Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ratio”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Solution-Phase Growth of Cu Nanowires with Aspect Ratios Greater Than 1000: Multiscale Theory

Penta-twinned metal nanowires are finding widespread application in existing and emerging technologies. However, little is known about their growth mechanisms. Here, we probe the origins of chloride- and alkylamine-mediated, solution-phase growth of penta-twinned Cu nanowires from first principles using multi-scale theory. Using quantum density functional theory (DFT) calculations, we characterize the binding and surface diffusion of Cu atoms on chlorine-covered Cu(100) and Cu(111) surfaces. We find stronger binding and slower diffusion of Cu atoms on chlorinated Cu(111) than on chlorinated Cu(100) – a reversal of the trend for bare Cu surfaces. We also probe inter-facet diffusion and find this proceeds faster from Cu(100) to Cu(111) than the reverse. Using the DFT rates for hopping between individual sites at Ångstrom scales, we calculate coarse-grained, inter-facet rates for nanowires of various lengths – up to hundreds of μm – and diameters in the 10-nm range. We predict nanowires with aspect ratios around 100 based on surface diffusion, alone. We also account for the influence of a self-assembled alkylamine layer that covers most of the {100} facets, but is absent or thin and disordered on the {111} facets and in an “end zone” near the {100}-{111} boundary. With an end zone, we predict a wide range of nanowire aspect ratios in the experimental ranges. Our work reveals the mechanisms by which a halide – chloride – promotes the growth of high-aspect-ratio nanowires.

36 MATERIALS SCIENCE↗

Enhancing the Cherenkov over scintillation ratio using dichroic filters in BGO and TlCl for TOF-PET

Abstract The Cherenkov emission in inorganic crystal scintillators has been shown to dramatically improve time resolution for time-of-flight positron emission tomography (TOF-PET) for in slow scintillators with a high refractive index such as bismuth germanium oxide (BGO). This is due to the faster nature of the Cherenkov emission (tens of picoseconds) with respect to scintillation (nanosecond). However, the presence of slower scintillation light and the inability of existing detectors to distinguish between Cherenkov and scintillation make it difficult for BGO to achieve a good CTR for all the detected coincidence events. In this paper, we exploit the difference between the Cherenkov and scintillation emission spectra and use dichroic filters to enhance the Cherenkov over scintillation ratio. Dichroic filters transmit or reflect photons based on their wavelength, with a photon attenuation lower than 10%. We investigate several shortpass and longpass dichroic filters in a single-photon configuration with BGO and find the optimal filter that maximizes the Cherenkov over scintillation ratio. We demonstrate that we can enhance the ratio of Cherenkov to scintillation photons by a factor of 2.17 ± 0.38 by employing a shortpass dichroic filter with a cut-off wavelength of 450 nm for BGO, and by a factor of 2.87 ± 0.40 using a longpass dichroic filter with a cut-on wavelength of 550 nm for iodine/beryllium-doped thallium chloride.

Science & Technology - Other Topics↗

Origin of large variations of current on/off ratio and switching voltage in atomically thin memristors: an exascale ab initio transport study

Nonvolatile resistive switching in two-dimensional monolayers opens a new avenue for high-density memory/computing devices. However, questions remain as to why the current on/off ratio and switching voltage vary significantly among different devices. Here, we simulate electronic transport of large systems consisting of a h-BN monolayer sandwiched by gold electrodes, enabled by an implementation of the nonequilibrium Green’s function method in the exascale density functional theory (DFT) code: Real-space MultiGrid. Systematic calculations reveal that the wide range of on/off ratios is due to variations in interface distances between the electrode and h-BN that significantly modulate their wavefunction overlap. In addition, DFT calculations demonstrate that the energy barrier of a gold atom dissociating from the electrode to h-BN increases dramatically with the interface distance, thereby explaining the strong dependence of the switching voltage on distance. Our work demonstrates the significance of interface distance in governing the current on/off ratio and switching voltage.

