Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REPROCESSING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Actinide oxide dissolution in tributyl phosphate

An alternative to dissolving used nuclear fuel (UNF) in an acidic solution during reprocessing is direct dissolution in an organic solution, which would eliminate an aqueous dissolution step, decrease the amount of nitrate needed, and reduce the facility size. The flowsheet for this potentially less expensive alternative is first to voloxidize the UNF to remove fission product gases and form an oxide. After voloxidation, the UNF is then dissolved in an organic solution containing an extractant mixed with an aliphatic diluent and pre-equilibrated with nitric acid. The organic solution then goes through a solvent extraction process to recover the uranium and/or other desired radionuclides. This work qualitatively studied the dissolution of actinide oxides (UO2, NpO2, and PuO2) in tributyl phosphate using UV-Vis-NIR absorbance spectroscopy to ascertain dissolution behavior. Initial studies included material that is otherwise difficult to dissolve in only nitric acid, specifically CeO2, that is sometimes used as a dissolution surrogate for PuO2. This work confirmed that CeO2, NpO2, and PuO2 are difficult to dissolve in 30 vol% TBP-dodecane pre-equilibrated with 10 M HNO3 and will readily dissolve when co-precipitated with U (i.e., the mixed oxides U-Ce, U-Np, and U-Pu), surrogates for voloxidized nuclear fuel.

Gogolski, Jarrod [Savannah River National Laborato↗
DOE OSTI2023

Low-pass spectral analysis of time-resolved serial femtosecond crystallography data

Low-pass spectral analysis (LPSA) is a recently developed dynamics retrieval algorithm showing excellent retrieval properties when applied to model data affected by extreme incompleteness and stochastic weighting. In this work, we apply LPSA to an experimental time-resolved serial femtosecond crystallography (TR-SFX) dataset from the membrane protein bacteriorhodopsin (bR) and analyze its parametric sensitivity. While most dynamical modes are contaminated by nonphysical high-frequency features, we identify two dominant modes, which are little affected by spurious frequencies. The dynamics retrieved using these modes shows an isomerization signal compatible with previous findings. We employ synthetic data with increasing timing uncertainty, increasing incompleteness level, pixel-dependent incompleteness, and photon counting errors to investigate the root cause of the high-frequency contamination of our TR-SFX modes. By testing a range of methods, we show that timing errors comparable to the dynamical periods to be retrieved produce a smearing of dynamical features, hampering dynamics retrieval, but with no introduction of spurious components in the solution, when convergence criteria are met. Using model data, we are able to attribute the high-frequency contamination of low-order dynamical modes to the high levels of noise present in the data. Finally, we propose a method to handle missing observations that produces a substantial dynamics retrieval improvement from synthetic data with a significant static component. Reprocessing of the bR TR-SFX data using the improved method yields dynamical movies with strong isomerization signals compatible with previous findings.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Processing behavior evolution of recycled polypropylene: An integrated experimental and Computer-Aided engineering simulation study

Polypropylene (PP) comprises 21% of global plastics production and 18% of plastics waste, yet less than 1% of solid-waste PP is recycled in the United States (U.S.), representing significant environmental and economic challenges. Mechanical recycling, the most prevalent recycling method, subject's materials to thermomechanical stresses, which typically degrade polymer properties, affecting the quality of polymer products. This study replicates the impact of mechanical recycling through multiple extrusion cycles to examine the effects on PP's processing behavior. Dynamic scanning calorimetry (DSC) measurements showed stable melting behavior across all processing conditions, while crystallization analysis exhibited consistent shifts in kinetic parameters. Rheological characterization demonstrated progressive viscosity reductions through successive cycles, particularly pronounced at elevated reprocessing temperatures. Here, the integration of this experimental data into injection molding simulations showed that recycled PP maintains viable processing characteristics. Our findings establish quantitative correlations between processing history and material behavior, enabling optimization of processing parameters directly rather than relying on trial-and-error approaches. While these results reflect idealized recycling conditions with minimal contamination, they provide a framework for understanding fundamental property evolution during mechanical recycling.

