SEARCH · Engineering Papers

Results for “Polymer behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

All sources NASA NTRS DOE OSTI

NASA NTRS1992

The viscoelastic characterization of polymer materials exposed to the low-Earth orbit environment

Recent accomplishments in our research efforts have included the successful measurement of the thermal mechanical properties of polymer materials exposed to the low-earth orbit environment. In particular, viscoelastic properties were recorded using the Rheometrics Solids Analyzer (RSA 2). Dynamic moduli (E', the storage component of the elastic modulus, and E'', the loss component of the elastic modulus) were recorded over three decades of frequency (0.1 to 100 rad/sec) for temperatures ranging from -150 to 150 C. Although this temperature range extends beyond the typical use range of the materials, measurements in this region are necessary in the development of complete viscoelastic constitutive models. The experimental results were used to provide the stress relaxation and creep compliance performance characteristics through viscoelastic correspondence principles. Our results quantify the differences between exposed and control polymer specimens. The characterization is specifically designed to elucidate a constitutive model that accurately predicts the change in behavior of these materials due to exposure. The constitutive model for viscoelastic behavior reflects the level of strain, the rate of strain, and the history of strain as well as the thermal history of the material.

Strganac, Thomas↗

DOE OSTI2022

History Matching and Prediction of a Polymer Flood Pilot in Heavy Oil Reservoir on Alaska North Slope

The first-ever polymer flood pilot to enhance heavy oil recovery on Alaska North Slope is ongoing. After more than 3 years of polymer injection, significant benefit has been observed from the decrease in water cut from 65% to less than 15% in the project producers. The primary objective of this study is to develop a robust history-matched reservoir simulation model capable of predicting future polymer flood performance. In this work, the reservoir simulation model has been developed based on the geological model and available reservoir and fluid data. In particular, four high transmissibility strips were introduced to connect the injector-producer well pairs, simulating short-circuiting flow behavior that can be explained by viscous fingering and reproducing the water cut history. The strip transmissibilities were manually tuned to improve the history matching results during the waterflooding and polymer flooding periods, respectively. It has been found that higher strip transmissibilities match the sharp water cut increase very well in the waterflooding period. Then the strip transmissibilities need to be reduced with time to match the significant water cut reduction. The viscous fingering effect in the reservoir during waterflooding and the restoration of injection conformance during polymer flooding have been effectively represented. Based on the validated simulation model, numerical simulation tests have been conducted to investigate the oil recovery performance under different development strategies, with consideration for sensitivity to polymer parameter uncertainties. The oil recovery factor with polymer flooding can reach about 39% in 30 years, twice as much as forecasted with continued waterflooding. Besides, the updated reservoir model has been successfully employed to forecast polymer utilization, a valuable parameter to evaluate the pilot test’s economic efficiency. All the investigated development strategies indicate polymer utilization lower than 3.5 lbs/bbl in 30 years, which is less than that of the same polymer used in a polymer pilot in Argentina.

Wang, Xindan↗

NASA NTRS1975

Fundamental analysis of the failure of polymer-based fiber reinforced composites

A mathematical model predicting the strength of unidirectional fiber reinforced composites containing known flaws and with linear elastic-brittle material behavior was developed. The approach was to imbed a local heterogeneous region surrounding the crack tip into an anisotropic elastic continuum. This (1) permits an explicit analysis of the micromechanical processes involved in the fracture, and (2) remains simple enough to be useful in practical computations. Computations for arbitrary flaw size and orientation under arbitrary applied loads were performed. The mechanical properties were those of graphite epoxy. With the rupture properties arbitrarily varied to test the capabilities of the model to reflect real fracture modes, it was shown that fiber breakage, matrix crazing, crack bridging, matrix-fiber debonding, and axial splitting can all occur during a period of (gradually) increasing load prior to catastrophic failure. The calculations also reveal the sequential nature of the stable crack growth process proceding fracture.

