Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REFLECTOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

HD 202772A b: A Transiting Hot Jupiter around a Bright, Mildly Evolved Star in a Visual Binary Discovered by TESS

We report the first confirmation of a hot Jupiter discovered by the Transiting Exoplanet Survey Satellite (TESS) mission: HD 202772A b. The transit signal was detected in the data from TESS Sector 1, and was confirmed to be of planetary origin through radial velocity (RV) measurements. HD 202772A b is orbiting a mildly evolved star with a period of 3.3 days. With an apparent magnitude of V = 8.3, the star is among the brightest and most massive known to host a hot Jupiter. Based on the 27 days of TESS photometry and RV data from the CHIRON, HARPS, and Tillinghast Reflector Echelle Spectrograph, the planet has a mass of 1.017{sub −0.068}{sup +0.070} M{sub J} and radius of 1.545{sub −0.060}{sup +0.052} R{sub J}, making it an inflated gas giant. HD 202772A b is a rare example of a transiting hot Jupiter around a quickly evolving star. It is also one of the most strongly irradiated hot Jupiters currently known.

79 ASTRONOMY AND ASTROPHYSICS↗

Pathways to IEC Standards for Heliostat Design Qualification and Site Acceptance in Central Receiver CSP Applications

This paper surveys the existing landscape of standards relevant to heliostats, identifies their gaps, and proposes a path forward to a comprehensive set of heliostat guidelines, technical specifications, and standards under the framework of International Electrotechnical Commission (IEC) TC 117. Gaps in existing guidelines and standards are surveyed using a three-tiered taxonomy: component-level, heliostat-level, and field-level. At each level, the gap analysis is followed by a proposal for a coordinated path forward on the development of standards. At the component level, advances in the understanding of wind loading should inform a technical specification for drives and structures. Reflectors require consolidation of measurement guidelines into existing standards documents. Communications & controls require technical standards to inform their selection and secure implementation. At the heliostat level, IEC 62817 (solar trackers) adequately characterizes drive systems, structures, and electronics, but requires adaptation to heliostats' use patterns, operating modes, and expected life cycles. IEC 62817 does not address heliostat beam quality and pointing accuracy, but the process for determining both is elaborated in the SolarPACES Guideline for Heliostat Performance Testing. This SolarPACES document requires two main modifications: adaptation to IEC language and inclusion of testing after heliostats which have undergone accelerated weathering and mechanical cycling (to understand performance degradation). At the field level, IEC 62862-4-2 addresses the function and control of heliostat fields but does not cover the statistically rigorous testing of heliostat groups, or field performance factors like security and soiling. The addition of documents under IEC-62862-4 is proposed to address this gap.

beam↗

Search for New Physics with the Compact Muon Solenoid Experiment and QIS-enabled Technology

Understanding the fundamental nature of dark matter (DM)---its cosmological origin, constituents, and interactions---is one of the most important questions in fundamental science today. In this thesis, I present two novel and highly complementary approaches to cover the gaps in sensitivity of current DM searches. The searches are enabled by a first-of-its-kind reconstruction technique to search for hidden-sector particles using the Compact Muon Solenoid (CMS) and by new advances in quantum sensing technology to search for axions and hidden-sector DM. In the first part of this thesis, I present a search for long-lived hidden sector particles, predicted by many extensions of the SM, using a novel technique to reconstruct decays of long-lived particles (LLPs) in the CMS muon detector. The innovative LLP reconstruction technique is sensitive to a broad range of LLP decays and to LLP masses below GeV. The search yields competitive sensitivity for proper lifetime 0.1--1000 m with the full Run 2 dataset recorded at the LHC between 2016--2018 at $\sqrt{s} = 13~$TeV. To extend the physics reach of this novel muon detector shower (MDS) signature, I present the model-independence of MDS and the reinterpretation of the search to a large number of LLP models, demonstrating its complementarity with proposed and existing dedicated LLP experiments. Finally, I present a new dedicated MDS trigger that improves the trigger efficiency by at least an order of magnitude and was deployed in 2022, at the start of Run 3 of the LHC operations. In the second part of the thesis, I present for the first time, the use of a novel quantum sensor, the low-noise and single-photon sensitive superconducting nanowire single photon detectors (SNSPDs), to directly detect dark matter. The low detection threshold and ultra-low dark count rate of SNSPDs can close the gap in DM discovery reach due to the current limitations in detector sensitivity. I will present my work on the development and characterization of SNSPDs for two entirely new experiments to directly detect axions via absorption and hidden-sector DM via electron scattering. The search for axions employs a novel broadband reflector technique with the Broadband Reflector Experiment for Axion Detection (BREAD). A unique parabolic mirror is then used to focus axion-converted photons to the SNSPDs, extending the reach to axion masses of 0.04--1 eV. On the other hand, by coupling the SNSPDs with gallium arsenide, a bright cryogenic scintillator well matched to SNSPD detection, a prototype sensing system can be built as a basis of new direct DM detection experiments capable of extending the discovery to DM masses as low as 1 MeV.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Nanoimprinted Diffraction Gratings for Light Trapping in Crystal-Silicon Film Photovoltaics

