Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Electrical properties of TiN on gallium nitride grown using different deposition conditions and annealing

This study evaluates the thermal stability of different refractory metal nitrides used as Schottky electrodes on GaN. The results demonstrate that TiN, MoSiN, and MoN possess good rectification and adhesion strength, with barrier heights of 0.56, 0.54, and 0.36 eV, respectively. After thermal treatment at 850 °C for 1 min, the TiN and MoN electrodes still exhibit rectifying characteristics, while the MoSiN degrades to an ohmic-like contact. For further study, several TiN films are deposited using different N{sub 2}/Ar reactive/inert sputtering gas ratios, thereby varying the nitrogen content present in the sputtering gas. Ohmic-like contact is observed with the pure Ti contact film, and Schottky characteristics are observed with the samples possessing nitrogen in the film. The average Schottky barrier height is about 0.5 eV and remains virtually constant with varying nitrogen deposition content. After examining Raman spectra and x-ray photoelectron spectroscopy results, the increase in the film resistivity after thermal treatment is attributed to oxidation and/or nitridation. Films deposited with a medium (40% and 60%) nitrogen content show the best film quality and thermal stability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Laser annealing induced ferromagnetism in SrTiO{sub 3} single crystal

The appearance of ferromagnetic order up to 400 K upon KrF (248 nm) laser irradiation is reported in un-doped SrTiO{sub 3} (STO) single crystal. The high resolution x-ray photo emission spectroscopy (XPS) measurements reveal a strong shift of Sr-, Ti-, and O-related peaks. X-ray diffraction of laser annealed STO does not reveal a signature of either secondary magnetic or amorphous phases. 300 K X-band (∼9.543 GHz) angle-dependent electron paramagnetic resonance (EPR) measurements showed no evidence of additional magnetic peaks upon laser irradiation. XPS and EPR data did not provide a strong evidence of Ti{sup 3+} formation upon laser annealing. No differences in the visible 300 K Raman spectra of pristine and laser annealed STO are noticed. Interestingly, the magnetic moment is decreased by almost 10-fold upon oxygen annealing of laser annealed STO, inferring that oxygen vacancies play an important role in establishing the observed ferromagnetism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Selective probe of the morphology and local vibrations at carbon nanoasperities

We introduce a way to selectively probe local vibration modes at nanostructured asperities such as tips of carbon nanohorns. Our observations benefit from signal amplification in surface-enhanced Raman scattering (SERS) at sites near a silver surface. We observe nanohorn tip vibration modes in the range 200-500 cm{sup -1}, which are obscured in regular Raman spectra. Ab initio density functional calculations assign modes in this frequency range to local vibrations at the nanohorn cap resembling the radial breathing mode of fullerenes. Careful interpretation of our SERS spectra indicates presence of caps with 5 or 6 pentagons, which are chemically the most active sites. Changes in the peak intensities and frequencies with time indicate that exposure to laser irradiation may cause structural rearrangements at the cap.

36 MATERIALS SCIENCE↗

Influence of the voltage waveform during nanocomposite layer deposition by aerosol-assisted atmospheric pressure Townsend discharge

This work examines the growth dynamics of TiO{sub 2}-SiO{sub 2} nanocomposite coatings in plane-to-plane Dielectric Barrier Discharges (DBDs) at atmospheric pressure operated in a Townsend regime using nebulized TiO{sub 2} colloidal suspension in hexamethyldisiloxane as the growth precursors. For low-frequency (LF) sinusoidal voltages applied to the DBD cell, with voltage amplitudes lower than the one required for discharge breakdown, Scanning Electron Microscopy of silicon substrates placed on the bottom DBD electrode reveals significant deposition of TiO{sub 2} nanoparticles (NPs) close to the discharge entrance. On the other hand, at higher frequencies (HF), the number of TiO{sub 2} NPs deposited strongly decreases due to their “trapping” in the oscillating voltage and their transport along the gas flow lines. Based on these findings, a combined LF-HF voltage waveform is proposed and used to achieve significant and spatially uniform deposition of TiO{sub 2} NPs across the whole substrate surface. For higher voltage amplitudes, in the presence of hexamethyldisiloxane and nitrous oxide for plasma-enhanced chemical vapor deposition of inorganic layers, it is found that TiO{sub 2} NPs become fully embedded into a silica-like matrix. Similar Raman spectra are obtained for as-prepared TiO{sub 2} NPs and for nanocomposite TiO{sub 2}-SiO{sub 2} coating, suggesting that plasma exposure does not significantly alter the crystalline structure of the TiO{sub 2} NPs injected into the discharge.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetic and Structural Studies in Co- and Mn-implanted SrTiO3 Single Crystals

