Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Production”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Theoretical analysis of the sequential proton-coupled electron transfer mechanisms for H2 oxidation and production pathways catalyzed by nickel molecular electrocatalysts

The design of electrocatalysts for the oxidation and production of H2 is important for the development of alternative energy sources. This paper focuses on the electrocatalysts, where denotes 1,5-diaza-3,7-diphosphacyclooctane ligands with substituent groups R and R' covalently bound to the phosphorus and nitrogen atoms, respectively. Theoretical methods are used to investigate the mechanism of the step in the catalytic cycle corresponding to – e– → for H2 oxidation and the reverse reaction for H2 production. This step involves electron transfer (ET) between the Ni complex and the electrode as well as proton transfer (PT) between the Ni and the N. The sequential mechanisms, PT–ET and ET–PT, are investigated for the following (R,R’) substituents: (Me,Me), (Ph,Ph), and (Ph,Bz), where Me, Ph, and Bz denote methyl, phenyl, and benzyl substituents. Density functional theory is used to calculate reduction potentials, pKas, and PT pathways, and Marcus theory is used to describe the electrochemical electron transfer, including the effects of solute and solvent reorganization energies. For the (Ph,Ph) and (Ph,Bz) systems, the sequential PT–ET mechanism would require surmounting a large free energy barrier for the initial PT step, followed by thermodynamically favorable or thermoneutral ET. The sequential ET–PT mechanism for these systems would require a relatively large initial applied overpotential, followed by a PT reaction with a relatively low free energy barrier. Consistent with experimental data, the calculated overpotential required for the initial reduction in the ET–PT mechanism is lower for the (Ph,Bz) system than for the (Ph,Ph) system. The concerted mechanism, in which the electron and proton transfer simultaneously without a stable intermediate, may be thermodynamically favorable and is a direction of future research. This material is based upon work supported as part of the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the US Department of Energy, Office of Science, Office of Basic Energy Sciences under FWP56073.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Large historical growth in global terrestrial gross primary production

Growth in terrestrial gross primary production (GPP) may provide a negative feedback for climate change. It remains uncertain, however, to what extent biogeochemical processes can suppress global GPP growth. In consequence, model estimates of terrestrial carbon storage and carbon cycle –climate feedbacks remain poorly constrained. Here we present a global, measurement-based estimate of GPP growth during the twentieth century based on long-term atmospheric carbonyl sulphide (COS) records derived from ice core, firn, and ambient air samples. Here, we interpret these records using a model that simulates changes in COS concentration due to changes in its sources and sinks, including a large sink that is related to GPP. We find that the COS record is most consistent with climate-carbon cycle model simulations that assume large GPP growth during the twentieth century (31% ± 5%; mean ± 95% confidence interval). Finally, while this COS analysis does not directly constrain estimates of future GPP growth it provides a global-scale benchmark for historical carbon cycle simulations.

54 ENVIRONMENTAL SCIENCES↗

Evaluation of Characterization Techniques for Iron Pipe Corrosion Products and Iron Oxide Thin Films