Electronic devices↗

Improved uranium isotopic ratio determinations for the liquid sampling-atmospheric pressure glow discharge orbitrap mass spectrometer by use of moving average processing

The liquid sampling-atmospheric pressure glow discharge (LS-APGD) is a versatile combined atomic and molecular (CAM) ionization source capable of ionizing elemental species, small polar compounds, low-polarity polycyclic aromatic hydrocarbons, and proteins. While the LS-APGD has been proven capable of determining the 235U/238U isotope ratio in enriched and natural uranium, recent efforts have strived to reduce the analysis time of individual measurements by employing higher-order data processing techniques, specifically, moving average methods. Additionally, the use of a moving average (of data windows of various widths) improves the precision of the ratio measurements and reduces the number of scans needed to be collected to generate high-precision results. Additionally, use of the moving average minimizes the quantity of sample that needs to be analyzed while reducing the measurement time. These reductions have allowed isotope ratio (IR) determinations to be made using injections instead of direct infusion of the analyte. For example, employing a 40-point window width in the moving average to direct infusion data reduced the percent relative standard deviation (% RSD) of the 235U/238U values from 3.4% to 0.5%. For the injection of a 100 μL aliquot, the % RSD was reduced from 5.3% to 0.7%.

74 ATOMIC AND MOLECULAR PHYSICS↗

Ultra-high SERS detection of consumable coloring agents using plasmonic gold nanostars with high aspect-ratio spikes

Solution-based SERS detection by using a portable Raman instrument has emerged as an important tool due to its simplicity, and flexibility for rapid and on-site screening of analyte molecules. However, this method has several shortcomings, including poor sensitivity especially for weak-affinity analyte molecules, where there is no close contact between the plasmonic metal surface and analyte molecule. Examples of weak-affinity molecules include pigment molecules that are commonly used as a consumable coloring agent, such as allura red (AR), and sunset yellow (SY). As high consumption of colorant agents has been shown to cause adverse effects on human health, there is a strong need to develop a simple and practical sensing system with high sensitivity for these agents. Here we present a novel, highly sensitive solution-based SERS detection method for AR, and SY by using CTAC capped gold nanostars (GNS) having different aspect ratios (GNS-2, GNS-4, and GNS-5) without utilizing any aggregating agents which can enhance SERS signal however it reduces batch to batch reproducibility. The influence of the aspect ratio of GNS on SERS properties was investigated. We have achieved a limit of detection (LOD) of AR and SY as low as 0.5 and 1 ppb, respectively by using GNS-5 with the advantages of minimal sample preparation by just mixing the analyte solution into a well plate containing GNS solution. In addition, excellent colloidal stability and reproducibility have further enhanced the applicability in real-world samples. Altogether, our results evidence that the solution-based SERS detection platform using high aspect-ratio GNS can be applied for practical application to detect pigment molecules in real samples with satisfactory results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning the Co/Fe ratio in BaCo x Fe 0.8– x Zr 0.1 Y 0.1 O 3– δ , a promising triple ionic and electronic conducting oxide, to boost electrolysis and fuel cell performance

The triple conducting oxide BaCo 0.4 Fe 0.4 Zr 0.1 Y0.1O 3–δ (BCFZY4411), which accommodates simultaneous transport of protons, oxygen ions, and p-type electronic carriers, has been intensively investigated in recent years as a high-performance positive electrode material for fuel cell and electrolysis applications. The heavy Co and Fe-based transition metal doping in BCFZY4411 ensures adequate electrical conductivity while the multiple oxidation states of Co and Fe assist the electrocatalytic and redox ability. Despite the considerable role of Co and Fe transition metal doping in controlling electrochemical activity, however, the study of alternative BCFZY compositions with varying Co/Fe ratios has not yet been pursued. Here, we evaluate the electrochemical performance of a series of BaCo x Fe 0.8–x Zr 0.1 Y0.1O 3–δ compositions with varying Co/Fe ratio (x = 0.1, 0.2, 0.4, 0.6, 0.7) and use oxygen ion tracer diffusion and in situ high-temperature X-ray diffraction to investigate the effect of Co/Fe ratio on electrocatalytic activity, electronic conductivity, oxygen ion incorporation and transport kinetics, and thermomechanical behavior. We find that Co-rich BCFZY7111 yields the highest performance due to exceptionally high oxygen vacancy diffusion and shows a lower and more linear thermal expansion behavior compared to Fe-rich compositions. A protonic ceramic button cell incorporating a BCFZY7111 positive electrode yields a peak power density of 695 mW cm –2 under fuel cell mode and an electrolysis current density of 1976 mA cm –2 at 1.4 V at 600 °C, underscoring the promise of this new BCFZY electrode composition.