Kanninen, M. F.↗

DOE OSTI2022

Superresolved Motions of Single Molecular Catalysts during Polymerization Show Wide Distributions

The motion of single molecular ruthenium catalysts during and after single turnover events of ring-opening metathesis polymerization is imaged through single-molecule superresolution tracking with a positional accuracy of ±32 nm. This tracking is achieved through the real-time incorporation of spectrally tagged monomer units into active polymer chain ends during living polymerization; thus, by design, only active-catalyst motion is detected and imaged, without convolution by inactive catalysts. The catalysts show diverse individualistic diffusive behaviors with respect to time that persist for up to 20 s. Catalysts occupy three mobility populations: quasi-stationary (23%), intermediate (53%, 65 nm), and large (24%, 145 nm) step sizes. Differences in catalyst mobility populations also exist between individual aggregates (p < 0.001). Such differential motion indicates widely different local catalyst microenvironments during the catalytic turnover. These mobility differences are uniquely observable through single-catalyst microscopy and are not measurable through traditional ensemble analytical techniques for characterizing the behavior of molecular catalysts, such as nuclear magnetic resonance spectroscopy. The measured distributions of active molecular catalyst motions would not be readily predictable through modeling or first-principles, and the range likely impacts individual catalyst turnover rate and selectivity. This range plausibly contributes to property distributions observable in bulk polymers, such as molecular weight polydispersity (e.g., 1.9 in this system), leading to a revised understanding of the mechanistic, microscale origins of macroscale polymer properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Predictive coarse-grained (CG) modeling of morphologies in polymer nanocomposites with specific and directional intermolecular interactions (Final Report)

The overarching goal of the proposed work was to develop predictive models for investigating structure and dynamics in soft materials with chemistries that have specific and directional molecular interactions. The motivation behind studying materials with specific and directional interactions lies in the many desirable features these interactions provide when designing novel soft materials. Soft materials with specific and direction interactions (such as hydrogen bonds or H-bonds) can have a) thermally reversible phase behavior with different functions with varying temperature, b) precisely tuned nanostructure with desirable geometries that afford unique physical properties (e.g., color response, mechanical properties) and c) well-mixed/blended morphologies that are useful for variety of applications in energy field (e.g., materials for batteries require use of blended polymers where one domain gives superior mechanical properties and one domain promotes electrical conduction). Notably, biology makes extensive use of specific and directional interactions, in many cases based on H-bonds, to construct materials with precisely defined architectures and properties. Engineered soft materials with precisely tuned nanostructures and improved processiblity through thermoresponsive phase behavior are useful in numerous applications that are relevant to the Department of Energy (DOE) including high efficiency electronic devices, light-weight high-strength composite materials for batteries and fuel cells, and polymer membranes for separations, etc. While past computational studies have been tremendously useful in understanding molecular phenomena and guiding synthesis of new macromolecular soft materials for a wide variety of applications, the inability to capture small scale specific and directional interactions alongside macromolecular length and time scales represented a key limitation of most studies to date. Our work in this project addressed this grand challenge in computational materials chemistry, i.e., ability to model the anisotropic, directional, and specific interactions that govern the behavior of many macromolecular soft matter systems of interest, thus, has greatly expanded the predictive potential of simulations. Specifically the key outcomes were: successful development of new coarse-grained (CG) polymer models to study generic and specific polymer chemistries in which hydrogen-bonding interactions are dominant. These CG models were then used in molecular simulations to study structure and thermodynamics in polymer nanocomposites and blends; some studies were conducted in collaboration with experimentalists. We also published a perspective and a viewpoint which included some of the work we completed in this DOE project; we believe these perspective and viewpoint articles guide other researchers in the soft materials community on how to extend the computational approaches and models we have developed for the purposes of their studies.