A common problem faced by drinking water studies is that of properly characterizing the corrosion products (CP) in iron pipescor synthetic Fe (hydr)oxides used to simulate the iron pipe used in municipal drinking-water systems. The present work compares the relative applicability of a suite of imaging and analytical techniques for the characterization of CPs and synthetic Fe oxide thin films and provide an overview of the type of data that each instrument can provide as well as their limitations to help researchers and consultants choose the best technique for a given task. Crushed CP from a water distribution system and synthetic Fe oxide thin films formed on glass surfaces were chosen as test samples for this evaluation. The CP and synthetic Fe oxide thin films were analyzed by atomic force microscopy (AFM), scanning electron microscopy (SEM), energy-dispersive spectroscopy, time-of-flight secondary ion mass spectrometry (ToF-SIMS), X-ray powder diffractometry (XRD), grazing incident diffractometry (GID), transmission electron microscopy (TEM), selected area electron diffraction, X-ray photoelectron spectroscopy (XPS), Fourier transform infrared, Mössbauer spectroscopy, Brunauer-Emmett-Teller N2 adsorption and Fe concentration was determined by the ferrozine method. XRD and GID were found to be the most suitable techniques for identification of the mineralogical composition of CP and synthetic Fe oxide thin films, respectively. AFM and a combined ToF-SIMS-AFM approach proved excellent for roughness and depth profiling analysis of synthetic Fe oxide thin films, respectively. Corrosion products were difficult to study by AFM due to their surface roughness, while synthetic Fe oxide thin films resisted most spectroscopic methods due to their limited thickness (118 nm). XPS analysis is not recommended for mixtures of Fe (hydr)oxides due to their spectral similarities. SEM and TEM provided great detail on mineralogical morphology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Morphology-dependent optical absorption and conduction properties of photoelectrochemical photocatalysts for H{sub 2} production: A case study

Efficient photoelectrochemical H{sub 2} production by solar irradiation depends not only on the photocatalyst's band gap and its band-edge positions but also on the detailed electronic nature of the bands, such as the localization or delocalization of the band edges and their orbital characteristics. These determine the carrier transport properties, reactivity, light absorption strength, etc. and significantly impact the material's efficiency as a photoconverter. The localization or delocalization of the band edges may arise either due to the orbital nature of the bands or the structural morphology of the material. A recent experimental report on a photocatalyst based on s/p orbitals showed very poor performance for H{sub 2} production despite the delocalized nature of the s/p bands as compared to the d-bands of transition metal oxides. It is then important to examine whether this poor performance is inherent to these materials or rather arises from some experimental limitations. A theoretical analysis by first-principle methods is well suited to shed light on this question.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cascade Spectroscopy and Recent {Xi}* Photo-production Results from CLAS

Doubly-strange baryon resonances provide new insights into baryon structure. The standard QCD Lagrangian implies that for every N* and {Delta}* resonance, there should be a corresponding {Xi}(cascade resonance). This is due to the flavor symmetry of the strong force. Therefore, one can investigate baryon structure by observing aspects of the doubly-strange baryons like regularities such as parity doublets. At energies above approximately 1.5 GeV, the light-quark baryon resonances are broad and overlap while the cascades in this range are narrow and therefore more readily observed. An overview of the world cascade spectrum and a comparison to the lighter baryon spectra will be presented. Recent results from an on-going analysis from the G12 (5.4 GeV) photo-production experiment using the CLAS detector at JLab will be highlighted.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Resonant particle production during inflation: a full analytical study

We revisit the study of the phenomenology associated to a burst of particle production of a field whose mass is controlled by the inflaton field and vanishes at one given instance during inflation. This generates a bump in the correlators of the primordial scalar curvature. We provide a unified formalism to compute various effects that have been obtained in the literature and confirm that the dominant effects are due to the rescattering of the produced particles on the inflaton condensate. We improve over existing results (based on numerical fits) by providing exact analytic expressions for the shape and height of the bump, both in the power spectrum and the equilateral bispectrum. We then study the regime of validity of the perturbative computations of this signature. Finally, we extend these computations to the case of a burst of particle production in a sector coupled only gravitationally to the inflaton.

79 ASTRONOMY AND ASTROPHYSICS↗

Electron-impact dissociation of XH{sub 2}{sup +} (X=B, C, N, O, F): Absolute cross sections for production of XH{sup +} and X{sup +} fragment ions