30 DIRECT ENERGY CONVERSION↗

Discrepancy in the Critical State Void Ratio of Poorly Graded Sand due to Shear Strain Localization

The critical state (CS) concept is a theoretical framework that models the constitutive behavior of soils, including sand and other granular materials. It supports the notion of a unique postfailure state, where the soil ultimately experiences continuous shearing with no change in the plastic volumetric strain. However, the published literature has frequently noted the nonconvergence of sand specimens with different initial densities to a unique CS in the compression plane due to many factors such as specimen fabric, particle morphology, breakage, and grain size distribution. This paper examines the CS for poorly graded (uniform) glass beads and 3 different types of silica sands using 50 conventional triaxial compression (CTC) experiments, 12 oedometer tests, and in situ synchrotron microcomputed tomography (SMT) scans for 10 CTC experiments. The results of the 50 CTC experiments revealed a diffused CS zone in the compression plane, which was further examined using the in situ SMT scans. A thorough three-dimensional image analysis of the SMT scans accurately quantified the evolution of the local void ratio (elocal) versus axial compression within zones of intensive shearing toward the center of the specimen. The evolution of the void ratio was also measured using the entire volume of the specimen (eglobal). At the CS, the elocal/eglobal ratio was assessed to be ~1.25 when a single shear band developed within the scanned specimens and ~1.1-1.15 for specimens that failed via external bulging that was internally manifested by the development of multiple shear bands. This finding suggests that the CS zone in the compression plane can be attributed to the common wrong consideration of eglobal evolution in lieu of elocal within the developing shear bands. Furthermore, the lack of shear band development in uniaxial compression has made the results of the oedometer test reliable in quantifying the CS parameters in the compression plane.

58 GEOSCIENCES↗

Kinetic-ballooning-bifurcation in tokamak pedestals across shaping and aspect-ratio

We use a new gyrokinetic threshold model to predict a bifurcation in tokamak pedestal width-height scalings that depends strongly on plasma shaping and aspect-ratio. The bifurcation arises from the first and second stability properties of kinetic-ballooning-modes that yields wide and narrow pedestal branches, expanding the space of accessible pedestal widths and heights. The wide branch offers potential for edge-localized-mode-free pedestals with high core pressure. For negative triangularity, low-aspect-ratio configurations are predicted to give steeper pedestals than conventional-aspect-ratio. Both wide and narrow branches have been attained in tokamak experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of a high performance MagLIF target platform using high aspect ratio coated liners and low-mix laser preheat

We report on a series of Magnetized Liner Inertial Fusion (MagLIF) experiments conducted on the Z pulsed power facility that utilized high aspect ratio (ratio of outer radius to wall thickness) liners with dielectric coatings and low-mix laser preheat configurations. The liners consisted of an aspect ratio of 10.6 beryllium tube coated with 75 μm of epoxy on the outside that have been shown to maintain a better implosion stability than uncoated beryllium and have demonstrated consistent stagnation performances in previous experiments [Ampleford et al., Phys. Plasmas 31, 022703 (2024)]. Two-dimensional HYDRA simulations were used to design three different “co-injection” laser configurations, whereby a second laser is used to provide an early prepulse before the main pulse, to reduce LEH foil mix while increasing the fuel density and coupled energy. The laser preheat energy for each configuration was constrained using dedicated laser experiments before being applied to the integrated MagLIF experiments on Z. The DD neutron yield for experiments using co-injection preheat configurations is found to increase with the specific preheat energy in line with simulations. The highest neutron yield achieved in this study of 1.1 × 10 13 matches the highest reported in a MagLIF experiment to date and is a factor 3.5 times higher than similar experiments using preheat with no phase plate smoothing. We attempt to assess the effects of mix and morphology to explain the improved performance; however, neither factor is found to be conclusive within the uncertainty of the measurements.