36 MATERIALS SCIENCE↗

NASA NTRS2004

Self-Healing Behavior of Ethylene-Based Ionomers

The self-healing behavior of poly(ethylene-co-methacrylic acid) (EMAA)-based ionomers holds tremendous potential for use in a wide variety of unique applications. However, to effectively utilize this self-healing behavior and to design novel materials which possess this ability, the mechanism by which they heal must first be understood ionomers are a class of polymers that can be described as copolymers containing less than 15 mol% ionic content whereby the bulk properties are governed by ionic interactions within the polymer. These ionic groups aggregate into discrete regions known as multiplets which overlap forming clusters that act as physical cross-links profoundly influencing the bulk physical properties. These clusters possess an order-disorder transition (T(sub i)) where the clustered regions may rearrange themselves given time and stimuli. Recognizing the strong influence of these ionic regions on other well understood ionomer properties, their role in self-heating behavior will be assessed. The self-healing behavior is observed following projectile puncture. It has been suggested that during impact energy is passed to the ionomer material, heating it to the melt state. After penetration, it is proposed that the ionic regions maintain their attractions and flow together patching the hole. Thus, the importance of this ionic character and is unique interaction must be established. This will be accomplished through examination of materials with varying ionic content and through the analysis of the T(sub i). The specific ionomer systems examined include a number of ethylene-based materials. Materials of varying ionic content, including the non-ionic base copolymers, will be examined by peel tests, projectile impact and DSC analysis. The information will also be compared with some basic data on LDPE material.

Kalista, Stephen J., Jr.↗

DOE OSTI2026

Tuning Anion Composition and Mobility to Balance Ionic Conductivity and Cation Selectivity in Solid Polymer Electrolytes

Solid polymer electrolytes (SPEs) offer a promising route toward safe and high-performance electrochemical energy storage, yet a fundamental challenge in SPEs involves improving ionic conductivity while maintaining selective cation transport. The hurdle exists because ion transport is typically coupled closely to polymer segmental dynamics. Herein, a glassy single-ion-conducting polymer, poly[lithium sulfonyl(trifluoromethane sulfonyl)imide methacrylate] (PLiMTFSI), in which the anions were tethered to the polymer, was blended with a flexible polymer, poly(oligo-oxyethylene methyl ether methacrylate) (POEM), and a series of small-molecule lithium salts, in which the anions were untethered [lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), lithium bis(fluorosulfonyl)imide (LiFSI), lithium trifluoromethanesulfonate (LiTf), or lithium perchlorate (LiClO 4 )]. The impact of salt anion volume and tethered-to-untethered anion ratio on the ion conduction behavior and thermal properties of blend electrolytes was investigated. In some cases, conductivity could be enhanced through this ternary blend approach. For example, a POEM-based polymer blend containing a bulky salt anion (TFSI⁻) and an equimolar mixture of PLiMTFSI and LiTFSI exhibited a Li + conductivity (4.8×10 -4 S/cm) an order of magnitude higher than that of a comparable POEM / LiTFSI system (6.3×10 -5 S/cm) at 100 °C. This enhancement was attributed to a more than ninefold increase in lithium transference number (0.66 in the ternary blend vs. 0.07 in POEM / LiTFSI). Overall, this study highlights the potential for tuning anion composition and mobility to achieve relatively high ionic conductivities and maintain selective cation transport in SPEs, offering a pathway to enable batteries that tolerate elevated temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Experimental Investigation on the Performance Loss of Cross-Linked Polymers During Photo-Oxidative Aging

