Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STARK EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Peculiarities of the nonlinear absorption of colloidal solutions of CdSe/ZnS quantum dots under stationary single-photon excitation of excitons

Peculiarities of the nonlinear absorption of a colloidal solution of CdSe/ZnS quantum dots with various sizes under resonant stationary excitation of the ground electron–hole (exciton) transition have been revealed by the pump and probe technique. The detected peculiarities of the nonlinear change in absorption are explained by the coexistence and competition of the effects of state filling and charge-induced Stark and temperature long-wavelength shift of the absorption spectra.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Upper limit for the effect of elastic bending stress on the saturation magnetization of L a 0.8 S r 0.2 Mn O 3

In this study, using polarized neutron reflectometry, we measured the influence of elastic bending stress on the magnetization depth profile of a La 0.8 Sr 0.2 MnO 3 (LSMO) epitaxial film grown on a SrTiO 3 substrate. The elastic bending strain of ±0.03% has no obvious effect on the magnetization depth profile at saturation. This result is in stark contrast to that of (La 1-x Pr x )1-yCayMnO 3 (LPCMO) films for which strain of ±0.01% produced dramatic changes in the magnetization profile and Curie temperature. We attribute the difference between the influence of strain on the saturation magnetization in LSMO (weak or none) and LPCMO (strong) to a difference in the ability of LSMO (weak or none) and LPCMO (strong) to phase separate. Our observation provides an upper limit of tuning LSMO saturation magnetization via elastic strain effect.

36 MATERIALS SCIENCE↗

Models of the Dynamics of Spatially Separated Broadband Electromagnetic Fields Interacting with Resonant Atoms

The Markov model of spontaneous emission of an atom localized in a spatial region with a broadband electromagnetic field with zero photon density is considered in the conditions of coupling of the electromagnetic field with the broadband field of a neighboring space. The evolution operator of the system and the kinetic equation for the atom are obtained. It is shown that the field coupling constant affects the rate of spontaneous emission of the atom, but is not manifested in the atomic frequency shift. The analytic expression for the radiative decay constant for the atom is found to be analogous in a certain sense to the expression for the decay constant for a singly excited localized ensemble of identical atoms in the conditions when the effect of stabilization of its excited state by the Stark interaction with the vacuum broadband electromagnetic field is manifested. The model is formulated based on quantum stochastic differential equations of the non- Wiener type and the generalized algebra of the Ito differential of quantum random processes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Visual Impact Assessment of the Energetic Materials Complex Construction Project on Manhattan Project–Era Historic Properties, the TA-06-0037 Concrete Bowl, and the TA-22-0001 Quonset Hut

Concern for potential visual effects to historic Manhattan Project–era properties emerged early in the planning and consultation phase for the upcoming Energetic Materials Complex (EMC) construction project. In initial discussions with project managers and design team members, resource managers became aware of the need to consider potential impacts to the viewsheds of two nearby properties that are eligible for inclusion in the Manhattan Project National Historical Park (MAPR). Resource managers recognized that viewshed characteristics important to the integrity of the Concrete Bowl (Technical Area [TA-]06-0037) and the Quonset Hut (TA-22-0001) conceivably faced the prospect of lasting and irreversible visual impacts. A strategy to gather necessary data soon emerged. The approach presented to the New Mexico State Historic Preservation Officer (SHPO) on April 7, 2021, combined gathering baseline information from field visits with a geographic information system (GIS)-supported viewshed analysis. Accordingly, results from the viewshed analysis would help resource managers determine if a more comprehensive visual impact assessment (VIA) would be needed. If necessitated by the outcome of the GIS viewshed analysis, initial consultation with the SHPO specified the production of a VIA that would explore any potential visual adverse impacts to the Concrete Bowl and the Quonset Hut. Cultural resources and GIS specialists with the Laboratory performed a viewshed analysis shortly after consultation with the SHPO. The analysis indicated a high likelihood that at least one of the two Manhattan Project–era properties would experience at least a minimal level of visual impact and that a VIA would be needed. The resulting analysis provides a description of the undertaking, an account of the properties affected along with an evaluation of historical significance, an examination of potential visual impacts, and a determination of effect to the identified historic properties.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

