Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SILICATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Crystal structure of britvinite [Pb{sub 7}(OH){sub 3}F(BO{sub 3}){sub 2}(CO{sub 3})][Mg{sub 4.5}(OH){sub 3}(Si{sub 5}O{sub 14})]: A new layered silicate with an original type of silicon-oxygen networks

The crystal structure of a new mineral britvinite Pb{sub 7.1}Mg{sub 4.5}(Si{sub 4.8}Al{sub 0.2}O{sub 14})(BO{sub 3})(CO{sub 3})[(BO{sub 3}){sub 0.7}(SiO{sub 4}){sub 0.3}]= (OH, F){sub 6.7} from the Langban iron-manganese skarn deposit (Vaermland, Sweden) is determined at T = 173 K using X-ray diffraction (Stoe IPDS diffractometer, {lambda}MoK{alpha}, graphite monochromator, 2{theta}{sub max} = 58.43{sup o}, R = 0.052 for 6262 reflections). The main crystal data are as follows: a = 9.3409(8) A, b = 9.3579(7) A, c = 18.8333(14) A, {alpha} = 80.365(6) deg., {beta} = 75.816(6) deg., {gamma} = 59.870(5) deg., V = 1378.7(2) A{sup 3}, space group P1, Z = 2, and {rho}{sub calcd} = 5.42 g/cm{sup 3}. The idealized structural formula of the mineral is represented as [Pb{sub 7}(OH){sub 3}F(BO{sub 3}){sub 2}(CO{sub 3})][Mg{sub 4.5}(OH){sub 3}(Si{sub 5}O{sub 14})]. It is demonstrated that the mineral britvinite is a new representative of the group of mica-like layered silicates with structures in which three-layer (2: 1) 'sandwiches' composed of tetrahedra and octahedra alternate with blocks of other compositions, such as oxide, oxide-carbonate, oxide-carbonate-sulfate, and other blocks. The tetrahedral networks (Si{sub 5}O{sub 14}){sub {infinity}}{sub {infinity}} consisting of twelve-membered rings are fragments of the britvinite structure. Similar networks also form crystal structures of the mineral zeophyllite and the synthetic phase Rb{sub 6}Si{sub 10}O{sub 23}. In the crystal structures under consideration, the tetrahedral networks differ in the rotation of tetrahedra with respect to the layer plane.

36 MATERIALS SCIENCE↗

Distributions of Ag, Bi, and Sb as Minor Elements between Iron-Silicate Slag and Copper in Equilibrium with Tridymite in the Cu-Fe-O-Si System at T = 1250 °C and 1300 °C (1523 K and 1573 K)

New experimental data on the distributions of silver (Ag), bismuth (Bi), and antimony (Sb) between liquid iron-silicate slag and liquid copper metal in equilibrium with tridymite in the Cu-Fe-O-Si system at T = 1250 °C and 1300 °C (1523 K and 1573 K) have been obtained. The experimental methodology involved high-temperature equilibration, rapid quenching of the equilibrated phases, followed by direct measurement of the equilibrium phases with electron probe X-ray microanalysis (EPMA) for measurement of major element concentrations and laser ablation inductively coupled plasma mass spectrometry (LAICPMS) for the measurement of minor element concentrations. The 4-point test approach was employed to confirm the achievement of chemical equilibrium in the current study. Open-system equilibration on quartz substrates in controlled gas atmospheres (CO/CO{sub 2}/Ar) and closed-system equilibration in sealed quartz ampoules were used. The new experimental data resolve significant discrepancies found in previous studies and can be used as input for the development of thermodynamic databases for copper-making processes.