Crystal-silicon (c-Si) film photovoltaics hold the promise of combining the advantages of state-of-the-art wafer-silicon technology with the scalability and the inherently much lower cost of thin-film solar technologies. In the thickness range of 2-20 μm very effective light trapping is essential to absorb sufficient red and near-infrared (NIR) light and reach targeted efficiencies of 16% 18%, as defined by the U.S. National Solar Technology Roadmap. One proposed method is diffractive light trapping, which, at least in certain wavelength ranges, can theoretically outperform light trapping through random scattering at a rough surface or interface. The goals of this project were (1) to develop a nanoimprinting process for a high-refractive-index dielectric material, (2) to fabricate diffraction gratings as back-reflectors using this material, and (3) to demonstrate for a 2c-Si film an improvement in AM1.5 photon absorption of at least 80% relative to single-pass absorption. We achieved goals (1) and (2). We developed a soft-imprint method for sol-based titanium dioxide precursor films (index range 2.3-2.4) and integrated imprinted films in thin-film silicon devices. We did not fully reach goal (3): depending on the model used for interpretation of the optical experimental data, AM1.5 photon absorption was improved by only 53% (coherent electromagnetic model) to 66% (non-coherent ray-tracing model). When compared to a metallized flat reference film (double-pass absorption), the improvement due to the grating is only 6%, if the (more conservative) electromagnetic model is used. Other important achievements from this project were: • We perfected an imprinting method for another ceramic material, aluminum oxide phosphate, which is index-matched with glass. • We tested diffractive light trapping at different incidence angles and found positive evidence for light trapping for angles up to 50°, although the light-trapping efficiency decreased with increasing incidence angle. • The extent of the trapped wavelength range scales with the refractive index of the dielectric material. The full benefit of a high refractive index, however, is only achieved if the dielectric layer underneath the grating layer (the residual layer) is sufficiently thick (several 100 nm). For a very thin residual layer, the light wave is predominantly localized in the underlying material during diffraction, and this material's refractive index then determines the trapping range. The (welcomed) consequence is that if this material is the silicon absorber layer, e.g. in a thin-film superstrate configuration, a very large trapping range can be achieved even if a low-index dielectric is used. We tested this directly through light-trapping experiments in glass plates using two different imprinted dielectric materials, titanium dioxide (index range 2.3-2.4) and aluminum oxide phosphate (index 1.5), with thick and thin residual layers. • We tested both copper and aluminum as low-cost reflector alternatives to silver on the grating back sides. In the relevant wavelength range above 650 nm, copper not only has the same high reflectance as silver, but the diffraction efficiency is also on par with silver. • A total of five scientific publications resulting from this work have either been published or are in preparation for submission (see Detailed Technical Report, below). Two conference presentations were given. In conclusion, we successfully developed nanoimprinting techniques for two ceramic precursor materials and tested diffractive light trapping in c-Si and nc-Si:H thin-film devices. The measured amount of light trapping did not fully reach our target value. The lessons learned from this project, however, both concerning experimental techniques and theoretical/modeling methods, have been extensive. Light trapping remains a central issue in thin c-Si technology, and we recommend to the US Department of Energy to increase research in this important area.

