Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STRESS FUNCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Study of a flight monitor for jet engine disk cracks using the critical length criterion of fracture mechanics

A disk crack detector is discussed which is intended to operate while in flight. The crack detector monitors the disk rim for radial surface cracks emanating from the blade root interface. An eddy current type sensor with a remotely located capacitance-resistance bridge and signal analyzer is able to detect reliably a simulated crack 1/8 in. long. The sensor was tested at rim velocities of 600 fps and at 1000 F. Fracture mechanics is used to calculate the critical crack length. Knowledge of the crack growth rate permits the calculation of the number of stress cycles remaining for the detected crack to grow to critical size. A plot is presented of the remaining life as a function of the critical crack length and the operating stress. It is shown that for a disk of Inconel 718 a through-the-thickness crack operating under a rim stress of 50 kpsi has a critical length of 0.7-in. and a remaining life of 130 flights.

Barranger, J. P.↗

Hypergravity Alters the Susceptibility of Cells to Anoxia-Reoxygenation Injury

Gravity is a physical force, much like shear stress or mechanical stretch, and should affect organ and cellular function. Researchers have shown that gravity plays a role in ventilation and blood flow distribution, gas exchange, alveolar size and mechanical stresses within the lung. Short exposure to microgravity produced marked alterations in lung blood flow and ventilation distribution while hypergravity exaggerated the regional differences in lung structure and function resulting in reduced ventilation at the base and no ventilation of the upper half of the lung. Microgravity also decreased metabolic activity in cardiac cells, WI-38 embryonic lung cells, and human lymphocytes. Rats, in the tail-suspended head-down tilt model, experienced transient loss of lung water, contrary to an expected increase due to pooling of blood in the pulmonary vasculature. Hypergravity has also been found to increase the proliferation of several different cell lines (e.g., chick embryo fibroblasts) while decreasing cell motility and slowing liver regeneration following partial hepatectomy. These studies show that changes in the gravity environment will affect several aspects of organ and cellular function and produce major change in blood flow and tissue/organ perfusion. However, these past studies have not addressed whether ischemia-reperfusion injury will be exacerbated or ameliorated by changes in the gravity environment, e.g., space flight. Currently, nothing is known about how gravity will affect the susceptibility of different lung and vascular cells to this type of injury. We conducted studies that addressed the following question: Does the susceptibility of lung fibroblasts, vascular smooth muscle, and endothelial cells to anoxia/reoxygenation injury change following exposure to hypergravity conditions?

McCloud, Henry↗

Minimum weight design of rotorcraft blades with multiple frequency and stress constraints

Minimum weight designs of helicopter rotor blades with constraints on multiple coupled flap-lag natural frequencies are studied. Constraints are imposed on the minimum value of the blade autorotational inertia to ensure sufficient rotary inertia to autorotate in case of engine failure and on stresses to guard against structural failure due to blade centrifugal forces. Design variables include blade taper ratio, dimensions of the box beam located inside the airfoil and magnitudes of nonstructural weights. The program CAMRAD is used for the blade modal analysis; the program CONMIN is used for the optimization. A linear approximation involving Taylor series expansion is used to reduce the analysis effort. The procedure contains a sensitivity analysis consisting of analytical derivatives for objective function and constraints on autorotational inertia and stresses. Central finite difference derivatives are used for frequency constraints. Optimal designs are obtained for both rectangular and tapered blades. Using this method, it is possible to design a rotor blade with reduced weight, when compared to a baseline blade, while satisfying all the imposed design requirements.

Chattopadhyay, Aditi↗

GVIPS Prediction of Cyclic Ratchetting Behavior and Cycles With Interrupted Relaxation Periods of TIMETAL 21S at 650 oC

The predictive performance of a multimechanism GVIPS model with saturating hardening function is assessed against a set of high temperature cyclic experiments under both strain-control and stress-control at varying rates of loading as well as several complex interrupted cyclic responses. The material specimens were composed of the titanium alloy, TIMETAL 21S, and tested at 650oC, see Lissenden et al., 2007. The model did a very good job of predicting the variety of tests, particularly given the fact that only monotonic loading tests (tensile, creep, relaxation) and a single fully reversed cycle was used for characterization. It was particularly interesting that the model was capable of reasonably capturing the rate of accumulated strain during ratchetting under tensile mean stress. Given complex interrupted cyclic response, the model was able to both qualitatively and even quantitatively predict reasonably well both the cyclic and associated relaxation periods (in all quadrants of the stress-strain space) thus confirming the validity of the chosen functional forms for both hardening and thermal recovery. The quantitative inaccuracy is associated with the fact that the material specimens tested by Lissenden et al., 2007 was significantly “softer” than those tested by Castelli in Saleeb et al., 1994 which were used for characterization of the GVIPS model parameters.