The Medium Sensitivity Survey and the X-ray selected quasar sample

Statistical investigations of X-ray-emitting quasars are reviewed, focusing on the possible incompleteness of the Einstein IPC Medium Sensitivity Survey (MSS) (Maccacaro et al., 1982; Stocke et al., 1983; Gioia et al., 1984). The criteria used in constructing the MSS and calculating the source parameters are discussed, and the corrections determined for each line of sight by Maccacaro and Gioia (1986) on the basis of the H I measurements of Stark et al. (1986) are shown to have no effect on the completeness of the MSS extragalactic sample as a whole and of the quasar sample in particular. Other possible reasons for inconsistencies between the MSS sample and optically selected quasar samples are considered; ongoing efforts to expand the MSS sample are described; and some preliminary results are presented in graphs.

Gioia, Isabella M.↗

Microbial Pigments and Their Degradation Products as Biosignatures

Carotenoids are a class of vibrant biological pigments that have a characteristic chemical structure centered around a polyene core (Lu et al. 2018). Carotenoids and their derivatives are candidate biosignatures because they can persist in the terrestrial geologic record for up to 1.73 billion years (Vinnichenko et al. 2020), have specific structures that are likely the result of complex pathways, mediate the survival of many microorganisms in Mars and Ocean Worlds analog environments, and are detectable with multiple techniques, including Raman spectroscopy. In this project, we aim to investigate the detectability of carotenoid pigments with different spectroscopic methods to inform future instrument selection. We compare the spectra of five unaltered carotenoids, two model compounds, and carotenoid-forming archaeon with visible and deep UV Raman spectroscopy and UVVis absorption spectrophotometry. We then use one model pigment, beta-carotene, to evaluate the likelihood that unique spectral properties of carotenoids, or their refractory byproducts, would be preserved and detectable on a remote planetary surface by exposing it to simulated conditions for Mars. Sample Acquisition. Pigments betacarotene, lutein, zeaxanthin, astaxanthin, and lycopene were purchased from Sigma Aldrich. Halobacterium salinarum NRC-1 was acquired from Carlina Biological and grown in Halobacterium media. Mineral salts including sodium sulfate, sodium carbonate, and halite were used to form matrices in which the beta-carotene was embedded before exposure. Pigment-mineral mixes were at a 1:10 ratio in water. Analytical Techniques. Deep UV Raman data were collected on a custom laboratory mapping spectrometer called MOBIUS (Mineral and Organic Based Investigations using Ultraviolet Spectroscopy), which is an analog to the SHERLOC instrument on the Mars 2020 Perseverance rover (Bhartia et al. 2021). It features a 248.56 nm NeCu pulsed laser, liquid nitrogen-cooled detector, and tunable optical setup. Visible Raman data were collected using a Horiba Jobin Yvon LabRam HR spectrometer with a frequencydoubled Nd:YAG laser (532 nm) and a HeNe laser (633 nm). A VWR 6300 PC UV/Visible Spectrophotometer was used to collect absorption data for carotenoid solutions, model compounds, and solvents in UVpermissible capped cuvettes. Data were collected from 190-1100 nm at 1 nm increments. All spectral data were analyzed using Igor Pro 9 (Wavemetrics). Irradiation. We used a vacuum chamber equipped with a cryostat and a flood electron gun to simulate Martian surface temperatures, low pressures, and ionizing radiation (10keV, 10μA for 6h at 200K for our initial tests). The samples were prepared by drying the pigment-mineral mix onto polished metal tabs, then mounted on the cryostat for processing. Samples were then analyzed directly on the tabs after exposure. Results: In comparing the visible and deep UV Raman spectra of unaltered pigments, we found that they differed drastically. Carotenoids are often studied with visible Raman and typically have peaks at 1525 cm-1 and 1157 cm-1, due to the stretching of the C=C and C-C bonds in the polyene structure. However, in deep UV, the strongest feature is at ~1630 cm-1 and is broad, possibly indicating that multiple peaks are forming this feature. This stark difference is likely due to different preresonant enhancement effects. The UV-Vis results show that there is an absorption band in the deep UV <300 nm, which supports the hypothesis that the 248.6 nm excitation is interrogating another aspect of carotenoids than visible Raman. Our preliminary exposure tests indicated that pigments – even without minerals present - were largely unaltered in the applied conditions, with only a slight broadening in the primary polyene peaks apparent in the visible Raman data. Figure 1. A) Visible vs. deep UV Raman spectra of unaltered beta carotene. B) Schematic of exposure. Conclusions: Our results to date indicate that deep UV and visible Raman spectroscopy, both techniques with planetary mission heritage from Mars 2020 (Wiens et al. 2021, Bhartia et al. 2021), may be used in a complementary manner to observe carotenoids. In addition, we find that beta-carotene is largely resistant to our current exposure conditions, though there may be some amount of amorphization of the material which could cause the broadening of the peaks at 1525 and 1157 cm-1. As a next step, we aim to increase the dosage and duration of exposure to observe degradation of the parent pigment, possibly add UV as a factor via an Ar mini-arc UV lamp and use GC-MS to characterize possible degradation products.