36 MATERIALS SCIENCE↗

Assessing the Influence of NaCl on the Reduction of a Siliceous Laterite Nickel Ore Under Caron Process Conditions

The reduction by hydrogen and the thermal decomposition of a siliceous nickel laterite ore in the presence of NaCl were studied using thermogravimetric analysis (TGA). Reduction tests on H{sub 2} atmosphere in rotary kiln were performed in the presence of NaCl and the product of the reaction was leached in ammoniacal solution. The presence of only 1 pct of NaCl in the furnace increased the nickel extraction values from ≈ 3 to ≈ 90 pct when the experiment was carried out at 850 °C. According to the results of X-ray diffractometry and TGA, the presence of NaCl in the system and the reducing atmosphere of H{sub 2} promote the segregation of nickel according to the following steps: (1) Nickel oxide reduction by hydrogen: NiO + H{sub 2(g)} → Ni + H{sub 2}O{sub (g)}. (2) Formation of HCl: Al{sub 2}SiO{sub 5} + 2NaCl + SiO{sub 2} + H{sub 2}O → 2HCl(g) + 2NaAlSiO{sub 4}. (3) Chlorination of metallic nickel by HCl: Ni + 2HCl{sub (g)} → NiCl{sub 2} + H{sub 2(g)}. (4) Reduction of nickel chloride by hydrogen: NiCl{sub 2} + H{sub 2(g)} → Ni + 2HCl{sub (g)}.

36 MATERIALS SCIENCE↗

The Electrochemical Corrosion Behavior of Plasma Electrolytic Oxidation Coatings Fabricated on Aluminum in Silicate Electrolyte

Plasma electrolytic oxidation (PEO) coatings were fabricated on the aluminum in silicate electrolyte. Microstructures and elemental compositions of these PEO coatings were examined by scanning electron microscopy (SEM) equipped with an energy-dispersive x-ray spectroscopy (EDS). Corrosion resistances of the coated samples were evaluated using the measurements of open-circuit potential (OCP), repetitive polarization and electrochemical impedance spectroscopy (EIS) in 3.5 wt.% NaCl solution. The results indicated that the PEO coatings not only act as a physical shield limiting the penetration of corrosive solution, but also establish an anodic location with high concentration of H{sup +} ions and other product ions as pitting corrosion begins. With the development of pitting corrosion, the accumulation of corrosion products inside the pits and pores of the coatings decreases the corrosion process effectively.

36 MATERIALS SCIENCE↗

Tricalcium silicate (C{sub 3}S) hydration under high pressure at ambient and high temperature (200 deg. C)

The hydration of a tricalcium silicate paste at ambient temperature and at 200 deg. C under high pressure (up to 1000 bar) has been studied. Two high pressure cells have been used, one allows in-situ electrical conductivity measurements during hydration under high pressure. The hydration products were characterized by thermal analysis, X-ray diffraction and {sup 29}Si NMR measurements. The pressure has a large kinetic effect on the hydration of a C{sub 3}S paste at room temperature. The pressure was seen to affect drastically the hydration of a C{sub 3}S paste at 200 deg. C and this study evidences the competition between the different high temperature phases during the hydration.

36 MATERIALS SCIENCE↗

The effect of pressure on tricalcium silicate hydration at different temperatures and in the presence of retarding additives

The hydration of tricalcium silicate (C{sub 3}S) is accelerated by pressure. However, the extent to which temperature and/or cement additives modify this effect is largely unknown. Time-resolved synchrotron powder diffraction has been used to study cement hydration as a function of pressure at different temperatures in the absence of additives, and at selected temperatures in the presence of retarding agents. The magnitudes of the apparent activation volumes for C{sub 3}S hydration increased with the addition of the retarders sucrose, maltodextrin, aminotri(methylenephosphonic acid) and an AMPS copolymer. Pressure was found to retard the formation of Jaffeite relative to the degree of C{sub 3}S hydration in high temperature experiments. For one cement slurry studied without additives, the apparent activation volume for C{sub 3}S hydration remained close to {approx} -28 cm{sup 3} mol{sup -1} over the range 25 to 60 C. For another slurry, there were possible signs of a decrease in magnitude at the lowest temperature examined.