Viscoplaticity↗

GVIPS Prediction of Cyclic Ratchetting Behavior and Cycles with Interrupted Relaxation Periods of TIMETAL 21S at 650 °C

The predictive performance of a multimechanism GVIPS model with saturating hardening function is assessed against a set of high temperature cyclic experiments under both strain-control and stress-control at varying rates of loading as well as several complex interrupted cyclic responses. The material specimens were composed of the titanium alloy, TIMETAL 21S, and tested at 650 °C, see Lissenden et al., 2007. The model did a very good job of predicting the variety of tests, particularly given the fact that only monotonic loading tests (tensile, creep, relaxation) and a single fully reversed cycle was used for characterization. It was particularly interesting that the model was capable of reasonably capturing the rate of accumulated strain during ratchetting under tensile mean stress. Given complex interrupted cyclic response, the model was able to both qualitatively and even quantitatively predict reasonably well both the cyclic and associated relaxation periods (in all quadrants of the stress-strain space) thus confirming the validity of the chosen functional forms for both hardening and thermal recovery. The quantitative inaccuracy is associated with the fact that the material specimens tested by Lissenden et al., 2007 was significantly “softer” than those tested by Castelli in Saleeb et al., 1994 which were used for characterization of the GVIPS model parameters.

Viscoplaticity↗

Toward a Turbulence Constitutive Relation for Rotating Flows

In rapidly rotating turbulent flows the largest scales of the motion are in approximate geostrophic balance. Single-point turbulence closures, in general, cannot attain a geostrophic balance. This article addresses and resolves the possibility of constitutive relation procedures for single-point second order closures for a specific class of rotating or stratified flows. Physical situations in which the geostrophic balance is attained are described. Closely related issues of frame-indifference, horizontal nondivergence, Taylor-Proudman theorem and two-dimensionality are, in the context of both the instantaneous and averaged equations, discussed. It is shown, in the absence of vortex stretching along the axis of rotation, that turbulence is frame-indifferent. A derivation and discussion of a geostrophic constraint which the prognostic equations for second-order statistics must satisfy for turbulence approaching a frame-indifferent limit is given. These flow situations, which include rotating and nonrotating stratified flows, are slowly evolving flows in which the constitutive relation procedures are useful. A nonlinear non-constant coefficient representation for the rapid-pressure strain covariance appearing in the Reynolds stress and heat flux equations consistent with the geostrophic balance is described. The rapid-pressure strain model coefficients are not constants determined by numerical optimization but are functions of the state of the turbulence as parameterized by the Reynolds stresses and the turbulent heat fluxes. The functions are valid for all states of the turbulence attaining their limiting values only when a limit state is achieved. These issues are relevant to strongly vortical flows as well as flows such as the planetary boundary layers, in which there is a transition from a three-dimensional shear driven turbulence to a geostrophic or horizontal turbulence.

Ristorcelli, J. R.↗

MAP kinase pathways in the yeast Saccharomyces cerevisiae

A cascade of three protein kinases known as a mitogen-activated protein kinase (MAPK) cascade is commonly found as part of the signaling pathways in eukaryotic cells. Almost two decades of genetic and biochemical experimentation plus the recently completed DNA sequence of the Saccharomyces cerevisiae genome have revealed just five functionally distinct MAPK cascades in this yeast. Sexual conjugation, cell growth, and adaptation to stress, for example, all require MAPK-mediated cellular responses. A primary function of these cascades appears to be the regulation of gene expression in response to extracellular signals or as part of specific developmental processes. In addition, the MAPK cascades often appear to regulate the cell cycle and vice versa. Despite the success of the gene hunter era in revealing these pathways, there are still many significant gaps in our knowledge of the molecular mechanisms for activation of these cascades and how the cascades regulate cell function. For example, comparison of different yeast signaling pathways reveals a surprising variety of different types of upstream signaling proteins that function to activate a MAPK cascade, yet how the upstream proteins actually activate the cascade remains unclear. We also know that the yeast MAPK pathways regulate each other and interact with other signaling pathways to produce a coordinated pattern of gene expression, but the molecular mechanisms of this cross talk are poorly understood. This review is therefore an attempt to present the current knowledge of MAPK pathways in yeast and some directions for future research in this area.