Harvey-Thompson, A. J.↗

Design of a Thomson scattering diagnostic for the SMall Aspect Ratio Tokamak (SMART)

Here, we describe the design of a Thomson scattering (TS) diagnostic to be used on the SMall Aspect Ratio Tokamak (SMART). SMART is a spherical tokamak being commissioned in Spain that aims to explore positive triangularity and negative triangularity plasma scenarios at a low aspect ratio. The SMART TS diagnostic is designed to operate at high spatial resolution, 6 mm scattering length in the low-field side and 9 mm in the high-field side regions, and a wide dynamic range, electron temperature from 1 eV to 1 keV and density from 5 x 10 18 m -3 to 1 x 10 20 m -3 ⁠, to resolve large gradients formed at the plasma edge and in the scrape-off layer (SOL) under different triangularities and low aspect ratios. A 2 J @1064 nm laser will be used that is capable of operating in the burst mode at 1, 2, and 4 kHz to investigate fast phenomena and at 30 Hz to study 1 s (or more) long discharges. The scattered light will be collected over an angular range of 60° – 120° from 28 spatial points in the midplane covering the entire plasma width and the outer midplane SOL. Each scattering signal will be spectrally resolved on five wavelength channels of a polychromator to obtain the electron temperature measurement. We will also present a method to monitor in situ laser alignment in the core during calibrations and plasma operations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Molecular aspect ratio effect on axial thermal transport in solution-spun carbon nanotube fibers

Neat, densely packed, and highly aligned carbon nanotube fibers (CNTFs) have appealing room-temperature axial thermal conductivity (⁠k⁠) and thermal diffusivity (⁠α⁠) for applications in lightweight heat spreading, flexible thermal connections, and thermoelectric active cooling. Although CNTFs are regularly produced from different input carbon nanotubes (CNTs), prior work has not quantified how the CNT molecular aspect ratio r (i.e., molecular length-to-diameter ratio) influences k and in well-aligned, packed CNTFs. Here, we perform self-heated steady-state and three-omega thermal measurements at room temperature on CNTF suspended in vacuum. Our results show that k increases from 150 to 380 W / mK for viscosity-averaged molecular aspect ratios increasing from r = 960 to 5600 and nanotube diameters of ~2 nm, which we attribute to the effects of thermal resistances between CNT bundles. CNTFs made with varying volume fraction Φ of constituent high-r and low-r CNT have properties that fall within or below the typical macroscopic rule-of-mixtures bounds. The thermal diffusivity α scales with k, leading to a sample-averaged volumetric heat capacity of 1.5 ± 0.3 MJ / m 3 K⁠. This work's findings that fibers made from longer CNT have larger k and α at room temperature motivate further investigation into thermal transport in solution-spun CNTF.

42 ENGINEERING↗

Factors underlying a latitudinal gradient in the S/G lignin monomer ratio in natural poplar variants

The chemical composition of wood plays a pivotal role in the adaptability and structural integrity of trees. However, few studies have investigated the environmental factors that determine lignin composition and its biological significance in plants. Here, we examined the lignin syringyl-to-guaiacyl (S/G) ratio in members of a Populus trichocarpa population sourced from their native habitat and conducted a genome wide association study to identify genes linked to lignin formation. Our results revealed many significant associations, suggesting that lignin biosynthesis is a complex polygenic trait. Additionally, we found an increase in the S/G ratio from northern to southern geographic origin of the trees sampled, along with a corresponding metabolic and transcriptional reprogramming of xylem cell wall biosynthesis. Further molecular analysis identified a mutation in a cell wall laccase genetically associated with higher S/G ratios that predominate in trees from warmer lower latitudes. Collectively, our findings suggest that lignin heterogeneity arises from an evolutionary process enabling poplar adaptation to different climatic challenges.

adaptation↗

Overview of the MAST Upgrade physics programme: testing novel concepts at low aspect ratio to inform future devices