pigments↗

Valley-dependent exciton fine structure and Autler–Townes doublets from Berry phases in monolayer MoSe 2

The Berry phase of Bloch states can have profound effects on electron dynamics and lead to novel transport phenomena, such as the anomalous Hall effect and the valley Hall effect. Recently, it was predicted that the Berry phase effect can also modify the exciton states in transition metal dichalcogenide monolayers, and lift the energy degeneracy of exciton states with opposite angular momentum through an effective valley-orbital coupling. Here, we report the observation and control of the Berry phase-induced splitting of the 2p exciton states in monolayer molybdenum diselenide (MoSe 2 ) using the intraexciton optical Stark spectroscopy. We observe the time-reversal-symmetric analogue of the orbital Zeeman effect resulting from the valley-dependent Berry phase, which leads to energy difference of +14 (-14) meV between the 2p+ and 2p- exciton states in the K (K') valley, consistent with the ordering from our ab initio GW-Bethe–Salpeter equation results. In addition, we show that the light–matter coupling between intraexciton states is remarkably strong, leading to a prominent valley-dependent Autler–Townes doublet under resonant driving. Finally, our study opens up pathways to coherently manipulate the quantum states and excitonic excitation with infrared radiation in two-dimensional semiconductors.

36 MATERIALS SCIENCE↗

Spectroscopic analysis on the basis Judd–Ofelt theory of Nd{sup 3+} in (Y{sub 0.985}Nd{sub 0.015}){sub 2}O{sub 3}: A transparent laser-host ceramic