Micro Raman and static magnetization data on manganese or cobalt-implanted (at 3 or 5 at.%) strontium titanate (Mn,Co):SrTiO3 single crystals are presented. Micro Raman results reveal a cubic perovskite structure at 300 K with no evidence of any secondary phase. All samples show ferromagnetism both at 300 K and at 10 K. Moreover, micro Raman spectra at low temperature reveal the presence of polar ordering, which allow to consider the investigated materials as possible host matrices for multiferroic phenomena. Obtained results are discussed in connection to supplementary outcomes derived by content, optical absorption and electron paramagnetic resonance (EPR) measurements.

36 MATERIALS SCIENCE↗

Effect of nonmagnetic alkaline-earth dopants on magnetic properties of BiFeO{sub 3} thin films

Bi{sub 0.95}A{sub 0.05}FeO{sub 3} (A = Ba, Sr, Ca) thin films were deposited on (111) Pt/Ti/SiO{sub 2}/Si substrates via chemical solution deposition. The magnetization of the doped specimens increases sharply as compared to that of pure BiFeO{sub 3}, and it increases as the doped ionic radius gets larger. X-ray diffraction analysis reveals that the films are single phase, and no other extra magnetic phases are detected. X-ray photoelectron spectroscopy analysis suggests that the content of Fe{sup 3+} increases and that that of Fe{sup 2+} decreases. According to the x-ray diffraction and Raman analyses, there are corresponding changes in the lattice parameters and the Raman spectra as the doped ionic radius gets larger. These results indicate that neither the magnetic coupling of Fe{sup 2+} nor the parasitic magnetic phases could be the origin of the magnetization improvement, and we consider that the magnetization improvement mainly originates from the doped ionic radius size effect.

36 MATERIALS SCIENCE↗

Direct growth of nano-crystalline graphite films using pulsed laser deposition with in-situ monitoring based on reflection high-energy electron diffraction technique

We report an experimental method to overcome the long processing time required for fabricating graphite films by a transfer process from a catalytic layer to a substrate, as well as our study of the growth process of graphite films using a pulsed laser deposition combined with in-situ monitoring based on reflection high-energy electron diffraction technique. We monitored the structural evolution of nano-crystalline graphite films directly grown on AlN-coated Si substrates without any catalytic layer. We found that the carbon films grown for less than 600 s cannot manifest the graphite structure due to a high defect density arising from grain boundaries; however, the carbon film can gradually become a nano-crystalline graphite film with a thickness of approximately up to 5 nm. The Raman spectra and electrical properties of carbon films indicate that the nano-crystalline graphite films can be fabricated, even at the growth temperature as low as 850 °C within 600 s.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Growth and characterization of the nonlinear optical single crystal: L-Lysinium trifluoroacetate

A novel organic nonlinear optical (NLO) crystal, L-lysinium trifluoroacetate (with the molecular formula as (H{sub 3}N){sup +}CH{sub 2}CH{sub 2}CH{sub 2}CH{sub 2}CH(H{sub 3}N){sup +}COO{sup -}{center_dot}CF{sub 3}COO{sup -}), was grown by the controlled evaporation of its aqueous solution. The X-ray powder diffraction was used to determine its cell parameters. The calculated results based on the diffraction data reveal that L-lysinium trifluoroacetate belongs to the monoclinic crystallographic system, space group P2{sub 1}, with cell parameters: a = 5.698(5), b = 23.542(8), c = 8.500(6) A, {beta} = 91.62(9) deg., V = 1139.96 A{sup 3}. The grown crystals were characterized by the elemental analyses, Fourier transform infrared and Raman spectra. Experiments of thermogravimetric (TG) and differential thermal analysis (DTA) were carried out to study its thermal properties. The optical behaviours, including transmission spectrum and second harmonic generation (SHG), were investigated to study its linear and nonlinear optical properties. Optical nonlinearities were analyzed and discussed involved with its crystal structure.