The research programme performed on the Mega Amp Spherical Tokamak (MAST) Upgrade experiment has made significant advances in developing the physics understanding of low aspect ratio tokamaks in support of the operation of ITER and design of fusion powerplants. High performance plasma scenarios have been developed to facilitate a broad programme of experiments, in which confinement is constrained by the presence of m/n = 2/1 modes that cause substantial losses of fast ions. The onset of these modes coincides with the q = 2 surface residing in a local minimum in the toroidal current density profile. The maximum electron temperature at the pedestal top, T e,ped is limited with gas fuelling to ∼350 eV to maintain regular ELMs; higher T e,ped results in a transition to a non-stationary ELM-free regime. The operational space of spherical tokamaks has been expanded into small and ELM-free regimes. Strong shaping of the last closed flux surface can induce a transition from large to small ELMs, and ELM suppression with resonant magnetic perturbations has been observed for the first time in a low aspect ratio tokamak. Negative triangularity shaping has induced a transition from ELMy H-mode to a high-performance L-mode regime for the first time in a low aspect ratio tokamak. In studies of fast ion confinement, losses of fast particles due to Global Alfvén Eigenmodes have been identified. Interactions between fast ions generated by off-axis neutral beam injection and thermal neutrals can result in significant losses of fast ions. Experiments with on- and off-axis neutral beam injection exhibit a flux pumping mechanism, where the central safety factor is held to ∼1 in the absence of sawteeth. In studies of pedestal physics, it has been found that elevated main chamber neutral pressures result in an increase in the electron density and reduction in the temperature at the pedestal top. Advances in understanding plasma exhaust include the integration of a high-performance plasma core with detached outer divertors in the X-point target configuration. A newly commissioned lower divertor cryopump reduces the lower divertor neutral pressure by up to 50%, with minimal effect on the main chamber or upper divertor. New measurements and SOLPS-ITER simulations emphasise the importance of plasma–neutral interactions on divertor detachment in the conditions accessible in experiments. Real-time control of the ionisation front location in both divertor chambers independently has been demonstrated in double null experiments, enabled by the tightly baffled divertor chambers.

MAST Upgrade↗

Giant Planet Scatterings and Collisions: Hydrodynamics, Merger-Ejection Branching Ratio, and Properties of the Remnants

Planetary systems with sufficiently small orbital spacings can experience planetary mergers and ejections. The branching ratio of mergers vs ejections depends sensitively on the treatment of planetary close encounters. Previous works have adopted a simple “sticky-sphere” prescription, whose validity is questionable. We apply both smoothed particle hydrodynamics and N-body integrations to investigate the fluid effects in close encounters between gas giants and the long-term evolution of closely-packed planetary systems. Focusing on parabolic encounters between Jupiter-like planets with MJ and 2MJ, we find that quick mergers occur when the impact parameter rp (the pericenter separation between the planets) is less than 2RJ, and the merger conserved at least 97% of the initial mass. Strong tidal effects can affect the “binary-planet” orbit when rp is between 2RJ and 4RJ. We quantify these effects using a set of fitting formulae that can be implemented in N-body codes. We run a suite of N-body simulations with and without the formulae for systems of two giant planets initially in unstable, nearly circular and nearly coplanar orbits. The fluid (tidal) effects significantly increase the branching ratio of planetary mergers relative to ejections by doubling the effective collision radius. While the fluid effects do not change the distributions of semi-major axis and eccentricity of each type of remnant planets (mergers vs surviving planets in ejections), the overall orbital properties of planet scattering remnants are strongly affected due to the branching ratio change. We also find that the merger products have broad distributions of spin magnitudes and obliquities.

79 ASTRONOMY AND ASTROPHYSICS↗

Far-UV Fe emission as proxy of Eddington ratios

ABSTRACT The Eddington ratio is a key parameter that governs the diversity of quasar properties. It can be scaled with a strong anticorrelation between optical Fe iiopt and [O iii] emission. In search of such indicators in the far-UV band, the Hubble Space Telescope far-UV spectra of 150 low-redshift quasars are analysed in combination with their optical SDSS counterparts. The strength of Fe ii+Fe iii λ1123 emission is significantly correlated with that of Fe iiopt. A moderate correlation may also exist between Fe ii λ1071 and Fe iiopt. The finding opens the possibility that far-UV Fe ii emission may serve as a new gauge of the Eddington ratios. The high- and low-ionization lines in the far-UV band display different patterns: for the quasars with higher Eddington ratios, the low-ionization UV lines are stronger, and the high-ionization lines are broader and weaker.