14 SOLAR ENERGY↗

Dual wavelength laser damage testing for high energy lasers.

As high energy laser systems evolve towards higher energies, fundamental material properties such as the laser-induced damage threshold (LIDT) of the optics limit the overall system performance. The Z-Backlighter Laser Facility at Sandia National Laboratories uses a pair of such kiljoule-class Nd:Phosphate Glass lasers for x-ray radiography of high energy density physics events on the Z-Accelerator. These two systems, the Z-Beamlet system operating at 527nm/ 1ns and the Z-Petawatt system operating at 1054nm/ 0.5ps, can be combined for some experimental applications. In these scenarios, dichroic beam combining optics and subsequent dual wavelength high reflectors will see a high fluence from combined simultaneous laser exposure and may even see lingering effects when used for pump-probe configurations. Only recently have researchers begun to explore such concerns, looking at individual and simultaneous exposures of optics to 1064 and third harmonic 355nm light from Nd:YAG [1]. However, to our knowledge, measurements of simultaneous and delayed dual wavelength damage thresholds on such optics have not been performed for exposure to 1054nm and its second harmonic light, especially when the pulses are of disparate pulse duration. The Z-Backlighter Facility has an instrumented damage tester setup to examine the issues of laser-induced damage thresholds in a variety of such situations [2] . Using this damage tester, we have measured the LIDT of dual wavelength high reflectors at 1054nm/0.5ps and 532nm/7ns, separately and spatially combined, both co-temporal and delayed, with single and multiple exposures. We found that the LIDT of the sample at 1054nm/0.5ps can be significantly lowered, from 1.32J/cm{sup 2} damage fluence with 1054/0.5ps only to 1.05 J/cm{sup 2} with the simultaneous presence of 532nm/7ns laser light at a fluence of 8.1 J/cm{sup 2}. This reduction of LIDT of the sample at 1054nm/0.5ps continues as the fluence of 532nm/7ns laser light simultaneously present increases. The reduction of LIDT does not occur when the 2 pulses are temporally separated. This paper will also present dual wavelength LIDT results of commercial dichroic beam-combining optics simultaneously exposed with laser light at 1054nm/2.5ns and 532nm/7ns.

43 PARTICLE ACCELERATORS↗

Investigation of Supercells for Preparation of Homogenized Cross Sections for Prismatic Deep Burn VHTR Calculations

In Very High Temperature Reactors (VHTRs), the long mean-free-path and large migration area of neutrons leads to spectral influences between fuel and reflector zones over long distances. This presents significant challenges to the validity of the classic two-step approach of cross section preparation wherein infinite lattice transport calculations are performed on relatively small physical domains (e.g. single assembly) in order to compute homogenized few-group cross sections for whole core analysis. Effects of the inner and outer reflectors render infinite lattice calculations on a single peripheral fuel assembly quite inaccurate, while burnable poison locations affect neighboring assemblies as well. Use of transuranics-only (TRU) Deep Burn fuel in a prismatic VHTR (DB-VHTR) presents the additional challenge of producing vastly different neutron spectra between fresh and burned fuel. ?This paper presents the progress in seeking a systematic method for generation of diffusion theory data in optically thin, multiply-heterogeneous reactors in a production context. A companion paper presents the underlying theory and systematic development of the methodology. In the context of this work, a supercell refers to an extended domain surrounding a region of interest. The extended domain is used to decouple the solution in this region of interest from the boundary conditions of the problem. This is an extension of the concept of color set, which was demonstrated to work very well for light water reactors (LWR). However, a half-assembly in an LWR presents a greater neutronic depth (in mean free paths) than in a VHTR. ??In order to make the supercell calculations more computationally manageable, an initial calculation is performed on a small domain and individual cells (individual compacts or coolant channels with graphite surrounding) are homogenized then used in the supercell calculations. This allows faster computation on the larger domain while retaining the overall hexagonal geometry of the fuel blocks. An application of this supercell concept using the DRAGON transport code is evaluated in this work for its effectiveness and practicality as part of an overall cross section preparation scheme for prismatic DB-VHTR reactors. The sizes of supercells for a peripheral fuel block are evaluated using independence from boundary conditions as an indicator.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Enhancing VHTR Passive Safety and Economy with Thermal Radiation Based Direct Reactor Auxiliary Cooling System