Highlights: • Transparent Y{sub 2}O{sub 3} ceramic with 1.5 atm% doping of neodymium (Nd) was fabricated and its spectroscopic properties were investigated using Judd–Ofelt theory. • The Judd–Oflet parameters, computed from the absorption bands of Nd{sup 3+} ion, are Ω{sub 2} = 8.84 × 10{sup −20} cm{sup 2}, Ω{sub 4} = 9.82 × 10{sup −20} cm{sup 2} and Ω{sub 6} = 4.44 × 10{sup −20} cm{sup 2}. These parameters were used to determine absorption line strength, radiative transition probabilities, fluorescence branch ratio and radiative lifetime for different transitions of Nd{sup 3+}. • The branching ratios for {sup 4}F{sub 3/2} → {sup 4}I{sub 9/2} and {sup 4}F{sub 3/2} → {sup 4}I{sub 11/2} transition are 0.548 and 0.389, respectively. The spectroscopic quality factor was determined to be 2.21, which is higher than 1.0 atm% neodymium doped Y{sub 2}O{sub 3} ceramic. A calculated radiation decay time (τ = 140 μs) is reasonably close to the experimentally measured life time (153 μs). The life time for 1.5 mol% Nd doped Y{sub 2}O{sub 3} ceramic which is lower than that of 1.0 atm% neodymium doped ceramic. The lowering of life time was attributed to the presence of concentration quenching effects. • The room temperature emission cross-section for individual Stark bands of {sup 4}F{sub 3/2} → {sup 4}I{sub 9/2} and {sup 4}F{sub 3/2} → {sup 4}I{sub 11/2} transitions was determined. The total emission cross section for {sup 4}F{sub 3/2} → {sup 4}I{sub 9/2} and {sup 4}F{sub 3/2} → {sup 4}I{sub 11/2} transition was found to be 25.49 × 10{sup −20} and 37.04 × 10{sup −20} cm{sup 2}, which is significantly higher than 1.0 atm% Nd{sup 3+} doped Y{sub 2}O{sub 3}ceramic. - Abstract: Spectroscopic investigation of 1.5 atm% Nd{sup 3+} doped Y{sub 2}O{sub 3} transparent ceramic was performed for different emission wavelengths. Judd–Oflet parameters, computed from the absorption bands of Nd{sup 3+} ion, are Ω{sub 2} = 8.84 × 10{sup −20} cm{sup 2}, Ω{sub 4} = 9.82 × 10{sup −20} cm{sup 2} and Ω{sub 6} = 4.44 × 10{sup −20} cm{sup 2}. These parameters were used to determine absorption line strength, radiative transition probabilities, fluorescence branch ratio and radiative lifetime for different transitions of Nd{sup 3+}. The branching ratios for {sup 4}F{sub 3/2} → {sup 4}I{sub 9/2} and {sup 4}F{sub 3/2} → {sup 4}I{sub 11/2} transition are 0.548 and 0.389, respectively. The calculated radiative lifetime (140 μs) is in good agreement with the measured lifetime (153 μs). The room temperature emission cross-section of individual Stark bands of {sup 4}F{sub 3/2} → {sup 4}I{sub 9/2} and {sup 4}F{sub 3/2} → {sup 4}I{sub 11/2} transitions was determined. The total emission cross section for {sup 4}F{sub 3/2} → {sup 4}I{sub 9/2} and {sup 4}F{sub 3/2} → {sup 4}I{sub 11/2} transition was found to be 25.49 × 10{sup −20} and 37.04 × 10{sup −20} cm{sup 2}, which is significantly higher than 1.0 atm% Nd{sup 3+} doped Y{sub 2}O{sub 3}ceramic.

36 MATERIALS SCIENCE↗

Electric-field control of tri-state phase transformation with a selective dual-ion switch

Materials can be transformed from one crystalline phase to another by using an electric field to control ion transfer, in a process that can be harnessed in applications such as batteries, smart windows and fuel cells. Increasing the number of transferrable ion species and of accessible crystalline phases could in principle greatly enrich material functionality. However, studies have so far focused mainly on the evolution and control of single ionic species (for example, oxygen, hydrogen or lithium ions). In this paper, we describe the reversible and non-volatile electric-field control of dual-ion (oxygen and hydrogen) phase transformations, with associated electrochromic and magnetoelectric effects. We show that controlling the insertion and extraction of oxygen and hydrogen ions independently of each other can direct reversible phase transformations among three different material phases: the perovskite SrCoO 3-δ , the brownmillerite SrCoO 2.5 , and a hitherto-unexplored phase, HSrCoO 2.5 . By analysing the distinct optical absorption properties of these phases, we demonstrate selective manipulation of spectral transparency in the visible-light and infrared regions, revealing a dual-band electrochromic effect that could see application in smart windows. Moreover, the starkly different magnetic and electric properties of the three phases—HSrCoO 2.5 is a weakly ferromagnetic insulator, SrCoO 3-δ is a ferromagnetic metal, and SrCoO 2.5 is an antiferromagnetic insulator—enable an unusual form of magnetoelectric coupling, allowing electric-field control of three different magnetic ground states. Finally, these findings open up opportunities for the electric-field control of multistate phase transformations with rich functionalities.

36 MATERIALS SCIENCE↗

Intrinsic exchange biased anomalous Hall effect in an uncompensated antiferromagnet MnBi 2 Te 4

Achieving spin-pinning at the interface of hetero-bilayer ferromagnet/antiferromagnet structures in conventional exchange bias systems can be challenging due to difficulties in interface control and the weakening of spin-pinning caused by poor interface quality. In this work, we propose an alternative approach to stabilize the exchange interaction at the interface of an uncompensated antiferromagnet by utilizing a gradient of interlayer exchange coupling. We demonstrate this exchange interaction through a designed field training protocol in the odd-layer topological antiferromagnet MnBi 2 Te 4 . Our results reveal a remarkable field-trained exchange bias of up to ~ 400 mT, which exhibits high repeatability and can be easily reset by a large training field. Notably, this field-trained exchange bias effect persists even with zero-field initialization, presenting a stark contrast to the traditional field-cooled exchange bias. The highly tunable exchange bias observed in this single antiferromagnet compound, without the need for an additional magnetic layer, provides valuable insight into the exchange interaction mechanism. These findings pave the way for the systematic design of topological antiferromagnetic spintronics.

