Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Investigation of the SERS Spectra of Hydroquinone Molecule Adsorbed on Titanium Dioxide

The paper analyzes the SERS spectrum of hydroquinone adsorbed on nanoparticles of titanium dioxide (TiO{sub 2}). It is seen that the enhancement is stronger for a larger mean size of nanoparticles that is in agreement with an electrostatic approximation. In addition, it is found that there are the lines, which are forbidden in usual Raman spectra. There is also an enhancement caused both by the normal and tangential components of the electric field. This result is in agreement with the theory of SERS on semiconductor and dielectric substrates. The discovery of the forbidden lines indicates on the sufficiently large role of the strong quadrupole light-molecule interaction in such a system.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Syntheses, crystal structures and optical spectroscopy of Ln{sub 2}(SO{sub 4}){sub 3}.8H{sub 2}O (Ln=Ho, Tm) and Pr{sub 2}(SO{sub 4}){sub 3}.4H{sub 2}O

The lanthanide sulphate octahydrates Ln{sub 2}(SO{sub 4}){sub 3}.8H{sub 2}O (Ln=Ho, Tm) and the respective tetrahydrate Pr{sub 2}(SO{sub 4}){sub 3}.4H{sub 2}O were obtained by evaporation of aqueous reaction mixtures of trivalent rare earth oxides and sulphuric acid at 300 K. Ln{sub 2}(SO{sub 4}){sub 3}.8H{sub 2}O (Ln=Ho, Tm) crystallise in space group C2/c (Z=4, a{sub Ho}=13.4421(4) A, b{sub Ho}=6.6745(2) A, c{sub Ho}=18.1642(5) A, {beta}{sub Ho}=102.006(1) A{sup 3} and a{sub Tm}=13.4118(14) A, b{sub Tm}=6.6402(6) A, c{sub Tm}=18.1040(16) A, {beta}{sub Tm}=101.980(8) A{sup 3}), Pr{sub 2}(SO{sub 4}){sub 3}.4H{sub 2}O adopts space group P2{sub 1}/n (a=13.051(3) A, b=7.2047(14) A, c=13.316(3) A, {beta}=92.55(3) A{sup 3}). The vibrational and optical spectra of Ho{sub 2}(SO{sub 4}){sub 3}.8H{sub 2}O and Pr{sub 2}(SO{sub 4}){sub 3}.4H{sub 2}O are also reported. -- Graphical abstract: In the lanthanide sulphate octahydrates the cations form slightly undulated layers. Between the layers are voids in which sulphate tetrahedra and water molecules are located. The holmium compound exhibits an Alexandrite effect. Display Omitted Highlights: {yields} Determination of the optimum conditions for the growth of single-crystals of Ln{sub 2}(SO{sub 4}){sub 3}.8H{sub 2}O (Ln=Ho, Tm) and Pr{sub 2}(SO{sub 4}){sub 3}.4H{sub 2}O. {yields} Single-crystal structure elucidation of Ln{sub 2}(SO{sub 4}){sub 3}.8H{sub 2}O (Ln=Ho, Tm) including hydrogen bonds. {yields} Single-crystal structure determination of Pr{sub 2}(SO{sub 4}){sub 3}.4H{sub 2}O including hydrogen bonds. {yields} UV-vis spectra of Ho{sub 2}(SO{sub 4}){sub 3}.8H{sub 2}O and Pr{sub 2}(SO{sub 4}){sub 3}.4H{sub 2}O recorded and interpreted: Assignation of bands and clarification of the Alexandrite effect of the Ho compound. {yields} IR and Raman spectra of Ln{sub 2}(SO{sub 4}){sub 3}.8H{sub 2}O (Ln=Ho, Tm) and Pr{sub 2}(SO{sub 4}){sub 3}.4H{sub 2}O recorded and interpreted.

36 MATERIALS SCIENCE↗

Formation of Cu{sub 2}O and ZnO Crystal Layers by Magnetron Assisted Sputtering and Their Optical Characterization

Copper (I) oxide and zinc oxide films are formed on silicon and glassy quartz substrates by magnetron assisted sputtering. The thickness of the films is tens and hundreds of nanometers. The films are grown at different substrate temperatures and different oxygen pressures in the working chamber. The film samples are studied by the X-ray diffraction technique, scanning electron microscopy, and optical methods. It is established that an increase in the substrate temperature yields a change in the surface morphology of copper (I) oxide films towards the formation of well-pronounced crystallites. The reflectance and Raman spectra suggest that the quality of such films is close to that of bulk Cu{sub 2}O crystals produced by the oxidation of copper. As concerns ZnO films, an increase in the substrate temperature and an increase in the partial oxygen pressure make it possible to produce films, for which a sharp exciton structure is observed in the reflectance spectra and the emission of excitons bound at donors is observed in the luminescence spectra.