One of the most important requirements for Gen. IV Very High Temperature Reactor (VHTR) is passive safety. Currently all the gas cooled version of VHTR designs use Reactor Vessel Auxiliary Cooling System (RVACS) for passive decay heat removal. The decay heat first is transferred to the core barrel by conduction and radiation, and then to the reactor vessel by thermal radiation and convection; finally the decay heat is transferred to natural circulated air or water systems. RVACS can be characterized as a surface based decay heat removal system. The RVACS is especially suitable for smaller power reactors since small systems have relatively larger surface area to volume ratio. However, RVACS limits the maximum achievable power level for modular VHTRs due to the mismatch between the reactor power (proportional to volume) and decay heat removal capability (proportional to surface area). When the relative decay heat removal capability decreases, the peak fuel temperature increases, even close to the design limit. Annular core designs with inner graphite reflector can mitigate this effect; therefore can further increase the reactor power. Another way to increase the reactor power is to increase power density. However, the reactor power is also limited by the decay heat removal capability. Besides the safety considerations, VHTRs also need to be economical in order to compete with other reactor concepts and other types of energy sources. The limit of decay heat removal capability set by using RVACS has affected the economy of VHTRs. A potential alternative solution is to use a volume-based passive decay heat removal system, called Direct Reactor Auxiliary Cooling Systems (DRACS), to remove or mitigate the limitation on decay heat removal capability. DRACS composes of natural circulation loops with two sets of heat exchangers, one on the reactor side and another on the environment side. For the reactor side, cooling pipes will be inserted into holes made in the outer or inner graphite reflector blocks. There will be gaps between these cooling pipes and their corresponding surrounding graphite surfaces. Graphite has an excellent heat conduction property. By taking advantage of this feature, we can have a volume-based method to remove decay heat. The scalability can be achieved, if needed, by employing more rows of cooling pipes to accommodate higher decay heat rates. Since heat can easily conduct through the graphite regions between the holes made for the cooling pipes, those cooling pipes located further away from the active core region can still be very effective in removing decay heat. By removing the limit on the decay heat removal capability due to the limited available surface area as in a RVACS, the reactor power and power density can be significantly increased, without losing the passive heat removal feature. This paper will introduce the concept of using DRACS to enhance VHTR passive safety and economics. Three design options will be discussed, depending on the cooling pipe locations. Analysis results from a lumped volume based model and CFD simulations will be presented.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A Fisheye Lens for Many Point PDV

The features of the fisheye lens are illustrated, including a design with reflector prisms. The fisheye fiber map and the beam footprint are shown. Fisheye rough-angle metrology was done and results presented. Next steps are given, including a smaller top fisheye lens element, longer reflector prisms with better mounting, and different fiber arrangements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Hazard Categorization Reduction via Nature of the Process Argument

This paper documents the Hazard Categorization (HC) and Critical Safety Evaluation (CSE) for activities performed using an Inspection Object (IO) in excess of the single parameter subcritical limit of 700 g of U-235. By virtue of exceeding the single parameter subcritical limit and the subsequent potential for criticality, the IO HC is initially categorized as HC2. However, a novel application of the nature of the process argument was employed to reduce the IO HC from HC2 to less than HC3 (LTHC3). The IO is composed of five separate uranium metal plates that total no greater than 3.82 kg of U-235 (U(20)). The IO is planned to be arranged in various configurations. As the IO serves as a standard for experimentation aimed at establishing techniques for detection of fissionable materials, it may be placed in close proximity to various reflectors, moderators, or both. The most reactive configurations of the IO were systematically evaluated and shown that despite the mass of U-235 and potential positioning near various reflectors and moderators, the IO cannot be assembled into a critical configuration. Therefore, the potential for criticality does not exist. With Department of Energy approval, a Hazards Assessment Document with high-level (facility-level) controls on the plates negates the potential for criticality and satisfies the nature of the process argument to reduce the HC from HC2 to LTHC3.