Non-NASA Center↗

The Extensional Rheology of Non-Newtonian Materials

The evolution of the transient extensional stresses in dilute and semi-dilute viscoelastic polymer solutions are measured with a filament stretching rheometer of a design similar to that first introduced by Sridhar, et al. The solutions are polystyrene-based (PS) Boger fluids that are stretched at constant strain rates ranging from 0.6 less than or equal to epsilon(0) less than or equal to 4s(exp -1) and to Hencky strains of epsilon greater than 4. The test fluids all strain harden and Trouton ratios exceeding 1000 are obtained at high strains. The experimental data strain hardens at lower strain levels than predicted by bead-spring FENE models. In addition to measuring the transient tensile stress growth, we also monitor the decay of the tensile viscoelastic stress difference in the fluid column following cessation of uniaxial elongation as a function of the total imposed Hencky strain and the strain rate. The extensional stresses initially decay very rapidly upon cessation of uniaxial elongation followed by a slower viscoelastic relaxation, and deviate significantly from FENE relaxation predictions. The relaxation at long times t is greater than or equal to 5 s, is compromised by gravitational draining leading to non-uniform filament profiles. For the most elastic fluids, partial decohension of the fluid filament from the endplates of the rheometer is observed in tests conducted at high strain rates. This elastic instability is initiated near the rigid endplate fixtures of the device and it results in the progressive breakup of the fluid column into individual threads or 'fibrils' with a regular azimuthal spacing. These fibrils elongate and bifurcate as the fluid sample is elongated further. Flow visualization experiments using a modified stretching device show that the instability develops as a consequence of an axisymmetry-breaking meniscus instability in the nonhomogeneous region of highly deformed fluid near the rigid endplate.

Spiegelberg, Stephen H.↗

Neuroimmune Responses to Space Radiation

One of the main health risks in human deep space exploration is central nervous system (CNS) damage by ionizing radiation due to exposure to galactic cosmic rays (GCRs). In animal models, irradiation with simulated GCRs or their components has been shown to cause neurodegeneration and neuroinflammation associated with cognitive and behavioral dysfunction. The extent of CNS damage is partially mediated by the blood-brain barrier (BBB), which regulates the interaction between CNS and systemic responses to stressors in the rest of the body. The main cellular regulators of BBB permeability are astrocytes, which also modulate neuronal death, neuroinflammation and oxidative stress. However, studies on BBB and astrocyte functions in regulating CNS responses to ionizing radiation have been limited, especially in human tissue/organ analogs. Therefore, we developed a high-throughput 3D organ-on-a-chip system to study human CNS and BBB impairments caused by deep space radiation. We investigated both immediate and delayed CNS responses to major GCR components: 600MeV/n 56Fe ions. We observed ionizing radiation-mediated dose-dependent increases in BBB permeability that was exacerbated by astrocyte presence and accompanied by altered cytokine expression including interleukin-1 receptor alpha downregulation, and increased oxidative stress. In particular, 600MeV/n 56Fe particle irradiation selectively increased damage and blood-brain barrier permeability only in models that contained astrocytes in addition to endothelial cells, indicating astrocytes as a particularly radiosensitive component of the CNS that could therefore be a suitable a target for neuroprotection. Future studies will compare human and mouse CNS model responses to simulated GCRs and evaluate the induction of an anti-inflammatory phenotype in astrocytes as a potential countermeasure. Furthermore, in our lab we have been exploring the individual variability, genomic associations and secreted biomarkers of responses to space radiation, which could eventually be combined to address personalized CNS health risk and develop individual countermeasures. Ultimately, we aim to expand upon these results to uncover novel cellular and mechanistic targets for countermeasure development to mitigate human CNS damage in deep space exploration.

space radiation↗

Stress-intensity factors and crack-opening displacements for round compact specimens

A two dimensional, boundary collocation stress analysis was used to analyze various round compact specimens. The influence of the round external boundary and of pin-loaded holes on stress intensity factors and crack opening displacements was determined as a function of crack-length-to-specimen-width ratios. A wide-range equation for the stress intensity factors was developed. Equations for crack-surface displacements and load-point displacements were also developed. In addition, stress intensity factors were calculated from compliance methods to demonstrate that load-displacement records must be made at the loading points and not along the crack line for crack-length-to-specimen-width ratios less than about 0.4.