Absolute cross sections for electron-impact dissociation of XH{sub 2}{sup +} (X= B, C, N, O, F) producing XH{sup +} and X{sup +} ion fragments were measured in the 3- to 100-eV range using a crossed-electron-ion beams technique. Dissociative excitation of BD{sub 2}{sup +} and CH{sub 2}{sup +} producing B{sup +} and C{sup +}, respectively, show a propensity toward a two-body dissociation while the remaining species all tend to show a three-body dissociation dynamic. The BD{sup +} and CH{sup +} dissociative excitation channels show a large resonant-type contribution to the cross sections at {approx}10 eV. For the X{sup +} fragment ion production cross sections, a clear dependence on the threshold energy, as it relates to the rate of rise in the cross section above threshold, is observed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Pion production by protons on a thin beryllium target at 6.4, 12.3, and 17.5 GeV/c incident proton momenta

An analysis of inclusive pion production in proton-beryllium collisions at 6.4, 12.3, and 17.5 GeV/c proton beam momentum has been performed. The data were taken by Experiment 910 at the Alternating Gradient Synchrotron at the Brookhaven National Laboratory. The differential {pi}{sup +} and {pi}{sup -} production cross sections (d{sup 2}{sigma}/dpd{omega}) were measured up to 400 mrad in {theta}{sub {pi}} and up to 6 GeV/c in p{sub {pi}}. The measured cross section was fit with a Sanford-Wang parametrization.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Cold nuclear matter effects on J/{psi} production as constrained by deuteron-gold measurements at {radical}(s{sub NN})=200 GeV

We present a new analysis of J/{psi} production yields in deuteron-gold collisions at {radical}(s{sub NN})=200 GeV using data taken from the PHENIX experiment in 2003 and previously published in S. S. Adler et al. [Phys. Rev. Lett 96, 012304 (2006)]. The high statistics proton-proton J/{psi} data taken in 2005 are used to improve the baseline measurement and thus construct updated cold nuclear matter modification factors (R{sub dAu}). A suppression of J/{psi} in cold nuclear matter is observed as one goes forward in rapidity (in the deuteron-going direction), corresponding to a region more sensitive to initial-state low-x gluons in the gold nucleus. The measured nuclear modification factors are compared to theoretical calculations of nuclear shadowing to which a J/{psi} (or precursor) breakup cross section is added. Breakup cross sections of {sigma}{sub breakup}=2.8{sub -1.4}{sup +1.7} (2.2{sub -1.5}{sup +1.6}) mb are obtained by fitting these calculations to the data using two different models of nuclear shadowing. These breakup cross-section values are consistent within large uncertainties with the 4.2{+-}0.5 mb determined at lower collision energies. Projecting this range of cold nuclear matter effects to copper-copper and gold-gold collisions reveals that the current constraints are not sufficient to firmly quantify the additional hot nuclear matter effect.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Heavy quark production from jet conversions in a quark-gluon plasma

Recently, it has been demonstrated that the chemical composition of jets in heavy ion collisions is significantly altered compared to the jets in the vacuum. This signal can be used to probe the medium formed in nuclear collisions. In this study we investigate the possibility that fast light quarks and gluons can convert to heavy quarks when passing through a quark-gluon plasma. We study the rate of light to heavy jet conversions in a consistent Fokker-Planck framework and investigate their impact on the production of high-p{sub T} charm and bottom quarks at the Relativistic Heavy Ion Collider and the Large Hadron Collider.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Exclusive Initial-State-Radiation Production of the DDbar,D*Dbar, and D*D*bar Systems

We perform a study of the exclusive production of D{bar D}, D*{bar D}, and D*{bar D}* in initial-state-radiation events, from e{sup +}e{sup -} annihilations at a center-of-mass energy near 10.58 GeV, to search for charmonium and possible new resonances. The data sample corresponds to an integrated luminosity of 384 fb{sup -1} and was recorded by the BABAR experiment at the PEP-II storage rings. The D{bar D}, D*{bar D}, and D*{bar D}* mass spectra show clear evidence of several {psi} resonances. However, there is no evidence for Y(4260) {yields} D*{bar D} or Y(4260) {yields} D*{bar D}*.