99 GENERAL AND MISCELLANEOUS↗

Supercell Depletion Studies for Prismatic High Temperature Reactors

The traditional two-step method of analysis is not accurate enough to represent the neutronic effects present in the prismatic high temperature reactor concept. The long range coupling of the various regions in high temperature reactors poses a set of challenges that are not seen in either LWRs or fast reactors. Unlike LWRs, which exhibit large, localized effects, the dominant effects in PMRs are, for the most part, distributed over larger regions, but with lower magnitude. The 1-D in-line treatment currently used in pebble bed reactor analysis is not sufficient because of the 2-D nature of the prismatic blocks. Considerable challenges exist in the modeling of blocks in the vicinity of reflectors, which, for current small modular reactor designs with thin annular cores, include the majority of the blocks. Additional challenges involve the treatment of burnable poisons, operational and shutdown control rods. The use of a large domain for cross section preparation provides a better representation of the neutron spectrum, enables the proper modeling of BPs and CRs, allows the calculation of generalized equivalence theory parameters, and generates a relative power distribution that can be used in compact power reconstruction. The purpose of this paper is to quantify the effects of the reflector, burnable poison, and operational control rods on an LEU design and to delineate an analysis approach for the Idaho National Laboratory. This work concludes that the use of supercells should capture these long-range effects in the preparation of cross sections and along with a set of triangular meshes to treat BPs, and CRs a high fidelity neutronics computation is attainable.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A Local Incident Flux Response Expansion Transport Method for Coupling to the Diffusion Method in Cylindrical Geometry

A local incident flux response expansion transport method is developed to generate transport solutions for coupling to diffusion theory codes regardless of their solution method (e.g., fine mesh, nodal, response based, finite element, etc.) for reactor core calculations in both two-dimensional (2-D) and three-dimensional (3-D) cylindrical geometries. In this approach, a Monte Carlo method is first used to precompute the local transport solution (i.e., response function library) for each unique transport coarse node, in which diffusion theory is not valid due to strong transport effects. The response function library is then used to iteratively determine the albedo coefficients on the diffusion-transport interfaces, which are then used as the coupling parameters within the diffusion code. This interface coupling technique allows a seamless integration of the transport and diffusion methods. The new method retains the detailed heterogeneity of the transport nodes and naturally constructs any local solution within them by a simple superposition of local responses to all incoming fluxes from the contiguous coarse nodes. A new technique is also developed for coupling to fine-mesh diffusion methods/codes. The local transport method/module is tested in 2-D and 3-D pebble-bed reactor benchmark problems consisting of an inner reflector, an annular fuel region, and a controlled outer reflector. It is found that the results predicted by the transport module agree very well with the reference fluxes calculated directly by MCNP in both benchmark problems.

99 GENERAL AND MISCELLANEOUS↗

Ultra-thin ohmic contacts for p-type nitride light emitting devices

A flip-chip semiconductor based Light Emitting Device (LED) can include an n-type semiconductor substrate and an n-type GaN epi-layer on the substrate. A p-type GaN epi-layer can be on the n-type GaN epi-layer and a metal ohmic contact p-electrode can be on the p-type GaN epi-layer, where the metal ohmic contact p-electrode can have an average thickness less than about 25 .ANG.. A reflector can be on the metal ohmic contact p-electrode and a metal stack can be on the reflector. An n-electrode can be on the substrate opposite the n-type GaN epi-layer and a bonding pad can be on the n-electrode.

42 ENGINEERING↗

Combined raman and IR fiber-based sensor for gas detection

A double-pass fiber-optic based spectroscopic gas sensor delivers Raman excitation light and infrared light to a hollow structure, such as a hollow fiber waveguide, that contains a gas sample of interest. A retro-reflector is placed at the end of this hollow structure to send the light back through the waveguide where the light is detected at the same end as the light source. This double pass retro reflector design increases the interaction path length of the light and the gas sample, and also reduces the form factor of the hollow structure.