02 PETROLEUM↗

Analysis of the surface of tricalcium silicate during the induction period by X-ray photoelectron spectroscopy

X-ray photoelectron spectroscopy allows the analysis of surface layers with a thickness of a few nanometers. The method is sensitive to the chemical environment of the atoms since the binding energy of the electrons depends on the chemical bonds to neighboring atoms. It has been applied to the hydration of tricalcium silicate (Ca{sub 3}SiO{sub 5}, C{sub 3}S) by analyzing a sample after 30 min of hydration. Also two references have been investigated namely anhydrous C{sub 3}S and intermediate phase in order to enable a quantitative evaluation of the experimental data. In the hydrated C{sub 3}S sample, the analyzed volume (0.2 mm{sup 2} surface by 13 nm depth) contained approximately 44 wt.% of C{sub 3}S and 56 wt.% of intermediate phase whereas C-S-H was not detected. Scanning Electron Microscopy data and geometric considerations indicate that the intermediate phase forms a thin layer having a thickness of approximately 2 nm and covers the complete surface instead of forming isolated clusters.

36 MATERIALS SCIENCE↗

Synthesis and nano-mechanical characterization of calcium-silicate-hydrate (C-S-H) made with 1.5 CaO/SiO{sub 2} mixture

In this study, calcium silicate hydrate (C-S-H) is synthesized and characterized. C-S-H slurry was made with calcium oxide (CaO) to micro-silica (SiO{sub 2}) mixture ratio of 1.5 and enough deionized water. The slurry was continuously mixed for 7 days, then the excess water was removed. Two methods of drying were implemented: one method used the standard d-dry technique and the other was equilibrated to 11% relative humidity (RH). The dried powders were characterized using thermo gravimetric analysis (TGA), X-ray diffraction analysis (XRDA), and {sup 29}Si magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy. The stoichiometric formulas of synthetic C-S-H powders dried to d-dry and 11% RH in this study were approximated as C{sub 1.2}SH{sub 0.7} and C{sub 1.2}SH{sub 2.4} respectively. The powders were then compacted to create specimens with porosities similar to C-S-H in hydrated cement. The specimens underwent nanoindentation to mechanically characterize C-S-H. The experiments provide insight on the nanoscale mechanical characteristics of C-S-H.

36 MATERIALS SCIENCE↗

The di- and tricalcium silicate dissolutions

In this study, a specially designed reactor connected to an ICP spectrometer enabled the careful determination of the dissolution rates of C{sub 3}S, C{sub 2}S and CaO, respectively, over a broad range of concentration of calcium and silicates under conditions devoid of C–S–H. The kinetic laws, bridging the dissolution rates and the undersaturations, were obtained after extrapolation of rate zero allowing the estimation of the true experimental solubility products of C{sub 3}S (K{sub sp} = 9.6 · 10{sup −23}), C{sub 2}S (K{sub sp} = 4.3 · 10{sup −18}) and CaO (K{sub sp} = 9.17 · 10{sup −6}). The latter are then compared to the solubilities calculated from the enthalpies of formation. We propose that the observed deviations result from the protonation of the unsaturated oxygen atoms present at the surface of these minerals. Hydration rates measured in cement pastes or in C{sub 3}S pastes are in excellent agreement with the kinetic law found in this study for C{sub 3}S under conditions undersaturated with respect to C–S–H.

36 MATERIALS SCIENCE↗

New insights into water bonding during early tricalcium silicate hydration with quasielastic neutron scattering

New information on the water bonding during the first 36 h of hydration of tricalcium silicate was obtained using the high neutron flux at the sample position of the time-of-flight spectrometer (TOFTOF), FRM II in Garching, Germany, together with {sup 29}Si NMR and X-ray diffraction measurements. A rapid increase in the amount of constrained water was observed at the beginning of the induction period. This is attributed to the formation of an early C-S-H with a large specific surface area (around 800 m{sup 2}/g). During subsequent hydration, the amount of constrained water, as given by the total surface area of the hydration products, is controlled by (a) the formation of new metastable early C-S-H which increases total surface area and (b) polymerisation processes which reduce total surface area. The relative contribution of these processes varies during hydration.

