Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SPEAR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

The Mars Pathfinder Mission

On July 4th, 1997, Mars Pathfinder became the third spacecraft to successfully land on the planet Mars. The mission's primary objective was to demonstrate a low-cost system for delivering a small science payload to the surface of Mars, and to test the operation of a rover.

composition↗

Back to Mars: The Mars Pathfinder Mission

Mars Pathfinder successfully landed on the surface of Mars on July 4, 1997, and ushered in a new era in Mars exploration. This era will feature numberous low cost missions which will perform important science investigations and engage the world's population in the excitement of planetary exploration.

Mars↗

Mars Pathfinder Project Progress Report

This paper reports on thestatus of Mars Pathfinder's drive to space qualify its flight system for launch on December 2, 1996 under a cost cap- in particular how the project is dealing with qualification fo its entry, descent and landing event and the surface operations phase as well as the normal launch and space flight phases. It also reports on its landing site selection and science plan.

Mars↗

Progress Report on Mars Pathfinder Project Approach

Mars Pathfinder, launching on December 2, 1996 and landing on Mars on July 4, 1997, will demonstrate a low-cost delivery system to the surface of Mars. Historically, spacecraft that orbit or land on a distant body carry massive amounts of fuel for braking at the planet. Pathfinder requires fuel only to navigate to Mars; the spacecraft aerobrakes into the Mars atmosphere directly from Earth-Mars transfer trajectory, deploys a parachute at 10 km above the surface and, within 100 m of the surface, fires solid rockets for final braking prior to deployment of airbags that cushion touchdown. After landing, petals open to upright the lander, followed by deployment of a small rover and several science instruments.

Mars↗

Mars Pathfinder Science Investigations and Objectives

Pathfinder's primary ojective is to demonstrate an inexpensive system for curise, entry, descent, and landing on mars. Additional objective include the deployent and operation of various science instruments: a stereoscopic imager with filters on a pop up mast, and alpha proton x-ray spectometer (APXS), and an atmospheric structure instrument/meteorology package

Mars↗

Mesur Pathfinder: Steps Toward U.S. Return To The Surface Of Mars

The Mars Environmental Survey (MESUR) project has been established to deliver and emplace a network of small landers on Mars. A key requisite for this mission is the development of a low cost, simple, robust delivery system for payloads to the Martian surface.

Mars↗

Foam vessel for cryogenic fluid storage

Cryogenic storage and separator vessels made of polyolefin foams are disclosed, as are methods of storing and separating cryogenic fluids and fluid mixtures using these vessels. In one embodiment, the polyolefin foams may be cross-linked, closed-cell polyethylene foams with a density of from about 2 pounds per cubic foot to a density of about 4 pounds per cubic foot.

47 OTHER INSTRUMENTATION↗

Design calculations for NIF convergent ablator experiments.

Design calculations for NIF convergent ablator experiments will be described. The convergent ablator experiments measure the implosion trajectory, velocity, and ablation rate of an x-ray driven capsule and are a important component of the U. S. National Ignition Campaign at NIF. The design calculations are post-processed to provide simulations of the key diagnostics: (1) Dante measurements of hohlraum x-ray flux and spectrum, (2) streaked radiographs of the imploding ablator shell, (3) wedge range filter measurements of D-He3 proton output spectra, and (4) GXD measurements of the imploded core. The simulated diagnostics will be compared to the experimental measurements to provide an assessment of the accuracy of the design code predictions of hohlraum radiation temperature, capsule ablation rate, implosion velocity, shock flash areal density, and x-ray bang time. Post-shot versions of the design calculations are used to enhance the understanding of the experimental measurements and will assist in choosing parameters for subsequent shots and the path towards optimal ignition capsule tuning.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Observation of Beam ION Instability in Spear3

Weak vertical coupled bunch instability with oscillation amplitude at {mu}m level has been observed in SPEAR3. The instability becomes stronger when there is a vacuum pressure rise by partially turning off vacuum pumps and it becomes weaker when the vertical beam emittance is increased by turning off the skew quadrupole magnets. These confirmed that the instability was driven by ions in the vacuum. The threshold of the beam ion instability when running with a single bunch train is just under 200 mA. This paper presents the comprehensive observations of the beam ion instability in SPEAR3. The effects of vacuum pressure, beam current, beam filling pattern, chromaticity, beam emittance and bunch-by-bunch feedback are investigated in great detail. In an electron accelerator, ions generated from the residual gas molecules can be trapped by the beam. Then these trapped ions interact resonantly with the beam and cause beam instability and emittance blow-up. Most existing light sources use a long single bunch train filling pattern, followed by a long gap to avoid multi-turn ion trapping. However, such a gap does not preclude ions from accumulating during one passage of the single bunch train beam, and those ions can still cause a Fast Ion Instability (FII) as predicted by Raubenheimer and Zimmermann. FII has been observed in ALS, and PLS by artificially increasing the vacuum pressure by injecting helium gas into the vacuum chamber or by turning off the ion pumps in order to observe the beam ion instability. In some existing rings, for instance B factory, the beam ion instability was observed at the beginning of the machine operation after a long period of shutdown and then it automatically disappeared when the vacuum was better. However, when the beam emittance becomes smaller, the FII can occur at nominal conditions as observed in PLS, SOLEIL and SSRF. This paper reports the observations of beam ion instabilities in SPEAR3 under different condition during a period of one year, which includes single bunch train instability (FII) and multi-bunch train instability. Note that the instability may be not the same even with the same beam due to the change of the vacuum with time. SPEAR3 has a circumference of 234 m with a harmonic number of 372. SPEAR3 runs with six bunch train filling pattern in order to suppress the possible beam ion instability. Table 1 lists the main parameters of SPEAR3. The vacuum of SPEAR3 ranges from 0.1 to 0.5 nTorr, which varies from section to section.

