that PSS-rich domains bind to DMSO. Thus, the spatial separation of PEDOT:PSS is solved, and the exchanged MA + and I - ions serve as a bridge between PEDOT:PSS and the perovskite, leading to improved physical, chemical, and electrical properties of the buried interface. The Sn-Pb mixed perovskite solar cells using IE-PEDOT:PSS achieve an improved efficiency of 21.3% with an open-circuit voltage of 0.85 V and show better long-term stability. Additionally, IE-PEDOT:PSS works effectively in 2-terminal all-perovskite tandem devices, resulting in an improved efficiency of 23.5% and high reproducibility.

14 SOLAR ENERGY↗

Interaction between alpha-calcium sulfate hemihydrate and superplasticizer from the point of adsorption characteristics, hydration and hardening process

Superplasticizers (SPs), namely sulfonated melamine formaldehyde (SMF) and polycarboxylate (PC), were independently admixed with alpha-calcium sulfate hemihydrate based plaster to improve the material's performance. SMF and PC gave, respectively, 38% and 25% increases in the 2 h bending strength at the optimum dosages of 0.5 wt.% and 0.3 wt.%, which are determined essentially by the maximum water-reducing efficiency. The peak shift of binding energy of Ca2p{sub 3/2} detected by X-ray photoelectron spectroscopy (XPS) suggests that SPs are chemically adsorbed on gypsum surface. A careful examination of the strength development of set plaster allowed the hydration and hardening process to be divided roughly into five stages. SMF accelerates early hydration, while PC decelerates it. Both SPs allowed similar maximum water reductions, giving a more compact structure and a decrease in total pore volume and average pore diameter, and thus leading to higher strengths in the hardened plasters with SPs.

36 MATERIALS SCIENCE↗

Screening of transition metals for PFAS adsorption: A comparative DFT investigation

Transition metals are promising candidates for catalytic destruction of per- and polyfluoroalkyl substances (PFAS). This study employed density functional theory (DFT) calculations to systematically investigate the adsorption of PFAS, which is a critical step in the catalytic process, onto a group of transition metals, namely Cu, Pd, Pt, and Rh. The investigation considered the influence of different PFAS characteristics, including chain length, functional group (i.e., sulfonic vs. carboxylic), and protonation state (i.e., protonated, anionic, and deprotonated radical) on the adsorption mechanism. Overall, the findings indicated that the adsorption of PFAS on transition metals exhibited thermodynamically favorable energetics, with Rh showing the most favorable adsorption for PFAS. However, the adsorption strength was significantly dependent on the protonation state of PFAS. Cu was the highest electron donor, while Pt was the highest electron acceptor. Results were compared to experimental studies in the literature for qualitative validation.

Adsorption↗