36 MATERIALS SCIENCE↗

Multiwalled carbon nanotubes and dispersed nanodiamond novel hybrids: Microscopic structure evolution, physical properties, and radiation resilience

We report the structure and physical properties of novel hybrids of multiwalled carbon nanotubes (MWCNTs) and ultradispersed diamond (UDD) forming nanocomposite ensemble that were subjected to 50, 100, and 10{sup 3} kGy gamma ray doses and characterized using various analytical tools to investigate hierarchical defects evolution. This work is prompted by recent work on single-walled CNTs and UDD ensemble [Gupta et al., J. Appl. Phys. 107, 104308 (2010)] where radiation-induced microscopic defects seem to be stabilized by UDD. The present experiments show similar effects where these hybrids display only a minimal structural modification under the maximum dose. Quantitative analyses of multiwavelength Raman spectra revealed lattice defects induced by irradiation assessed through the variation in prominent D, G, and 2D bands. A minimal change in the position of D, G, and 2D bands and a marginal increase in intensity of the defect-induced double resonant Raman scattered D and 2D bands are some of the implications suggesting the radiation coupling. The in-plane correlation length (L{sub a}) was also determined following Tunistra-Koenig relation from the ratio of D to G band (I{sub D}/I{sub G}) besides microscopic stress. However, we also suggest the following taking into account of intrinsic defects of the constituents: (a) charge transfer arising at the interface due to the difference in electronegativity of MWCNT C sp{sup 2} and UDD core (C sp{sup 3}) leading to phonon and electron energy renormalization; (b) misorientation of C sp{sup 2} at the interface of MWCNT and UDD shell (C sp{sup 2}) resulting in structural disorder; (c) softening or violation of the q{approx}0 selection rule leading to D band broadening and a minimal change in G band intensity; and (d) normalized intensity of D and G bands with 2D band help to distinguish defect-induced double resonance phenomena. The MWCNT when combined with nanodiamond showed a slight decrease in their conductance further affected by irradiation pointing at relatively good interfacial contact. Furthermore, owing to high thermal and electrical conductivity properties, they can facilitate potentially efficient heat-transfer applications and some results deduced using Nielsen's model is provided.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Surface functionalization of single-layer and multilayer graphene upon ultraviolet irradiation

The process of oxidation of single-layer and multilayer graphene films upon ultraviolet irradiation of the structure in water vapor was studied. The systematic features and distinctions between changes in the topographic and optical properties of graphene films composed of different numbers of layers were established. The possibility of surface functionalization accompanied by modification of the energy structure of graphene was shown. Differences between single-layer and multilayer graphene films in the mechanisms of oxidation on ultraviolet irradiation are discussed and analyzed. Correlation of the topographic imperfections of the properties of the graphene material with its structural defects observed in Raman spectra was shown.

36 MATERIALS SCIENCE↗

Lead pyrovanadate single crystal as a new SRS material

Lead pyrovanadate Pb{sub 2}V{sub 2}O{sub 7} single crystals of optical quality suitable for laser experiments are obtained. Vibrational modes are identified based on the analysis of the polarised Raman spectra of the single crystals. The main parameters (width at half maximum, peak and integral intensities) of the spectral lines most promising for SRS conversion in this material are estimated. These parameters are compared with the corresponding parameters of the most frequently used lines of known Raman materials: yttrium and gadolinium vanadates, potassium and lead tungstates, and lead molybdate. (active media)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystallization of Amorphous Germanium Films and Multilayer a-Ge/a-Si Structures upon Exposure to Nanosecond Laser Radiation