36 MATERIALS SCIENCE↗

Nanodiamonds with SiV colour centres for quantum technologies

Properties of silicon-vacancy (SiV) colour centres in ultra-nanosize diamonds are studied. Nanodiamonds are obtained at a high temperature and pressure, which induced transformations in mixtures of organic and hetero-organic compounds without metal-catalysts. The size distribution of grown nanodiamonds is determined by the methods of transmission electron microscopy and atomic-force microscopy, as well as by using the model of phonon spatial localisation. In addition, Raman spectra of various nanodiamonds and luminescence properties of SiV-centres are investigated. (laser applications and other topics in quantum electronics)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electron beam exposure mechanisms in hydrogen silsesquioxane investigated by vibrational spectroscopy and in-situ electron beam induced desorption

Hydrogen Silsesquioxane (HSQ) is used as a high-resolution resist with resolution down below 10nm half-pitch. This material or materials with related functionalities could have widespread impact in nanolithography and nanoscience applications if the exposure mechanism was understood and instabilities controlled. Here we have directly investigated the exposure mechanism using vibrational spectroscopy (both Raman and Fourier transform Infrared) and electron beam desorption spectrocscopy (EBDS). In the non-networked HSQ system, silicon atoms sit at the corners of a cubic structure. Each silicon is bonded to a hydrogen atom and bridges 3 oxygen atoms (formula: HSiO3/2). For the first time, we have shown, via changes in the Si-H2 peak at ~;;2200 cm -1 in the Raman spectra and the release of SiHx products in EBID, that electron-bam exposed materials crosslinks via a redistribution reaction. In addition, we observe the release of significantly more H2 than SiH2 during EBID, which is indicative of additional reaction mechanisms. Additionally, we compare the behavior of HSQ in response to both thermal and electron-beam induced reactions.

36 MATERIALS SCIENCE↗

Growth and characterization of kesterite Cu{sub 2}ZnSn(S{sub x}Se{sub 1−x}){sub 4} crystals for photovoltaic applications

Highlights: • Cu{sub 2}ZnSn(S{sub x}Se{sub 1−x}){sub 4} crystals were grown using vertical gradient freeze technique. • Grown CZTSSe crystals exhibited highly crystalline tetragonal kesterite structure. • Grown ingot showed a homogeneous, stoichiometric composition along the growth axis. • Cu-rich particulates were observed along the polycrystalline grain boundaries. • Large volume of high quality CZTSSe can be grown using this novel VGF method. - Abstract: Cu{sub 2}ZnSn(S{sub x}Se{sub 1−x}){sub 4} (CZTSSe) bulk crystals have been grown for the first time, in multi-gram quantities, using a novel vertical gradient freeze (VGF) technique. Large grain polycrystalline CZTSSe ingot with grain sizes ∼0.2–0.5 mm was grown in a vacuum sealed quartz ampoule. Structural, compositional, and electronic properties of the ingot were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray spectroscopy (EDS), and van der Pauw measurements. XRD analysis showed highly crystalline tetragonal structure corresponding to kesterite CZTSSe with lattice constants of a = 5.563 Å, and c = 11.09 Å (c/2a = 0.997) and Raman spectra confirmed the formation of single phase CZTSSe. High-resolution XPS spectra confirmed the formation of metal-sulfoselenides. The ingot along the growth axis showed a homogeneous near stoichiometric elemental distribution corresponding to Cu/(Zn + Sn) = 0.94 and Zn/Sn = 0.98. EDS mapping on the ingot's outer surface revealed formation of islanded Cu-rich droplets at the grain boundaries. Grown crystals exhibited p-type conductivity with a measured bulk resistivity of ∼51 Ω cm.