47 OTHER INSTRUMENTATION↗

Micromachined force-balance feedback accelerometer with optical displacement detection

An accelerometer includes a proof mass and a frame that are formed in a handle layer of a silicon-on-an-insulator (SOI). The proof mass is separated from the frame by a back-side trench that defines a boundary of the proof mass. The accelerometer also includes a reflector coupled to a top surface of the proof mass. An optical detector is located above the reflector at the device side. The accelerometer further includes at least one suspension spring. The suspension spring has a handle anchor that extends downwards from the device side to the handle layer to mechanically support upward and downward movement of the proof mass relative to a top surface of the proof mass.

42 ENGINEERING↗

Results from Coupled Optical and Electrical Sentaurus TCAD Models of a Gallium Phosphide on Silicon Electron Carrier Selective Contact Solar Cell

We report results from coupled optical and electrical Sentaurus TCAD models of a gallium phosphide (GaP) on silicon electron carrier selective contact (CSC) solar cell. Detailed analyses of current and voltage performance are presented for devices having substrate thicknesses of 10 μm, 50 μm, 100 μm and 150 μm, and with GaP/Si interfacial quality ranging from very poor to excellent. Ultimate potential performance was investigated using optical absorption profiles consistent with light trapping schemes of random pyramids with attached and detached rear reflector, and planar with an attached rear reflector. Results indicate Auger-limited open-circuit voltages up to 787 mV and efficiencies up to 26.7% may be possible for front-contacted devices.

Limpert, Steven↗

Application of U10Mo Fuel for Space Fission Power Applications - White Paper

A novel reactor design has been proposed for space applications to provide hundreds of watts to one or two kilowatts of electrical power. The reactor concept proposed uses the alloy U10Mo (uranium with 10 weight percent molybdenum) as the fuel. This fuel was selected for its high uranium density, high thermal conductivity, and excellent neutronic characteristics for this application. The core is surrounded by a BeO reflector. Heat is carried from the reactor by liquid metal heat pipes. A shadow shield of LiH tungsten is also utilized to reduce the neutron and gamma radiation dose to the rest of the spacecraft. This design represents a best effort at minimizing the complexity of the fission system and reducing the mass of the system. The compact nature of the block UMo core and BeO radial reflector allows the reactor diameter to be as small as practical while still meeting the neutronic and thermal power demands. This directly results in a reduced shield mass since the reactor diameter dictates the footprint of the radiation shield. The use of heat pipes offers a straightforward primary heat transport approach using proven liquid-metal heat pipe technology. Further, the elimination of a liquid core coolant system heat transport components, both at the reactor side and radiator side, contributes to reducing the total part-count and lowering system mass. The proposed reactor is using a fuel that is being developed by DOE, but there are significant differences in the fuels enrichment, operating conditions and the physical shape of the fuel itself. This paper attempts to highlight some of the basic consideration and needs that would be expected to be met in developing this fuel and qualifying it for use.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

All fiber passively Q-switched laser

Embodiments relate to an all fiber passively Q-switched laser. The laser includes a large core doped gain fiber having a first end. The large core doped gain fiber has a first core diameter. The laser includes a doped single mode fiber (saturable absorber) having a second core diameter that is smaller than the first core diameter. The laser includes a mode transformer positioned between a second end of the large core doped gain fiber and a first end of the single mode fiber. The mode transformer has a core diameter that transitions from the first core diameter to the second core diameter and filters out light modes not supported by the doped single mode fiber. The laser includes a laser cavity formed between a first reflector positioned adjacent the large core doped gain fiber and a second reflector positioned adjacent the doped single mode fiber.

42 ENGINEERING↗

Radiation imaging system

A radiation imaging system includes a casing and a camera disposed inside the casing. A first field of view through the casing exposes the camera to light from outside of the casing. An image plate is disposed inside the casing, and a second field of view through the casing to the image plate exposes the image plate to high-energy particles produced by a radioisotope outside of the casing. An optical reflector that is substantially transparent to the high-energy particles produced by the radioisotope is disposed with respect to the camera and the image plate to reflect light to the camera and to allow the high-energy particles produced by the radioisotope to pass through the optical reflector to the image plate.

47 OTHER INSTRUMENTATION↗