The processes of the crystallization of amorphous germanium films and multilayer germanium/silicon structures upon exposure to nanosecond (70 ns) ruby laser radiation (λ = 694 nm) are studied. The samples are grown on silicon and glassy substrates by plasma-enhanced chemical vapor deposition. Pulsed laser annealing of the samples is conducted in the range of pulse energy densities E{sub p} from 0.07 to 0.8 J cm{sup –2}. The structure of the films after annealing is determined by analyzing the scanning electron microscopy data and Raman spectra. It is established that, after annealing, the films are completely crystallized and, in this case, contain regions of coarse crystalline grains (>100 nm), whose fraction increases, as E{sub p} is increased, and reaches 40% of the area. From analysis of the position of the Raman peaks, it is conceived that the crystalline grains, whose dimensions exceed 100 nm, either contain structural defects or stretching strains. The correlation length of optical vibrations is determined from the phonon confinement model and found to increase from 5 to 8 nm, as E{sub p} is increased. Pulsed laser annealing of multilayer Ge(10 nm)/Si(5 nm) structures induces partial intermixing of the layers with the formation of Ge–Si alloys.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical and structural properties of SiO{sub x} films grown by molecular beam deposition: Effect of the Si concentration and annealing temperature

We study the properties of Si-rich silicon oxide SiO{sub x} (x < 2) films grown on silica substrates by molecular beam deposition, in a wide range of Si content and annealing temperatures. The measured refractive index and absorption coefficient are successfully described using the effective medium approximation and the chemical compositions measured by x-ray photoelectron spectroscopy (XPS). The Si-SiO{sub 2} phase separation and the degree of Si crystallization increase with the annealing temperature; however, even after annealing at 1200 Degree-Sign C, the samples contain a large proportion of suboxides and partially disordered Si. The Si Raman signal and the absorption coefficient are nearly proportional to the amount of elemental Si provided by XPS. On the other hand, the Si Raman signal is much weaker than it is expected from the amount of elemental Si, which can be explained by the presence of ultra-small Si nanocrystals (diameters < 2 nm) and/or by the difference in the properties of bulk and nanoscale Si. The 1.5-eV photoluminescence (PL) intensity is the highest for annealing at 1100-1150 Degree-Sign C and x = 1.8-1.9. In contrast, the PL quantum yield steadily increases when the intensity of the Si Raman signal decreases. This observation suggests that the Si nanocrystals observed in the Raman spectra are not direct light-emitting centers. The temperatures induced by laser light in these films are surprisingly high, especially at the highest Si content (x {approx} 1.3). The laser-induced temperature (up to {approx}350 Degree-Sign C) substantially down-shifts the Raman band of Si nanocrystals (in our experiments from {approx}518 to {approx}512 cm{sup -1}) and increases the absorption coefficient (by a factor of {approx}1.4).

36 MATERIALS SCIENCE↗

Graphene defect formation by extreme ultraviolet generated photoelectrons

We have studied the effect of photoelectrons on defect formation in graphene during extreme ultraviolet (EUV) irradiation. Assuming the major role of these low energy electrons, we have mimicked the process by using low energy primary electrons. Graphene is irradiated by an electron beam with energy lower than 80 eV. After e-beam irradiation, it is found that the D peak, I(D), appears in the Raman spectrum, indicating defect formation in graphene. The evolution of I(D)/I(G) follows the amorphization trajectory with increasing irradiation dose, indicating that graphene goes through a transformation from microcrystalline to nanocrystalline and then further to amorphous carbon. Further, irradiation of graphene with increased water partial pressure does not significantly change the Raman spectra, which suggests that, in the extremely low energy range, e-beam induced chemical reactions between residual water and graphene are not the dominant mechanism driving defect formation in graphene. Single layer graphene, partially suspended over holes was irradiated with EUV radiation. By comparing with the Raman results from e-beam irradiation, it is concluded that the photoelectrons, especially those from the valence band, contribute to defect formation in graphene during irradiation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The origin of the resistance change in GeSbTe films

Amorphous Ge{sub 2}Sb{sub 2}Te{sub 5} (a-GST) films were deposited by ion beam sputtering deposition. Extended x-ray absorption fine structure (EXAFS) data confirmed the existence of the Ge-Ge homopolar bonds in the films. Raman spectra also indicated that the Ge tetrahedral coordination in the a-GST film disappeared after an annealing treatment above 220 deg. C. Resonantly excited Ge L{sub 2,3} x-ray emission spectra (which probe occupied Ge 3d4s-electronic states) show that the phase change from the amorphous to crystalline state is accompanied by a reduction in the Ge I(L{sub 2})/I(L{sub 3}) intensity ratio due to a L{sub 2}L{sub 3}N Coster-Kronig transition, indicating that the number of carriers is increased in the Ge 4sp valence state. These findings constitute direct evidence for the contribution of the Ge electronic states to the resistivity change.