36 MATERIALS SCIENCE↗

Synthesis and characterization of CoFe{sub 2}O{sub 4} nanoparticles with high coercivity

Single crystalline CoFe{sub 2}O{sub 4} nanoparticles with high coercivity were prepared via a one-step hydrothermal method. The shape and size of the nanocrystals (in the range of 20–100 nm) can be controlled by varying synthesis parameters such as the concentration of NaOH and CTAB. X-ray diffraction and Raman spectra analysis confirmed that all the as-synthesized nanoparticles have a face centered cubic spinel crystal structure. HRTEM observation of particles shows interlayer spacing 0.48 nm of (111) lattice planes. A coercive force up to 5.0 kOe and saturation magnetization of 73 emu/g was achieved at room temperature for the 40 nm CoFe{sub 2}O{sub 4} nanoparticles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Emission Analysis Of Pr{sup 3+}: PVP And Nd{sup 3+}: PVP Films

Here we report on the results concerning the absorption and emission spectra of RE{sup 3+} (Pr{sup 3+} or Nd{sup 3+}) doped PVP polymer films. The absorption spectrum of Pr{sup 3+}: PVP polymer film has shown three absorption bands at 444 nm ({sup 3}H{sub 4{yields}}{sup 3}P{sub 2}), 469nm ({sup 3}H{sub 4{yields}}{sup 3}P{sub 1}) and 481nm ({sup 3}H{sub 4{yields}}{sup 3}P{sub 0}). From the Pr{sup 3+}: PVP polymer film, an emission at 603 nm ({sup 1}D{sub 2{yields}}{sup 3}H{sub 4}) has been observed with an excitation at 443 nm ({sup 3}H{sub 4{yields}}{sup 3}P{sub 2}). The absorption spectrum of Nd{sup 3+}: PVP polymer film has exhibited eleven absorption bands at 324 nm, 383 nm, 432 nm, 462 nm, 511 nm, 526 nm, 580 nm, 686 nm, 746 nm, 799 nm, and 869 nm which are assigned to the electronic transitions of {sup 4}I{sub 9/2{yields}}{sup 4}D{sub 7/2}, {sup 4}I{sub 9/2{yields}}{sup 2}D{sub 3/2}, {sup 4}I{sub 9/2{yields}}{sup 4}P{sub 1/2}, {sup 4}I{sub 9/2{yields}}{sup 4}G{sub 11/2}, {sup 4}I{sub 9/2{yields}}{sup 4}G{sub 9/2}, {sup 4}I{sub 9/2{yields}}{sup 4}G{sub 7/2}, {sup 4}I{sub 9/2{yields}}{sup 4}G{sub 5/2}, {sup 4}I{sub 9/2{yields}}{sup 2}F{sub 9/2}, {sup 4}I{sub 9/2{yields}}{sup 2}F{sub 7/2}, {sup 4}I{sub 9/2{yields}}{sup 2}H{sub 9/2} and {sup 4}I{sub 9/2{yields}}{sup 4}F{sub 3/2} respectively. From the Nd{sup 3+}: PVP polymer film, an emission transition has been measured at 1055 nm ({sup 4}F{sub 3/2{yields}}{sup 4}I{sub 11/2}) with an excitation at 324 nm ({sup 4}I{sub 9/2{yields}}{sup 4}D{sub 7/2}). For the host polymer film, structural properties have been studied from the measurement of XRD, FTIR, Raman spectra. For this film thermal properties have also been investigated from the measured profiles of TGA-DTA.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Swift heavy ion induced structural changes in CdS thin films possessing different microstructures: A comparative study

This study is carried out to verify the role of thin film microstructure in determining the energy relaxation processes of swift heavy ions in CdS polycrystalline thin films. Two sets of CdS thin film samples, differing in their microstructures, prepared using thermal evaporation and spray pyrolysis, are irradiated with 100 MeV Ag ions using Pelletron accelerator. It is observed that the effects produced differ significantly in the two films. For the evaporated films, defect annealing dominates for lower irradiation fluences but at higher fluences the effects due to defect creation and their migration are dominant. A transformation from the metastable cubic to hexagonal phase together with the creation of a significant amount of compressive strain is seen in these films for irradiation at the highest fluence. The optical absorption of the samples shows an increase in band gap from 2.34 eV for the as grown film to 2.43 eV for the sample irradiated at the highest fluence that is further confirmed by photoluminescence (PL) studies. In contrast, the spray deposited samples undergo a significant improvement of crystalline quality for all fluences as shown by an increase in x-ray diffraction peak intensity, sharper optical absorption edge, reduction in defect PL intensity, and removal of asymmetry in the line shape of the longitudinal optical phonon on its lower wavenumber side in Raman spectra.