Abstract Polymeric substances have seen an unprecedented integration in countless applications and fields of life, subjecting them to a broad range of environmental conditions, which can cause a form of damage to the structural and mechanical properties of these components known as aging. In this study we investigate the effects of the degradation of polymeric materials due to the extended exposure to sunlight, which can be simulated through controlled photo-oxidative aging using ultraviolet (UV) radiation as the main catalyst of this phenomenon. The effects on mechanical behavior and chemical properties of four polymeric materials with different mechanical characteristics was accordingly monitored throughout the study. The materials range in hardness with the polyurethane adhesive being the hardest and acting plastically, followed by an acrylic which exhibits greater hardening with time, a polyurethane sealant, which behaves in an elastomeric manner, and a silicon sealant, which is the softest of the set. Samples were prepared and subjected to UV radiation at three different temperatures namely 45, 60 and 80°C, for different aging periods ranging from 1 day for higher temperatures to 150 days for lower ones. The samples were then subjected to the Fourier transform Infrared spectroscopy (FTIR) test to monitor the change in the chemical composition of the materials along the aging durations and conditions. The materials were then subjected to mechanical testing along two modes of mechanical loading, which are a simple tension until failure and a double-cyclic test with progressively increasing strain limits after every two successful cycles until the sample reaches failure. The samples are loaded at constant strain rates throughout both tests. These tests revealed the change of behavior of our materials along the aging periods and conditions. The changes in mechanical behavior vary across each individual material depending on the aging temperature and period, with the changes ranging from hardening to softening, embrittlement or an increase in the maximum strain the material can endure before failure. A general trend would be that most materials become harder after photo-oxidation, however due to the range of temperatures in the aging conditions, thermo-oxidation, which causes softening in some of the polymers, has an increasingly notable effect at higher temperatures. A visible correlation can be noted between the change in mechanical behavior and a change in absorbance of Infrared Radiation (IR) in the FTIR spectrum, as the greater the crosslinking throughout the polymer matrix, the lower the absorbance of IR radiation due to the increased stiffness of the overall macro-molecular structure.

Korayem, Abd-Elrahman↗

DOE OSTI2023

Unveiling the Role of Compositional Drifts on the Tack of Pressure‐Sensitive‐Adhesives

Abstract Pressure‐sensitive‐adhesives (PSAs) are pervasive in electronic, automobile, packaging, and biomedical applications due to their ability to stick to numerous surfaces without undergoing chemical reactions. These materials are typically synthesized by the free radical copolymerization of alkyl acrylates and acrylic acid, leading to an ensemble of polymer chains with varying composition and molecular weight. Here, reversible addition−fragmentation chain‐transfer (RAFT) copolymerizations in a semi‐batch reactor are used to tailor the molecular architecture and bulk mechanical properties of acrylic copolymers. In the absence of cross‐links, the localization of acrylic acid toward the chain ends leads to microphase separation, creep resistance, and enhanced tack. However, in the presence of Al(acac) 3 crosslinker, the creep resistance remains unchanged and mostly the large‐strain mechanical properties are affected. This behavior is attributed to microphase separation, but also to a change in the energy required to break physical associations, and untangle and elongate associative polymers to large deformations.

Polymer Science↗

DOE OSTI2025

Mesoscale Modeling of Hydrogels Under Frictional Shear Stress

Hydrogels are three-dimensional networks of hydrophilic polymers often used as a simplified model of hydrated biological materials, from cartilaginous joints to the ocular tear film. However, the lubrication mechanisms of hydrogels remain poorly understood, partly due to their complex polymeric structure, which creates blurred interfaces during sliding that are challenging to study experimentally. In this study, we employ dissipative particle dynamics (DPD) to investigate the frictional behavior of a polymeric hydrogel network sliding against a solid wall in an explicit viscous solvent. This computational approach enables us to model hydrodynamic interactions and mesoscale polymer dynamics, capturing key aspects of hydrogel friction. Our simulations reveal that hydrogel friction is governed by the interplay between polymer relaxation and viscous shear, characterized by the Weissenberg number (Wi). At low Wi, friction coefficient remain nearly constant, dominated by polymer relaxation. However, at higher Wi, friction is dominated by viscous drag within a near-wall solvent layer, leading to a linear increase in friction coefficient with Wi. Furthermore, our results demonstrate an inverse relationship between the friction coefficient and the applied normal load, consistent with experimental observations. This work provides new insights into the fundamental tribological properties of hydrogels, shedding light on the micromechanics of hydrogel friction. Improving our understanding of hydrogel structure and dynamics under friction advances our knowledge of the mechanisms regulating biological lubrication in health and disease.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Polymer Composites Reinforced by Carbon-Allotrope Fillers for Selective Laser Sintering (SLS) - A Review