43 PARTICLE ACCELERATORS↗

Comparison of Nonlinear Model Results Using Modified Recorded and Synthetic Ground Motions

A study has been performed that compares results of nonlinear model runs using two sets of earthquake ground motion time histories that have been modified to fit the same design response spectra. The time histories include applicable modified recorded earthquake ground motion time histories and synthetic ground motion time histories. The modified recorded earthquake ground motion time histories are modified from time history records that are selected based on consistent magnitude and distance. The synthetic ground motion time histories are generated using appropriate Fourier amplitude spectrums, Arias intensity, and drift correction. All of the time history modification is performed using the same algorithm to fit the design response spectra. The study provides data to demonstrate that properly managed synthetic ground motion time histories are reasonable for use in nonlinear seismic analysis.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

TREC 2010 legal track: method and results of the ELK collaboration

The ELK team ([E]WA-IIT, [L]os Alamos National laboratory (LANL), and [K]ayvium Corporation (ELK)) used the legal Track task 302 as an opportunity to compare and integrate advanced semantic-automation strategies. The team members believe that enabling parties to discover, consume, analyze, and make decisions in a noisy and information-overloaded environment requires new tools. Together, as well as independently, they are actively developing these tools and view the TREC exercise as an opportunity to test, compare, and complement tools and approaches. Our collaboration is new to TREC, brought together by a shared interest in document relevance, concept-in-context identification and annotation, and the recognition that words out-of-context do not a match make. The team's intent was to lay the foundation for automating the mining and analysis of large volumes of electronic information by litigants and their lawyers, not only in the context of document discovery, but also to support litigation strategy, motion practice, deposition, trial tactics, etc. The premise was that a Subject Matter Expert- (SME-) built model can be automatically mapped onto various search engines for document retrieval, organization, relevance scoring, analysis and decision support. In the end, we ran nearly a dozen models, mostly, but not exclusively, with Kayvium Corporation's knowledge automation technology. The Sal Database Search Engine we used had a bug in its proximity feature, requiring that we develop a workaround. While the work-around was successful, it left us with insufficient time to converge the models to achieve expected quality. However, with optimized proximity processing in place, we would be able to run the model many more times, and believe repeatable quality would be a matter of working through a few requests to get the approach right. We believe that with more time, the results we would achieve might point towards a new way of processing documents for litigation support, so litigators can be confident that results are complete but not overly inclusive.

97 MATHEMATICS AND COMPUTING↗

Neutron spectrometry - An essential tool for diagnosing implosions at the National Ignition Facility

DT neutron yield (Y{sub n}), ion temperature (T{sub i}) and down-scatter ratio (dsr) determined from measured neutron spectra are essential metrics for diagnosing the performance of Inertial Confinement Fusion (ICF) implosions at the National Ignition Facility (NIF). A suite of neutron-Time-Of-Flight (nTOF) spectrometers and a Magnetic Recoil Spectrometer (MRS) have been implemented in different locations around the NIF target chamber, providing good implosion coverage and the redundancy required for reliable measurements of Yn, Ti and dsr. From the measured dsr value, an areal density ({rho}R) is determined from the relationship {rho}R{sub tot} (g/cm{sup 2}) = (20.4 {+-} 0.6) x dsr{sub 10-12 MeV}. The proportionality constant is determined considering implosion geometry, neutron attenuation and energy range used for the dsr measurement. To ensure high accuracy in the measurements, a series of commissioning experiments using exploding pushers have been used for in situ calibration. The spectrometers are now performing to the required accuracy, as indicated by the good agreement between the different measurements over several commissioning shots. In addition, recent data obtained with the MRS and nTOFs indicate that the implosion performance of cryogenically layered DT implosions, characterized by the experimental Ignition Threshold Factor (ITFx) which is a function of dsr (or fuel {rho}R) and Y{sub n}, has improved almost two orders of magnitude since the first shot in September, 2010.

42 ENGINEERING↗