36 MATERIALS SCIENCE↗

Resonance Raman study of the A-band short-time photodissociation dynamics of 2,5-di-iodothiophene

Resonance Raman spectra were obtained for 2,5-di-iodothiophene in cyclohexane solution with excitation wavelengths in resonance with its A-band absorption. These spectra indicate that the Franck-Condon region photodissociation dynamics have multidimensional character with motion mostly along the nominal symmetric C{sub 2}C{sub 3}/C{sub 4}C{sub 5} stretch {nu}{sub 2} (1388 cm{sup -1}) of the thienyl ring and this is accompanied by motions along the nominal symmetric CSC stretch {nu}{sub 6} (640 cm{sup -1}), the nominal symmetric C-I stretch {nu}{sub 7} (187 cm{sup -1}), the nominal antisymmetric CSC stretch {nu}{sub 19} (728 cm{sup -1}), the nominal antisymmetric C{sub 2}C{sub 3}/C{sub 4}C{sub 5} stretch {nu}{sub 16} (1497 cm{sup -1}), the nominal C{sub 3}C{sub 4} stretch {nu}{sub 3} (1286 cm{sup -1}) and four other vibrational modes. A preliminary resonance Raman intensity analysis was done and the results for 2,5-di-iodothiophene were compared to previous results for 2-iodothiophene and di-iodomethane to discuss the mechanism of the symmetric breaking in the initial A-band photodissociation dynamics of 2,5-di-iodothiophene and 2-iodothiophene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Local Oscillations of Silicon–Silicon Bonds in Silicon Nitride

Raman spectra of films of nearly stoichiometric amorphous silicon nitride (a-Si{sub 3}N{sub 4}) reveal a contribution due to local oscillations of silicon–silicon (Si–Si) bonds. This observation directly confirms that the almost stoichiometric a-Si{sub 3}N{sub 4} contains Si–Si bonds, which, according to theoretical predictions, act as electron and hole traps that are responsible for the memory effect in Si{sub 3}N{sub 4}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The investigation of depoling mechanism of densified KNbO{sub 3} piezoelectric ceramic

Thermal depoling phenomena determine the upper temperature limit of the piezoelectric ceramics in application. In this paper, high-densified KNbO{sub 3} ceramics derived from single-crystalline nanostructures exhibited favorable piezoelectric constants d{sub 33}, which varied from 105 to 80 pC/N over a broad temperature range from 25 to 225 deg. C. In situ x-ray diffraction combined with Raman spectra demonstrate clearly the transition sequence of crystallographic orientations during thermal depoling process. The interaction between defect dipoles D and spontaneous polarization inside domains P{sub s} favored to preserve piezoelectric activity, while the spontaneous rotation of P{sub s} induced by the phase transition resulted in the deliquesce of d{sub 33}.

36 MATERIALS SCIENCE↗

Nanojunctions in conducting polypyrrole single nanowire made by focused electron beam: Charge transport characteristics

A focused electron (E)-beam with various doses was irradiated on the intended positions of conducting polypyrrole (PPy) single nanowire (NW) to fabricate nanojunctions. The current-voltage characteristics and their temperature dependence of the PPy single NW with nanojunctions were measured and analyzed. By increasing the E-beam dose and the number of nanojunctions, the current level of the single NW was dramatically decreased, and the conductance gap became more severe as the temperature decreased. The charge transport behavior varied from three-dimensional variable range hopping to fluctuation induced tunneling models, depending on the dose of focused E-beam. From micro-Raman spectra, the focused E-beam irradiation induced the de-doped states and conformational modification of polymer chains in the nanojunctions. The results suggest that the nanojunctions made by focused E-beam acted as a quasi-potential barrier for charge conduction in the conducting PPy single NW.

36 MATERIALS SCIENCE↗