36 MATERIALS SCIENCE↗

Effect of temperature on the microstructure of calcium silicate hydrate (C-S-H)

Temperature affects the properties of concrete through its effect on the hydration of cement and its associated microstructural development. This paper focuses on the modifications to C-S-H induced by isothermal curing between 5 and 60 °C. The results show that as the temperature increases (within the range studied) the C/S ratio of C-S-H changes only slightly, with a higher degree of polymerisation of silicate chains, but there is a significant decrease in its bound water content and an increase of apparent density of 25%. This increase seems to come from a different packing of C-S-H at the nanoscale. As a consequence of these changes, the microstructure of the cement paste is much coarser and porous, which explains the lower final strengths obtained by curing at elevated temperatures. -- Highlights: •C-S-H structure studied at the atomic level •Multiple analytical techniques used •Studies conducted at temperatures above and below normal temperatures.

36 MATERIALS SCIENCE↗

Relation between reactivity and electronic structure for α' L -, β- and γ-dicalcium silicate: A first-principles study

The effect of the electronic structures of α' L -, β-, and γ-dicalcium silicate (α' L -, β- and γ-C₂S, C = CaO, S = SiO₂) on hydration reactivity have been investigated by first-principles calculations. Active O atoms with larger charge densities are found in α' L - and β-C₂S, while they are absent in γ-C₂S. The local density of states of valence band maximum in α' L - and β-C₂S is highly localized around active O atoms, whereas that in γ-C₂S is homogeneously dispersed. For the active O-2p orbital in α' L - and β-C₂S, the highest orbital energy in the partial density of states is about 0.31 eV higher than that of the inactive O in γ-C₂S. These differences make the active O atoms of α' L - and β-C₂S more susceptible to electrophilic attack and result in higher hydration reactivity for α' L - and β-C₂S.

36 MATERIALS SCIENCE↗

Formation of magnesium silicate hydrate (M-S-H) cement pastes using sodium hexametaphosphate

Magnesium silicate hydrate (M-S-H) gel is formed by the reaction of brucite with amorphous silica during sulphate attack in concrete and M-S-H is therefore regarded as having limited cementing properties. The aim of this work was to form M-S-H pastes, characterise the hydration reactions and assess the resulting properties. It is shown that M-S-H pastes can be prepared by reacting magnesium oxide (MgO) and silica fume (SF) at low water to solid ratio using sodium hexametaphosphate (NaHMP) as a dispersant. Characterisation of the hydration reactions by x-ray diffraction and thermogravimetric analysis shows that brucite and M-S-H gel are formed and that for samples containing 60 wt.% SF and 40 wt.% MgO all of the brucites react with SF to form M-S-H gel. These M-S-H cement pastes were found to have compressive strengths in excess of 70 MPa.

36 MATERIALS SCIENCE↗

Distinctive microstructural features of aged sodium silicate-activated slag concretes

Electron microscopic characterisation of 7-year old alkali-activated blast-furnace slag concretes enabled the identification of distinct microstructural features, providing insight into the mechanisms by which these materials evolve over time. Backscattered electron images show the formation of Liesegang-type ring formations, suggesting that the reaction at advanced age is likely to follow an Oswald supersaturation–nucleation–depletion cycle. Segregation of Ca-rich veins, related to the formation of Ca(OH){sub 2}, is observed in microcracked regions due to the ongoing reaction between the pore solution and available calcium from remnant slag grains. A highly dense and uniform interfacial transition zone is identified between siliceous aggregate particles and the alkali activated slag binders, across the concretes assessed. Alkali-activated slag concretes retain a highly dense and stable microstructure at advanced ages, where any microcracks induced at early ages seem to be partially closing, and the remnant slag grains continue reacting.