Newman, J. C., Jr.↗

A variational method for finite element stress recovery and error estimation

A variational method for obtaining smoothed stresses from a finite element derived nonsmooth stress field is presented. The method is based on minimizing a functional involving discrete least-squares error plus a penalty constraint that ensures smoothness of the stress field. An equivalent accuracy criterion is developed for the smoothing analysis which results in a C sup 1-continuous smoothed stress field possessing the same order of accuracy as that found at the superconvergent optimal stress points of the original finite element analysis. Application of the smoothing analysis to residual error estimation is also demonstrated.

Tessler, A.↗

Distribution of Reynolds stress carried by mesoscale variability in the Antarctic Circumpolar Current

Satellite altimeter data collected by the Geosat Exact Repeat Mission were used to investigate turbulent stress resulting from the variability of surface geostrophic currents in the Antarctic Circumpolar Current. The altimeter measured sea level along the subsatellite track. The variability of the along-track slope of sea level is directly proportional to the variability of surface geostrophic currents in the cross-track direction. Because the grid of crossover points is dense at high latitudes, the satellite data could be used for mapping the temporal and spatial variability of the current. Two and a half years of data were used to compute the statistical structure of the variability. The statistics included the probability distribution functions for each component of the current, the time-lagged autocorrelation functions of the variability, and the Reynolds stress produced by the variability. The results demonstrate that stress is correlated with bathymetry. In some areas the distribution of negative stress indicate that eddies contribute to an acceleration of the mean flow, strengthening the hypothesis that baroclinic instability makes important contributions to strong oceanic currents.

Johnson, Thomas J.↗

Effect of altered 'weight' upon animal tolerance to restraint.

The effect of altered weight upon animal tolerance to restraint was determined by simulating various accelerative forces with directed lead weights using restrained and nonrestrained domestic fowl (chickens). Weighting (increased weight) and conterweighting (reduced weight) produced a stressed condition - reduced relative lymphocyte counts, loss of body mass, and/or the development of a disorientation syndrome - in both restrained and nonrestrained (caged only) birds. The animal's tolerance to altered weight appeared to be a function of its body weight. Unrestrained birds were stressed by counterweighting (mean plus or minus standard error) 58.3 plus or minus 41% of their body weight, whereas restrained birds tolerated only 32.2 plus or minus 2.6% reduction in body weight. A training regimen for restrained birds was not effective in improving their tolerance to a reduced weight environment. It was concluded that domestic fowl living in a weightless (space) environment should be restrained minimally and supported by ventrally directed tension equivalent to approximately 50% of their body mass (their weight in a 1 G environment).

Burton, R. R.↗

Dislocation dynamics and the viscoplastic buckling of dendritic web type silicon ribbon

The effect of dendrites (reinforced edges) on the residual stresses, dislocation densities and buckling behavior during growth of web type silicon ribbon is studied. A viscoplastic material response function (Haasen-Sumino model) is used to calculate the stresses and the disloction density at each point in the silicon ribbon. In addition, the role of dendrites on the viscoplastic buckling behavior of the ribbon is investigated. The critical thicknesses, the corresponding deflection shapes and lateral deflection speeds are calculated. These results are then compared with similar data obtained for flat plates.

Tsai, C. T.↗

Accelerated Testing Methodology in Constant Stress-Rate Testing for Advanced Structural Ceramics: A Preloading Technique

Preloading technique was used as a means of an accelerated testing methodology in constant stress-rate ('dynamic fatigue') testing for two different brittle materials. The theory developed previously for fatigue strength as a function of preload was further verified through extensive constant stress-rate testing for glass-ceramic and CRT glass in room temperature distilled water. The preloading technique was also used in this study to identify the prevailing failure mechanisms at elevated temperatures, particularly at lower test rate in which a series of mechanisms would be associated simultaneously with material failure, resulting in significant strength increase or decrease. Two different advanced ceramics including SiC whisker-reinforced composite silicon nitride and 96 wt% alumina were used at elevated temperatures. It was found that the preloading technique can be used as an additional tool to pinpoint the dominant failure mechanism that is associated with such a phenomenon of considerable strength increase or decrease.

Choi, Sung R.↗

Accelerated Testing Methodology in Constant Stress-Rate Testing for Advanced Structural Ceramics: A Preloading Technique

Preloading technique was used as a means of an accelerated testing methodology in constant stress-rate (dynamic fatigue) testing for two different brittle materials. The theory developed previously for fatigue strength as a function of preload was further verified through extensive constant stress-rate testing for glass-ceramic and CRT glass in room temperature distilled water. The preloading technique was also used in this study to identify the prevailing failure mechanisms at elevated temperatures, particularly at lower test rates in which a series of mechanisms would be associated simultaneously with material failure, resulting in significant strength increase or decrease. Two different advanced ceramics including SiC whisker-reinforced composite silicon nitride and 96 wt% alumina were used at elevated temperatures. It was found that the preloading technique can be used as an additional tool to pinpoint the dominant failure mechanism that is associated with such a phenomenon of considerable strength increase or decrease.