The limited commercial availability of applicable polymer powders has hindered the widespread implementation of SLS as a legitimate manufacturing method. This is partly due to the mechanism of SLS, which requires powders to meet rigid specifications if processing is to be successful. Furthermore, powders that do meet requirements are often incapable of producing quality, high-performance parts. Academic and industrial research has focused on composite development to overcome this problem. The incorporation of fillers including calcium carbonate, molybdenum disulfide, and aluminum have all been found to influence the processing behavior of PA12 powder and ultimately, the properties of the final part.3-5 Here, the thermal and mechanical properties of sintered composite parts produced using polymer powders reinforced by various carbon-based fillers is discussed.

36 MATERIALS SCIENCE↗

DOE OSTI2020

A Reversible Structural Phase Transition by Electrochemically-Driven Ion Injection into a Conjugated Polymer

We nd that conjugated polymers can undergo reversible structural phase transitions during electrochemical oxidation and ion injection. We study poly[2,5-bis(thiophenyl)-1,4-bis(2-(2-(2- methoxyethoxy)ethoxy)ethoxy)benzene] (PB2T-TEG), a conjugated polymer with glycolated side chains. Using grazing incidence wide angle X-ray scattering (GIWAXS), we show that, in contrast to previously known polymers, this polymer switches between two structurally distinct crystalline phases associated with electrochemical oxidation/reduction in an aqueous electrolyte. Importantly, we show that this unique phase change behavior has important physical consequences for ion transport. Notably, using moving front experi- ments visualized by both optical microscopy and super-resolution photoinduced force microscopy (PiFM), we show that a propagating ion front in PB2T-TEG exhibits non-Fickian transport, retaining a sharp step-edge prole, in stark contrast to the Fickian diusion more commonly observed. This structural phase transition is reminiscent of those accompanying ion uptake in inorganic materials like LiFePO4. We propose that engineering similar properties in future conjugated polymers may enable the realization of new materials with superior performance in electrochemical energy storage or neuromorphic memory applications.

Bischak, Connor G.↗

DOE OSTI2024

Clustering Effects on the Structure of Ionomer Solutions: A Combined SANS and Simulations Study

Ionic assemblies, or clusters, determine the structure and dynamics of ionizable polymers and enable their many applications. Fundamental to attaining well-defined materials is controlling the balance between van der Waals interactions that govern the backbone behavior and the forces that drive the formation of ionic clusters. Here, using small angle neutron scattering and fully atomistic molecular dynamics simulations, the structure of a model ionomer, sulfonated polystyrene in toluene solutions, was investigated as the cluster cohesion was tweaked by the addition of ethanol. The static structure factor was measured by both techniques and correlated with the size of the ionic clusters as the polymer concentration was varied. The conjunction of SANS results and molecular insight from MD simulations enabled the determination of the structure in these inhomogeneous networks on multiple length scales. Additionally, we find that across the entire concentration range studied, a network driven by the formation of ionic clusters was formed, where the size of the clusters drives the inhomogeneity of these systems. Tweaking the ionic clusters through the addition of ethanol impacts the packing of the sulfonated groups, their shape, and their size distribution, which in turn, affects the structure of these networks.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Self-assembled complex micelle phase stability in ABA-type triblock copolymers and related core-shell bottlebrushes