36 MATERIALS SCIENCE↗

Giant burst of impact ionization in a p-n junction of the 6H-SiC polytype

A study of the electron component of impact ionization in the p{sup +}-n{sup -}-n{sup +} junction in the 6HSiC polytype made it possible to detect a giant burst of impact ionization and origination of an extra early avalanche breakdown. The electric field of this breakdown is lower by {approx}20% than the electric field of the breakdown arising as a result of a steady development of the impact ionization. It is of interest that this phenomenon occurs abruptly, without any apparent causes, in particular, without an increase in the dark current characteristic of a prebreakdown state of the p-n junction. Conditions for origination of an unusual breakdown and its properties made it possible to assume that there are nonlinear processes that give rise to a streamer. In the p-n junction plane, the anomalous breakdown is seen as a narrow glowing track with a width of {approx}10 {mu}m. This effect takes place in the conditions of the Wannier-Stark ladder of states. The latter can stimulate a local accumulation of charge and formation of a streamer structure.

36 MATERIALS SCIENCE↗

A MILP-Based Distribution Optimal Power Flow Model for Microgrid Operation

This paper proposes a distribution optimal power flow (D-OPF) model for the operation of microgrids. The proposed model minimizes not only the operating cost, including fuel cost, purchasing cost and demand charge, but also several performance indices, including voltage deviation, network power loss and power factor. It co-optimizes the real and reactive power form distributed generators (DGs) and batteries considering their capacity and power factor limits. The D-OPF is formulated as a mixed-integer linear programming (MILP). Numerical simulation results show the effectiveness of the proposed model.

distributed generators↗

Revisiting the Stark Width and Shift of He II Pα

We report experimental determination of plasma-induced Stark widths and shifts of the He II P α line and a comparison of the results with calculations performed by several computational approaches. The measurements were carried out in a small compressing plasma channel device, reaching electron densities in excess of 10 18 cm –3 and temperatures of a few eV. The experimental data are in a good agreement with some previously published studies. However, the measured relation between the Stark shift and width could not be reproduced by either of the codes, and this disagreement is not yet resolved. Furthermore this suggests the existence of an additional effect that is not accounted for in the present models and leads to a larger than expected Stark shift of the He II P α line.

74 ATOMIC AND MOLECULAR PHYSICS↗

A direct route for the investigation of crystalline field effects on the spectral properties of Eu{sup 3+} ions in designed nanostructures

The spectral properties of lanthanide ions doped in a solid-state matrix, especially the Stark splitting and emission shifts, are strongly influenced by the local crystalline field. Here, we use a direct approach to quantitatively investigate the crystalline field effect on these spectral properties of Eu{sup 3+} ions in our designed β-PbF{sub 2}:Eu{sup 3+} and BaF{sub 2}:Eu{sup 3+} nanostructures. The extremely similar structures in which the central Eu{sup 3+} ions have the same site symmetry allow the local crystalline field to be simplified as the same point charge electrostatic field model. In this model, the direction and intensity of the electrostatic field are related to the distortion and expansion degree of the charge cloud of the luminescent center, respectively, and further determine the Stark splitting and emission shift. The theoretical analysis and charge-cloud stimulations were in good agreement with the experimental results. The direction and intensity of the crystalline field were calculated, and showed that the emission spectra shift to red with the increase in intensity. This work provides a comprehensive understanding of the spectral changes induced by a crystalline field, which is of great significance for the design of materials with the desired spectral properties.