42 ENGINEERING↗
DOE OSTI2023

Methanediol from cloud-processed formaldehyde is only a minor source of atmospheric formic acid

Atmospheric formic acid is severely underpredicted by models. A recent study proposed that this discrepancy can be resolved by abundant formic acid production from the reaction ( 1 ) between hydroxyl radical and methanediol derived from in-cloud formaldehyde processing and provided a chamber-experiment-derived rate constant, k 1 = 7.5 × 10 −12 cm 3 s −1 . High-level accuracy coupled cluster calculations in combination with E,J -resolved two-dimensional master equation analyses yield k 1 = (2.4 ± 0.5) × 10 −12 cm 3 s −1 for relevant atmospheric conditions ( T = 260–310 K and P = 0–1 atm). We attribute this significant discrepancy to HCOOH formation from other molecules in the chamber experiments. More importantly, we show that reversible aqueous processes result indirectly in the equilibration on a 10 min. time scale of the gas-phase reaction HCHO + H 2 O ⇌ HOCH 2 OH (2) with a HOCH 2 OH to HCHO ratio of only ca . 2%. Although HOCH 2 OH outgassing upon cloud evaporation typically increases this ratio by a factor of 1.5–5, as determined by numerical simulations, its in-cloud reprocessing is shown using a global model to strongly limit the gas-phase sink and the resulting production of formic acid. Based on the combined findings in this work, we derive a range of 1.2–8.5 Tg/y for the global HCOOH production from cloud-derived HOCH 2 OH reacting with OH. The best estimate, 3.3 Tg/y, is about 30 times less than recently reported. The theoretical equilibrium constant K eq (2) determined in this work also allows us to estimate the Henry’s law constant of methanediol (8.1 × 10 5 M atm −1 at 280 K).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Suppression of pair beam instabilities in a laboratory analogue of blazar pair cascades

The generation of dense electron–positron pair beams in the laboratory can enable direct tests of theoretical models of γ-ray bursts and active galactic nuclei. We have successfully achieved this using ultrarelativistic protons accelerated by the Super Proton Synchrotron at (CERN). In the first application of this experimental platform, the stability of the pair beam is studied as it propagates through a meter-length plasma, analogous to TeV γ-ray-induced pair cascades in the intergalactic medium. It has been argued that pair beam instabilities disrupt the cascade, thus accounting for the observed lack of reprocessed GeV emission from TeV blazars. If true, this would remove the need for a moderate strength intergalactic magnetic field to explain the observations. We find that the pair beam instability is suppressed if the beam is not perfectly collimated or monochromatic, hence the lower limit to the intergalactic magnetic field inferred from γ-ray observations of blazars is robust.

blazar jets↗
DOE OSTI2024

Adsorption of Radioactive Iodine Using Nanocarbon on ETS-10 as Adsorbent

Here, laboratory-synthesized nanocarbon pelletized with titanosilicate (ETS-10) as a support matrix has been investigated for the capture of radioactive iodine present as methyl iodide (CH 3 I) in the off-gas streams produced during aqueous reprocessing of used nuclear fuel. The mass fraction of carbon in the sorbent matrix was 0.10. The effects of residence time and CH 3 I concentration were investigated using a continuous flow column setup to quantify the adsorption and desorption capacities of adsorbent under dynamic conditions from an air stream containing CH 3 I present at concentrations representative of those expected in the off-gas streams. Air with CH 3 I gas as a source in the column resulted in quantifiable CH 3 I adsorption with 0.98 mg/g of adsorption capacity. Laboratory-made nanocarbons had a larger adsorption capacity than those of the other carbons reported in the literature. Additionally, the adsorption capacity of nanocarbon on ETS-10 is compared to that of nanocarbon coated on cordierite in previous studies.