36 MATERIALS SCIENCE↗

Temperature dependence of Raman shifts in layered ReSe{sub 2} and SnSe{sub 2} semiconductor nanosheets

Transition metal dichalcogenides (TMDCs) are attractive for variety of nanoscale electronics and optoelectronics devices due to their unique properties. Despite growing progress in the research field of TMDCs, many of their properties are still unknown. In this letter, we report measurements of Raman spectra of rhenium diselenide (ReSe{sub 2}) and tin diselenide (SnSe{sub 2}) layered semiconductor nanosheets as a function of temperature (70–400 K). We analyze the temperature dependence of the positions of eight ReSe{sub 2} modes and SnSe{sub 2} A{sub 1g} mode. All observed Raman mode shifts exhibit nonlinear temperature dependence at low temperatures which is explained by optical phonon decay process into two or three acoustics phonons. The first order temperature coefficients (χ), determined for high temperatures, of rhenium diselenide Raman modes are in the range between −0.0033 and −0.0118 cm{sup −1}/K, whereas χ of tin diselenide A{sub 1g} mode was −0.0129 cm{sup −1}/K. Our findings are useful for further analysis of phonon and thermal properties of these dichalcogenide layered semiconductors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Composition, morphology, and properties of sodium-bismuth tungstate crystals

A correlation has been revealed between the formation conditions, composition, morphology, and physicochemical properties of NaBi{sub 1-x}(W{sub 1+y}O{sub 4}){sub 2} crystals (0 {<=} x {<=} 0.16, 0 {<=} y {<=} 0.11). The effect of melt deviation from stoichiometry on the decomposition rate of grown crystals under electron beam irradiation is shown by transmission electron microscopy. A nonuniform dopant distribution over the crystal boule cross-section is found by microprobe analysis. The Raman spectra of the samples depend on their crystallographic orientation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sublimation Crystal Growth of Yttrium Nitride

The sublimation recombination crystal growth of bulk yttrium nitride crystals is reported. The YN source material was prepared by reacting yttrium metal with nitrogen at 1200 C and 800 Torr total pressure. Crystals were produced by subliming this YN from the source zone, and recondensing it from the vapor as crystals at a lower temperature (by 50 C). Crystals were grown from 2000 to 2100 C and with a nitrogen pressure from 125 to 960 Torr. The highest rate was 9.64 10 5 mol/h (9.92 mg/h). The YN sublimation rate activation energy was 467.1 21.7 kJ/mol. Individual crystals up to 200 m in dimension were prepared. X-ray diffraction confirmed that the crystals were rock salt YN, with a lattice constant of 4.88 . The YN crystals were unstable in air; they spontaneously converted to yttria (Y2O3) in 2 4 h. A small fraction of cubic yttria was detected in the XRD of a sample exposed to air for a limited time, while non-cubic yttria was detected in the Raman spectra for a sample exposed to air for more than 1 h.

36 MATERIALS SCIENCE↗

Surface-Initiated Titanium-Mediated Coordination Polymerization from Catalyst-Functionalized Single and Multiwalled Carbon Nanotubes

Single (SWNTs) and multiwalled (MWNTs) carbon nanotubes were functionalized with a titanium alkoxide catalyst through a Diels-Alder cycloaddition reaction. The catalyst-functionalized carbon nanotubes (CNTs) were used for the surface initiated titanium-mediated coordination polymerizations of L-lactide (L-LA), -caprolactone (-CL) and n-hexyl isocyanate (HIC) employing the grafting from technique. 1H NMR, IR and Raman spectra showed that the precursor catalyst was successfully synthesized and covalently attached on the CNTs surface. Thermogravimetric analysis (TGA) revealed that the grafted poly(L-lactide) (PLLA) content could be controlled with time. The final polymer-grafted CNTs were readily dissolved in organic solvents as compared to the insoluble pristine and catalyst-functionalized CNTs. The presence of thick layers of polymers around the CNTs was observed through transmission electron microscopy (TEM). Differential scanning calorimetry (DSC) proved that the glass transition (Tg) and melting (Tm) temperatures of the PLLA are affected by the presence of the CNTs, while PLLA R-helix conformation remains intact, as revealed by the circular dichroism (CD) spectra.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Polymer Grafted Janus Multi-Walled Carbon Nanotubes