Zheng, Wei↗

Predicting bulge to total luminosity ratio of galaxies using deep learning

ABSTRACT We present a deep learning model to predict the r-band bulge-to-total luminosity ratio (B/T) of nearby galaxies using their multiband JPEG images alone. Our Convolutional Neural Network (CNN) based regression model is trained on a large sample of galaxies with reliable decomposition into the bulge and disc components. The existing approaches to estimate the B/T ratio use galaxy light-profile modelling to find the best fit. This method is computationally expensive, prohibitively so for large samples of galaxies, and requires a significant amount of human intervention. Machine learning models have the potential to overcome these shortcomings. In our CNN model, for a test set of 20 000 galaxies, 85.7 per cent of the predicted B/T values have absolute error (AE) less than 0.1. We see further improvement to 87.5 per cent if, while testing, we only consider brighter galaxies (with r-band apparent magnitude <17) with no bright neighbours. Our model estimates the B/T ratio for the 20 000 test galaxies in less than a minute. This is a significant improvement in inference time from the conventional fitting pipelines, which manage around 2–3 estimates per minute. Thus, the proposed machine learning approach could potentially save a tremendous amount of time, effort, and computational resources while predicting B/T reliably, particularly in the era of next-generation sky surveys such as the Legacy Survey of Space and Time (LSST) and the Euclid sky survey which will produce extremely large samples of galaxies.

Grover, Harsh (ORCID:0000000321338142)↗

An investigation of non-canonical mixing in red giant stars using APOGEE 12 C/ 13 C ratios observed in open cluster stars

Standard stellar evolution theory poorly predicts the surface abundances of chemical species in low-mass, red giant branch (RGB) stars. Observations show an enhancement of p–p chain and CNO cycle products in red giant envelopes, which suggests the existence of non-canonical mixing that brings interior burning products to the surface of these stars. The 12 C/ 13 C ratio is a highly sensitive abundance metric used to probe this mixing. We investigate extra RGB mixing by examining: (1) how 12 C/ 13 C is altered along the RGB, and (2) how 12 C/ 13 C changes for stars of varying age and mass. Our sample consists of 43 red giants, spread over 15 open clusters from the Sloan Digital Sky Survey’s APOGEE DR17, that have reliable 12 C/ 13 C ratios derived from their APOGEE spectra. We vetted these 12 C/ 13 C ratios and compared them as a function of evolution and age/mass to the standard mixing model of stellar evolution, and to a model that includes prescriptions for RGB thermohaline mixing and stellar rotation. We find that the observations deviate from standard mixing models, implying the need for extra mixing. Additionally, some of the abundance patterns depart from the thermohaline model, and it is unclear whether these differences are due to incomplete observations, issues inherent to the model, our assumption of the cause of extra mixing, or any combination of these factors. Nevertheless, the surface abundances across our age/mass range clearly deviate from the standard model, agreeing with the notion of a universal mechanism for RGB extra mixing in low-mass stars.

79 ASTRONOMY AND ASTROPHYSICS↗

Fundamental physics with ESPRESSO: a new determination of the D/H ratio towards PKS1937-101

ABSTRACT Primordial abundances of light elements are sensitive to the physics of the early Universe and can directly constrain cosmological quantities, such as the baryon-to-photon ratio $\eta _{10}$, the baryon density, and the number of neutrino families. Deuterium is especially suited for these studies: its primordial abundance is sensitive and monotonically dependent on $\eta _{10}$, allowing an independent measurement of the cosmic baryon density that can be compared, for instance, against the Planck satellite data. The primordial deuterium abundance can be measured in high H i column density absorption systems towards distant quasars. We report here a new measurement, based on high-resolution ESPRESSO data, of the primordial D i abundance of a system at redshift $z \sim 3.572$, towards PKS1937-101. Using only ESPRESSO data, we find a D /H ratio of $2.638\pm 10^{-5}$, while including the available UVES data improves the precision, leading to a ratio of $2.608 \pm 10^{-5}$. The results of this analysis agree with those of the most precise existing measurements. We find that the relatively low column density of this system ($\log {N_{\rm H_I}/ {\rm cm}^{-2}}\sim 18$) introduces modelling uncertainties, which become the main contributor to the error budget.

Guarneri, Francesco (ORCID:0000000347409762)↗