ETS-10↗
DOE OSTI2026

Calculations of enrichment cascade performance using enrichment probabilities – a new method

A new method for calculating the performance of uranium enrichment cascades is presented. The method assigns a unique “enrichment probability” for each isotope to move up or down from the basic enrichment unit, allowing independent material balance calculations for each isotope. The formulation is much simpler than previous methods, which rely on isotopic ratios, and this method can be used when previous methods fail. This method gives the same results as published cases for 235 U enrichment and also gives good agreement with published data on minor isotopes. Some comparisons with measured data and other calculations are given. One case shows that the maximum 235 U enrichment that can be obtained by enrichment of reprocessed uranium (0.02% 234 U initial) is 82%. Another example shows a large difference in the minor isotopic content of material enriched in batches compared to continuous enrichment.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2018

Extraction Behavior of Ln(III) ions by T2EHDGA/n-dodecane from Nitric acid and Sodium Nitrate Solutions

The diglycolamide extractant, T2EHDGA, has proven promising for the separation of lanthanides and minor actinides in high-level nuclear waste reprocessing. This neutral extractant has shown significant extraction capacity for HNO3 into the non-polar organic phase, along with hyper-stoichiometric nitrate dependence on extraction of trivalent f-elements. The transport behavior of T2EHDGA/n-dodecane toward trivalent lanthanides is not well understood. This work found a significant increase in distribution measurements for Eu(III) extracted from aqueous HNO3 media as compared to NaNO3. The extraction of Eu(III) from HNO3 results in a different thermodynamic product than predicted by classic solvent extraction of 3:1 ligand-metal complex as observed with NaNO3 in FTIR and UV-vis spectroscopy. Experimental distribution measurements in conjunction with the solvent extraction modeling program, SXLSQI, suggest participation of 1- to 2 HNO3 molecules in the Eu(III)/T2EHDGA complex when extracted from HNO3 media, indicative of a mechanism change responsible for the enhanced extraction behavior toward lanthanides in the presence of HNO3.

Campbell, Emily L.↗
DOE OSTI2019

In Situ Monitoring and Kinetic Analysis of the Extraction of Nitric Acid by Tributyl Phosphate in n-Dodecane using Raman Spectroscopy

Understanding the fundamental rates of transfer and complex formation is crucial in maintaining optimal efficiency and effectivity in solvent extraction. Methodologies to effectively analyze solvent extraction systems are lacking in that they are commonly off-line. Thus, a method to effectively investigate solvent extraction systems in a Lewis cell using in situ Raman spectroscopy paired with chemometric modelling has been developed to allow for on-line analysis and monitoring. Kinetic parameters of interfacial mass transfer for the extraction of nitric acid by tributyl phosphate, a process crucial to used nuclear fuel reprocessing, were measured in by spectroscopic monitoring of both phases simultaneously in a two-phase solvent extraction system. Resulting concentration data, derived from a chemometric model using Raman spectra as the base set, allowed for the calculation of kinetic parameters in the system when paired with extraction time. The forward and reverse interfacial mass transfer coefficients, kf and kr, were determined for solutions that were process relevant and of pro-cess interest, where kf was calculated as 5.3 (± 0.3) × 10-3 cm min 1 and kr was calculated as 2.9 (± 0.2) × 10-2 cm min-1. The information obtained regarding solvent extraction parameters and transfer can be applied in the further study of systems of higher complexity involving complex formation and their transfer across a liquid:liquid interface.

extraction, interfacial transport, Lewis Cell, Liq↗
DOE OSTI2025

Estimating Potential Tritium and Plutonium Production in North Korea’s Experimental Light Water Reactor

Our work explores North Korea's 100 MW-th Experimental Light Water Reactor (ELWR) and its potential contributions to the country's nuclear weapons program. Built at the Yongbyon Nuclear Research Center, the ELWR began operations in October 2023 and represents North Korea's first attempts at a light-water reactor using domestically-enriched, ceramic fuel. Our study examines possible configurations for energy, tritium, and tritium-plutonium co-production. Assuming a single-batch core, the ELWR can be used to annually produce 48-82 grams of tritium, which can supply 2-4 new boosted warheads each year, up to a maximum arsenal of 88-150 warheads total. Concurrent production of tritium and weapon-grade plutonium is also possible but requires reprocessing of spent ceramic fuel. Furthermore, these findings underscore how North Korea's nuclear capabilities may be advanced through the ELWR's dual-use potential.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2017

Stability and scalability of the CMS Global Pool: Pushing HTCondor and glideinWMS to new limits