36 MATERIALS SCIENCE↗

Loading of bosons in optical lattices into the p band

We present a method for transferring bosonic atoms residing on the lowest s band of an optical lattice to the first excited p bands. Our idea hinges on resonant tunneling between adjacent sites of accelerated lattices. The acceleration effectively shifts the quasibound energies on each site such that the system can be cast into a Wannier-Stark ladder problem. By adjusting the acceleration constant, a situation of resonant tunneling between the s and p bands is achievable. Within a mean-field model, considering {sup 87}Rb atoms, we demonstrate population transfer from the s to the p bands with around 95% efficiency. Nonlinear effects deriving from atom-atom interactions, as well as coupling of the quasibound Wannier-Stark states to the energy continuum, are considered.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigation of UV, ns-laser damage resistance of hafnia films produced by electron beam evaporation and ion beam sputtering deposition methods

Laser-induced damage in coating materials with a high index of refraction, such as hafnia, limits the performance of high power and high energy laser systems. Understanding the underlying physics responsible for laser damage holds the key for developing damage-resistant optical films. Previous studies have reported a substantial difference in laser damage onset for hafnia films produced by different deposition methods, yet the underlying mechanisms for the observed difference remain elusive. We combined laser damage testing with analytical characterizations and theoretical simulations to investigate the response of hafnia films produced by electron (e-) beam evaporation vs ion beam sputtering (IBS) methods upon UV ns-laser exposure. We found that e-beam produced hafnia films were overall more damage resistant; in addition, we observed a polarization anisotropy associated with the onset of damage in the e-beam films, while this effect was absent in the latter films. The observed differences can be attributed to the stark contrast in the pressure inside the pores inherent in both films. The high pressure inside the IBS-induced nanobubbles has been shown to reduce the threshold for laser-induced plasma breakdown leading to film damage. The polarization effects in the e-beam coatings can be related to the asymmetric electric field intensification induced by the columnar void structure. Our findings provide a fundamental basis for developing strategies to produce laser damage-resistant coatings for UV pulsed laser applications.

36 MATERIALS SCIENCE↗

Effects on precipitation, clouds, and temperature from long‐range transport of idealized aerosol plumes in WRF‐Chem simulations

Using the Weather Research and Forecasting model with Chemistry (WRF-Chem), we explored the impacts of nonlocal aerosol plumes transported at three different altitudes on a summertime convective system developed in a clean environment over the northeastern United States. Idealized aerosol plumes from forest fire and volcano emissions, which are known to be frequently transported in this region, were prescribed at three separate altitudes on the upstream boundary of WRF-Chem. The low-altitude (1.5–2.5 km) plume characteristic of forest fire emissions intersects the water clouds, resulting in optically thicker clouds and about a 30% decrease in accumulated precipitation. The precipitation response to the idealized aerosol plume is attributed to the aerosol “second indirect effect” and aerosol-induced enhancement in evaporation efficiency. Convection also significantly impacted this low-altitude aerosol plume because wet removal scavenges up to 70% of plume aerosols over regions where deep convection and precipitation occur. In stark contrast, midaltitude (5.6–6.6 km) and high-altitude (11.5–12.5 km) plumes exerted a negligible effect on clouds and precipitation. The apparent highly nonlinear sensitivity of simulated convection to the vertical positioning of nonlocal aerosol plumes is explained in terms of the dominant controls influencing this convection regime and limitations in the microphysics currently implemented in WRF-Chem.

54 ENVIRONMENTAL SCIENCES↗

EQSIM and RAJA: Enabling Exascale Predictions of Earthquake Effects on Critical Infrastructure

Nearly 120 years ago, the great “San Francisco” earthquake of 1906 provided a stark and sobering view of the havoc that can be caused by the sudden and violent movement of Earth’s tectonic plates. According to USGS, the rupture along the San Andreas fault extended 296 miles (447 kilometers) and shook so violently that the motion could be felt as far north as Oregon and east into Nevada. The estimated 7.9-magnitude quake and subsequent fires decimated the major metropolis and surrounding areas: buildings turned to ruins, hundreds of thousands of people left homeless, and a death toll exceeding 3,000. Today, as evidenced by the catastrophic 7.8-magnitude earthquake that struck Turkey in February of 2023, large earthquakes still present a significant potential danger to life and economic security as researchers work to develop ways to better understand earthquake phenomena and quantify associated risks.

42 ENGINEERING↗