36 MATERIALS SCIENCE↗

Calcium silicate hydrates: Solid and liquid phase composition

This paper presents a review on the relationship between the composition, the structure and the solution in which calcium silicate hydrate (C–S–H) is equilibrated. The silica chain length in C–S–H increases with the silicon concentration and the calcium content in the interlayer space with the calcium concentrations. Sodium and potassium are taken up in the interlayer space, preferentially at low calcium concentrations and thus by low Ca/Si C–S–H. Aluminium uptake in C–S–H increases strongly at higher aluminium concentrations in the solution. At low Ca/Si, aluminium substitutes silica in the bridging position, at Ca/Si > 1 aluminium is bound in TAH. Recently developed thermodynamic models are closely related to the structure of C–S–H and tobermorite, and able to model not only the solubility and the chemical composition of the C–S–H, but also to predict the mean silica chain length and the uptake of aluminium.

36 MATERIALS SCIENCE↗

Structural and nano-mechanical properties of Calcium Silicate Hydrate (C-S-H) formed from alite hydration in the presence of sodium and potassium hydroxide

This research evaluates the effect of sodium and potassium hydroxide on the structure and nano-mechanical properties of Calcium Silicate Hydrate (C-S-H) formed from the hydration of pure alite. Monoclinic (MIII) alite was synthesized and hydrated, using water-to-alite ratios of 0.5 and 0.6 and additions of 10% NaOH and KOH by weight of alite. Based on results of X-ray diffraction, isothermal calorimetry, thermogravimetric analysis, Nuclear Magnetic Resonance and nanoindentation, two different effects of the alkaline hydroxides on the hydration reaction of alite, both at early and later ages, can be identified: (i) a differentiated hydration process, attributed to an enhancement in calcium hydroxide (CH) precipitation and a stimulation of the C-S-H nuclei; and (ii) an increase in the elastic modulus of the C-S-H aggregations, attributed to an electrostatic attraction between positive charges from the alkaline cations and negative charges from the C-S-H structure.

36 MATERIALS SCIENCE↗

A new view on the kinetics of tricalcium silicate hydration

C{sub 3}S hydration is an interesting example of chemical coupling between C{sub 3}S dissolution, C–S–H and portlandite precipitation. It occurs because Ca{sup 2+}, OH{sup −} and silicate ions are present in C{sub 3}S, in both hydration products and in the surrounding solution. Various experimental data sets reveal that the undersaturation with respect to C{sub 3}S always increases when C{sub 3}S hydration enters into the deceleratory phase, leading to the conclusion that C{sub 3}S dissolution is at the origin of this deceleration, not C–S–H growth. In addition, as soon as portlandite precipitates, the dissolution limits the hydration already in the acceleratory hydration step. The evolution of the undersaturation cannot account for the hydration peak. Rather, it results from an extension and subsequently a decrease of the C{sub 3}S reactive surface area. The formation and coalescence of dissolution etch-pits can provide a reasonable explanation for the C{sub 3}S hydration kinetics.

36 MATERIALS SCIENCE↗

Edge dislocations in dicalcium silicates: Experimental observations and atomistic analysis

Understanding defects and influence of dislocations on dicalcium silicates (Ca{sub 2}SiO{sub 4}) is a challenge in cement science. We report a high-resolution transmission electron microscopy image of edge dislocations in Ca{sub 2}SiO{sub 4}, followed by developing a deep atomic understanding of the edge dislocation-mediated properties of five Ca{sub 2}SiO{sub 4} polymorphs. By decoding the interplay between core dislocation energies, core structures, and nucleation rate of reactivity, we find that γ-C2S and α-C2S polymorphs are the most favorable polymorphs for dislocations in Ca{sub 2}SiO{sub 4}, mainly due to their large pore channels which take away majority of the distortions imposed by edge dislocations. Furthermore, in the context of edge dislocation, while α-C2S represents the most active polymorph for reactivity and crystal growth, β-C2S represents the most brittle polymorph suitable for grinding. This work is the first report on the atomistic-scale analysis of edge dislocation-mediated properties of Ca{sub 2}SiO{sub 4} and may open up new opportunities for tuning fracture and reactivity processes of Ca{sub 2}SiO{sub 4} and other cement components.

36 MATERIALS SCIENCE↗