We report the synthesis and temperature-dependent morphologies of a series of polylactide--poly (-decalactone)--polylactide (LDL) triblock copolymers with M n = 16.0 – 18.1 kg / mol and volume fractions f L = 0.27 – 0.31 and associated core-shell bottlebrush (csBB) polymers, which derive from enchaining LDL triblocks through a polymerizable midchain functionality. While the LDL triblocks form micellar Frank-Kasper A15 and phases due to the conformational asymmetry of this monomer pair, the csBB morphologies sensitively depend on the backbone degree of polymerization ( N bb ). At low N bb values, micellar Frank-Kasper phases with the brush backbone situated in the matrix domain are stable, albeit with a modest reduction in the mean interfacial curvature evidenced by a to A15 order-to-order transition. However, larger N bb values drive csBBs to form hexagonally packed cylinders phases. This N bb -dependent phase behavior is rationalized in terms of a star-to-bottlebrush transition. At low N bb values, the csBBs are akin to star polymers with pointlike junctions that can support complex micelle packings. As N bb increases, the csBBs adopt cylindrical molecular geometries with extended backbones situated in the matrix domain that prefer hexagonally packed cylinders morphologies. Published by the American Physical Society 2024

Materials Science↗

DOE OSTI2025

Dynamic behavior of molecular Pd-acetate trimers and dimers in heterogeneous vinyl acetate synthesis

Vinyl acetate monomer (VAM) is a crucial intermediate in the production of various polymers. While molecular Pd-acetate trimers and dimers, such as Pd 3 (OAc) 6 and K 2 Pd 2 (OAc) 6 , are known to form on potassium acetate (KOAc)-promoted PdAu catalysts during heterogeneous VAM synthesis, their mechanistic role remains unclear. Here, we study the dynamics of different Pd-acetate species by utilizing in situ and operando crystallographic and spectroscopic characterizations combined with computational modeling on monometallic Pd model catalysts. The promoter-free catalyst expectedly shows low catalytic activity and VAM selectivity, corresponding to the complete reduction of Pdn(OAc) 2n species to form Pd 0 and PdC x nanoparticles. Conversely, noticeable quantities of K n Pd 2 (OAc) n+4 species remain on the KOAc-promoted catalyst, leading to smaller nanoparticle formation with 10 times the activity and double the selectivity for VAM. This study reveals that molecular Pd-acetate trimers and dimers are significant indicators of catalytic performance and highlights their structurally dynamic nature in heterogeneous vinyl acetate chemistry.

Jacobs, Hunter P. [Rice Univ., Houston, TX (United↗

NASA NTRS1974

Low-temperature relaxations in amorphous polyolefins

The dynamic mechanical relaxation behavior of two series of amorphous polyolefins, was investigated from 4.2 K to the glass transition. Most of the polymers show a damping maximum or plateau in the 40 to 50 K region. Various mechanisms which have been suggested for cryogenic relaxations in amorphous polymers are considered as they might relate to the polyolefins. Two secondary relaxation processes above 80 K are distinguished. A relaxation at about 160 K (beta) in the second and third member of each series is associated with restricted blackbone motion. This process requires a certain degree of chain flexibility since it is not observed in the first member of each series. A lower temperature process (gamma) is observed in each member of the second series and is attributed to motion of the ethyl side group.

Hiltner, A.↗

NASA NTRS1978

Production and analysis of thermal decomposition products from polymeric materials

A description is presented of a strategy for analyzing the combustion process and the degradation products which are formed. One of three primary objectives in the study of polymer degradation is related to the characterization of the material to be studied and the investigation of the thermal behavior of the material. Another objective is concerned with the definition of the nature of the decomposition process by identification and quantitation of the degradation products. The third objective involves the determination of the mechanism and kinetics of the decomposition process. The methods of sample degradation include pyrolysis, oxidative degradation, flaming combustion, and the use of large-scale combustion chambers. Methods of chemical separation and identification are considered, taking into account low-boiling volatiles, high-boiling volatiles, and ancillary techniques.

Chatfield, D. A.↗

NASA NTRS1981

Acoustic emission monitoring of polymer composite materials

The techniques of acoustic emission monitoring of polymer composite materials is described. It is highly sensitive, quasi-nondestructive testing method that indicates the origin and behavior of flaws in such materials when submitted to different load exposures. With the use of sophisticated signal analysis methods it is possible the distinguish between different types of failure mechanisms, such as fiber fracture delamination or fiber pull-out. Imperfections can be detected while monitoring complex composite structures by acoustic emission measurements.

Bardenheier, R.↗