Choi, Sung R.↗

Neuroimmune responses to space radiation

One of the main health risks in human deep space exploration is central nervous system (CNS) damage by ionizing radiation due to exposure to galactic cosmic rays (GCRs). In animal models, irradiation with simulated GCRs or their components has been shown to cause neurodegeneration and neuroinflammation associated with cognitive and behavioral dysfunction. The extent of CNS damage is partially mediated by the blood-brain barrier (BBB), which regulates the interaction between CNS and systemic responses to stressors in the rest of the body. The main cellular regulators of BBB permeability are astrocytes, which also modulate neuronal death, neuroinflammation and oxidative stress. However, studies on BBB and astrocyte functions in regulating CNS responses to ionizing radiation have been limited, especially in human tissue/organ analogs. Therefore, we developed a high-throughput 3D organ-on-a-chip system to study human CNS and BBB impairments caused by deep space radiation. We investigated both immediate and delayed CNS responses to major GCR components: 0.3-0.8Gy 600MeV/n 56Fe ions; as well as to 0.5-1Gy X-rays. We observed ionizing radiation-mediated increases in BBB permeability that was exacerbated by astrocyte presence and accompanied by damage to endothelial cells and tight junctions, altered cytokine expression including TNFalpha upregulation, and increased oxidative stress. In particular, 600MeV/n 56Fe particle irradiation selectively induced astrocyte damage and increased blood-brain barrier permeability only in models that contained astrocytes in addition to endothelial cells, indicating astrocytes as a particularly radiosensitive component of the CNS that could therefore be a suitable a target for neuroprotection. Future studies will compare human and mouse CNS model responses to simulated GCRs and evaluate the induction of an anti-inflammatory phenotype in astrocytes as a potential countermeasure. Furthermore, in our lab we have been exploring the individual variability, genomic associations and secreted biomarkers of responses to space radiation, which could eventually be combined to address personalized CNS health risk and develop individual countermeasures. Ultimately, we aim to expand upon these results to uncover novel cellular and mechanistic targets for countermeasure development to mitigate human CNS damage in deep space exploration.

space radiation↗

Neurovascular Outcomes of Space Radiation in Human Blood-Brain Barrier Models

One of the main health risks in human deep space exploration is central nervous system (CNS) damage by ionizing radiation due to exposure to galactic cosmic rays (GCRs). In animal models, irradiation with simulated GCRs or their components has been shown to cause neurodegeneration and neuroinflammation associated with cognitive and behavioral dysfunction. The extent of CNS damage is partially mediated by the blood-brain barrier (BBB), which regulates the interaction between CNS and systemic responses to stressors in the rest of the body. The main cellular regulators of BBB permeability are astrocytes, which also modulate neuronal death, neuroinflammation and oxidative stress. However, studies on BBB and astrocyte functions in regulating CNS responses to ionizing radiation have been limited, especially in human tissue/organ analogs. Therefore, we developed a high-throughput 3D organ-on-a-chip system to study human CNS and BBB impairments caused by deep space radiation. We investigated both immediate and delayed CNS responses to major GCR components: 0.15-0.5Gy 250MeV/n 4He and 0.3-0.8Gy 600MeV/n 56Fe; as well as to 0.5-1Gy X-rays. We observed ionizing radiation-mediated increases in BBB permeability that was exacerbated by astrocyte presence and accompanied by damage to endothelial cells and tight junctions, altered cytokine expression including TNFalpha upregulation, and increased oxidative stress. In particular, 600MeV/n 56Fe particle irradiation selectively induced astrocyte damage and increased blood-brain barrier permeability only in models that contained astrocytes in addition to endothelial cells, indicating astrocytes as a particularly radiosensitive component of the CNS that could therefore be a suitable a target for neuroprotection. Future studies will compare human and mouse CNS model responses to simulated GCRs and evaluate the induction of an anti-inflammatory phenotype in astrocytes as a potential countermeasure. Ultimately, we aim to expand upon these results to uncover novel cellular and mechanistic targets for countermeasure development to mitigate human CNS damage in deep space exploration.

centrat nervous system↗