43 PARTICLE ACCELERATORS↗

Production of {psi}(2S) mesons in pp collisions at 1.96 TeV

We have measured the differential cross section for the inclusive production of {psi}(2S) mesons decaying to {mu}{sup +}{mu}{sup -} that were produced in prompt or B-decay processes from pp collisions at 1.96 TeV. These measurements have been made using a data set from an integrated luminosity of 1.1 fb{sup -1} collected by the CDF II detector at Fermilab. For events with transverse momentum p{sub T}({psi}(2S))>2 GeV/c and rapidity |y({psi}(2S))|<0.6 we measure the integrated inclusive cross section {sigma}(pp{yields}{psi}(2S)X){center_dot}Br({psi}(2S){yields}{mu}{sup +}{mu}{sup -}) to be 3.29{+-}0.04(stat){+-}0.32(syst) nb.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Study of Higgs boson production and its b-b(bar) decay in gamma-gamma processes in proton-nucleus collisions at the LHC

We explore for the first time the possibilities to measure an intermediate-mass (m{sub H} = 115-140 GeV/c{sup 2}) Standard-Model Higgs boson in electromagnetic proton-lead (p Pb) interactions at the CERN Large Hadron Collider (LHC) via its b{bar b} decay. Using equivalent Weizsacker-Williams photon fluxes and Higgs effective field theory for the coupling {gamma}{gamma} {yields} H, we obtain a leading-order cross section of the order of 0.3 pb for exclusive Higgs production in elastic (p Pb {yields} {gamma}{gamma} p H Pb) and semielastic (p Pb {yields} {gamma}{gamma} X H Pb) processes at {radical}S{sub NN} = 8.8 TeV. After applying various kinematics cuts to remove the main backgrounds ({gamma}{gamma} {yields} b{bar b} and misidentified {gamma}{gamma} {yields} q{bar q} events), we find that a Higgs boson with m{sub H} = 120 GeV/c{sup 2} could be observed in the b{bar b} channel with a 3{sigma}-significance integrating 300 pb{sup -1} with an upgraded pA luminosity of 10{sup 31} cm{sup -2}s{sup -1}. We also provide for the first time semielastic Higgs cross sections, along with elastic t{bar t} cross sections, for electromagnetic pp, pA and AA collisions at the LHC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Single top and Higgs associated production at the LHC.

We study the production of a standard model (SM) Higgs boson in association with a single top quark and either a light jet or W boson at the LHC with a center of mass energy of 14 TeV. Because of the destructive interference of the contributing SM diagrams, the value of the top Yukawa coupling and the sign of the WWh coupling may be probed for Higgs masses above 150 GeV, where WW and ZZ are the dominant Higgs decays. We consider Higgs masses of m{sub h} = 120, 150, 180, and 200 GeV and devise experimental cuts to extract the signal from SM backgrounds and measure the top Yukawa coupling.

36 MATERIALS SCIENCE↗

Hadronic production of a Higgs boson and two jets at next-to-leading order

We perform an update of the next-to-leading order calculation of the rate for Higgs boson production in association with two jets. Our new calculation incorporates the full analytic result for the one-loop virtual amplitude. This new theoretical information allows us to construct a code including the decay of the Higgs boson without incurring a prohibitive penalty in computer running time. Results are presented for the Tevatron, where implications for the Higgs search are sketched, and also for a range of scenarios at the LHC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Production-decay interferences at next-to-leading order in QCD for t-channel single-top-quark production

We present a calculation of O({alpha}{sub s}) contributions to the process of t-channel single-top production and decay, which include virtual and real corrections arising from the interference of the production and decay subprocesses. The calculation is organized as a simultaneous expansion of the matrix elements in the couplings {alpha}{sub ew}, {alpha}{sub s} and the virtuality of the intermediate top quark, (p{sub t}{sup 2}-m{sub t}{sup 2})/m{sub t}{sup 2{approx}{Gamma}}{sub t}/m{sub t}, and extends earlier results beyond the narrow-width approximation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