The CMS Global Pool, based on HTCondor and glideinWMS, is the main computing resource provisioning system for all CMS workflows, including analysis, Monte Carlo production, and detector data reprocessing activities. The total resources at Tier-1 and Tier-2 grid sites pledged to CMS exceed 100,000 CPU cores, while another 50,000 to 100,000 CPU cores are available opportunistically, pushing the needs of the Global Pool to higher scales each year. These resources are becoming more diverse in their accessibility and configuration over time. Furthermore, the challenge of stably running at higher and higher scales while introducing new modes of operation such as multi-core pilots, as well as the chaotic nature of physics analysis workflows, places huge strains on the submission infrastructure. This paper details some of the most important challenges to scalability and stability that the CMS Global Pool has faced since the beginning of the LHC Run II and how they were overcome.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

An outflow powers the optical rise of the nearby, fast-evolving tidal disruption event AT2019qiz

ABSTRACT At 66 Mpc, AT2019qiz is the closest optical tidal disruption event (TDE) to date, with a luminosity intermediate between the bulk of the population and the faint-and-fast event iPTF16fnl. Its proximity allowed a very early detection and triggering of multiwavelength and spectroscopic follow-up well before maximum light. The velocity dispersion of the host galaxy and fits to the TDE light curve indicate a black hole mass ≈106 M⊙, disrupting a star of ≈1 M⊙. By analysing our comprehensive UV, optical, and X-ray data, we show that the early optical emission is dominated by an outflow, with a luminosity evolution L ∝ t2, consistent with a photosphere expanding at constant velocity (≳2000 km s−1), and a line-forming region producing initially blueshifted H and He ii profiles with v = 3000–10 000 km s−1. The fastest optical ejecta approach the velocity inferred from radio detections (modelled in a forthcoming companion paper from K. D. Alexander et al.), thus the same outflow may be responsible for both the fast optical rise and the radio emission – the first time this connection has been observed in a TDE. The light-curve rise begins 29 ± 2 d before maximum light, peaking when the photosphere reaches the radius where optical photons can escape. The photosphere then undergoes a sudden transition, first cooling at constant radius then contracting at constant temperature. At the same time, the blueshifts disappear from the spectrum and Bowen fluorescence lines (N iii) become prominent, implying a source of far-UV photons, while the X-ray light curve peaks at ≈1041 erg s−1. Assuming that these X-rays are from prompt accretion, the size and mass of the outflow are consistent with the reprocessing layer needed to explain the large optical to X-ray ratio in this and other optical TDEs, possibly favouring accretion-powered over collision-powered outflow models.

Nicholl, M.↗
DOE OSTI2022

Accretion disc sizes from continuum reverberation mapping of AGN selected from the ZTF survey

ABSTRACT We present the accretion disc-size estimates for a sample of 19 active galactic nuclei (AGNs) using the optical g-, r-, and i-band light curves obtained from the Zwicky Transient Facility survey. All the AGNs have reliable supermassive black hole (SMBH) mass estimates based on previous reverberation mapping measurements. The multiband light curves are cross-correlated, and the reverberation lag is estimated using the Interpolated Cross-Correlation Function method and the Bayesian method using the javelin code. As expected from the disc-reprocessing arguments, the g − r band lags are shorter than the g − i band lags for this sample. The interband lags for all, but five sources, are larger than the sizes predicted from the standard Shakura Sunyaev (SS) analytical model. We fit the light curves directly using a thin disc model implemented through the javelin code to get the accretion disc sizes. The disc sizes obtained using this model are on an average 3.9 times larger than the prediction based on the SS disc model. We find a weak correlation between the disc sizes and the known physical parameters, namely the luminosity and the SMBH mass. In the near future, a large sample of AGNs covering broader ranges of luminosity and SMBH mass from large photometric surveys would be helpful in a better understanding of the structure and physics of the accretion disc.