We describe a novel and facile strategy to modify the surface of carbon nanotubes (CNTs) with two chemically different polymer brushes utilizing the grafting from technique. A [4 + 2] Diels Alder cycloaddition reaction was used to functionalize multi-walled carbon nanotubes (MWNTs) with two different precursor initiators, one for ring opening polymerization (ROP) and one for atom transfer radical polymerization (ATRP). The binary functionalized MWNTs were used for the simultaneous surface initiated polymerizations of different monomers resulting in polymer grafted MWNTs that can form Janus type structures under appropriate conditions. 1H NMR, FTIR and Raman spectra showed that the precursor initiators were successfully synthesized and covalently attached on the CNT surface. Thermogravimetric analysis (TGA) revealed that the grafted polymer content varies when different monomer ratios and polymerization times are used. The presence of an organic layer around the CNTs was observed through transmission electron microscopy (TEM). Differential scanning calorimetry (DSC) proved that the glass transition (Tg) and melting (Tm) temperatures of the grafted polymers are affected by the presence of the CNTs, while circular dichroism (CD) spectra indicated that the PLLA ahelix conformation remains intact.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Raman Scattering from 1,3-Propanedithiol at a Hot Spot: Theory Meets Experiment

We compute the Raman spectra of 1,3-propanedithiol (PDT) in the gas phase, in methanol, linked either to the face or vertex of a finite tetrahedral Ag20 cluster, and linking two Ag20 clusters using tools of density functional theory. The calculated normal mode-dependent molecular polarizability derivative tensors are employed to simulate single molecule surface-enhanced Raman (SERS) spectra. This is achieved by rotating the polarizability tensors of an individual molecule with respect to explicitly defined vector components of the incident and scattered radiation. Our results provide a basis for understanding commonly observed phenomena in single molecule SERS spectroscopy.

Environmental Molecular Sciences Laboratory↗

Confocal Raman microscopy of self-assembled GeSi/Si(001) Islands

The method of confocal Raman microscopy is used for the first time to study the spatial distribution of elemental composition and elastic strains in self-assembled GexSi{sub 1-x}/Si(001) islands grown by the method of sublimation molecular-beam epitaxy in the GeH{sub 4} ambient. The lines related to vibrational modes Si-Si, Ge-Ge, and Si-Ge are identified in the Raman spectra measured in the regions with dimensions <100 nm on the surface of the samples. The spatial distribution of the Ge atomic fraction x in the Ge{sub x}Si{sub 1-x} alloy and of the elastic strain {epsilon} (averaged in depth over the island layer) have been calculated from the maps of the Raman shifts of the corresponding lines over the sample surface. The dependences of x and {epsilon} on the islands' growth temperature and on the nominal thickness of the deposited Ge layer have been studied.

36 MATERIALS SCIENCE↗

Neutron powder diffraction, and solid-state deuterium NMR analyses of Yb{sub 2}RuD{sub 6} and spectroscopic vibrational analysis of Yb{sub 2}RuD{sub 6} and Yb{sub 2}RuH{sub 6}

The crystal structure of Yb{sub 2}RuD{sub 6} has been determined by neutron powder diffraction and the results were consistent with the Fm3m (no. 225) space group, a=7.2352(18) A, with the atoms arranged according to the well-known K{sub 2}PtCl{sub 6} structure. No structural phase transition was observed in going from room temperature to 4 K. Raman spectra were not available due to fluorescence, but all fundamental bands and combination bands were assigned from FTIR and PAIR spectra only following previous studies for other alkaline earth and europium ruthenium ternary metal hydrides and deuterides. The deuterium nuclear quadrupole coupling constant, 40.9 kHz, leads to an ionic character of the Ru-D bond of 82%. - Graphical Abstract: Using PAIR (see figure above) and FTIR data spectroscopic vibrational assignments are reported for (a) Yb{sub 2}RuH{sub 6} and (b) Yb{sub 2}RuD{sub 6}. In addition, neutron powder diffraction structural elucidation data and deuterium NMR data are reported for Yb{sub 2}RuD{sub 6}. Highlights: > Yb{sub 2}RuD{sub 6} was prepared by a high temperature gas/solid phase reaction among YbD{sub 2}, Ru and D{sub 2}. > The crystal structure of Yb{sub 2}RuD{sub 6} was elucidated by powder neutron diffraction. > Yb{sub 2}RuD{sub 6} and Yb{sub 2}RuH{sub 6} were analyzed by infrared spectroscopy. > In addition, Yb{sub 2}RuD{sub 6} was analyzed with D NMR spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