Jha, Vivek Kumar (ORCID:0000000232776335)↗
DOE OSTI2024

Establishing accretion flares from supermassive black holes as a source of high-energy neutrinos

ABSTRACT The origin of cosmic high-energy neutrinos remains largely unexplained. For high-energy neutrino alerts from IceCube, a coincidence with time-variable emission has been seen for three different types of accreting black holes: (1) a gamma-ray flare from a blazar (TXS 0506+056), (2) an optical transient following a stellar tidal disruption event (TDE; AT2019dsg), and (3) an optical outburst from an active galactic nucleus (AGN; AT2019fdr). For the latter two sources, infrared follow-up observations revealed a powerful reverberation signal due to dust heated by the flare. This discovery motivates a systematic study of neutrino emission from all supermassive black hole with similar dust echoes. Because dust reprocessing is agnostic to the origin of the outburst, our work unifies TDEs and high-amplitude flares from AGN into a population that we dub accretion flares. Besides the two known events, we uncover a third flare that is coincident with a PeV-scale neutrino (AT2019aalc). Based solely on the optical and infrared properties, we estimate a significance of 3.6σ for this association of high-energy neutrinos with three accretion flares. Our results imply that at least ∼10 per cent of the IceCube high-energy neutrino alerts could be due to accretion flares. This is surprising because the sum of the fluence of these flares is at least three orders of magnitude lower compared to the total fluence of normal AGN. It thus appears that the efficiency of high-energy neutrino production in accretion flares is increased compared to non-flaring AGN. We speculate that this can be explained by the high Eddington ratio of the flares.

Astronomy & Astrophysics↗
DOE OSTI2022

Synthetic diversity in the preparation of metallic uranium

Uranium metal is associated with several aspects of nuclear technology; it is used as fuel for research and power reactors, targets for medical isotope productions, explosive for nuclear weapons and precursors in synthetic chemistry. The study of uranium metal at the laboratory scale presents the opportunity to evaluate metallic nuclear fuels, develop new methods for metallic spent fuel reprocessing and advance the science relevant to nuclear forensics and medical isotope production. Since its first isolation in 1841, from the reaction of uranium chloride and potassium metal, uranium metal has been prepared by solid-state reactions and in solution by electrochemical, chemical and radiochemical methods. The present review summarizes the methods outlined above and describes the chemistry associated with each preparation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Effect of simethicone on the bactericidal efficacy of a high-level disinfectant

Introduction.Simethicone is an over-the-counter product that is frequently used by clinicians during endoscopic procedures to reduce foaming and improve visualization. Published studies have found simethicone residue on endoscopes after cleaning and disinfecting the devices as per the manufacturer’s instructions. Some literature suggests that simethicone residue may reduce disinfection efficacy and increase the risk of patient infections. Gap Statement.However, there appears to be a lack of direct evidence in the literature to either disprove this or correlate simethicone presence with an increased microbial risk. Aim: Research was conducted to evaluate thein vitroimpact of simethicone on disinfection efficacy. Methodology.Bacteria were grown in a microtitre plate assay in the presence of a range of simethicone concentrations and then treated with a disinfectant. Bacterial growth was assessed by spotting each microtitre well onto an agar plate. Results.The results demonstrated that, under the conditions tested, simethicone did not reduce the efficacy of Cidex ortho-phthalaldehyde disinfectant, which demonstrated at least a 6-log unit reduction in bacterial viability. Additional experiments showed that direct exposure to 66 mg ml −1 of simethicone reduced bacterial viability. Conclusion.These results indicate that simethicone may not reduce the bactericidal efficacy of disinfectant during reprocessing, under certain conditions.

Microbiology↗
DOE OSTI2024

Deciphering the crystal structure of a novel nanobody against the NEIL1 DNA glycosylase

Nanobodies (VHHs) are single-domain antibodies with three antigenic CDR regions and are used in diverse scientific applications. Here, an ∼14 kDa nanobody (A5) specific for the endonuclease VIII (Nei)-like 1 or NEIL1 DNA glycosylase involved in the first step of the base-excision repair pathway was crystallized and its structure was determined to 2.1 Å resolution. The crystals posed challenges due to potential twinning and anisotropic diffraction. Despite inconclusive twinning indicators, reprocessing in an orthorhombic setting and molecular replacement in space groupP2 1 2 1 2 enabled the successful modeling of 96% of residues in the asymmetric unit, with finalR work andR free values of 0.199 and 0.229, respectively.

Biochemistry & Molecular Biology↗